Cisco Unified Communications Manager Managed Services Guide, Release 8.5(1)
Vendor-Specific Management Information Base
Downloads: This chapterpdf (PDF - 295.0KB) The complete bookPDF (PDF - 7.71MB) | Feedback

Vendor-Specific Management Information Base

Table Of Contents

Vendor-Specific Management Information Base

Vendor-Specific Management Information Base

Supported Servers in Cisco Unified CM Releases

Cisco Unified CM Release 8.5(1)

Inapplicable MIBs in Cisco Unified CM Release 8.5(1)

Cisco Unified CM Release 8.0(2)

Inapplicable MIBs in Cisco Unified CM Release 8.0(2)

Cisco Unified CM Release 8.0(1)

Inapplicable MIBs in Cisco Unified CM Release 8.0(1)

Cisco Unified CM Release 7.1(2)

Inapplicable MIBs in Cisco Unified CM Release 7.1(2)

Cisco Unified CM Release 7.1(1)

Inapplicable MIBs

Cisco Unified CM Release 7.0(1)

Unsupported Servers by MIB

Cisco Unified CM Release 6.1(3)

Unsupported Servers by MIB

Cisco Unified CM Release 6.1

Unsupported Servers by MIB

Cisco Unified CM Release 6.0

Unsupported Servers by MIB

IBM MIBs

IBM Status Messages

Hewlett Packard MIBs

HP Status Messages

Intel MIBs

Intel Status Messages


Vendor-Specific Management Information Base


This chapter describes the vendor-specific Management Information Base (MIB) text documents that Cisco Unified Communications Manager (Cisco Unified CM) supports and that are used with Simple Network Management Protocol (SNMP). The chapter contains the following sections:

Vendor-Specific Management Information Base

Supported Servers in Cisco Unified CM Releases

IBM MIBs

Hewlett Packard MIBs

Intel MIBs

Vendor-Specific Management Information Base

The MIBs described in this chapter exist on various Cisco Media Convergence Servers (MCS), depending on vendor and model number. To query these MIBS, you can use the standard MIB browsers provided by the vendor. Go to the following URLs:

For HP, go to http://h18013.www1.hp.com/products/servers/management/hpsim/index.html to download HP SIM.

For IBM, go to http://www-03.ibm.com/systems/management/director/index.html to download IBM Systems Director.

Supported Servers in Cisco Unified CM Releases

This section lists the supported server models and unsupported server models by MIB and by Cisco Unified CM Release. It contains the following subsections:

Cisco Unified CM Release 8.5(1)

Cisco Unified CM Release 8.0(2)

Cisco Unified CM Release 8.0(1)

Cisco Unified CM Release 7.1(2)

Cisco Unified CM Release 7.1(1)

Cisco Unified CM Release 7.0(1)

Cisco Unified CM Release 6.1(3)

Cisco Unified CM Release 6.1

Cisco Unified CM Release 6.0

Cisco Unified CM Release 8.5(1)

Table 9-1 provides the list of servers available in Cisco Unified CM release 8.5(1).

Table 9-1 Servers Available in Cisco Unified CM Release 8.5(1) 

Cisco Unified CM Release 8.5(1)
IBM Server Models
HP Server Models
Cisco Unified Computing System

MCS-7816-I3-IPC1

MCS-7816-H3-IPC1

UCS B200 M1

MCS-7816-I4-IPC1

MCS-7825-H3-IPC1

UCS C210 M1

MCS-7816-I5-IPC1

MCS-7825-H4-IPC1

MCS-7825-I3-IPC1

MCS-7828-H3-IPC1

MCS-7825-I4-IPC1

MCS-7835-H2-IPC1

MCS-7825-I5-IPC1

MCS-7835-H2-IPC2

MCS-7828-I3-SS1

MCS-7845-H2-IPC1

MCS-7828-I4-SS1

MCS-7845-H2-IPC2

MCS-7828-I5-SS1

DL380G6 SW only

MCS-7835-I2-IPC1

MCS-7835-I2-IPC2

MCS-7835-I3-IPC1

MCS-7845-I2-IPC1

MCS-7845-I2-IPC2

MCS-7845-I3-IPC1


Inapplicable MIBs in Cisco Unified CM Release 8.5(1)

IBM-SYSTEM-POWER MIB does not apply to the following IBM server models:

MCS-7815-I2-IPC1

MCS-7816-I3-IPC1

MCS-7816-I4-IPC1

MCS-7816-I5-IPC1

MCS-7825-I2-IPC1

MCS-7825-I3-IPC1

MCS-7825-I4-IPC1

MCS-7825-I5-IPC1

MCS-7828-I3-SS1

MCS-7828-I4-SS1

MCS-7828-I5-SS1

IBM-SYSTEM-RAID MIB does not apply to the following IBM server models:

MCS-7815-I2-IPC1

MCS-7816-I3-IPC1

MCS-7816-I4-IPC1

MCS-7816-I5-IPC1

MCS-7825-I4-IPC1

MCS-7825-I5-IPC1

MCS-7828-I4-SS1

MCS-7828-I5-SS1

MCS-7835-I3-IPC1

MCS-7845-I3-IPC1

IBM-SYSTEM-STORAGE-MIB does not apply to the following IBM server models:

MCS-7815-I2-IPC1

MCS-7816-I3-IPC1

MCS-7816-I4-IPC1

MCS-7816-I5-IPC1

MCS-7825-I2-IPC1

MCS-7825-I3-IPC1

MCS-7828-I3-SS1

MCS-7835-I2-IPC1

MCS-7835-I2-IPC2

MCS-7845-I2-IPC1

MCS-7845-I2-IPC2

HP CPQSCSI MIB does not apply to the following HP server model:

MCS-7816-H3-IPC1

MCS-7825-H3-IPC1

MCS-7825-H4-IPC1

MCS-7828-H3-IPC1

MCS-7835-H2-IPC1

MCS-7835-H2-IPC2

MCS-7845-H2-IPC1

MCS-7845-H2-IPC2

DL380G6 SW only

Cisco Unified CM Release 8.0(2)

Table 9-2 provides the list of servers available in Cisco Unified CM release 8.0(2).

