Cisco Nexus 5000 Series NX-OS Virtual Port Channel Command Reference

Bias-Free Language

The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.

Book Contents

Find Matches in This Book

Results

Updated:: January 2, 2012

Chapter: G Commands

graceful consistency-check

G Commands

This chapter describes the Cisco NX-OS virtual port channel (vPC) commands that begin with G.

graceful consistency-check

To enable the Graceful Type-1 Consistency feature in a virtual port channel (vPC) domain, use the graceful consistency-check command. To disable the Graceful Type-1 Consistency feature, use the no form of this command.

graceful consistency-check

no graceful consistency-check

Syntax Description

This command has no arguments or keywords.

Command Default

Enabled

Command Modes

vPC domain configuration mode

Command History

Release	Modification
5.0(2)N2(1)	This command was introduced.

Examples

This example shows how to enable the Graceful Type-1 Consistency feature in vPC domain 100:

switch# configuration terminal

switch(config)# vpc domain 100

switch(config-vpc-domain)# graceful consistency-check

switch(config-vpc-domain)#

Related Commands

Command	Description
vpc domain	Configures a vPC domain.
show vpc brief	Displays information about vPCs. If the vPC feature is not enabled, the system displays an error when you enter this command.

Was this Document Helpful?

Feedback

Contact Cisco

Open a Support Case
(Requires a Cisco Service Contract)