Cisco RFGW-10 UEQAM System Specifications

This chapter lists the system specifications and the power requirements for the Cisco RFGW-10 UEQAM.

System Specifications

Table 7-1 lists the system specifications for Cisco RFGW-10 UEQAM.

Table 7-1 Cisco RFGW-10 UEQAM System Specifications

 

Model/Component
Specifications

Physical specifications

Height: 13RU (22.75 in./577.85mm)

Width: 17.30 in. (439.4 mm) without rack-mounts installed. 17.48” (444mm) with rack-mounts installed.

Overall Depth: 24.23 in. (612.9 mm)

Weight: 275 lb (125 kg) (with dual DC PEMs and RFGW DS-48 line cards)

Supervisor Slots

2 in front of chassis

Universal RF Card Slots

10 in front of chassis

RF Switch Slots

12 in rear of chassis

TCC Slots

2 in rear of chassis

DC PEM

2 PS Bays in rear of chassis

Fan Tray

1 in rear of chassis

Airflow

Front-to-back

Power Requirements

Table 7-2 lists the power requirements for the Cisco RFGW-10 UEQAM.

Table 7-2 Cisco RFGW-10 UEQAM Power Requirements

 

Component/Attribute
Requirements

Redundant power supply

Dual power supply by default; DC only

Power input

Worldwide ranging DC (–40VDC to –60VDC: –48VDC Nominal)

Power consumption

Maximum (DC): 4536W

Heat Dissipation

4536W (15,474.06 Btu/hour)

Airflow

Front to back flow with 800 CFM exhaust volume (main fan tray + DC PEM fans) at full flow

Operating temperature (nominal)

32 to 104ºF (0 to 40ºC)

Operating temperature (short-term)

23 to 122°F (–5 to 50°C)

Operating humidity (nominal) (relative humidity)

10 to 85%

Operating humidity (short-term)

5 to 90%

Storage temperature

–40 to 158°F (–40 to 70°C)

Storage (relative humidity)

5 to 95%

Operating altitude

–200 to 10000 feet (–60 to 3050 m)

Altitude, nonoperational: over allowable temperature range

–200 to 30,000 feet (–60 to 9144 m)

Network Equipment Building Standards (NEBS)

GR-1089 and GR-63

EMC standards

 

CE marking