The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.
A
assignment, loopback address 1-3
associating fabric extender 2-1
B
BPDU Guard 1-4
C
CDP 3-1
changing max-links 2-5
chassis 1-8
Cisco Discovery Protocol, see CDP.
class of service, see CoS.
configuration data 1-3
CoS 3-2
D
digital optical monitoring, see DOM.
disassociating fabric interface 2-4
documentation
additional publications 1-iv
obtaining 1-v
DOM 3-3
drop queue 3-2
E
edge port (PortFast) 3-1
EtherChannel
host interface 3-1
EtherChannel fabric interface 1-2
Ethernet interface 1-8
F
fabric extender 1-1
associating 2-1
beacon LED 2-4
changing max-links 2-5
chassis 1-8
chassis configuration mode 2-4
description 2-4
EtherChannel 1-6
Ethernet interface 1-8
fabric interface 1-2
EtherChannel 1-2
host interface 1-2
EtherChannel 3-1
image management 1-7
local switching 1-4
pinning max-links 2-4
port numbering 1-7
redistributing links 2-6
serial number 2-4
software installation 1-2
software upgrade 1-2
static pinning 1-5
fabric interface 1-2
associating EtherChannel 2-3
associating Ethernet interface 2-2
disassociating 2-4
EtherChannel 1-2
Ethernet 1-2
fail-over load balancing 1-7
H
host interface 1-2
autonegotiation 3-2
edge port 3-1
EtherChannel 3-1
flow control defaults 3-2
IGMP snooping 3-1
link-level flow control 3-2
packet counter 3-1
I
IEEE 802.1p 3-2
IEEE 802.3x 3-2
IGMP snooping 3-1
image management 1-7
ingress ACL 3-2
J
jumbo frame 3-2
L
local switching 1-4
loopback address assignment 1-3
M
manual redistribution 1-6
maximum transmission unit, see MTU.
max-links
default 1-5
disruption 1-6
MTU 3-2
multicast replication 1-4
N
no-drop queue 3-2
O
1-Gigabit BaseT Ethernet interface 1-8
oversubscription
Cisco Nexus 2148T 1-3
ratio 1-3
P
packet counter 3-1
per class flow control 3-2
PFC 3-3
pinning
max-links 1-5
port channel 1-6
port numbering 1-7
priority flow control, see PFC.
Q
QoS 3-2
broadcast class 3-2
drop queue 3-2
egress policies 3-2
multicast class 3-2
no-drop queue 3-2
Quality of Service, see QoS.
R
redistributing links 2-6
related documents 1-iv
S
service requests 1-v
SFP+ 1-8
interface adapter 1-8
validation 3-3
show commands
displaying associated EtherChannel 2-3
displaying associated Ethernet interface 2-2
displaying diagnostics 2-11
displaying environment 2-11
displaying Fabric Extender units 2-7
displaying fabric interface 2-5
displaying inventory 2-10
displaying modules 2-10
displaying SPROM 2-12
displaying transceiver status 2-9
single management domain 1-2
small form-factor pluggable transceiver, see SFP+.
SPAN source 3-2
static pinning 1-5
switchport
fex-fabric mode 3-3
saved configuration 3-3
T
10-Gigabit Ethernet interface 1-8
V
version compatibility 1-7