Index
description 2-4
state creation 4-3
static groups 3-6
static groups on the OIF 3-6
description 2-3
IGMPv3 snooping 5-3
state creation 4-3
static groups 3-6
static groups on the OIF 3-6
configuring an Anycast-RP set 4-21
description 4-6
MSDP (Note) 6-2
Any Source Multicast. See ASM mode
configuring 4-15
configuring shared trees only 4-23
description 4-2
join-prune messages 4-3
MSDP 6-2
candidate RP configuration steps 4-19
candidate RPs, configuring 4-19
configuring 4-18
description 4-5
mapping agent configuration steps 4-19
configuring 4-19
configuring route maps 4-26
RP-Announce messages 4-5
RP-Discovery messages 4-5
MSDP 6-2
MSDP 6-2
candidate BSR configuration steps 4-17
configuring 4-16
description 4-4
candidate RP configuration steps 4-17
description 4-4
candidate RPs, configuring 4-17
configuring 4-16
description 4-4
description 4-4
enabling listen and forward 4-5
route maps, configuring 4-26
RP configuration steps 4-17
related documents 1-3
description 4-7
PIM domains 2-6
priority and PIM hello message 4-2
SSM mode 4-24
all-hosts multicast group 3-2
configuration, example 3-14
description 3-1
enabling 3-1
changes from IGMPv2 3-2
description 3-3
SSM 3-3
licensing requirements 3-4
configuring 3-5
default settings 3-5
PIM domains 2-6
description 3-3
designated 3-2
TTL 3-3
version, default (IGMPv2) 3-2
versions, description 3-2
iip igmp enforce-router-alert 3-13
ip igmp access-group 3-10
ip igmp flush-routes 3-13
ip igmp group-timeout 3-10
ip igmp immediate-leave 3-11
ip igmp join-group 3-9
ip igmp last-member-query-count 3-10
ip igmp last-member-query-response-time 3-10
ip igmp querier-timeout 3-9
ip igmp query-interval 3-10
ip igmp query-max-response-time 3-10
ip igmp query-timeout 3-10
ip igmp report-link-local-groups 3-10
ip igmp report-policy 3-10
ip igmp robustness-variable 3-9
ip igmp ssm-translate 3-12
ip igmp startup-query-count 3-9
ip igmp startup-query-interval 3-9
ip igmp static-oif 3-9
ip igmp version 3-8
access groups 3-7
example 3-14
group membership timeout 3-2, 3-7
immediate leave 3-7
last member query count 3-7
last member query response interval 3-7
member query response interval 3-4
number of query messages 3-3
parameters 3-5
parameters, default settings 3-5
querier timeout 3-6
query interval 3-7
query maximum response time 3-3
query max response time 3-6
report link local multicast groups 3-7
report policy 3-7
reports for link local addresses 3-4
robustness value 3-4, 3-6
startup query count 3-6
startup query interval 3-6
static multicast groups 3-6
Static multicast groups on OIF 3-6
version 3-6
IGMPv3 suppression 3-3
initiating receipt of multicast data 3-2
SSM translation 3-11
suppressing 3-3
description 3-3
designated 3-2
TTL 3-3
show ip igmp groups 3-13
show ip igmp interface 3-13
show ip igmp local-groups 3-13
show ip igmp route 3-13
show running-configuration igmp 3-14
show startup-configuration igmp 3-14
configuration, example 5-8
description 5-1
licensing requirements 5-4
membership report suppression 5-2
parameters, configuring 5-5
parameters, default settings 5-4
prerequisites 5-4
proprietary features 5-2
querier, description 5-3
statistics 5-8
switch example 5-1
vPC statistics 5-8
ip igmp snooping 5-6
ip igmp snooping explicit-tracking 5-6
ip igmp snooping fast-leave 5-6
ip igmp snooping last-member-query-interval 5-6
