Table Of Contents

CLI Commands for the FlexWAN and Enhanced FlexWAN Modules

CLI Commands for the FlexWAN and Enhanced FlexWAN Modules

---

Table 3-1 lists the CLI commands for displaying FlexWAN or Enhanced FlexWAN module status, configuration, and statistical information, as well as the commands for debugging purposes. Enter these commands from the Multilayer Switch Feature Card (MSFC) console.

---

Note For more information on these commands, see: http://www.cisco.com/en/US/docs/ios/mcl/122sxmcl/12_2sx_mcl_book.html

---

Table 3-1 CLI Commands for the FlexWAN and Enhanced FlexWAN Modules

Command	Options	Description
Router# show cwan	stats vlans	Displays WAN port statistics. Displays hidden VLAN-to-WAN interface mapping.
Router# dir cwan	cwan[mod_num]/bay-bootflash: cwan[mod_num]/bay-disk0	Displays the FlexWAN module bootflash devices. Displays the Enhanced FlexWAN module bootflash devices.
Router# show fabric	switching-mode utilization	Displays the module switching mode. Displays the percentage of utilization for each fabric channel.
Router# show diagnostic	bootup level content events schedule	Displays the coverage level for the boot-up diagnostics. Displays test information for each test and for all modules. Displays the event log for the diagnostic events. Displays the current scheduled diagnostic tasks.