この製品のマニュアルセットは、偏向のない言語を使用するように配慮されています。このマニュアルセットでの偏向のない言語とは、年齢、障害、性別、人種的アイデンティティ、民族的アイデンティティ、性的指向、社会経済的地位、およびインターセクショナリティに基づく差別を意味しない言語として定義されています。製品ソフトウェアのユーザーインターフェイスにハードコードされている言語、RFP のドキュメントに基づいて使用されている言語、または参照されているサードパーティ製品で使用されている言語によりドキュメントに例外が存在する場合があります。シスコのインクルーシブランゲージに対する取り組みの詳細は、こちらをご覧ください。
このドキュメントは、米国シスコ発行ドキュメントの参考和訳です。リンク情報につきましては、日本語版掲載時点で、英語版にアップデートがあり、リンク先のページが移動/変更されている場合がありますことをご了承ください。あくまでも参考和訳となりますので、正式な内容については米国サイトのドキュメントを参照ください。
目次
この章は、次の内容で構成されています。
次に、CIMC イベントのログを表示する例を示します。
Server# scope cimc Server /cimc # scope log Server /cimc/log # show entries Time Source Description ------------------- ---------------- ---------------------------------------- 1970 Jan 4 18:55:36 BMC:kernel:- <7>/build/trunk/bmc/drivers/pilot2_i2c/pilot2_i2c.c:306:I2c Controller-4 DAT is stuck-low, issuing One Clock Pulse. 1970 Jan 4 18:55:36 BMC:kernel:- <7>/build/trunk/bmc/drivers/pilot2_i2c/pilot2_i2c.c:301:I2c Controller-4 Loop:[0]. 1970 Jan 4 18:55:36 BMC:kernel:- " <7>/build/trunk/bmc/drivers/pilot2_i2c/pilot2_i2c.c:422: Controller-4 has a stuck bus, attempting to clear it now... " 1970 Jan 4 18:55:36 BMC:kernel:- " <7>/build/trunk/bmc/drivers/pilot2_i2c/pilot2_i2c.c:402: Controller-4 Initiating I2c recovery sequence. " 1970 Jan 4 18:55:36 BMC:IPMI:480 last message repeated 22 times 1970 Jan 4 18:55:28 BMC:IPMI:480 " mcddI2CDrv.c:850:PI2CWriteRead: ioctl to driver failed to read Bus[f4].Dev[5e]! ErrorStatus[77] " 1970 Jan 4 18:55:33 BMC:IPMI:486 last message repeated 17 times 1970 Jan 4 18:55:28 BMC:IPMI:486 " mcddI2CDrv.c:850:PI2CWriteRead: ioctl to driver failed to read Bus[f4].Dev[b0]! ErrorStatus[77] " 1970 Jan 4 18:55:31 BMC:IPMI:486 last message repeated 17 times 1970 Jan 4 18:55:26 BMC:IPMI:486 " mcddI2CDrv.c:850:PI2CWriteRead: ioctl to driver failed to read Bus[f4].Dev[b2]! ErrorStatus[77] " 1970 Jan 4 18:55:26 BMC:kernel:- <7>/build/trunk/bmc/drivers/pilot2_i2c/pilot2_i2c.c:306:I2c Controller-4 DAT is stuck-low, issuing One Clock Pulse. 1970 Jan 4 18:55:26 BMC:kernel:- <7>/build/trunk/bmc/drivers/pilot2_i2c/pilot2_i2c.c:301:I2c Controller-4 Loop:[8]. --More--
コマンドまたはアクション | 目的 | |
---|---|---|
ステップ 1 | Server# scope cimc | CIMC コマンド モードを開始します。 |
ステップ 2 | Server /cimc # scope log | CIMC ログ コマンド モードを開始します。 |
ステップ 3 | Server /cimc/log # clear | CIMC ログをクリアします。 |
次に、CIMC イベントのログをクリアする例を示します。
Server# scope cimc Server /cimc # scope log Server /cimc/log # clear
CIMC ログ エントリを受信するように 1 台または 2 台のリモート syslog サーバのプロファイルを設定できます。
次に、リモート syslog サーバ プロファイルを設定し、CIMC ログ エントリの送信をイネーブルにする例を示します。
Server# scope cimc Server /cimc # scope log Server /cimc/log # scope server 2 Server /cimc/log/server # set server-ip 192.0.2.34 Server /cimc/log/server *# set enabled yes Server /cimc/log/server *# commit Server /cimc/log/server #
次に、システム イベント ログを表示する例を示します。
Server# scope sel Server /sel # show entries Time Severity Description ------------------- ------------- ---------------------------------------- [System Boot] Informational " LED_PSU_STATUS: Platform sensor, OFF event was asserted" [System Boot] Informational " LED_HLTH_STATUS: Platform sensor, GREEN was asserted" [System Boot] Normal " PSU_REDUNDANCY: PS Redundancy sensor, Fully Redundant was asserted" [System Boot] Normal " PSU2 PSU2_STATUS: Power Supply sensor for PSU2, Power Supply input lost (AC/DC) was deasserted" [System Boot] Informational " LED_PSU_STATUS: Platform sensor, ON event was asserted" [System Boot] Informational " LED_HLTH_STATUS: Platform sensor, AMBER was asserted" [System Boot] Critical " PSU_REDUNDANCY: PS Redundancy sensor, Redundancy Lost was asserted" [System Boot] Critical " PSU2 PSU2_STATUS: Power Supply sensor for PSU2, Power Supply input lost (AC/DC) was asserted" [System Boot] Normal " HDD_01_STATUS: Drive Slot sensor, Drive Presence was asserted" [System Boot] Critical " HDD_01_STATUS: Drive Slot sensor, Drive Presence was deasserted" [System Boot] Informational " DDR3_P2_D1_INFO: Memory sensor, OFF event was asserted" 2001-01-01 08:30:16 Warning " PSU2 PSU2_VOUT: Voltage sensor for PSU2, failure event was deasserted" 2001-01-01 08:30:16 Critical " PSU2 PSU2_VOUT: Voltage sensor for PSU2, non-recoverable event was deasserted" 2001-01-01 08:30:15 Informational " LED_PSU_STATUS: Platform sensor, ON event was asserted" 2001-01-01 08:30:15 Informational " LED_HLTH_STATUS: Platform sensor, AMBER was asserted" 2001-01-01 08:30:15 Informational " LED_HLTH_STATUS: Platform sensor, FAST BLINK event was asserted" 2001-01-01 08:30:14 Non-Recoverable " PSU2 PSU2_VOUT: Voltage sensor for PSU2, non-recoverable event was asserted" 2001-01-01 08:30:14 Critical " PSU2 PSU2_VOUT: Voltage sensor for PSU2, failure event was asserted" --More--
コマンドまたはアクション | 目的 | |
---|---|---|
ステップ 1 | Server# scope sel | システム イベント ログ コマンド モードを開始します。 |
ステップ 2 | Server /sel # clear | 処理の確認を求めるプロンプトが表示されます。 プロンプトに y を入力すると、システム イベント ログがクリアされます。 |
次に、システム イベント ログをクリアする例を示します。
Server# scope sel Server /sel # clear This operation will clear the whole sel. Continue?[y|N]y