Supported MIBs
This appendix lists the supported management information base (MIBs) for this release on the Catalyst 3750-X or 3560-X switch. It contains these sections:
MIB List
Note The BRIDGE-MIB supports the context of a single VLAN. By default, SNMP messages using the configured community string always provide information for VLAN 1. To obtain the BRIDGE-MIB information for other VLANs, for example VLAN n, use this community string in the SNMP message: configured community string @n.
-
CISCO-ADMISSION-POLICY-MIB
-
CISCO-AUTHMEWORK-MIB
-
CISCO-CABLE-DIAG-MIB
-
CISCO-CDP-MIB
-
CISCO-CLUSTER-MIB
-
CISCO-CONFIG-COPY-MIB
-
CISCO-CONFIG-MAN-MIB
-
CISCO-DHCP-SNOOPING-MIB
-
CISCO-ENHANCED-LICENSING-MIB
-
CISCO-ENTITY-FRU-CONTROL-MIB
-
CISCO-ENTITY-VENDORTYPE-OID-MIB
-
CISCO-ENVMON-MIB
-
CISCO-ERR-DISABLE-MIB
-
CISCO-FLASH-MIB (Flash memory on all switches is modeled as removable flash memory.)
-
CISCO-FTP-CLIENT-MIB
-
CISCO-HSRP-MIB (not supported on switches running the LAN Base feature set)
-
CISCO-HSRP-EXT-MIB (partial support)
-
CISCO-IETF-IP-MIB (Only with the IP services feature set)
-
CISCO-IETF-IP-FORWARDING-MIB (Only with the IP services feature set)
-
CISCO-IETF-ISIS-MIB (Only with the IP services feature sets)
-
CISCO-IF-EXTENSIONS-MIB
-
CISCO-IGMP-FILTER-MIB
-
CISCO-IMAGE-MIB (Only stack master feature set details are shown.)
-
CISCO IP-STAT-MIB
-
CISCO-L2L3-INTERFACE-CONFIG-MIB
-
CISCO-LAG-MIB
-
CISCO-MAC-AUTH-BYPASS-MIB
-
CISCO-MAC-NOTIFICATION-MIB
-
CISCO-MEMORY-POOL-MIB (Only stack master feature set details are shown.)
-
CISCO-NAC-NAD-MIB
-
CISCO-PAE-MIB
-
CISCO-PAGP-MIB
-
CISCO-PING-MIB
-
CISCO-PORT-QOS-MIB (the cportQosStats Table returns the values from the octets and packet counters, depending on switch configuration)
-
CISCO-PORT-STORM-CONTROL-MIB
-
CISCO-PRIVATE-VLAN-MIB (not supported on switches running the LAN Base feature set)
-
CISCO-POWER-ETHERNET-EXT-MIB
-
CISCO-PROCESS-MIB (Only stack master details are shown.)
-
CISCO-PRODUCTS-MIB
-
CISCO-RTTMON-MIB
-
CISCO-SLB-MIB (Only with the IP services feature sets)
-
CISCO-SMI-MIB
-
CISCO-STACK-MIB (Partial support on 3750-X switches: for some objects, only stack master information is supported. ENTITY MIB is a better alternative.)
-
CISCO-STACKMAKER-MIB (Catalyst 3750-X switches only)
-
CISCO-STACKWISE-MIB (Catalyst 3750-X switches only)
-
CISCO-STP-EXTENSIONS-MIB
-
CISCO-SYSLOG-MIB
-
CISCO-TC-MIB
-
CISCO-TCP-MIB
-
CISCO-UDLDP-MIB
-
CISCO-VLAN-IFTABLE-RELATIONSHIP-MIB
-
CISCO-VLAN-MEMBERSHIP-MIB
-
CISCO-VTP-MIB
-
ENTITY-MIB
-
ETHERLIKE-MIB
-
IEEE8021-PAE-MIB
-
IEEE8023-LAG-MIB
-
IF-MIB (In and out counters for VLANs are not supported.)
-
IGMP-MIB
-
INET-ADDRESS-MIB
-
IPMROUTE-MIB (not supported on switches running the LAN Base feature set)
-
OLD-CISCO-CHASSIS-MIB (Partial support on Catalyst 3760-X stacking-capable switches; some objects reflect only the stack master.)
-
OLD-CISCO-CPU-MIB
-
OLD-CISCO-FLASH-MIB (Supports only the stack master in a switch stack. Use CISCO-FLASH_MIB.)
-
OLD-CISCO-INTERFACES-MIB
-
OLD-CISCO-IP-MIB
-
OLD-CISCO-SYS-MIB
-
OLD-CISCO-TCP-MIB
-
OLD-CISCO-TS-MIB
-
PIM-MIB (not supported on switches running the LAN Base feature set)
-
RFC1213-MIB (Functionality is as per the agent capabilities specified in the CISCO-RFC1213-CAPABILITY.my.)
-
RFC1253-MIB (OSPF-MIB) (not supported on switches running the LAN Base feature set)
-
RMON-MIB
-
RMON2-MIB
-
SNMP-FRAMEWORK-MIB
-
SNMP-MPD-MIB
-
SNMP-NOTIFICATION-MIB
-
SNMP-TARGET-MIB
-
SNMPv2-MIB
-
TCP-MIB
-
UDP-MIB
Note For information about MIB support for a specific Cisco product and release, go to the MIB Locator tool at this URL:
http://tools.cisco.com/ITDIT/MIBS/MainServlet
Using FTP to Access the MIB Files
You can get each MIB file by using this procedure:
Step 1 Make sure that your FTP client is in passive mode.
Note Some FTP clients do not support passive mode.
Step 2 Use FTP to access the server
ftp.cisco.com
.
Step 3 Log in with the username anonymous.
Step 4 Enter your e-mail username when prompted for the password.
Step 5 At the
ftp>
prompt, change directories to /pub/mibs/v1
and
/pub/mibs/v2
.
Step 6 Use the
get
MIB_filename
command to obtain a copy of the MIB file.