New and Changed Information

New and Changed Information

This chapter provides release-specific information for each new and changed feature in the Cisco Nexus 5500 Series NX-OS QoS Command Reference. The latest version of this document is available at the following Cisco website:

http://www.cisco.com/en/US/products/ps9670/prod_command_reference_list.html

To check for additional information about this Cisco NX-OS Release, see the Cisco Nexus 5500 Series NX-OS Release Notes, Release 7.0 available at the following Cisco website:

http://www.cisco.com/c/en/us/support/switches/nexus-5000-series-switches/products-release-notes-list.html

New and Changed Information for Cisco NX-OS Releases

This section includes the following topics:

New and Changed Information for Cisco NX-OS Release 7.0(1)N1(1)

Table 1 summarizes the new and changed features for Cisco NX-OS Release 7.0(1)N1(1) and tells you where they are documented.

 

Table 1 New and Changed Information for Release 7.0(1)N1(1)
Feature
Description
Where Documented

IPv6 ACL Logging

New feature to monitor ACL flows and log dropped packets on an interface.

logging ip access-list cache

New and Changed Information for Cisco NX-OS Release 7.0(3)N1(1)

summarizes the new and changed features for Cisco NX-OS Release 7.0(3)N1(1) and tells you where they are documented.

 

Table 2 New and Changed Information for Release 7.0(3N1(1)
Feature
Description
Where Documented

FEX-based ACL Classification

New feature that uses TCAM resources on a FEX to perform ACL-based packet classification of incoming packets on the switch.

hardware qos-policy-offload