この製品のマニュアルセットは、偏向のない言語を使用するように配慮されています。このマニュアルセットでの偏向のない言語とは、年齢、障害、性別、人種的アイデンティティ、民族的アイデンティティ、性的指向、社会経済的地位、およびインターセクショナリティに基づく差別を意味しない言語として定義されています。製品ソフトウェアのユーザーインターフェイスにハードコードされている言語、RFP のドキュメントに基づいて使用されている言語、または参照されているサードパーティ製品で使用されている言語によりドキュメントに例外が存在する場合があります。シスコのインクルーシブランゲージに対する取り組みの詳細は、こちらをご覧ください。
このドキュメントは、米国シスコ発行ドキュメントの参考和訳です。リンク情報につきましては、日本語版掲載時点で、英語版にアップデートがあり、リンク先のページが移動/変更されている場合がありますことをご了承ください。あくまでも参考和訳となりますので、正式な内容については米国サイトのドキュメントを参照ください。
この章では、Cisco ASR 9000 シリーズ ルータのビデオ モニタリング サービスを設定および監視するために使用するコマンドについて説明します。
ビデオ モニタリングの概念、設定作業、および例については、『Cisco ASR 9000 Series Aggregation Services Router Multicast Configuration Guide』の「Implementing Video Monitoring Service on Cisco ASR 9000 Series Routers」の章を参照してください。
宛先にクローンされたすべてのパケットをクリアするには、EXEC モードで clear performance traffic clone profile コマンドを使用します。
clear performance traffic clone profile profile name
profile name | パケットをクリアする必要のあるクローンのプロファイル名。 |
なし
EXEC
リリース | 変更箇所 |
---|---|
リリース 4.0.1 | このコマンドが導入されました。 |
このコマンドを使用するには、適切なタスク ID を含むタスク グループに関連付けられているユーザ グループに属している必要があります。 ユーザ グループの割り当てのためにコマンドを使用できない場合は、AAA 管理者に連絡してください。
タスク ID | 操作 |
---|---|
netflow |
読み取り、書き込み |
次に、コマンドライン インターフェイスから clear performance traffic clone profile コマンドを実行する例を示します。
RP/0/RSP0/CPU0:routerclear performance traffic clone profile
すべてのポリシー マップ統計情報をクリアするには、EXEC モードで clear performance traffic statistics コマンドを使用します。 このコマンドは、集約統計情報を除くすべての間隔統計情報をクリアします。
clear performance traffic statistics interface type instance input
interface |
統計情報をクリアする必要があるすべてのインターフェイスまたは特定のインターフェイスを指定します。 |
input |
トラフィックの方向を指定します。 |
なし
EXEC
リリース |
変更箇所 |
---|---|
リリース 3.9.0 |
このコマンドが導入されました。 |
このコマンドを使用するには、適切なタスク ID を含むタスク グループに関連付けられているユーザ グループに属している必要があります。 ユーザ グループの割り当てのためにコマンドを使用できない場合は、AAA 管理者に連絡してください。
タスク ID |
操作 |
---|---|
netflow |
読み取り、書き込み |
次に、コマンドライン インターフェイスから clear performance traffic statistics コマンドを実行する例を示します。
RP/0/RSP0/CPU0:router clear performance traffic statistics interface gigabitEthernet 0/0/0/8 input
アクティブ TCA(しきい値超過アラート)を表示するには、EXEC モードで show performance traffic alerts コマンドを使用します。 TCA は、設定されたパラメータが満たされる場合に設定されます。 TCA は、設定されたパラメータが true でない場合にクリアされます。 イベントは、設定およびクリアの両方について生成されます。
show performance traffic alerts interface type instance input
interface |
パフォーマンス トラフィック アラートが設定される特定のインターフェイスまたはすべてのインターフェイスを指定します。 |
なし
EXEC
リリース |
変更箇所 |
---|---|
リリース 3.9.0 |
このコマンドが導入されました。 |
このコマンドを使用するには、適切なタスク ID を含むタスク グループに関連付けられているユーザ グループに属している必要があります。 ユーザ グループの割り当てのためにコマンドを使用できない場合は、AAA 管理者に連絡してください。
タスク ID |
操作 |
---|---|
netflow |
読み取り |
これは、show performance traffic alerts コマンドの出力例です。
RP/0/RSP0/CPU0:router# show performance traffic alerts interface ten0/6/0/0 input
Interface: TenGigE0/6/0/0 Direction: input
GROUP Alerts
Class: class1
Num Flows: 1
Num Grouped Alerts: 1
Highest Alert Severity: Warning
React ID Severity Metric
-------- -------- ------
4 Critical Flow Count
FLOW Alerts
Flow ID: 3496 Class: class1
Num Alerts: 3
Highest Alert Severity: Warning
React ID Severity Metric
-------- -------- ------
1 Critical
2 Critical Media Rate Variation
5 Critical Delay Factor
フィールド |
説明 |
||
---|---|---|---|
Group/Flow Alerts |
このアラートは、グループ化されるか、または単一フローに適用されます。 |
||
Class |
ポリシーで使用されるクラス マップ名。 |
||
Flow ID |
|
||
Num Flows |
このグループ アラートで設定されたフロー数。 |
||
Num Grouped Alerts |
グループ化されたアラートの合計数。 |
||
Num Alerts |
フローにより設定されたアラートの合計数。 |
||
Severity |
設定された重大度を示します。 |
||
Highest Alert Severity |
設定されたアラートの最も高い重大度を示します。 |
||
React ID |
設定された反応 ID を指定します。 |
||
Metric |
設定されたアラートのタイプを示します。 |
設定されたトラップ、クローン プロファイル、および関連付けられたクローン フローを表示するには、EXEC モードで show performance traffic clone profile コマンドを使用します。
show performance traffic clone profile profile name
profile name | クローンのプロファイル名。 |
