Downloads |
Table Of Contents
Numerics - A - B - C - D - E - F - G - H - I - K - L - M - N - O - P - Q - R - S - T - U - V - W - Y -
Index
Numerics
1-Port Channelized OC-12/STM-4 line card
default values 6-4
software support 6-2
syntax 6-8
1-Port Gigabit Ethernet Half-Height line card
commands 10-3
default values 10-2
MAC address 10-4
software support 10-1
syntax 10-2
1-Port Gigabit Ethernet line card
commands 11-3
default values 11-2
MAC address 11-4
software support 11-1
syntax 11-2
1-Port OC-12 ATM line card
applying VC class 3-6
creating subinterfaces 3-4
default configuration values 3-2
enabling ILMI PVC discovery 3-6
software support 3-1
syntax 3-4
1-Port OC-12 Packet over SONET line card
command syntax 13-3
default values 13-2
software support 13-1
1-Port OC-48/STM-16 Packet over SONET line card
command syntax 14-3
configuring 14-3
default values 14-2
SDCC default values 14-2
software support 14-1
24-Port Channelized E1/T1 line card
default value 5-2
E1 default values 5-2
E1 syntax 5-3
software support 5-1
T1 default values 5-4
T1 syntax 5-5
4-Port Channelized OC-3/STM-1 line card
default values 7-4
software support 7-2
syntax 7-8
4-Port Channelized T3 Half-Height line card
cable length 4-14
controller 4-4
controller configuration mode 4-13
default value 4-3
enable scrambling 4-8
features 4-2
HDLC packets 4-15
idle pattern 4-15
interface syntax 4-4
line clock source 4-16
loopback mode 4-16
redundancy 4-24
subrate DS3 4-7
unchannelized configuration 4-7
4-Port OC-3/STM-1 ATM line card
default configuration values 1-2
syntax 1-3
6-Port Channelized T3 line card
configurable interface bandwidth 8-9
default value 8-2
interface number syntax 8-3
software support 8-1
6-Port OC-3/STM-1 Packet over SONET line card
command syntax 12-3
configuring 12-3
default values 12-2
software support 12-1
8-Port E3/DS3 ATM line card
default configuration values 2-2
software support 2-1
syntax 2-3
8-port E3/T3 line card
default values 15-2
8-Port Fast Ethernet Half-Height line card
default values 9-2
software support 9-1
8-Port Unchannelized E3/T3 line card
default values 15-2
software support 15-1
syntax 15-3
A
AIS
blue alarm 15-8
Alarm Indication Signal (AIS) 15-8
alarm reporting, atm 3-12
alarm threshold
atm 3-13
ANSI T1.403 specification 4-20, 6-30, 7-30, 8-17
atm alarm reporting command 3-12
atm alarm threshold command 3-13
atm clock internal command 3-2, 3-12
atm encapsulation command 3-18
atm flag command 3-12
atm ilmi-enable command 3-11
atm ilmi-keepalive command 3-12
atm ilmi-pvc discovery command 3-11
atm pvp command 3-9
AU-3 controller
AU-4-TUG-3/TUG-2
AU-4-TUG-3 controller
aug controller command 6-6, 7-6
auto negotiation command 9-2, 10-2, 11-2
B
bandwidth
available e1 5-7
bandwidth command 12-2, 13-2, 14-2, 14-3
Bellcore keyword 4-22, 6-32, 7-32, 8-18
BER test 15-9
BER tests
terminating 4-9, 5-19, 6-31, 7-31, 8-8
BGP routing sessions
configuring 18-9
BGP table 18-4
bit error rate
blue alarm 15-8
broadcast command 3-16
C
cable length command 4-3, 4-10, 4-14, 8-2, 8-10, 15-2
cablelength command 15-6
card 5-2
C-bit framing type 4-8, 5-25, 6-7, 6-19, 6-23, 7-7, 7-19, 7-23, 8-7
CE
channel group number syntax 5-4, 5-5
channel groups
creating 4-17, 5-21, 5-22, 8-14
removing from channelized T3 4-13, 8-10
channelized command 4-3, 4-7, 4-13, 6-5, 6-18, 6-22, 7-5, 7-18, 7-22, 8-2, 8-6, 8-10
channelized OC-12 line card
default configuration values 6-4, 6-6, 7-4, 7-5, 7-6
Frame Relay encapsulation 4-6, 5-7, 5-9, 5-11, 8-5
