F Commands

This chapter describes the system management commands that begin with F.

feature ptp

To enable the PTP feature, use the feature ptp command. To unconfigure the PTP feature, use the no form of this command.

feature ptp

no feature ptp

 
Syntax Description

There are no arguments or keywords for this command.

 
Command Default

None

 
Command Modes

Global configuration mode

 
Command History

Release
Modification

5.2(1)N1(1)

This command was introduced.

Examples

This example shows how to enable PTP on the device:

switch# configure terminal
switch(config)# feature ptp

 
Related Commands

Command
Description

feature ptp

Enables or disables PTP on the device.

ptp source

Configures the source IP address for all PTP packets.

ptp domain

Configures the domain number to use for this clock.

ptp priority1

Configures the priority 1 value to use when advertising this clock.

ptp priority2

Configures the priority 1 value to use when advertising this clock.

show ptp brief

Displays the PTP status.

show ptp clock

Displays the properties of the local clock.