なし
EXEC
リリース | 変更箇所 |
---|---|
リリース 4.0.1 | このコマンドが導入されました。 |
このコマンドを使用するには、適切なタスク ID を含むタスク グループに関連付けられているユーザ グループに属している必要があります。 ユーザ グループの割り当てのためにコマンドを使用できない場合は、AAA 管理者に連絡してください。
タスク ID | 操作 |
---|---|
netflow |
読み取り |
次に、コマンドライン インターフェイスから show performance traffic clone profile コマンドを実行する例を示します。
RP/0/RSP0/CPU0:routershow performance traffic clone profile
-------------------------------------------------------------------------------
Total number of trap and clone profiles: 3
-------------------------------------------------------------------------------
Profile Name: profile1 ID: 1
-------------------------------------------------------------------------------
description: new_profile
egress interface: GigabitEthernet0_0_0_8
total number of clone flows: 2
-------------------------------------------------------------------------------
clone id source destination
1 2.2.2.2 229.1.1.1
2 2.2.2.2 229.1.1.2
-------------------------------------------------------------------------------
Profile Name: profile2 ID: 2
-------------------------------------------------------------------------------
description: second profile
egress interface: GigabitEthernet0_0_0_19
total number of clone flows: 5
-------------------------------------------------------------------------------
clone id source destination
1 1.1.1.1 229.1.1.10
2 1.1.1.1 229.1.1.11
3 1.1.1.1 229.1.1.12
4 1.1.1.1 229.1.1.14
5 1.1.1.1 229.1.1.15
-------------------------------------------------------------------------------
Profile Name: profile3 ID: 3
-------------------------------------------------------------------------------
description: third profile
egress interface: TenGigE0_2_0_1
total number of clone flows: 13
-------------------------------------------------------------------------------
clone id source destination
1 12.12.12.12 233.1.1.1
2 12.12.12.12 233.1.1.2
3 12.12.12.12 233.1.1.3
4 12.12.12.12 233.1.1.4
5 12.12.12.12 233.1.1.5
6 12.12.12.12 233.1.1.6
7 12.12.12.12 233.1.1.7
8 12.12.12.12 233.1.1.8
9 12.12.12.12 233.1.1.10
10 12.12.12.12 233.1.1.11
11 12.12.12.12 233.1.1.12
12 12.12.12.12 233.1.1.16
13 12.12.12.12 233.1.1.18
ビデオ モニタリング機能のポリシー マップ統計情報を表示するには、EXEC モードで show policy-map type performance-traffic コマンドを使用します。 このコマンドにより、サービス プロバイダーのビデオ フローの Quality of Experience(QoE)を監視できます。
show policy-map type performance-traffic interface type instance [ aggregate | brief | cumulative | detail | input | last | match ]
interface type instance |
表示する特定のインターフェイスを指定します。 |
aggregate |
(任意)フローの合計数と最終変更時刻を表示します。 |
brief |
(任意)キー メトリックだけを表示します。 |
cumulative |
(任意)フローのライフタイムにおける累積統計情報を表示します。 |
detail |
(任意)詳細なメトリックを表示します。 |
input |
(任意)入力トラフィック ポリシーを表示します。 |
last |
(任意)最後の n 個の間隔を表示します。 |
match |
(任意)フィルタリングする一致基準を指定します。 |
コマンドのデフォルト値は 1 です。
EXEC
リリース |
変更箇所 |
---|---|
リリース 3.9.0 |
このコマンドが導入されました。 |
このコマンドを使用するには、適切なタスク ID を含むタスク グループに関連付けられているユーザ グループに属している必要があります。 ユーザ グループの割り当てのためにコマンドを使用できない場合は、AAA 管理者に連絡してください。
タスク ID |
操作 |
---|---|
netflow |
読み取り |
次に、show policy-map type performance-traffic コマンドのさまざまな出力例を示します。
RP/0/RSP0/CPU0:router# show policy-map type performance-traffic interface tenGigE 0/6/0/0 brief
-------------------------------------------------------------------------------
Interface: TenGigE0/6/0/0 Direction: input
Service-Policy: policy1
-------------------------------------------------------------------------------
Total Num Flows: 2
FlowID Flow Key MRV(%) DF (ms)
------ -------- ------ -------
3528 6.1.1.2:4000 -> 225.0.0.1:4000 UDP 0.000 3.337
3496 6.1.1.2:4000 -> 225.0.0.101:4000 UDP 50.000 2502.220
-------------------------------------------------------------------------------
