- New and Changed Information
- Preface
- Overview
- Part 1: IP
- Configuring IPv4
- Configuring IPv6
- Part 2: Routing
- Configuring OSPF
- Configuring OSPFv3
- Configuring EIGRP
- Configuring Basic BGP
- Configuring Advanced BGP
- Configuring Bidirectional Forwarding Detection
- Configuring ECMP for Host Routes
- Configuring RIP
- Configuring Static Routing
- Configuring Layer 3 Virtualization
- Configuring the Unicast RIB and FIB
- Configuring Route Policy Manager
- Part 3: First-Hop Redundancy Protocols
- Configuring HSRP
- Configuring VRRP
- Configuring Object Tracking
- IETF RFCs
- Glossary
- Index
New and Changed Information
This chapter provides release-specific information for each new and changed feature in the Cisco Nexus 3000 Series NX-OS Unicast Routing Configuration Guide, Release 5.0(3)U5(1d). The latest version of this document is available at the following Cisco website:
http://www.cisco.com/en/US/products/ps11541/products_installation_and_configuration_guides_list.html
To check for additional information, see the Cisco Nexus 7000 Series NX-OS Release Notes, Release 5.x available at the following Cisco website:
http://www.cisco.com/en/US/products/ps11541/prod_release_notes_list.html
summarizes the new and changed features for the Cisco Nexus 3000 Series NX-OS Unicast Routing Configuration Guide, Release 5.0(3)U5(1d), and tells you where they are documented.
|
|
|
|
|
|---|---|---|---|
IPv4 |
Added information to configure the glean throttling feature. |
5.0(3)U2(1) |
|
Equal-cost multipathing (ECMP) protocol for host routes |
Added information on how to configure ECMP for host routes. |
5.0(3)U2(2) |
|
BGP |
Added support for Local AS. |
5.0(3)U2(2a) |
|
BFD for BGP |
Added guidelines and limitations for LACP configuration, and for BFD echo and URFP. |
5.0(3)U2(2a) |
|
IPv6 |
Added information to configure IPv6. |
5.0(3)U3(1) |
Chapter 3 "Configuring IPv6" |
Route Reflector |
Added the route-reflector-client command. |
5.0(3)U3(1) |
|
Next Hop Address |
Added the next-hop-self command. |
5.0(3)U3(1) |
|
Bidirectional forwarding detection (BFD) for OSPFv2 |
Added information on how to configure BFD for OSPFv2. |
5.0(3)U3(1) |
|
Allowas-in |
Added information on how to configure the autonomous system path containing your own AS. |
5.0(3)U3(1) |
|
Bidirectional forwarding detection (BFD) |
Combined BFD into one chapter. |
5.0(3)U4(1) |
|
Bidirectional forwarding detection (BFD) for static routes |
Added information on how to configure BFD for static routes. |
5.0(3)U4(1) |
|
ECMP Routing Hash |
Added information on how to configure ECMP routing hash. |
5.0(3)U5(1) |
|
AS peer reflection |
Added support for autonomous system peer reflection. |
5.0(3)U5(1) |
|
ECMP for Host Routes |
Added the ability to enable or disable ECMP separately for IPv4 host routes or IPv6 host routes. |
5.0(3)U5(1d) |
Feedback