Cisco CallManager Serviceability System Guide, Release 3.3(3)
Cisco Discovery Protocol Support

Table Of Contents

Cisco Discovery Protocol Support

CDP Advertisement Support

Default CDP Setting

CDP Driver System Prerequisites

Use the CDP Driver

Access CDP Driver Control

Install the CDP Protocol Driver

Locate Updated CDP Driver and Interface Files

CDP Configuration Checklist

Where to Find More Information


Cisco Discovery Protocol Support


This chapter provides general information for Cisco Discovery Protocol (CDP) and contains the following topics:

CDP Advertisement Support

CDP Configuration Checklist

Where to Find More Information

Cisco Discovery Protocol discovers Cisco devices on a network. CDP enables discovery of Cisco CallManager servers and management of those servers by CiscoWorks2000.

CDP Advertisement Support

With CDP Advertisement Support, Cisco CallManager periodically sends out CDP messages on the active interface to a designated multicast address. These messages contain information such as device identification, interface name, system capabilities, SNMP agent address, and time to live.

Any Cisco device with CDP support can locate a Cisco CallManager by using these periodic messages. For example, a device can locate Cisco CallManager agent IP addresses using the CDP cache from the direct neighboring devices.

Default CDP Setting

Table 21-1 provides the default CDP settings.

Table 21-1 Default CDP Settings 

Description
Default Value

Default Transmit Frequency

60 seconds

Default Time to Live

180 seconds

Default State

CDP advertisement enabled


CDP Driver System Prerequisites

CDP designates a Windows 2000 Protocol Driver designed to run with Cisco CallManager on a Cisco Media Convergence Server with a 10/100BaseT Ethernet network interface card. It does not support other media, such as Token Ring, ATM, or Windows NT platforms (including Windows 98 or Windows NT 4.0).

Use the CDP Driver

Starting Cisco CallManager enables the CDP driver. You can use CDP to allow CiscoWorks2000 to discover and manage your Cisco CallManager systems.


Note For more information, see the SNMP Management Information Base, page 17-2.


Access CDP Driver Control

You can control the CDP driver using the CISCO-CDP-MIB. For more information, see the SNMP Management Information Base, page 17-2.

When you are using CiscoWorks2000, you must keep the CDP driver enabled at all times to discover Cisco CallManager.

Install the CDP Protocol Driver

The Cisco CallManager installation process installs the CDP driver. When a successful Cisco CallManager installation completes, the CDP protocol driver resides in the list of device drivers under the Windows 2000 control panel.

Locate Updated CDP Driver and Interface Files

Installing Cisco CallManager updates the following components:

The CDP driver (cdp.sys).

The CDP Interface Library (cdpintf.dll).

A Backup Regedit export file for reinstalling CDP registries (cdp2k101.reg). Use this file to restore the CDP registry if it becomes corrupted.


Note After running the cdp2k101.reg file, you must perform a system reset to restore the CDP registries.


CDP Configuration Checklist

Table 21-2 provides an overview of the steps for configuring Cisco Discovery Protocol.

Table 21-2 CDP Configuration Checklist 

Configuration Steps
Related Procedures and Topics

Step 1 

Review the CiscoWorks2000 user documentation for information on the Cisco Discovery Protocol.

http://www.cisco.com/univercd/cc/td/doc/product/rtrmgmt/cw2000/index.htm

Step 2 

Ensure CDP designates the Windows 2000 Protocol Driver.

http://www.cisco.com/univercd/cc/td/doc/product/rtrmgmt/cw2000/index.htm

Step 3 

Install the CDP protocol driver.

Installing the CDP Protocol Driver, Cisco CallManager Serviceability Administration Guide

Step 4 

Start the CDP protocol driver.

Starting the CDP Protocol Driver, Cisco CallManager Serviceability Administration Guide

Step 5 

Enable the CDP driver.

Enabling the CDP Protocol Driver, Cisco CallManager Serviceability Administration Guide

Simple Network Management Protocol Configuration, Cisco CallManager Serviceability Administration Guide


Where to Find More Information

Related Topics

Chapter 17, "Simple Network Management Protocol"

"CiscoWorks2000"

"Overview of CiscoWorks2000," Cisco CallManager Serviceability Administration Guide

"Cisco Discovery Protocol Support Configuration," Cisco CallManager Serviceability Administration Guide

Additional Cisco Documentation

CiscoWorks2000 user documentation

http://www.cisco.com/univercd/cc/td/doc/product/rtrmgmt/cw2000/index.htm