Table Of Contents
Specifications and Cables
System Specifications
Port Connector Pinouts
Cabling Specifications
Ethernet Cable Specifications
Maximum Cable Distance
Specifications and Cables
This appendix provides system, port, and cabling specifications for the router.
System Specifications
Table 0-1 outlines the system specifications for the router.
Table 0-1 System Specifications
Description
|
Design Specification
|
Physical Dimensions
|
|
Dimensions (H x W x D)
|
2.0 x 9.7 x 8.5 in. (5.1 x 24.6 x 21.6 cm)
|
Weight (does not include desktop power supply)
|
Cisco 806 router: 1.5 lb (0.68 kg)
|
Environmental Operating Ranges
|
|
Nonoperating temperature
|
-4 to 149°F (-20 to 65°C)
|
Nonoperating humidity
|
5 to 95% relative humidity
|
Nonoperating altitude
|
0 to 15,000 ft (4570 m)
|
Operating temperature
|
32 to 104°F (0 to 40°C)
|
Operating humidity
|
10 to 85% relative humidity
|
Operating altitude
|
0 to 10,000 ft (3000 m)
|
| |
|
| |
|
Router Power
|
|
AC input voltage
|
100 to 240 VAC
|
Frequency
|
50 to 60 Hz
|
Power consumption
|
15W
|
Voltage
|
5V
|
For information on regulatory compliance, refer to the Regulatory Compliance and Safety Information for Cisco 806 Router and SOHO 71 Router document that was shipped with your router.
Warning 
Ultimate disposal of this product should be handled according to all national laws and regulations.
Port Connector Pinouts
This section provides pinouts for the following connectors:
•Ethernet—See Table 0-2, Table 0-5, and Table 0-6.
•Console (for connecting a terminal or PC)—See Table 0-3.
•Power—See Table 0-4.
Table 0-2 Cisco 806 Router Ethernet Connector Pinouts (RJ-45)
Pin
|
Function
(TO HUB/TO PC Button -
IN Position)
|
Function
(TO HUB/TO PC Button -
OUT Position)
|
1
|
TX+
|
RX+
|
2
|
TX-
|
RX-
|
3
|
RX+
|
TX+
|
4
|
Unused
|
Unused
|
5
|
Unused
|
Unused
|
6
|
RX-
|
TX-
|
7
|
Unused
|
Unused
|
8
|
Unused
|
Unused
|
Table 0-3 Console Connector Pinouts (RJ-45)
Pin
|
Function
|
1
|
RTS
|
2
|
DTR
|
3
|
TXD
|
4
|
GND
|
5
|
GND
|
6
|
RXD
|
7
|
DSR
|
8
|
CTS
|
The Console port is configured as a data communications equipment (DCE) device. The default parameters for the console port are as follows:
•9600 baud
•8 data bits
•No parity
•One stop bit
Table 0-4 Power Connector Pinouts
Pin
|
Function
|
1
|
ROF
|
2
|
RTN
|
3
|
N.C.
|
4
|
N.C.
|
5
|
+5
|
6
|
RTN
|
7
|
N.C.
|
8
|
N.C.
|
Cabling Specifications
This section provides specifications for the following Ethernet cables, which you might need to provide:
•Straight-through
•Crossover
It also provides information on Ethernet cable distance limitations.
Ethernet Cable Specifications
Table 0-5 provides the specifications for straight-through and crossover Ethernet cables.
Table 0-5 Ethernet Cable Specifications
Type
|
Category
|
Shielding
|
10BASE-T
|
Category 3 or 5
|
Unshielded twisted-pair (UTP)
|
Maximum Cable Distance
Table 0-6 provides the maximum distance of Ethernet cables that you can use between Ethernet devices.
Table 0-6 Maximum Cable Distance
Cable
|
Maximum Distance
|
Ethernet cables
|
328 ft (100 m)
|
