Getting Started with Cisco Unified Communications Operating System Administration
Use Microsoft Internet Explorer version 6.0 or a later release, or Mozilla Firefox version 3.0 or a later release to access the Cisco Unified Operating System Administration interface. Other browsers are not supported.
•Signing In to Cisco Unified Communications Operating System Administration
•Recovering the Administrator Password
•Creating a Customized Log-on Message
Signing In to Cisco Unified Communications Operating System Administration
Before You Begin
If you are currently signed in to Cisco Unified Presence Administration, sign out before proceeding.
Step 1 Perform the following actions to access Cisco Unified Communications Operating System Administration:
a. Select Navigation > Cisco Unified OS Administration from the menu in the upper, right corner of the Cisco Unified Presence Administration window.
b. Select Go.
Step 2 Enter your Administrator username and password.
Step 3 Select Submit.
•You can also access Cisco Unified Communications Operating System Administration directly by entering the following URL:
•The Administrator username and password are established during installation or created using the command line interface.
Command Line Interface (CLI) Reference Guide for Cisco Unified Presence (on Cisco.com)
Recovering the Administrator Password
If you lose the Administrator password and cannot access the system, you can reset the Administrator password.
Before You Begin
•During this procedure, you will be required to remove and then insert a valid CD or DVD in the disk drive to prove that you have physical access to the system.
•The Administrator signin must start with an alphabetic character, be at least six characters long, and can contain alphanumeric characters, hyphens, and underscores.
Step 1 Sign in to the system with the following username and password:
Step 2 Press any key to continue.
Step 3 If you have a CD or DVD in the disk drive, remove it now.
Step 4 Press any key to continue.
The system tests to ensure that you have removed the CD or DVD from the disk drive.
Step 5 Insert a valid CD or DVD into the disk drive.
Step 6 After the system verifies that you have inserted the disk, you are prompted to enter a new Administrator password.
Step 7 Reenter the new password.
Step 8 After the system verifies the strength of the new password, the password is reset, and you are prompted to press any key to exit the password reset utility.
•If you want to set up a different Administrator password, use the CLI command set password.
•The system checks the new password that you enter for strength. If the password does not contain enough different characters, you are prompted to enter a new password.
Command Line Interface Reference Guide for Cisco Unified Presence (on Cisco.com)
Creating a Customized Log-on Message
You can upload a text file that contains a customized log-on message that appears in each of the Cisco Unified Presence applications administrative interfaces.
Step 1 Sign in to Cisco Unified Communications Operating System Administration.
Step 2 Select Software Upgrades > Customized Logon Message.
Step 3 Select Browse to select the text file you want to upload.
Note Text files are the only supported format and must be smaller than 10KB.
Step 4 Select Upload File.
Step 5 To revert to the default log-on message, select Delete.