ip igmp snooping link-local-groups-suppression 5-7
ip igmp snooping mrouter interface 5-7
ip igmp snooping querier 5-7
ip igmp snooping report-suppression 5-7
ip igmp snooping static-group 5-7
ip igmp snooping v3-report-suppression 5-7
enabling 5-5
example 5-8
explicit tracking 5-5
fast leave 5-5
IGMPv3 report suppression 5-5
last member query interval 5-5
Link-local groups suppression 5-5
multicast routers 5-5
configuring 5-5
default settings 5-4
report suppression 5-5
snooping querier 5-5
static groups 5-5
show ip igmp snooping 5-7
show ip igmp snooping explicit-tracking 5-8
show ip igmp snooping groups 5-7
show ip igmp snooping mroute 5-8
show ip igmp snooping querier 5-8
changes from IGMPv2 3-2
description 3-3
SSM 3-3
interdomain multicast protocols
MSDP 2-8
SSM 2-8
Internet Group Management Protocol. See IGMP
licensing requirements, multicast 2-9
description 2-9
flushing routes 4-30
description 2-8
flushing routes 4-30
Anycast-RP (Note) 6-2
configuration, example 6-16
description 6-1
full mesh, description 6-2
interdomain multicast protocol 2-8
licensing requirements 6-3
mesh groups, description 6-3
parameters, default settings 6-4
peering, steps to configure 6-4
peer-RPF flooding, description 6-3
peers, description 6-1
PIM domains 2-6, 6-1
prerequisites 6-4
SA cache, description 6-3
SA messages, and PIM register messages 6-3
SA messages, description 6-1, 6-2
clearing 6-15
displaying 6-15
feature msdp 6-6
ip msdp description 6-9
ip msdp flush-routes 6-14
ip msdp group-limit 6-11
ip msdp mesh-group 6-13
ip msdp originator-id 6-11
ip msdp password 6-9
ip msdp peer 6-7
ip msdp sa-interval 6-11
ip msdp sa-limit 6-9
ip msdp sa-policy 6-9
ip msdp shutdown 6-9
administrative shutdown 6-8
commands, cached (Note) 6-5
description field 6-8
enabling 6-5
example 6-16
group limit 6-10
MD5 password 6-8
mesh groups 6-12
originator interface name 6-10
peering, steps to configure 6-4
peers and peering relationship 6-6
restarting the MSDP process 6-13
interval 6-10
limit 6-8
policy IN 6-8
policy OUT 6-8
show ip msdp 6-15
show ip msdp count 6-14
show ip msdp mesh-group 6-14
show ip msdp peer 6-14
show ip msdp policy statistics sa-policy 6-15
show ip msdp route 6-15
show ip msdp rpf 6-14
show ip msdp sa-cache 6-15
show ip msdp sources 6-14
show ip msdp summary 6-14
clear ip msdp peer 6-15
clear ip msdp policy statistics sa-policy 6-15
clear ip msdp route 6-15
clear ip msdp sa-cache 6-15
clear ip msdp statistics 6-15
administratively scoped IP, description 4-8
channel 2-1
description 2-1
ASM 4-2
SSM 4-2
forwarding 2-4
group 2-1
MSDP 2-8
SSM 2-8
IPv4 addresses 2-1
licensing requirements 2-9
IGMP 3-1
IGMP snooping 5-1
MSDP 6-1
PIM 2-5
MSDP 6-13
description 2-2
PIM 2-5
shared 2-3, 4-1
source 2-2, 4-1
SPTs, description 2-2
Multicast Forwarding Information Base. See MFIB
Multicast Routing Information Base. See MRIB
Multicast Source Discovery Protocol. See MSDP
RPF check 2-4
configuration steps 4-10
configuring, description 4-9
dense mode 2-5
description 2-5, 4-1
enabling 4-2
failure detection 4-3
guidelines and limitations 4-8
licensing requirements 4-8
message filtering 4-27
parameters, default settings 4-9
refreshing state 4-3
sparse mode 2-5, 4-1
clearing 4-32
displaying 4-32
feature pim 4-11
ip mroute 4-25
ip pim anycast-rp 4-22
ip pim auto-rp listen 4-13
ip pim auto-rp mapping-agent 4-20
ip pim auto-rp mapping-agent-policy 4-30
