Table Of Contents
Cisco VG248 Analog Phone Gateway Version 1.1(1) Release Notes
February 15, 2002
These release notes are for use with the Cisco VG248 Analog Phone Gateway with software version 1.1(1). The VG248 enables you to integrate analog telephony devices with Cisco CallManager IP telephony systems. With this release, you can also use the VG248 to integrate existing voice mail systems with Cisco CallManager using SMDI.
These release notes provide the following information:
New and Changed Information
The following topics describe new or changed features in version 1.1(1) of the VG248 software:
SMDI Support for Voice Mail Integration
You can use the VG248 with v1.1(1) software to integrate your existing voice mail systems (such as Lyrix, Octel 200, Octel 250, Octel 300 and Octel 350) and legacy PBX systems with Cisco CallManager. See Chapter 5, "Integrating Cisco CallManager with Voice Mail Systems Using SMDI" in the Cisco VG248 Analog Phone Gateway Software Configuration Guide for details:
Support for Italian Phones
The VG248 now supports the tones, cadences and telephone impedances used by standard Italian phones. Countries previously supported include: North America (USA and Canada), United Kingdom, Germany, France, Austria, and Switzerland.
Call Forward Dial-Tone
When forward all is activated, users now hear a distinctive dial tone to indicate that all calls are currently being forwarded to a different directory number.
Table 1 provides summaries and locations of available documents for the Cisco VG248 Analog Phone Gateway.
Table 1 Available Documentation for the Cisco VG248
Document Title Description Where to Find It
Cisco VG248 Analog Phone Gateway Hardware Installation Guide
Provides the site preparation, safety information, and hardware installation and setup instructions to safely install the VG248.
•In the box—A printed version of this document ships with the product
•Online at Cisco.com—HTML and PDF versions of this document are available from Cisco.com:
•By ordering—See the "Obtaining Documentation" section for details
Cisco VG248 Analog Phone Gateway Software Configuration Guide
Provides information about understanding, configuring, managing, and troubleshooting the VG248.
Online at Cisco.com—HTML and PDF versions of this document are available from Cisco.com:
Cisco VG248 Analog Phone Gateway Version 1.1(1) Release Notes
Describes known caveats and any documentation errata for the VG248.
Online at Cisco.com—HTML and PDF versions of this document are available from Cisco.com:
Updates to Cisco CallManager Compatibility
You configure the VG248 differently depending on the version of Cisco CallManager you are using in your network. Refer to these sections for tips on using the VG248 with your version of Cisco CallManager:
Using Cisco CallManager Version 3.1
The Cisco VG248 Analog Phone Gateway Software Configuration Guide provides the information needed to use the VG248 with Cisco CallManager 3.1. Refer to the "Documentation Roadmap" section for information on obtaining this document.
To use auto-registration with the VG248 and Cisco CallManager 3.1, you must use Cisco CallManager 3.1(3a), which is available at the following location on Cisco.com: http://www.cisco.com/cgi-bin/tablebuild.pl/callmgr-31.
Using Cisco CallManager Version 3.2
Cisco CallManager 3.2 includes some interface changes that require you to manage the VG248 slightly differently than with Cisco CallManager 3.1. These sections provide details about these changes:
Changes to the Cisco CallManager Interface
When using the VG248 with Cisco CallManager 3.2, you have access to new features, including:
•The addition of a VG248 gateway type
This allows you to add the device as a gateway to Cisco CallManager and configure each of the ports as VGC phone models. This consolidates each of the 48 analog or SMDI ports onto a single device. However, once you add the gateway and ports to Cisco CallManager, you still must configure these ports in the VG248 interface. See the "Adding the VG248 Gateway to Cisco CallManager" section for details.
•An additional port, port 00[VMI] appears on the VG248 Gateway Configuration window.
This port appears if you are using the VG248 to integrate analog or SMDI devices. However, the VG248 uses this port only when setting or clearing MWIs on phones using SMDI. See the "Configuring VG248 Analog Ports" section for details on configuring ports.
When using the VG248 with Cisco CallManager 3.2, these important caveats apply:
•You cannot use auto-registration to add a VG248 to Cisco CallManager 3.2.
You must add the VG248 to Cisco CallManager manually. See the "Adding the VG248 Gateway to Cisco CallManager" section for details.
•If you are upgrading to Cisco CallManager 3.2 from Cisco CallManager 3.1, and you already have a VG248 configured in the database, the information is retained.
During the upgrade process, Cisco CallManager automatically creates a new VG248 gateway device based on the port information you entered in Cisco CallManager 3.1
•On the VG248 gateway configuration page in Cisco CallManager, the Reset Device button does not work.
•When configuring the VG248 ports as VGC phone models, additional fields that are not used by the VG248 appear, including:
–Line text label
–MW lamp policy
You can ignore these fields; they are not used by the VG248.
•If you perform a search for the VG248 gateway type (from Device > Gateway in Cisco CallManager Administration) the results indicate "Device Not Found".
Although you cannot locate the device using the gateway search, you can search for the VGC phone model.
