Cisco IOS Software

Table Of Contents

Local AAA Server

Contents

Prerequisites for Local AAA Server

Information About Local AAA Server

Local Authorization Attributes: Overview

Local AAA Attribute Support

AAA Attribute Lists

Converting from RADIUS Format to Cisco IOS AAA Format

Validation of Attributes

How to Configure Local AAA Server

Defining a AAA Attribute List

Defining a Subscriber Profile

Monitoring and Troubleshooting a Local AAA Server

Configuration Examples for Local AAA Server

Local AAA Server: Example

Mapping from the RADIUS Version of a Particular Attribute to the Cisco IOS AAA Version: Example

Additional References

Related Document

Standards

MIBs

RFCs

Technical Assistance

Command Reference

Feature Information for Local AAA Server

Local AAA Server

---

First Published: March 28, 2005

Last Updated: January 2 2008

The Local AAA Server feature allows you to configure your router so that user authentication and authorization attributes currently available on AAA servers are available locally on the router. The attributes can be added to existing framework, such as the local user database or subscriber profile. The local AAA server provides access to the complete dictionary of Cisco IOS supported attributes.

Finding Feature Information in This Module

Your Cisco IOS software release may not support all of the features documented in this module. For the latest feature information and caveats, see the release notes for your Cisco IOS software release. To reach links to specific feature documentation in this module and to see a list of the releases in which each feature is supported, use the "Feature Information for Local AAA Server" section.

Finding Support Information for Platforms and Cisco IOS and Catalyst OS Software Images

Use Cisco Feature Navigator to find information about platform support and Cisco IOS and Catalyst OS software image support. To access Cisco Feature Navigator, go to http://www.cisco.com/go/cfn. An account on Cisco.com is not required.

Contents

•Prerequisites for Local AAA Server

•Information About Local AAA Server

•How to Configure Local AAA Server

•Configuration Examples for Local AAA Server

•Additional References

•Command Reference

•"Feature Information for Local AAA Server" section

Prerequisites for Local AAA Server

•Before using this feature, you must have the aaa new-model command enabled.

Information About Local AAA Server

To configure the Local AAA Server feature, you should understand the following concepts:

•Local Authorization Attributes: Overview

•Local AAA Attribute Support

•AAA Attribute Lists

•Validation of Attributes

Local Authorization Attributes: Overview

The AAA subsystem (authentication, authorization, and accounting) is responsible for managing all supported attributes that are available to the various services within the Cisco IOS software. As such, it maintains its own local dictionary of all supported attributes. However, prior to Cisco IOS Release 12.3(14)T, most of these authorization options were not available for local (on-box) authorizations.

Local AAA Attribute Support

Effective with Cisco IOS Release 12.3(14)T, you can configure your router so that AAA authentication and authorization attributes currently available on AAA servers are made available on existing Cisco IOS devices. The attributes can be added to existing framework, such as the local user database or subscriber profile. For example, an attribute list can now be added to an existing username, providing the ability for the local user database to act as a local AAA server. For situations in which the local username list is relatively small, this flexibility allows you to provide complete user authentication or authorization locally within the Cisco IOS software without having a AAA server. This ability can allow you to maintain your user database locally or provide a failover local mechanism without having to sacrifice policy options when defining local users.

A subscriber profile allows domain-based clients to have policy applied at the end-user service level. This flexibility allows common policy to be set for all users under a domain in one place and applied there whether or not user authorization is done locally. Effective with Cisco IOS Release 12.3(14)T, an attribute list can be added to the subscriber profile, allowing the profile to apply all attributes that can be applied to services using AAA servers. Attributes that are configured under the AAA attribute list are merged with the existing attributes that are generated with the existing subscriber profile and passed to the Subscriber Server Switch (SSS) framework for application.

---

Note Accounting is still done on a AAA server and is not supported by this feature.

---

AAA Attribute Lists

AAA attribute lists define user profiles that are local to the router. Every attribute that is known to the AAA subsystem is made available for configuration.

