Cisco 4x InfiniBand HCA Expansion Card for IBM BladeCenter User Guide
Specifications and Compliance

Table Of Contents

Specifications and Compliance

Electrical Specifications

Physical and Environmental Specifications

Safety

Electromagnetic Compatibility


Specifications and Compliance


This chapter describes the HCA Expansion Card specifications and compliance certifications.

Electrical Specifications

Table 3-1 lists LVTTL signal levels.

Table 3-1 LVTTL Signal Levels

Parameter
Test Condition
Min
Nom
Max
Units

VOH

2.4

 

3.3

Volts

VOL

0.0

 

0.4

Volts

VIH

 

2.0

 

5.5

Volts

VIL

 

-0.5

 

0.8

Volts

IIH

     

4.0

mAmps

IIL

     

2.5

mAmps


Table 3-2 lists I2C signal levels.

Table 3-2 12C Signal Levels

Parameter
Test Condition
Min
Nom
Max
Units

VOH

2.4

 

3.3

Volts

VOL

0.0

 

0.4

Volts

VIH

 

2.0

 

5.5

Volts

VIL

 

-0.5

 

0.8

Volts

IIH

     

4.0

mAmps

IIL

     

2.5

mAmps


Table 3-3 lists InfiniBand signal levels.

Table 3-3 InfiniBand Signal Levels

Parameter
Test Condition
Min
Nom
Max
Units

TX diff. Peak to Peak

Vdd = 2.5V

0.9

 

1.6

Volts

RX diff. Input Peak to Peak

Vdd = 2.5V

0.2

 

2.2

Volts


Physical and Environmental Specifications

Table 3-4 lists temperature and cooling conditions.

Table 3-4 Temperature and Cooling

Condition
Range

Operating temperature

5 to 67 degrees Celsius, local ambient temperature

System Non-operating

-40 to 90 degrees Celsius

Operating altitude

0 to 10,000 ft

Non-operating altitude

0 to 50,000 ft


Table 3-5 lists temperature and cooling conditions.

Table 3-5 Humidity

Condition
Range

Operating Humidity

8% to 80% non-condensing

Operating Gradient

Maximum per 60 min: 10%

Non-Operating Humidity

5% to 80%, non-condensing


Safety

The HCA Expansion Card meets the following safety agency standards:

USA: UL 60950.

Canada: CAN60950

Europe: IEC60950, EN60950, EN60825-1 and EN60825-2

Electromagnetic Compatibility

The HCA Expansion Card meets the following EMC "Class A" standards, when installed in and operated within a closed chassis:

USA: CFR 47 Part 15, Subpart B

Canada: ICES-003 Issue 2

Europe: EN 61000-3-2 (Harmonics), EN 61000-3-3 (Flicker), EN 55022 1998, EN 55024 1994

Japan: VCCI-V3/97.04