The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.
This chapter provides release-specific information for each new and changed feature in the Cisco Nexus 5000 Series NX-OS Fibre Channel Command Reference. The latest version of this document is available at the following Cisco website:
http://www.cisco.com/en/US/products/ps9670/prod_command_reference_list.html
To check for additional information about this Cisco NX-OS Release, see the Cisco Nexus 5000 Series Switch Release Notes available at the following Cisco website:
http://www.cisco.com/en/US/products/ps9670/prod_release_notes_list.html
This section includes the following topics:
•New and Changed Information for Cisco NX-OS Release 5.2(1)N1(1)
•New and Changed Information for Cisco NX-OS Release 5.2(1)N1(1)
•New and Changed Information for Cisco NX-OS Release 5.0(3)N2(1)
•New and Changed Information for Cisco NX-OS Release 5.0(3)N1(1)
•New and Changed Information for Cisco NX-OS Release 5.0(2)N2(1)
•New and Changed Information for Cisco NX-OS Release 5.0(2)N1(1)
•New and Changed Information for Cisco NX-OS Release 4.2(1)N1(1)
•New and Changed Information for Cisco NX-OS Release 4.1(3)N1(1)
•New and Changed Information for Cisco NX-OS Release 4.0(0)N1(1a)
•New and Changed Information for Cisco NX-OS Release 4.0
There are no new or changed commands for Cisco NX-OS Release 5.2(1)N1(1).
summarizes the new and changed commands for Cisco NX-OS Release 5.1(3)N1(1) and tells you where they are documented.
|
|
|
---|---|---|
Release 5.1(3)N1(1) |
||
CiscoAdapter Fabric Extender (Adapter-FEX) |
This feature was introduced. The following commands were updated to support Adapter-FEX: •bind •feature-set virtualization •interface vethernet |
|
Boot from SAN on virtual port channel (vPC) |
This feature was introduced. The following commands were added to support this feature: •fcoe •channel mode active •switchport •show interface san-port-channel •show running-config interface san-port-channel The following commands were updated to support this feature: •bind •interface san-port-channel •shutdown |
channel mode active (SAN PortChannel) show interface san-port-channel |
Fabric Binding |
The feature fabric-binding command was added. This command replaced the fabric-binding enable command. |
|
Fibre Channel over Ethernet (FCoE) over Adapter-FEX |
This feature was introduced. |
|
Virtual Ethernet interfaces |
This feature was introduced. |
install feature-set virtualization |
SAN Port Channel |
The following commands were updated: •interface san-port-channel The following keywords, which in earlier releases were part of the interface san-port-channel command, now appear as independent commands: •description •shutdown •switchport |
summarizes the new and changed commands for Cisco NX-OS Release 5.0(3)N2(1) and tells you where they are documented.
|
|
|
---|---|---|
Release 5.0(3)N2(1) |
||
Fibre Channel over Ethernet (FCoE) |
This feature was introduced. |
switchport (virtual Fibre Channel interface) |
There were no new and changed commands for Cisco NX-OS Release 5.0(3)N1(1).
summarizes the new and changed commands for Cisco NX-OS Release 5.0(2)N2(1) and tells you where they are documented.
summarizes the new and changed commands for Cisco NX-OS Release 5.0(2)N1(1) and tells you where they are documented.
|
|
|
---|---|---|
Release 5.0(2)N1(1) |
||
Virtual Fibre Channel interface |
The following commands were updated: •interface vfc •switchport mode trunk The following keywords, which in earlier releases were part of the interface vfc command, now appear as independent commands for configuring virtual Fibre Channel interfaces: •bind •description •shutdown •switchport |
description (virtual Fibre Channel interface) switchport (virtual Fibre Channel interface) |
summarizes the new and changed commands for Cisco NX-OS Release 4.2(1)N1(1) and tells you where they are documented.
summarizes the new and changed commands for Cisco NX-OS Release 4.1(3)N1(1) and tells you where they are documented.
summarizes the new and changed commands for Cisco NX-OS Release 4.0(0)N1(1a) and tells you where they are documented.
|
|
|
---|---|---|
Release 4.0(0)N1(1a) |
||
Support for virtual Fibre Channel (vFC) interface |
This feature was introduced. |
description (virtual Fibre Channel interface) switchport (virtual Fibre Channel interface) |
N Port |
The following features were introduced: •N Port Identifier Virtualization (NPIV) •N Port Virtualization (NPV) |
|
Fabric-Device Management Interface (FDMI) |
This feature was introduced. |
|
Fibre Channel over Ethernet (FCoE) |
This feature was introduced. |
|
Cisco Fabric Services (CFS) |
This feature was introduced. |
|
Fabric Binding |
This feature was introduced. |
|
Port tracking |
This feature was introduced. |
|
Fibre Channel Port Security |
This feature was introduced. |
|
Fibre Channel |
Several commands were added or updated to support Fibre Channel configurations. |
|
WWN |
This feature was introduced. |
|
SAN Port Channel |
This feature was introduced. |
|
Fibre Channel Security Protocol (FC-SP) |
This feature was introduced. |
|
Fabric Shortest Path First (FSPF) |
This feature was introduced. |
|
Registered Link Incident Report (RLIR) |
This feature was introduced. |
|
Registered State Change Notification (RSCN) |
This feature was introduced. |
|
Zoning |
This feature was introduced. |
member (zone configuration mode) member (zoneset configuration mode) system default zone default-zone permit system default zone distribute full zone name (configuration mode) zone name (zone set configuration mode) |
summarizes the new and changed commands for Cisco NX-OS Release 4.0 and tells you where they are documented.
|
|
|
---|---|---|
Release 4.0 |
||
Fibre Channel |
This feature was introduced. |