Cisco Unified IP Phone 6901 and 6911 Administration Guide for Cisco Unified Communications Manager 10.0 (SCCP and SIP)
Technical Specifications
Downloads: This chapterpdf (PDF - 1.06MB) The complete bookPDF (PDF - 4.49MB) | The complete bookePub (ePub - 1.12MB) | Feedback

Technical Specifications

Technical Specifications

Physical and Operating Environment Specifications

The following sections describe the physical and operating environment specifications for Cisco Unified IP Phone 6901 and Cisco Unified IP Phone 6911.

Physical and Operating Environment Specifications for Cisco Unified IP Phone 6901

The following table shows the physical and operating environment specifications for the Cisco Unified IP Phone 6901.

Table 1 Physical and Operating Environment Specifications for the Cisco Unified IP Phone 6901

Specification

Value or Range

Operating temperature

23° to 113°F (-5° to 45°C)

Operating relative humidity

10% to 90% (non-condensing)

Storage temperature

-13° to 158°F (-25° to 70°C)

Height

8.1 in. (20.5 cm)

Width

3.7 in. (9.4 cm)

Depth

  • 2.12 in. (5.4 cm) - With footstand closed
  • 3.42 in. (8.7 cm) - With footstand open

Weight

  • 1.37 lb (621.2 g) - Black handset phone (Europe)
  • 1.37 lb (662 g) - White handset phone (Europe)
  • 1.44 lb (655.2 g) - Black handset phone (North America)
  • 1.53 lb (695 g) - White handset phone (North America)

Power

  • 100-240 VAC, 50-60 Hz, 0.5 A - When using the AC adapter
  • 48 VDC, 0.2 A - When using the in-line power over the network cable

Cables

Category 3/5/5e for 10-Mbps cables with four pairs

Category 5/5e for 100-Mbps cables with four pairs

Note   

Cables have four pairs of wires for a total of eight conductors.

Distance Requirements

As supported by the Ethernet Specification, it is assumed that the maximum cable length between each Cisco Unified IP Phone and the switch is 100 meters (330 feet).

Physical and Operating Environment Specifications for Cisco Unified IP Phone 6911

The following table shows the physical and operating environment specifications for the Cisco Unified IP Phone 6911.

Table 2 Physical and Operating Environment Specifications for the Cisco Unified IP Phone 6911

Specification

Value or Range

Operating temperature

23° to 113°F (-5° to 45°C)

Operating relative humidity

10% to 90% (non-condensing)

Storage temperature

-13° to 158°F (-25° to 70°C)

Height

8.07 in. (20.5 cm)

Width

7.4 in. (18.8 cm)

Depth

5.76 in. (14.64 cm) - Excluding the handset

Weight

  • 1.53 lb (697 g) - Black handset phone
  • 1.65 lb (750.3 g) - White handset phone

Power

  • 100-240 VAC, 50-60 Hz, 0.5 A - When using the AC adapter
  • 48 VDC, 0.2 A - When using the in-line power over the network cable

Cables

Category 3/5/5e for 10-Mbps cables with 4 pairs

Category 5/5e for 100-Mbps cables with 4 pairs

Note   

Cables have 4 pairs of wires for a total of 8 conductors.

Distance Requirements

As supported by the Ethernet Specification, it is assumed that the maximum cable length between each Cisco Unified IP Phone and the switch is 100 meters (330 feet).

Cable Specifications

  • RJ-9 jack (4-conductor) for handset connection.
  • RJ-45 jack for the LAN 10/100BaseT connection (labeled 10/100 SW on the Cisco Unified IP Phone 6901 and 6911).
  • RJ-45 jack for a second 10/100BaseT compliant connection (labeled 10/100 PC on the Cisco Unified IP Phone  6911).
  • 48-volt power connector.

Network and Access Port Pinouts

Although both the network and access ports are used for network connectivity, they serve different purposes and have different port pinouts.

  • The network port is labeled network on the Cisco Unified IP Phone.
  • The access port is labeled Computer on the Cisco Unified IP Phone (Cisco Unified IP Phone 6911 only).

Network Port Connector

The following table describes the network port connector pinouts.

Table 3 Network Port Connector Pinouts

Pin number

Function

1

BI_DA+

2

BI_DA-

3

BI_DB+

4

BI_DC+

5

BI_DC-

6

BI_DB-

7

BI_DD+

8

BI_DD-

Note   

BI stands for bidirectional, while DA, DB, DC and DD stand for Data A, Data B, Data C and Data D respectively.

Computer Port Connector

The following table describes the computer port connector pinouts.

Table 4 Computer (Access) Port Connector Pinouts

Pin number

Function

1

BI_DB+

2

BI_DB-

3

BI_DA+

4

BI_DD+

5

BI_DD-

6

BI_DA-

7

BI_DC+

8

BI_DC-

Note   

BI stands for bidirectional, while DA, DB, DC and DD stand for Data A, Data B, Data C and Data D respectively.