The AAA attributes that are defined in the AAA attribute list are standard RADIUS or TACACS+ attributes. However, they are in the Cisco IOS internal format for that attribute. The attributes must be converted from the RADIUS format (for a RADIUS case) to the Cisco IOS AAA interface format. TACACS+ attributes are generally identical to the Cisco IOS AAA interface format.

Converting from RADIUS Format to Cisco IOS AAA Format

You can use the show aaa attributes protocol radius command to get the Cisco IOS AAA format of the Internet Engineering Task Force (IETF) RADIUS attribute. The show command output provides a complete list of all the AAA attributes that are supported.

---

Note The conversion from RADIUS to internal AAA is done internally within the AAA framework. RADIUS vendor-specific attributes (VSAs) are usually accurately reflected during conversion. TACACS+ attributes are also usually identical to the local attributes and do not require the conversion process. However, IETF numbered attributes and some special VSAs often require the conversion process.

---

Validation of Attributes

Attributes are not validated at configuration. The AAA subsystem "knows" only the format that is expected by the services when the service defines a given attribute inside a definition file. However, it cannot validate the attribute information itself. This validation is done by a service when it first uses the attribute. This validation applies whether the AAA server is RADIUS or TACACS+. Thus, if you are not familiar with configuring a AAA server, it is advisable that you test your attribute list on a test device with the service that will be using the list before configuring and using it in a production environment.

How to Configure Local AAA Server

This section contains the following procedures:

•Defining a AAA Attribute List (required)

•Defining a Subscriber Profile (required)

•Monitoring and Troubleshooting a Local AAA Server (optional)

Defining a AAA Attribute List

To define an AAA attribute list, perform the following steps.

SUMMARY STEPS

1. enable

2. configure terminal

3. aaa attribute list list-name

4. attribute type {name} {value} [service service] [protocol protocol]

5. attribute type {name} {value} [service service] [protocol protocol]

6. attribute type {name} {value} [service service] [protocol protocol]

7. attribute type {name} {value}

8. attribute type {name} {value}

9. attribute type {name} {value}

DETAILED STEPS

	Command or Action	Purpose
Step 1	enable Example: Router> enable	Enables privileged EXEC mode. •Enter your password if prompted.
Step 2	configure terminal Example: Router# configure terminal	Enters global configuration mode.
Step 3	aaa attribute list list-name Example: Router (config)# aaa attribute list TEST	Defines a AAA attribute list.
Step 4	attribute type {name} {value} [service service] [protocol protocol] Example: Router (config)# attribute type addr-pool "pool name" service ppp protocol ip	Defines an IP address pool to use.
Step 5	attribute type {name} {value} [service service] [protocol protocol] Example: Router (config)# attribute type ip-unnumbered "loopback number" service ppp protocol ip	Defines the loopback interface to use.
Step 6	attribute type {name} {value} [service service] [protocol protocol] Example: Router (config)# attribute type vrf-id "vrf name" service ppp protocol ip	Defines the virtual route forwarding (VRF) to use.
Step 7	attribute type {name} {value} Example: Router (config)# attribute type ppp-authen-list "aaa list name"	Defines the AAA authentication list to use.
Step 8	attribute type {name} {value} Example: Router (config)# attribute type ppp-author-list "aaa list name"	Defines the AAA authorization list to use.
Step 9	attribute type {name} {value} Example: Router (config)# attribute type ppp-acct-list "aaa list name"	Defines the AAA accounting list to use.

Defining a Subscriber Profile

To define a subscriber profile, perform the following steps.

---

Note RADIUS users should use the show aaa attributes command to map the RADIUS version of the particular attribute to the Cisco IOS AAA version of the string attribute. See the example "Mapping from the RADIUS Version of a Particular Attribute to the Cisco IOS AAA Version: Example."

