Cisco PGW 2200 Softswitch Release 9.8 Dial Plan Guide
Preface
Downloads: This chapterpdf (PDF - 95.0KB) The complete bookPDF (PDF - 5.97MB) | Feedback

Preface

Table Of Contents

Preface

Document Objectives

Audience

Related Documentation

Obtaining Documentation and Submitting a Service Request

Document Change History


Preface


Revised: August 23, 2011, OL-18082-11

This preface describes the objectives, audience, organization, and conventions of this document. It also explains how to find additional information on related Cisco products and services and how to obtain technical assistance, should it be needed. It contains the following sections:

Document Objectives

Audience

Related Documentation

Obtaining Documentation and Submitting a Service Request

Document Change History

Document Objectives

This document describes the information that you will need to create, implement, and deploy dial plans for the Cisco PGW 2200 Softswitch Release 9.8.

The document also contains tables and worksheets for you to use to create dial plans for your system.

Audience

This guide is for network operators and administrators who have experience with telecommunications networks, protocols, and equipment and who have familiarity with data communications networks, protocols, and equipment.

Related Documentation

This document contains information that is related to Cisco PGW 2200 Softswitch dial plans. For additional information on other system-level documents, see the documents at this URL:

http://www.cisco.com/en/US/products/hw/vcallcon/ps2027/tsd_products_support_series_home.html

You can find the Cisco PGW 2200 Softswitch Documentation Map at the following URL:

http://www.cisco.com/en/US/products/hw/vcallcon/ps2027/products_documentation_roadmaps_list.html

Other useful reference publications include

Overviews of the related telephony solutions—Describe the Cisco telephony solutions with which the Cisco PGW 2200 Softswitch node is associated

Provisioning guides for the related telephony solutions—Describe the provisioning steps for the Cisco telephony solutions with which the Cisco PGW 2200 Softswitch node is associated

Solution gateway installation and configuration guides—Describe the steps for installing and configuring the media gateway for a particular Cisco telephony solution

Cisco IP Transfer Point - LinkExtender—Describes the Cisco IP Transfer Point - LinkExtender (Cisco IPT-L, formerly known as the Cisco Signaling Link Terminal or Cisco SLT) and provides configuration information

Obtaining Documentation and Submitting a Service Request

For information on obtaining documentation, submitting a service request, and gathering additional information, see the monthly What's New in Cisco Product Documentation, which also lists all new and revised Cisco technical documentation at

http://www.cisco.com/en/US/docs/general/whatsnew/whatsnew.html

Subscribe to the What's New in Cisco Product Documentation as a Really Simple Syndication (RSS) feed and set content to be delivered directly to your desktop using a reader application. The RSS feeds are a free service and Cisco currently supports RSS version 2.0.

Document Change History

Release Number
Document Number
Change Date
Change Summary

9.8(1)

OL-18082-10

January 20, 2011

Updated Dataword1 values of the A_NUM_NPI_TYPE result type in Chapter 1 "Dial Plan and Routing"

9.8(1)

OL-18082-09

September 7, 2010

Added note in Chapter 3 about the proper sequence to follow for installing the Cisco PGW 2200 Softswitch software prior to migrating a dial plan.

9.8(1)

OL-18082-08

May 13, 2010

Updated parameter descriptions of result type IN_TRIGGER, in Chapter 1.

9.8(1)

OL-18082-07

May 10, 2010

Added the section "AOC Generation for PRI" in Chapter 1.

Added the section"Adding a LINEXLATE Table to the Dial Plan for Configurable NOA Mapping" in Chapter 4.

Added the section "Provisioning Conditional A-Number Digit Modification" in Chapter 4.

Added the section "Provisioning E911 Mapping" in Chapter 4.

Added the sections "Adding the BCMOD Result Type" and "Adding the HLCMOD Result Type" to Chapter 4.

9.8(1)

OL-18082-06

January 22, 2010

Added new and modified result types in Chapter 1 "Dial Plan and Routing," and dial plan provisioning procedures in Chapter 4 "Provisioning Dial Plans with MML."

9.8(1)

OL-18082-05

December 15, 2009

Added the internal cause code, IC_IN_SERVICE_UNAVAILABLE in "Cause and Location Codes."

Removed detailed parameter information in Chapter 4. The detailed parameter information can be found in Cisco PGW 2200 Softswitch Release 9 MML Command Reference.

9.8(1)

OL-18082-04

November 23, 2009

Updated cause analysis description on cause codes and locations in Chapter 1.

Updated Figure 1-3, Pre-analysis Stages.

9.8(1)

OL-18082-03

November 5, 2009

Updated Full Number Translations behavior option enhancement for result type NUM_TRANS, in Chapter 1.

9.8(1)

OL-18082-02

October 19, 2009

Updated cause code and Calling Party Category (CPC) code mapping in Appendix A and B.

Updated the section, Deleting a Component from a Dial Plan, in Chapter 4.

9.8(1)

OL-18082-01

August 26, 2009

Initial release