Table Of Contents

IP SLA Feature Mapping

Verify IP SLA Version

IP SLA Feature Mapping

---

This chapter lists Cisco IOS IP SLAs feature support for Cisco IOS Release 12.3(14)T and later releases. It also provides the procedure to verify whether IP SLA is running on your Cisco IOS software.

Table 9-1 lists the IP SLA operations supported in different versions of Cisco IOS releases. Only features that were introduced or modified in Cisco IOS Release 12.3(14)T or a later release appear in the table.

Table 9-1 IP SLA Operations Mapped to Cisco IOS Releases

IP SLA Operations	Cisco IOS Software Releases
Echo	12.3(14)T
PathEcho	12.3(14)T
UDP Jitter	12.3(14)T
DNS	12.3(14)T
FTP	12.3(14)T
DHCP	12.3(14)T
UDP Echo	12.3(14)T
HTTP	12.3(14)T
TCP Connect	12.3(14)T
DLSw	12.3(14)T
RTP	12.4 (4)T
VoIP Gatekeeper Registration Delay	12.3(14)T
ICMP Jitter	12.4(6)T
VoIP Call Setup Post Dial Delay	12.3(14)T

Verify IP SLA Version

To verify the IP SLA version run the following command on your device:

show rtr application or show ip sla application

The output displayed on your device should be:

Version: Round Trip Time MIB 2.2.0, Infrastructure Engine-II

Time of last change in whole IP SLAs: *02:56:16.782 UTC Thu Apr 11 2002

Estimated system max number of entries: 22750

Estimated number of configurable operations: 22131

Number of Entries configured : 619

Number of active Entries : 611

Number of pending Entries : 0

Number of inactive Entries : 8

Supported Operation Types

Type of Operation to Perform: dhcp

Type of Operation to Perform: dns

Type of Operation to Perform: echo

Type of Operation to Perform: frameRelay

Type of Operation to Perform: ftp

Type of Operation to Perform: http

Type of Operation to Perform: icmpJitter

Type of Operation to Perform: jitter

Type of Operation to Perform: pathEcho

Type of Operation to Perform: pathJitter

Type of Operation to Perform: rtp

Type of Operation to Perform: slm controller

Type of Operation to Perform: slm frame-relay interface

Type of Operation to Perform: slm frame-relay pvc

Type of Operation to Perform: slm interface

Type of Operation to Perform: tcpConnect

Type of Operation to Perform: udpEcho

Type of Operation to Perform: voip

From the output, Version refers to the IP SLA version that is running on your device. In addition to this, you get information about:

•IPM operations that are supported

•Number of collectors that are configured

•Number of collectors that can be configured