channelized STM-1 line card
channelization examples 6-3, 7-3
channelized T3 line card
cable length 8-10
configurable interface bandwidth 4-13
controller 8-3
controller configuration mode 4-7, 8-6, 8-9
enable scrambling 8-7
HDLC packets 8-12
idle pattern 8-12
line clock source 8-13, 13-4, 14-7
loopback mode 8-13
maintenance data link messages 4-14, 8-11
responding to remote T3 loopback commands 4-17, 8-14
subrate DS3 8-6
supporting subscriber traffic 4-17, 5-21, 6-26, 7-26, 8-14
unchannelized configuration 8-6
channel limitations 6-27, 7-27
Cisco 10000 Series edge services router (ESR)
configuration examples 18-1
class-int command 3-9
class-vc command 3-17
clear channel configuration 4-7, 8-6
CLI
IOS configuration 18-1
clock command 3-12
clock source command 4-3, 4-11, 4-16, 6-5, 6-6, 6-7, 6-24, 7-5, 7-6, 7-7, 7-24, 8-2, 8-13, 12-2, 12-4, 13-2, 13-4, 14-2, 14-7, 15-2, 15-7
command
E1 line card 5-4
commands
bandwidth 12-2, 13-2, 14-2, 14-3
cable length 2-14, 4-3, 4-10, 4-14, 8-2, 8-10, 15-2, 15-6
cablelength 15-6
channelized 4-3, 4-13, 8-2, 8-6, 8-10
clock source 4-3, 6-5, 6-6, 6-7, 7-5, 7-6, 7-7, 8-2, 12-2, 13-2, 14-2, 15-2, 15-7
description 15-2, 15-3, 15-7, 15-10
dsu bandwidth 4-3, 4-7, 6-7, 6-19, 7-7, 7-18, 8-2, 8-6, 15-2, 15-3, 15-11, 17-2, 17-7, 17-8, 17-10, 17-26, 17-29
dsu mode 4-3, 8-2, 15-2, 15-3, 15-10
encapsulation 4-3, 6-7, 7-7, 8-2, 12-2, 13-2, 14-2, 15-2, 15-3, 15-11
equipment 15-2
equipment customer loopback 15-12
equipment loopback 15-12
equipment network loopback 15-12
framing 4-3, 6-5, 6-7, 7-5, 7-7, 8-2, 8-3, 12-2, 13-2, 14-2, 15-2, 15-13
idle character 4-3, 4-8, 6-7, 6-20, 7-7, 7-19, 8-3, 8-8, 15-2, 15-3
idle-character 15-13
idle pattern 4-3, 6-5, 7-5, 8-2
keepalive 4-3, 6-7, 7-7, 8-3, 12-2, 13-2, 14-2, 14-3
loopback 4-12, 4-16, 6-5, 6-6, 7-5, 7-6, 8-13, 10-4, 11-5, 12-2, 15-3, 15-14
mdl 15-3
mtu 4-3, 6-7, 7-7, 8-3, 12-2, 13-2, 14-2, 14-3
national bit 15-16
privileged EXEC mode hw-module 16-5
scramble 4-3, 4-8, 8-3, 8-7, 12-2, 13-2, 14-2, 15-3, 15-16
show
version 1-2, 2-1, 3-2, 4-2, 5-2, 6-2, 7-2, 8-2, 9-2, 10-2, 11-2, 12-2, 13-2, 14-2, 15-2
show interface slot/subslot/port 9-5, 10-3, 11-3
T1 clock source 4-3, 5-3, 5-5, 6-6, 7-6, 8-2
committed access rate (CAR) 18-5
community list 18-6
configuration
controller mode 5-6, 5-10, 5-16
values 1-2, 2-2, 3-2, 6-4, 6-6, 7-4, 7-5, 7-6, 15-2
configure
configuring an E3 interface 15-5
configuring a T3 interface 15-5
connections
controller
e1 5-2
parameters 5-18
t1 5-4
controller configuration mode 8-9
controller sonet command 14-4
crc command 4-3, 6-7, 7-7, 8-2, 12-2, 13-2, 14-2, 14-3
cyclical redundancy check command
D
default
1-Port Gigabit Ethernet Half-Height line card values 10-2
1-Port Gigabit Ethernet line card values 11-2
1-Port OC-12 Packet over SONET line card values 13-2
1-Port OC-48/STM-16 Packet over SONET line card SDCC values 14-2
1-Port OC-48/STM-16 Packet over SONET line card values 14-2
24-Port Channelized E1/T1 line card values 5-2, 5-4
4-Port Channelized T3 Half-Height line card 4-3
6-Port Channelized T3 line card values 8-2
6-Port OC-3/STM-1 Packet over SONET line card values 12-2
8-Port Fast Ethernet Half-Height line card values 9-2
channelized OC-12 line card values 6-4, 6-6, 7-4, 7-5, 7-6
gigabit Ethernet (GE) line card values 9-2, 10-2, 11-2
OC-12 ATM line card values 3-2
description command 15-2, 15-3, 15-7, 15-10
DS0
components, configuring 6-21, 7-21
DS3
interface configuration 15-4