ip pim auto-rp rp-candidate 4-20
ip pim auto-rp rp-candidate-policy 4-29
ip pim border 4-14
ip pim bsr bsr-policy 4-29
ip pim bsr-candidate 4-18
ip pim bsr listen 4-13
ip pim bsr rp-candidate-policy 4-29
ip pim dr-priority 4-14
ip pim flush-routes 4-31
ip pim hello-authentication ah-md5 4-14
ip pim hello-interval 4-14
ip pim jp-policy 4-30
ip pim log-neighbor-changes 4-29
ip pim neighbor-policy 4-15
ip pim register-policy 4-29
ip pim register-rate-limit 4-14
ip pim rp-address 4-16
ip pim rp-candidate 4-18
ip pim send-rp-announce 4-20
ip pim send-rp-discovery 4-20
ip pim sparse-mode 4-14
ip pim ssm range 4-24
ip pim use-shared-tree-only 4-23
ip routing multicast holddown 4-14
Auto-RP candidate RP policy (PIM only) 4-28
Auto-RP mapping agent policy (PIM only) 4-28
Auto-RP message action (PIM only) 4-11
BSR candidate RP policy 4-28
BSR message action 4-11
BSR policy 4-28
description 4-9
designated router priority 4-12
domain border 4-12
ASM mode using BSR 4-34
ASM mode using PIM Anycast-RP 4-34
SSM mode 4-33
feature, enabling 4-10
flushing routes 4-30
hello authentication mode 4-12
hello interval 4-12
Initial holddown period 4-12
join-prune policy 4-28
logging neighbor changes 4-27
neighbor policy 4-12
parameters, default settings 4-9
PIM register policy 4-27
Register rate limit 4-11
sparse mode, enabling 4-12
sparse mode parameters 4-11
steps to configure 4-10
border parameter 4-8
PIM 2-6
MSDP (PIM) 6-1
Anycast-RP 4-6
authenticating hello with MD5 hash value 4-3
DR priority 4-2
filtering join-prune 4-3
hello, description 4-2
join and state creation 4-3, 4-4
join-prune, description 4-3
join-prune and join or prune (Note) 4-3
MSDP SA messages 6-3
description 4-7
filtering 4-7
MSDP 6-1
show ip mroute 4-31
show ip pim group-range 4-31
show ip pim interface 4-31
show ip pim neighbor 4-31
show ip pim oif-list 4-31
show ip pim policy statistics 4-32
show ip pim route 4-31
show ip pim rp 4-31
show ip pim rp-hash 4-31
show ip pim vrf 4-32
show running-configuration pim 4-32
show startup-configuration pim 4-32
clear ip pim interface statistics 4-32
clear ip pim policy statistics 4-32
clear ip pim statistics 4-32
Protocol Independent Multicast. See PIM 2-5
restarting multicast processes
MSDP 6-13
reverse path forwarding. See RPF
Auto-RP mapping agent configuration 4-26
BSR configuration 4-26
RP configuraion 4-26
RP-Announce messages, and Auto-RP 4-5
RP-Discovery messages, and Auto-RP 4-5
check 2-4
configuring routes 4-25
PIM 2-5
static multicast 2-7
address selection 4-4
Anycast-RP, description 4-6
Auto-RP, description 4-5
BSRs, description 4-4
default mode (ASM) 2-7
description 4-4
MSDP 6-1
PIM domains 2-6
route maps, configuring 4-26
selection process 4-5
static, description 4-4
static addresses, configuring 4-15
RP trees. See multicast distribution trees, shared
RPTs. See multicast distribution trees, shared
description 2-2
SSM mode 4-3
SSM mapping. See SSM translation
configuring 4-24
description 2-7, 4-2
DRs 4-24
group range, configuring 4-24
IGMPv3 3-3
interdomain multicast protocol 2-8
join-prune messages 4-3
description 3-11
IGMPv1 and IGMPv2 3-3
troubleshooting 5-1
Cisco Nexus 3548 Switch NX-OS Multicast Routing Configuration Guide, Release 5.0(3)A1(2)
Bias-Free Language
The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.
- Updated:
- June 23, 2014
Feedback