---

SUMMARY STEPS

1. enable

2. configure terminal

3. subscriber authorization enable

4. subscriber profile domain-name

5. service local

6. exit

7. aaa attribute list list-name

DETAILED STEPS

	Command or Action	Purpose
Step 1	enable Example: Router> enable	Enables privileged EXEC mode. •Enter your password if prompted.
Step 2	configure terminal Example: Router# configure terminal	Enters global configuration mode.
Step 3	subscriber authorization enable Example: Router (config)# subscriber authorization enable	Enables subscriber authorization.
Step 4	subscriber profile domain-name Example: Router (config)# subscriber profile cisco1.com	Specifies the username domain that has to be matched and enters subscriber profile configuration mode.
Step 5	service local Example: Router (subscriber-profile)# service local	Specifies that local subscriber authorization should be performed.
Step 6	exit Example: Router (subscriber-profile)# exit	Exits subscriber profile configuration mode.
Step 7	aaa attribute list list-name Example: Router (config)# aaa attribute list TEST	Defines the AAA attribute list from which RADIUS attributes are retrieved.

Monitoring and Troubleshooting a Local AAA Server

The following debug commands may be helpful in monitoring and troubleshooting, especially to ensure that domain-based service authorization is being triggered and that location authorization is being called on the local AAA server, which triggers the service.

SUMMARY STEPS

1. enable

2. debug aaa authentication

3. debug aaa authorization

4. debug aaa per-user

5. debug ppp authentication

6. debug ppp error

7. debug ppp forward

8. debug ppp negotiation

9. debug radius

10. debug sss error

DETAILED STEPS

	Command or Action	Purpose
Step 1	enable Example: Router> enable	Enables privileged EXEC mode. •Enter your password if prompted.
Step 2	debug aaa authentication Example: Router# debug aaa authentication	Displays the methods of authentication being used and the results of these methods.
Step 3	debug aaa authorization Example: Router# debug aaa authorization	Displays the methods of authorization being used and the results of these methods.
Step 4	debug aaa per-user Example: Router# debug aaa per-user	Displays information about PPP session per-user activities.
Step 5	debug ppp authentication Example: Router# debug ppp authentication	Indicates whether a client is passing authentication.
Step 6	debug ppp error Example: Router (config)# debug ppp error	Displays protocol errors and error statistics that are associated with PPP connection negotiation and operation.
Step 7	debug ppp forward Example: Router# debug ppp forward	Displays who is taking control of a session.
Step 8	debug ppp negotiation Example: Router# debug ppp negotiation	Displays PPP packets sent during PPP startup, where PPP options are negotiated.
Step 9	debug radius Example: Router# debug radius	Displays information about the RADIUS server.
Step 10	debug sss error Example: Router# debug sss error	Displays diagnostic information about errors that may occur during SSS call setup.

Configuration Examples for Local AAA Server

This section contains the following configuration examples:

•Local AAA Server: Example

•Mapping from the RADIUS Version of a Particular Attribute to the Cisco IOS AAA Version: Example

Local AAA Server: Example

The following example shows a Point to Point over Ethernet (PPPoE) group named "bba-group" that is configured for subscriber profile cisco.com (thus, any user with the domain name cisco.com will execute the subscriber profile cisco.com authorization policy). The cisco.com subscriber profile is configured to attach the AAA attribute list "TEST," which has both "ip vrf forwarding" and "ip unnumbered" configured for PPP service under Link Control Protocol (LCP) negotiation. This configuration will essentially cause the named attributes to be applied on the session with the cisco.com domain under the bba-group "pppoe grp1."

aaa authentication ppp template1 local

aaa authorization network template1 local 

!

aaa attribute list TEST

   attribute type interface-config "ip unnumbered FastEthernet0" service ppp protocol lcp

   attribute type interface-config "ip vrf forwarding blue" service ppp protocol lcp

!

ip vrf blue

 description vrf blue template1

 rd 1:1

 route-target export 1:1

 route-target import 1:1

!

subscriber authorization enable

!

subscriber profile cisco.com

 service local

 aaa attribute list TEST

!

bba-group pppoe grp1

 virtual-template 1

 service profile cisco.com

!

interface Virtual-Template1

 no ip address

 no snmp trap link-status

 no peer default ip address

 no keepalive

 ppp authentication pap template1

 ppp authorization template1

!

---

Note In some versions of Cisco IOS software, it is better to use the explicit attribute instead of interface- config because it provides better scalability (full VAccess interfaces are not required, and sub interfaces could be used to provide the service). In such a case, you might configure "attribute type ip-unnumbered `FastEthernet0' service ppp protocol ip" instead of "attribute type interface-config `ip unnumbered FastEthernet0' service ppp protocol lcp."