dsu bandwidth command 4-3, 4-5, 4-7, 6-7, 6-9, 6-19, 7-7, 7-9, 7-18, 8-2, 8-4, 8-6, 15-2, 15-3, 15-11
dsu mode command 4-3, 4-7, 6-7, 6-19, 7-7, 7-18, 7-19, 8-2, 8-7, 15-2, 15-3, 15-10
dsx3 designation 15-4
dsx3 interface 15-4
E
E1 5-9
available bandwidth 5-7
controller and interface syntax 5-4
line card port 5-10
e1
controller configuration mode 5-9, 5-11
full framed bandwidth 5-8, 5-10
full-rate bandwidth 5-10
global configuration mode 5-14
interface 5-2
interface configuration mode 5-9, 5-11
unchannelized full bandwidth 5-6
E3
configuring an interface 15-5
interface configuration 15-4
E3/T3
BER test 15-9
cable length buildout 15-7
configuration examples 15-5
configuration overview 15-4
controller configuration commands 15-6
dsu bandwidth 15-11
dsu mode 15-10
dsx3mode command 15-8
interface configuration commands 15-8
subrate interface 15-11
E3/T3 port mode
encapsulation command 3-18, 4-3, 6-7, 7-7, 8-2, 12-2, 13-2, 14-2, 15-2, 15-3, 15-11, 18-2
equipment command 15-2
equipment customer loopback command 15-12
equipment identification code 6-23, 7-23
equipment loopback command 4-12, 4-17, 15-12
equipment network loopback command 15-12
extended super frame (ESF) format 4-19, 6-29, 7-29, 8-16
F
facility data link (FDL) 4-20, 8-17
facility identification code 6-23, 7-23
fallback-clocking command 15-3, 15-12
formats
DSU proprietary 15-4
frame header, customizing 12-5, 13-4, 14-8
frame identification code 6-23, 7-23
frame-relay command 18-2
framing
SONET STS-12c 13-4
framing command 4-3, 4-8, 4-14, 5-3, 5-25, 6-5, 6-7, 6-19, 6-22, 7-5, 7-7, 7-19, 7-22, 8-2, 8-3, 8-7, 8-11, 15-2, 15-13
framing type, specifying 4-14, 8-11
full-rate line 15-4
G
gigabit Ethernet (GE) line card
basic configuration 10-3, 11-3
provisioning 18-3
syntax 10-2
H
high availability
4-Port Channelized T3 Half-Height line card 4-24
I
idle character command 4-3, 4-8, 6-7, 6-20, 7-7, 7-19, 8-3, 8-8, 15-2, 15-3
idle-character command 15-13
idle pattern command 4-3, 4-15, 6-5, 6-24, 7-5, 7-24, 8-2, 8-12
ilmi manage command 3-18
impedance matching 4-10, 4-14, 8-11
inarp command 3-16
interface
bit-rates 15-4
interface command 3-8, 10-3, 11-3
IP
ip address configuration subcommand 10-3, 11-3, 12-3, 13-3, 14-3
K
keepalive command 4-3, 6-7, 7-7, 8-3, 12-2, 13-2, 14-2, 14-3
L
line card
1-Port Gigabit Ethernet Half-Height line card 10-2
1-Port Gigabit Ethernet line card 11-2
1-port OC-12 ATM 3-7
4-Port Channelized T3 Half-Height line card 4-4
4-Port Channelized T3 Half-Height line card, framing type 4-14
6-Port Channelized T3 8-3
6-Port OC-3/STM-1 Packet over SONET line card 12-3
8-Port Fast Ethernet Half-Height line card 9-2
channelized T3, framing type 8-11
configuring 8-7
functionality 5-17
resetting 16-5
location identification code 6-23, 7-23
logical channel group 4-18, 5-21, 5-23, 8-14
loopback
command 4-12, 4-16, 6-15, 7-15, 8-13, 10-4, 11-5, 12-6, 13-6, 14-8
loopback command 3-2, 3-14, 6-5, 6-6, 7-5, 7-6, 12-2, 15-3, 15-14
M
mac-address command 10-4, 11-4
maintenance data link (MDL) messages 4-10, 4-14, 6-23, 7-23, 8-11, 15-14
maximum transmission unit command
mdl 15-14
mdl command 4-10, 4-14, 6-23, 7-23, 8-11, 15-3, 15-14
mdl messages 4-10, 4-14, 6-23, 7-23, 8-11, 15-14
modes
controller configuration 4-5, 6-24, 7-24, 8-4
monitor
mtu command 3-2, 4-3, 6-7, 7-7, 8-3, 12-2, 13-2, 14-2, 14-3
multipoint subinterface 3-8
N
national bit command 15-16
negotiation auto command 10-3, 11-4
network command 18-4