•After configuring one port (VGC phone) on the VG248, Cisco CallManager provides the option to "Configure all ports like Port 1".
If you use this option, Cisco CallManager automatically configures 49 ports, rather than 48. You can delete port 49; it is not functional.
Adding the VG248 Gateway to Cisco CallManager
With Cisco CallManager 3.2, you must manually add the VG248 as a gateway following this procedure:
Step 1 In Cisco CallManager, choose Devices > Add a New Device > Cisco VG248 Gateway.
Step 2 Enter this information for the gateway:
•MAC Address—Enter the last 10 digits of the Media Access Control (MAC) address for the VG248.
Only one MAC address exists for the Cisco VG248 Analog Phone Gateway, but Cisco CallManager requires unique MAC addresses for all devices. By entering only 10 digits of the MAC address, Cisco CallManager is able to use the MAC address for the gateway and append additional information to it to create the MAC addresses for the VGC phones. See the "Configuring VG248 Analog Ports" section for details.
•Description—Enter the purpose of the device, such as VG248 gateway.
Step 3 Click Insert.
Step 4 Choose 48_PORTS from the Installed Ports section.
Step 5 Click on a port to configure.
Step 6 Configure each port as described in the "Configuring VG248 Analog Ports" section.
Configuring VG248 Analog Ports
Each port on the VG248 corresponds to an analog or SMDI device in your IP telephony network. To manage these devices using Cisco CallManager you must add each port to the Cisco CallManager database. To Cisco CallManager, each port is recognized and handled as a phone. For example, if you have 48 devices connected to the VG248, you must add and configure 48 ports to Cisco CallManager. Cisco CallManager recognizes 48 separate phones connected to it.
Note Ports 1-48 are available for use with analog devices or for SMDI connections. If you are using the VG248 with SMDI, port 00 is used to transmit and receive voice mail messages to Cisco CallManager. If you are using the VG248 for analog devices only, this port appears, but it is not functional.
Before You Begin
This procedure is identical in Cisco CallManager 3.1 and 3.2 and is also described in the Cisco VG248 Analog Phone Gateway Software Configuration Guide. It is included here for your convenience.
However, this procedure describes the process for adding analog ports to Cisco CallManager. If you are using the VG248 to integrate SMDI devices with Cisco CallManager, you must refer to the detailed procedures included in the software guide. See Chapter 5, "Integrating Cisco CallManager with Voice Mail Systems Using SMDI" in the Cisco VG248 Analog Phone Gateway Software Configuration Guide for details:
Step 1 Enter the appropriate fields, following these recommendations:
•The MAC address automatically appears based on the MAC address of the VG248, according to these guidelines:
–The first two digits of the MAC address are dropped.
–The number is shifted two places to the left.
–The two-digit port number is added to the right.
•Use the host name or other name for the Description for each port. For ease of administration, use a similar name for ports configured on the same VG248.
•Consider adding a descriptive line to the Display field, such as "Analog phone."
Step 2 Click Insert.
Step 3 To add a directory number to this phone, click OK and enter the appropriate settings.
If you need assistance entering the directory number information, refer to the documentation and online help included with Cisco CallManager for details.
Fax Over IP Support
The VG248 supports fax pass-through and Cisco fax relay using the Skinny Client Control Protocol (SCCP). For detailed information about fax support on this and other Cisco voice gateways, refer to the Implementing Fax Over IP on Cisco Voice Gateways document available from Cisco.com at the following location:
Table 2 includes the list of caveats from the VG248 1.0(2) that have been resolved with this software update (1.1(1)).
Open caveats are unexpected behaviors or defects in the software releases for a product. Table 3 contains information about known problems for the VG248.
If you have a Cisco.com account, you can search for known problems on the Cisco bug tracking system tool, called Bug Toolkit. To access Bug Toolkit do one of the following tasks using a web browser:
•Log in to Cisco.com and choose Service & Support > Technical Support Help-Cisco TAC > Tool Index > Software Bug Toolkit.
The following sections explain how to obtain documentation from Cisco Systems.
World Wide Web
You can access the most current Cisco documentation on the World Wide Web at the following URL:
Translated documentation is available at the following URL:
Cisco documentation and additional literature are available in a Cisco Documentation CD-ROM package, which is shipped with your product. The Documentation CD-ROM is updated monthly and may be more current than printed documentation. The CD-ROM package is available as a single unit or through an annual subscription.
Cisco documentation is available in the following ways:
•Registered Cisco Direct Customers can order Cisco product documentation from the Networking Products MarketPlace:
•Registered Cisco.com users can order the Documentation CD-ROM through the online Subscription Store:
•Nonregistered Cisco.com users can order documentation through a local account representative by calling Cisco corporate headquarters (California, USA) at 408 526-7208 or, elsewhere in North America, by calling 800 553-NETS (6387).
If you are reading Cisco product documentation on Cisco.com, you can submit technical comments electronically. Click Leave Feedback at the bottom of the Cisco Documentation home page. After you complete the form, print it out and fax it to Cisco at 408 527-0730.
You can e-mail your comments to email@example.com.
