Table Of Contents
CNS Image Agent
The CNS Image Agent feature is an infrastructure in Cisco IOS software to enable automated installation and activation of Cisco IOS images on Cisco IOS networking devices.
Configuration information is included in the "Cisco Networking Services" module of the Cisco IOS Network Management Configuration Guide, Release 12.4T, at the following URL:
The following sections provide information about this feature:
•Prerequisites for CNS
•Restrictions for CNS
•CNS Image Agent
•Configuring the CNS Image Agent
•Retrieving a CNS Image from a Server
•Troubleshooting CNS Agents
•Enabling and Configuring CNS Agents: Example
•Retrieving a CNS Image from a Server: Examples
For a complete list of features included in the "Cisco Networking Services" module, see the Feature Information Table located toward the end of the module.
Command Reference Information
Command reference information is included in the Cisco IOS Networking Services Command Reference, Release 12.2SB, at the following URL:
New or Modified Commands
The following commands are new or modified for this feature:
•clear cns image connections
•clear cns image status
•cns image password
•cns image retrieve
•cns image retry
•debug cns image
•show cns image connections
•show cns image inventory
•show cns image status
Any Internet Protocol (IP) addresses used in this document are not intended to be actual addresses. Any examples, command display output, and figures included in the document are shown for illustrative purposes only. Any use of actual IP addresses in illustrative content is unintentional and coincidental.
© 2006 Cisco Systems, Inc. All rights reserved.