Table Of Contents
BGP Support for Fast Peering Session Deactivation
BGP Support for Fast Peering Session Deactivation
The BGP Support for Fast Peering Session Deactivation feature introduces an event-driven notification system that allows a Border Gateway Protocol (BGP) process to monitor BGP peering sessions on a per-neighbor basis. This feature improves the response time of BGP to adjacency changes by allowing BGP to detect an adjacency change and deactivate the terminated session in between standard BGP scanning intervals. Enabling this feature improves overall BGP convergence.
Configuration Information
Configuration information is included in the "Configuring BGP Neighbor Session Options" module of the Cisco IOS BGP Configuration Guide, Release 12.4T, at the following URL:
http://www.cisco.com/univercd/cc/td/doc/product/software/ios124/124tcg/tbgp_c/brbpeer.htm
The following sections provide information about this feature:
•
BGP Support for Fast Peering Session Deactivation
•
•
For a complete list of features included in the "Configuring BGP Neighbor Session Options" module, see the Feature Information table located toward the end of the module.
Command Reference Information
Release 12.2SB
The following commands are new or modified for this feature:
•
Detailed information about these commands is included in the Cisco IOS IP Routing Protocols Command Reference, Release 12.2SB, at the following URL:
http://www.cisco.com/univercd/cc/td/doc/product/software/ios122sb/cr/sbirp_r/index.htm
Release 12.2SX
The following commands are new or modified for this feature:
•
Detailed information about these commands is included in the Cisco IOS IP Routing Protocols Command Reference, Release 12.2SX, at the following URL:
http://www.cisco.com/univercd/cc/td/doc/product/software/ios122sx/cr/sxipr_r/index.htm
Master Commands Lists
Cisco IOS master commands lists provide an alphabetical list of all Cisco IOS commands in a Cisco IOS release.
Cisco IOS new, modified, removed, and replaced commands lists provide an alphabetized list of all new, modified, removed, and replaced commands in a Cisco IOS release.
Release 12.2SB
Cisco IOS Master Commands List, Release 12.2SB, at the following URL:
http://www.cisco.com/univercd/cc/td/doc/product/software/ios122sb/122sbrln/122sbix.htm
Any Internet Protocol (IP) addresses used in this document are not intended to be actual addresses. Any examples, command display output, and figures included in the document are shown for illustrative purposes only. Any use of actual IP addresses in illustrative content is unintentional and coincidental.
© 2006, 2007 Cisco Systems, Inc. All rights reserved.
Guest