Class Name Num-Flows
---------- ---------
class1 2
-------------------------------------------------------------------------------
RP/0/RSP0/CPU0:router#show policy-map type performance-traffic interface tenGigE0/6/0/0 aggregate brief
Interface: TenGigE0/6/0/0 Direction: input
Number of flows : 2
Last flow add/delete : Tue Nov 3 13:46:56 2009
RP/0/RSP0/CPU0:ios#show policy-map type performance-traffic interface ten0/6/0/0 detail
Tue Nov 3 13:52:02.046 EST
-------------------------------------------------------------------------------
Interface: TenGigE0/6/0/0 Direction: input
Service-Policy: policy1
-------------------------------------------------------------------------------
Total Num Flows: 2
Flow: 3528 Key: 6.1.1.2:4000 -> 225.0.0.1:4000 UDP
Class: class1 Total Intvls: 1
Intvl# 1, Updated at: Tue Nov 3 13:51:56 2009, Duration: 10 s
Metric type: IP-CBR
MRV: 0.000 % DF: 3.338 ms
Avg Packet Rate: 300.00 pps Total Packets: 3000
Avg Bit Rate: 3158 kbps Total Bytes: 3948000
Avg Packet Len: 1316.00 B
IPv4 TTL: 63
Flow: 3496 Key: 6.1.1.2:4000 -> 225.0.0.101:4000 UDP
Class: class1 Total Intvls: 1
Intvl# 1, Updated at: Tue Nov 3 13:51:54 2009, Duration: 10 s
Metric type: IP-CBR
MRV: 50.000 % DF: 2502.220 ms
Avg Packet Rate: 450.00 pps Total Packets: 4500
Avg Bit Rate: 4737 kbps Total Bytes: 5922000
Avg Packet Len: 1316.00 B
IPv4 TTL: 63
-------------------------------------------------------------------------------
Class Name Num-Flows
---------- ---------
class1 2
-------------------------------------------------------------------------------
RP/0/RSP0/CPU0:router#show policy-map type performance-traffic interface tenGigE0/6/0/0 last 5
-------------------------------------------------------------------------------
Interface: TenGigE0/6/0/0 Direction: input
Service-Policy: policy1
-------------------------------------------------------------------------------
Total Num Flows: 2
Flow: 3528 Key: 6.1.1.2:4000 -> 225.0.0.1:4000 UDP
Class: class1 Total Intvls: 5
Intvl# Updated at Durn MRV(%) DF(ms)
1 Tue Nov 3 13:53:26 2009 10 0.000 3.337
2 Tue Nov 3 13:53:16 2009 10 0.000 3.337
3 Tue Nov 3 13:53:06 2009 10 0.000 3.337
4 Tue Nov 3 13:52:56 2009 10 0.000 3.337
5 Tue Nov 3 13:52:46 2009 10 0.000 3.337
Flow: 3496 Key: 6.1.1.2:4000 -> 225.0.0.101:4000 UDP
Class: class1 Total Intvls: 5
Intvl# Updated at Durn MRV(%) DF(ms)
1 Tue Nov 3 13:53:24 2009 10 50.000 2502.220
2 Tue Nov 3 13:53:14 2009 10 50.000 2502.220
3 Tue Nov 3 13:53:04 2009 10 50.000 2502.220
4 Tue Nov 3 13:52:54 2009 10 50.000 2502.220
5 Tue Nov 3 13:52:44 2009 10 50.000 2502.220
-------------------------------------------------------------------------------
Class Name Num-Flows
---------- ---------
class1 2
-------------------------------------------------------------------------------
RP/0/RSP0/CPU0:router#show policy-map type performance-traffic interface tenGigE0/6/0/0 match flow-id 3496
-------------------------------------------------------------------------------
Interface: TenGigE0/6/0/0 Direction: input
Service-Policy: policy1
-------------------------------------------------------------------------------
Total Num Flows: 2
FlowID Flow Key MRV(%) DF (ms)
------ -------- ------ -------
3496 6.1.1.2:4000 -> 225.0.0.101:4000 UDP 50.000 2502.220
-------------------------------------------------------------------------------
Num Flows Displayed: 1
-------------------------------------------------------------------------------
フィールド |
説明 |
---|---|
DF |
遅延係数。 |
Mrv |
メディア レート変動。 |
Total intvls |
ユーザ定義間隔の数。 |
Service-policy |
このフローのサービス ポリシーの名前。 |
Duration |
間隔の長さ。 |
Num-flows |
このポリシーに一致するフローの合計数。 |
Flow |
一意のフロー ID。 |