To submit your comments by mail, use the response card behind the front cover of your document, or write to the following address:
Attn: Document Resource Connection
170 West Tasman Drive
San Jose, CA 95134-9883
We appreciate your comments.
Obtaining Technical Assistance
Cisco provides Cisco.com as a starting point for all technical assistance. Customers and partners can obtain documentation, troubleshooting tips, and sample configurations from online tools by using the Cisco Technical Assistance Center (TAC) Web Site. Cisco.com registered users have complete access to the technical support resources on the Cisco TAC Web Site.
Cisco.com is the foundation of a suite of interactive, networked services that provides immediate, open access to Cisco information, networking solutions, services, programs, and resources at any time, from anywhere in the world.
Cisco.com is a highly integrated Internet application and a powerful, easy-to-use tool that provides a broad range of features and services to help you to
•Streamline business processes and improve productivity
•Resolve technical issues with online support
•Download and test software packages
•Order Cisco learning materials and merchandise
•Register for online skill assessment, training, and certification programs
You can self-register on Cisco.com to obtain customized information and service. To access Cisco.com, go to the following URL:
Technical Assistance Center
The Cisco TAC is available to all customers who need technical assistance with a Cisco product, technology, or solution. Two types of support are available through the Cisco TAC: the Cisco TAC Web Site and the Cisco TAC Escalation Center.
Inquiries to Cisco TAC are categorized according to the urgency of the issue:
•Priority level 4 (P4)—You need information or assistance concerning Cisco product capabilities, product installation, or basic product configuration.
•Priority level 3 (P3)—Your network performance is degraded. Network functionality is noticeably impaired, but most business operations continue.
•Priority level 2 (P2)—Your production network is severely degraded, affecting significant aspects of business operations. No workaround is available.
•Priority level 1 (P1)—Your production network is down, and a critical impact to business operations will occur if service is not restored quickly. No workaround is available.
Which Cisco TAC resource you choose is based on the priority of the problem and the conditions of service contracts, when applicable.
Cisco TAC Web Site
The Cisco TAC Web Site allows you to resolve P3 and P4 issues yourself, saving both cost and time. The site provides around-the-clock access to online tools, knowledge bases, and software. To access the Cisco TAC Web Site, go to the following URL:
All customers, partners, and resellers who have a valid Cisco services contract have complete access to the technical support resources on the Cisco TAC Web Site. The Cisco TAC Web Site requires a Cisco.com login ID and password. If you have a valid service contract but do not have a login ID or password, go to the following URL to register:
If you cannot resolve your technical issues by using the Cisco TAC Web Site, and you are a Cisco.com registered user, you can open a case online by using the TAC Case Open tool at the following URL:
If you have Internet access, it is recommended that you open P3 and P4 cases through the Cisco TAC Web Site.
Cisco TAC Escalation Center
The Cisco TAC Escalation Center addresses issues that are classified as priority level 1 or priority level 2; these classifications are assigned when severe network degradation significantly impacts business operations. When you contact the TAC Escalation Center with a P1 or P2 problem, a Cisco TAC engineer will automatically open a case.
To obtain a directory of toll-free Cisco TAC telephone numbers for your country, go to the following URL:
Before calling, please check with your network operations center to determine the level of Cisco support services to which your company is entitled; for example, SMARTnet, SMARTnet Onsite, or Network Supported Accounts (NSA). In addition, please have available your service agreement number and your product serial number.
CCIP, the Cisco Powered Network mark, the Cisco Systems Verified logo, Cisco Unity, Fast Step, Follow Me Browsing, FormShare, Internet Quotient, iQ Breakthrough, iQ Expertise, iQ FastTrack, the iQ Logo, iQ Net Readiness Scorecard, Networking Academy, ScriptShare, SMARTnet, TransPath, and Voice LAN are trademarks of Cisco Systems, Inc.; Changing the Way We Work, Live, Play, and Learn, Discover All That's Possible, The Fastest Way to Increase Your Internet Quotient, and iQuick Study are service marks of Cisco Systems, Inc.; and Aironet, ASIST, BPX, Catalyst, CCDA, CCDP, CCIE, CCNA, CCNP, Cisco, the Cisco Certified Internetwork Expert logo, Cisco IOS, the Cisco IOS logo, Cisco Press, Cisco Systems, Cisco Systems Capital, the Cisco Systems logo, Empowering the Internet Generation, Enterprise/Solver, EtherChannel, EtherSwitch, GigaStack, IOS, IP/TV, LightStream, MICA, the Networkers logo, Network Registrar, Packet, PIX, Post-Routing, Pre-Routing, RateMUX, Registrar, SlideCast, StrataView Plus, Stratm, SwitchProbe, TeleRouter, and VCO are registered trademarks of Cisco Systems, Inc. and/or its affiliates in the U.S. and certain other countries.
All other trademarks mentioned in this document or Web site are the property of their respective owners. The use of the word partner does not imply a partnership relationship between Cisco and any other company. (0201R)
Copyright © 2002, Cisco Systems, Inc.
All rights reserved.