network loopbacks 4-12, 4-16, 8-13
no channelized command 4-13, 8-10
no shutdown command 12-3, 13-3, 14-4
no t3 port bert command 4-9, 5-19, 8-8
NVRAM 5-18
O
oam-pvc command 3-19
oam retry command 3-18
OC-12 ATM line card
creating PVCs 3-5
creating VC class 3-5
OC-12 POS line card
configuring 13-3
scrambling POS synchronous payload envelope (SPE) 13-6, 14-8
OC-3 POS line card
framing mode 12-4
interoperability 12-5
line clock source 12-4
loopback testing 12-6
scrambling POS synchronous payload envelope (SPE) 12-6
OSPF routing 18-4
P
PA-2T3 port adapter 6-19, 7-18, 8-7
packet
classifying 18-5
HDLC 4-15, 6-20, 6-24, 7-19, 7-24, 8-12
performance reports, enabling 4-20, 8-17
PE to CE routing sessions
configuring 18-9
point-to-multipoint Frame Relay 18-2
port adapters, PA-T3 and PA-2T3 6-19, 7-18, 8-7
port number
T3 18-2
uplink 18-3
pos flag command 12-2, 12-5, 13-2, 13-4, 14-2, 14-8
pos framing command 12-2, 12-4, 13-2, 13-4, 14-2, 14-7
pos scramble-atm command 12-2, 12-6, 13-2, 13-6, 14-2, 14-8
POS synchronous payload envelope (SPE) 12-6, 13-6, 14-8
PRE card 13-6
privileged EXEC mode hw-module command 16-5
protocol ip command 3-15
protocols
policy propagation border gateway 18-5
pulse shaping 4-10, 4-14, 8-11
pvc command 3-10
pvc encapsulation command 3-2
pvc ilmi 3-10
pvp command 3-9
Q
QPPB
configuration example 18-5
R
redundancy
4-Port Channelized T3 Half-Height line card 4-24
related documentation xxiii
remote FDL ANSI loopback 6-32, 7-32
reset
e1 hw-module 5-2
t1 hw-module 5-4
reset line card 16-5
RIP
parameters 18-9
routing, OSPF 18-4
S
s1 SONET overhead byte 1-14, 3-14, 12-5, 13-5
scramble command 4-3, 4-8, 6-20, 7-19, 8-3, 8-7, 15-3, 15-16
show
version command 1-2, 2-1, 3-2, 4-2, 5-2, 6-2, 7-2, 8-2, 9-2, 10-2, 11-2, 12-2, 13-2, 14-2, 15-2
show atm pvc command 3-20
show atm vc command 3-19
show atm vp command 3-19
show interface slot/subslot/port command 9-5, 10-3, 11-3
show running-config command 16-1
shutdown 5-5
e1 hardware module 5-2
t1 hardware module 5-4
shutdown command 15-2, 15-3, 15-8
simulated line card installation 5-13
simulated line card removal 5-13
slot 15-4
slot naming convention 15-3
slot number
ESR line card 15-3
static route PE to CE routing sessions
configuring 18-10
STS-1
connection 6-8, 6-14, 7-8, 7-14
subinterface command 3-8
subrate interface 15-11
subrate T3 interface 4-6, 8-5, 18-2
subslot 15-4
synchronous payload envelope (SPE) 12-6, 13-6, 14-8
T
T1 5-11
clock source command 4-3, 6-6, 7-6, 8-2
controller and interface syntax 5-5
facility data link (FDL) 4-20, 8-17
framing command 4-3, 6-6, 7-6, 8-2
interface framing format 4-19, 8-16
setting clock source 4-20, 8-17
t1
clock source 5-5
default value 5-4
fdl 5-5
framing 5-5
linecode 5-5
loopback 5-5
yellow 5-5
t1 card command 5-4
T3
configuring an interface 15-5
controller, configuring 4-12, 4-17, 8-13
full-rate interface 6-12, 7-12, 15-5
interface, configuring 4-7, 8-6
interface configuration 15-4
serial interface 15-4
time slots 4-5
timeslots 8-4
traffic
troubleshooting
turning off yellow alarm detection 4-20, 8-16
U
unchannelized interface 15-4
unchannelized T3 line card
cable length 4-10
changing to channelized 8-9
idle character settings 4-8, 8-8
line clock source 4-11
loopback mode 4-12
maintenance data link messages 4-10
MDL messages 4-10
responding to remote T3 loopback commands 4-12
unit identification code 6-23, 7-23
uplink port 18-3
V
vbr-nrt command 3-17
vc-class command 3-7
VPN
defining 18-8
W
WRED 18-5
Y