New and Changed Information

This chapter provides release-specific information for each new and changed feature in the Cisco Nexus 3548 Switch NX-OS Multicast Routing Configuration Guide, Release 5.0(3)A1(2). The latest version of this document is available at the following Cisco website:

http://www.cisco.com/en/US/products/ps9670/products_installation_and_configuration_guides_list.html

To check for additional information about this Cisco NX-OS Release, see the Cisco Nexus 3548 Series Switch NX-OS Release Notes , available at the following Cisco website:

http://www.cisco.com/en/US/products/ps9670/prod_release_notes_list.html

Table 1 summarizes the new and changed features for the Cisco Nexus 3548 Series NX-OS Multicast Routing Configuration Guide, and tells you where they are documented.

 

Table 1 New and Changed Features

Feature
Description
Changed in Release
Where Documented

Threshold-infinity and prebuild SPT configuration

Support added for configuring PIM without a source state and for prebuilding SPT by triggering PIM.

5.0(3)A1(2)

Configuring PIM