---

Mapping from the RADIUS Version of a Particular Attribute to the Cisco IOS AAA Version: Example

The following output example of the show aaa attributes command lists RADIUS attributes, which can be used when configuring this feature.

Router# show aaa attributes protocol radius

IETF defined attributes:

   Type=4     Name=acl                            Format=Ulong

      Protocol:RADIUS

        Unknown       Type=11    Name=Filter-Id             Format=Binary    

Converts attribute 11 (Filter-Id) of type Binary into an internal attribute 

named "acl" of type Ulong.  As such, one can configure this attributes locally

by using the attribute type "acl."

Cisco VSA attributes:

  Type=157   Name=interface-config               Format=String

Simply expects a string for the attribute of type "interface-config."

---

Note The aaa attribute list command requires the Cisco IOS AAA version of an attribute, which is defined in the "Name" field above.

---

Additional References

The following sections provide references related to Local AAA Server.

Related Document

Related Topic	Document Title
AAA, AAA attribute lists, AAA method lists, and subscriber profiles	The chapter "Configuring Local AAA Server, User Database—Domain to VRF" in Cisco 10000 Series Broadband Aggregation and Leased-Line Configuration Guide
Cisco IOS security commands	Cisco IOS Security Command Reference

Standards

Standard	Title
None	—

MIBs

MIB	MIBs Link
None	To locate and download MIBs for selected platforms, Cisco IOS releases, and feature sets, use Cisco MIB Locator found at the following URL: http://www.cisco.com/go/mibs

RFCs

RFC	Title
None	—

Technical Assistance

Description

Link

The Cisco Support website provides extensive online resources, including documentation and tools for troubleshooting and resolving technical issues with Cisco products and technologies. To receive security and technical information about your products, you can subscribe to various services, such as the Product Alert Tool (accessed from Field Notices), the Cisco Technical Services Newsletter, and Really Simple Syndication (RSS) Feeds. Access to most tools on the Cisco Support website requires a Cisco.com user ID and password.

http://www.cisco.com/techsupport

Command Reference

The following commands are introduced or modified in the feature or features documented in this module. For information about these commands, see the Cisco IOS Security Command Reference at http://www.cisco.com/en/US/docs/ios/security/command/reference/
sec_book.html. For information about all Cisco IOS commands, use the Command Lookup Tool at http://tools.cisco.com/Support/CLILookup or a Cisco IOS master commands list.

•aaa attribute list

•attribute type

Feature Information for Local AAA Server

Not all commands may be available in your Cisco IOS software release. For release information about a specific command, see the command reference documentation.

Use Cisco Feature Navigator to find information about platform support and software image support. Cisco Feature Navigator enables you to determine which Cisco IOS and Catalyst OS software images support a specific software release, feature set, or platform. To access Cisco Feature Navigator, go to http://www.cisco.com/go/cfn. An account on Cisco.com is not required.

---

Note Table 1 lists only the Cisco IOS software release that introduced support for a given feature in a given Cisco IOS software release train. Unless noted otherwise, subsequent releases of that Cisco IOS software release train also support that feature.

---

Table 1 Feature Information for Local AAA Server 

Feature Name	Releases	Feature Information
Local AAA Server	12.3(14)T 12.2(28)SB 12.2(33)SRC Cisco IOS XE Release 2.1	The Local AAA Server feature allows you to configure your router so that user authentication and authorization attributes currently available on AAA servers are available locally on the router. The attributes can be added to existing framework, such as the local user database or subscriber profile. The local AAA server provides access to the complete dictionary of Cisco IOS supported attributes. In Cisco IOS XE Release 2.1, this feature was introduced on Cisco ASR 1000 Series Routers.

Any Internet Protocol (IP) addresses used in this document are not intended to be actual addresses. Any examples, command display output, and figures included in the document are shown for illustrative purposes only. Any use of actual IP addresses in illustrative content is unintentional and coincidental.

© 2000-2008 Cisco Systems, Inc. All rights reserved.