Table Of Contents
About this Guide
Revision History
Document Objectives
Audience
Related Documentation
Document Conventions
Obtaining Optical Networking Information
Where to Find Safety and Warning Information
Cisco Optical Networking Product Documentation CD-ROM
Obtaining Documentation and Submitting a Service Request
About this Guide
This section explains the objectives, intended audience, and organization of this publication and describes the conventions that convey instructions and other information.
Note
The terms "Unidirectional Path Switched Ring" and "UPSR" may appear in Cisco literature. These terms do not refer to using Cisco ONS 15xxx products in a unidirectional path switched ring configuration. Rather, these terms, as well as "Path Protected Mesh Network" and "PPMN," refer generally to Cisco's path protection feature, which may be used in any topological network configuration. Cisco does not recommend using its path protection feature in any particular topological network configuration.
Revision History
Date
|
Notes
|
03/19/2007
|
Revision History Table added for the first time
|
03/23/2007
|
Corrected product part numbers for the UBIC-V and UBIC-H DS3 cables.
|
08/20/2007
|
Updated About this Guide chapter.
|
This section provides the following information:
•
Document Objectives
•
Audience
•
Related Documentation
•
Document Conventions
•
Obtaining Optical Networking Information
•
Obtaining Documentation and Submitting a Service Request
Document Objectives
The Engineering and Planning Guide provides information about the features, engineering guidelines, applications, configurations, and technical specifications for a Cisco ONS 15454 DWDM node and network. Use this guide in conjunction with the appropriate publications listed in the Related Documentation section.
Audience
To use this publication, you should be familiar with Cisco or equivalent optical transmission and telecommunications equipment. The Engineering and Planning Guide is intended for network planners and engineers.
Related Documentation
Use this Cisco ONS 15454 DWDM Engineering and Planning Guide, R7.x in conjunction with the following referenced publications:
•
Cisco ONS 15454 DWDM Procedure Guide, Release 7.2
•
Cisco ONS 15454 DWDM Reference Manual, Release 7.2
•
Cisco ONS 15454 DWDM Troubleshooting Guide, Release 7.0.1
•
Cisco ONS 15454 DWDM MetroPlanner Operations Guide, Release 7.0.1
•
Release Notes for the Cisco ONS 15454 Release 7.2
•
Release Notes for the Cisco ONS 15454 SDH Release 7.2
Document Conventions
This publication uses the following conventions:
Convention
|
Application
|
boldface
|
Commands and keywords in body text.
|
italic
|
Command input that is supplied by the user.
|
[ ]
|
Keywords or arguments that appear within square brackets are optional.
|
{ x | x | x }
|
A choice of keywords (represented by x) appears in braces separated by vertical bars. The user must select one.
|
Ctrl
|
The control key. For example, where Ctrl + D is written, hold down the Control key while pressing the D key.
|
screen font
|
Examples of information displayed on the screen.
|
boldface screen font
|
Examples of information that the user must enter.
|
< >
|
Command parameters that must be replaced by module-specific codes.
|
Note
Means reader take note. Notes contain helpful suggestions or references to material not covered in the document.
Caution 
Means
reader be careful. In this situation, the user might do something that could result in equipment damage or loss of data.
|
Warning 
|
IMPORTANT SAFETY INSTRUCTIONS
This warning symbol means danger. You are in a situation that could cause bodily injury. Before you work on any equipment, be aware of the hazards involved with electrical circuitry and be familiar with standard practices for preventing accidents. Use the statement number provided at the end of each warning to locate its translation in the translated safety warnings that accompanied this device. Statement 1071
SAVE THESE INSTRUCTIONS
|
Obtaining Optical Networking Information
This section contains information that is specific to optical networking products. For information that pertains to all of Cisco, refer to the Obtaining Documentation and Submitting a Service Request section.
Where to Find Safety and Warning Information
For safety and warning information, refer to the Cisco Optical Transport Products Safety and Compliance Information document that accompanied the product. This publication describes the international agency compliance and safety information for the Cisco ONS 15454 system. It also includes translations of the safety warnings that appear in the ONS 15454 system documentation.
Cisco Optical Networking Product Documentation CD-ROM
Optical networking-related documentation, including Cisco ONS 15xxx product documentation, is available in a CD-ROM package that ships with your product. The Optical Networking Product Documentation CD-ROM is updated periodically and may be more current than printed documentation.
Obtaining Documentation and Submitting a Service Request
For information on obtaining documentation, obtaining support, providing documentation feedback, security guidelines, and also recommended aliases and general Cisco documents, see the monthly What's New in Cisco Product Documentation, which also lists all new and revised Cisco technical documentation, at:
http://www.cisco.com/en/US/docs/general/whatsnew/whatsnew.html
Subscribe to the What's New in Cisco Product Documentation as a Really Simple Syndication (RSS) feed and set content to be delivered directly to your desktop using a reader application. The RSS feeds are a free service and Cisco currently supports RSS version 2.0.