Guest

Cisco 10000 Series Routers

Cisco IOS Software Release 12.2(4)BZ1 Release on Cisco 10000

Table Of Contents

Product Bulletin No. 1873

Overview

Features in Cisco IOS Software Release 12.2(4)BZ1

Protocols

Scalability

AAA and Address Assignment

Accounting, Network Management, and Configuration

Detailed Information

Download Information

Ordering Information


Product Bulletin No. 1873


Cisco IOS Software Release 12.2(4)BZ1
    Release on Cisco 10000 Series

Overview

The release of Cisco IOS software enhances the unified edge aggregation solution currently available on the Cisco 10000 series Internet Router by introducing Remote Access to MPLS VPNs for broadband access applications, PPPoE over Ethernet/802.1q VLANs for Metro Ethernet access applications, IP Multicast for packet replication at the network edge, and IP QoS for service differentiation. In addition, Managed LNS, which affords operating companies the ability to host multiple unique LNSs in a Cisco 10000 series Internet Router, is incorporated into the release as an enhancement to the product's previously introduced LNS/Home Gateway capability.

The introduction of Remote Access to MPLS VPNs and PPPoE over Ethernet/802.1q VLANs marks the Cisco 10000's initial introduction and support for broadband access wholesale service models. The former represents a generational and technological advancement in broadband aggregation wholesale services as it upgrades the previously deployed static L2TP Access Concentrator (LAC) service architecture to the more dynamic direct mapping of PPPoX based subscribes directly into MPLS VPNs. The latter provides the Cisco 10000 the requisite functionality to address the rapidly emerging Metro Ethernet market.

Features in Cisco IOS Software Release 12.2(4)BZ1

The following features and improvements are supported in Cisco IOS software release 12.2(4)BZ1 to provide broadband aggregation:

Protocols

The standard protocols supported by the Cisco 10000 series plus the ones introduced in this IOS release supports the following protocols for edge aggregation:

PPPoX Sessions Encapsulated in L2TP Tunnels

PPPoX Sessions Encapsulated in MPLS VPNs (NEW)

PPPoE Sessions Encapsulated in Ethernet/802.1q VLANs (NEW)

PPPoX Termination

Routing with Bridged Encapsulation (RBE)

PPPoX and RBE Autosense for LLC/SNAP Encapsulation

PPPoX Autosense for SNAP

PPPoX Autosense for MUX Encapsulation

PPPoE and RBE on a VC

IP Multicast

IP QoS

Scalability

Scalability for edge aggregation for the Cisco 10000 series includes support for the following:

Up to 32,000 L2TP tunneled PPP sessions or PTA subscribers

Up to 32,000 PPP sessions for MPLS VPNs (NEW)

Up to 32,000 PPPoE sessions for Ethernet/802.1q VLANs (NEW)

Up to 32,000 VCs (in High VC Count mode only)

Up to 4000 VCs (in Low VC count mode with full functionality)

Up to 3200 L2TP tunnels

Up to 99 Managed LNSs each with independent AAA support (NEW)

Up to 99 VRFs with independent AAA support

Up to 99 VRFs (NEW)

Up to 1024 Ethernet/802.1q VLANs (NEW)

Up to 300 Multicast groups with up to 1000 streams (NEW)

AAA and Address Assignment

The following new AAA and address assignment features are supported in this release:

PAP/CHAP authentication

RADIUS based authentication

IP address assignment from local pools (both configured via CLI and downloaded via RADIUS)

IP Address assignment from RADIUS Servers (as part of AAA)

DHCP relay agent support for unnumbered interfaces

RADIUS request with VPI/VCI information

RADIUS attribute screen/filter (NEW)

RADIUS domain-name stripping per VRF (NEW)

VPDN session limit per VRF (NEW)

VRFs with independent AAA support (NEW)

Accounting, Network Management, and Configuration

New router accounting, management, and configuration features in this release include:

Range based CLI

Support for Cisco-VPDN-MGMT-MIB

RADIUS interim accounting

RADIUS VPI/VCI accounting

Configuration via RADIUS AV pairs

Detailed Information

For more detailed information about the platforms and fixes being delivered in 12.2(4)BZ1, please refer to the following document:

http://www.cisco.com/univercd/cc/td/doc/product/aggr/10000/10krn/rn2_0bba.htm

Download Information

Customers can download Cisco IOS Release 12.2(4)BZ1 software from Cisco Connection Online (CCO) in the software Image library:

http://www.cisco.com/pcgi-bin/Software/Iosplanner/Planner-tool/iosplanner.cgi?majorRel=12.0

Ordering Information

Platform
Product Description
Product Code
Image
Flash
DRAM
Cisco 10000

Cisco 10000 Series IOS Broadband 8K Users

S10KZ11A-1204BZ1

c10k-p11-mz

40 MB

512 MB

Cisco 10000

Cisco 10000 Series IOS Broadband 16K Users

S10KZ11B-1204BZ1

c10k-p11-mz

40 MB

512 MB

Cisco 10000

Cisco 10000 Series IOS Broadband 32K Users

S10KZ11C-1204BZ1

c10k-p11-mz

40 MB

512 MB

Cisco 10000

Cisco 10000 Series IOS Broadband 8K to 16K Users Upgrade

S10KZ11-1204BZ1-U16K=

c10k-p11-mz

40 MB

512 MB

Cisco 10000

Cisco 10000 Series IOS Broadband 8K to 32K Users Upgrade

S10KZ11-1204BZ1-U8-32K=

c10k-p11-mz

40 MB

512 MB

Cisco 10000

Cisco 10000 Series IOS Broadband 16K to 32K Users Upgrade

S10KZ11-1204BZ1-U32K=

c10k-p11-mz

40 MB

512 MB


This product bulletin describes new features introduced in Cisco IOS software Release 12.2(4)BZ1 for the Cisco 10000 series next generation Internet Router.