Table 9-2 Servers Available in Cisco Unified CM Release 8.0(2) 

Cisco Unified CM Release 8.0(2)
IBM Server Models
HP Server Models
Cisco Unified Computing System

MCS-7815-I2-IPC1

MCS-7816-H3-IPC1

UCS B200 M1

MCS-7816-I3-IPC1

MCS-7825-H2-IPC1

MCS-7816-I4-IPC1/CCX1

MCS-7825-H3-IPC1

MCS-7825-I2-IPC1

MCS-7825-H4-IPC1

MCS-7825-I3-IPC1

MCS-7828-H3-IPC1

MCS-7825-I4-IPC1

MCS-7835-H2-IPC1

MCS-7828-I3-SS1

MCS-7835-H2-IPC2

MCS-7828-I4-SS1

DL380G6 (Single E5504 CPU)

MCS-7835-I2-IPC1

MCS-7845-H2-IPC1

MCS-7835-I2-IPC2

MCS-7845-H2-IPC2

MCS-7835-I3-IPC1

DL380G6 (Single E5540 CPU)

MCS-7845-I2-IPC1

MCS-7845-I2-IPC2

MCS-7845-I3-IPC1


Inapplicable MIBs in Cisco Unified CM Release 8.0(2)

IBM-SYSTEM-POWER MIB does not apply to the following IBM server models:

MCS-7815-I2-IPC1

MCS-7816-I3-IPC1

MCS-7816-I4-IPC1/CCX1

MCS-7825-I2-IPC1

MCS-7825-I3-IPC1

MCS-7825-I4-IPC1

MCS-7828-I3-SS1

MCS-7828-I4-SS1

IBM-SYSTEM-RAID MIB does not apply to the following IBM server models:

MCS-7815-I2-IPC1

MCS-7816-I3-IPC1

MCS-7816-I4-IPC1/CCX1

MCS-7825-I4-IPC1

MCS-7828-I4-SS1

MCS-7835-I3-IPC1

MCS-7845-I3-IPC1

IBM-SYSTEM-STORAGE-MIB does not apply to the following IBM server models:

MCS-7815-I2-IPC1

MCS-7816-I3-IPC1

MCS-7816-I4-IPC1/CCX1

MCS-7825-I2-IPC1

MCS-7825-I3-IPC1

MCS-7828-I3-SS1

MCS-7835-I2-IPC1

MCS-7835-I2-IPC2

MCS-7845-I2-IPC1

MCS-7845-I2-IPC2

HP CPQSCSI MIB does not apply to the following HP server model:

MCS-7816-H3-IPC1

MCS-7825-H2-IPC1

MCS-7825-H3-IPC1

MCS-7825-H4-IPC1

MCS-7828-H3-IPC1

MCS-7835-H2-IPC1

MCS-7835-H2-IPC2

DL380G6 (Single E5504 CPU)

MCS-7845-H2-IPC1

MCS-7845-H2-IPC2

DL380G6 (Single E5540 CPU)

Cisco Unified CM Release 8.0(1)

Table 9-3 provides the list of servers available in Cisco Unified CM release 8.0(1).

Table 9-3 Servers Available in Cisco Unified CM Release 8.0(1) 

Cisco Unified CM Release 8.0(1)
IBM Server Models
HP Server Models

MCS-7815-I2-IPC11

MCS-7816-H3-IPC11

MCS-7816-I3-IPC11

MCS-7825-H2-IPC11

MCS-7816-I4-IPC11

MCS-7825-H2-IPC21

MCS-7825-I2-IPC11

MCS-7825-H3-IPC11

MCS-7825-I2-IPC21

MCS-7825-H4-IPC11

MCS-7825-I3-IPC11

MCS-7828-H3

MCS-7825-I4-IPC11

MCS-7835-H2-IPC11

MCS-7828-I3

MCS-7835-H2-IPC21

MCS-7828-I4

MCS-7845-H2-IPC11

MCS-7835-I2-IPC11

MCS-7845-H2-IPC21

MCS-7835-I2-IPC21

MCS-7835-I3-IPC12

MCS-7845-I2-IPC11

MCS-7845-I2-IPC21

MCS-7845-I3-IPC12


1. Supported, but note that Cisco Unified Communications Manager 6.1 and higher requires memory of minimum 2GB for MCS 7815/16/25/35, and 4GB for MCS 7845, and hard drive capacity of 72/80 GB or higher.This will result in mandatory memory and hard drive upgrades, if older supported servers are desired for use with the new software versions.

2. Supported, but note that servers running Cisco Unified Communications Manager (CallManager) 4.0 and later require a minimum of 2 GB of memory for Cisco MCS 7815, MCS 7816, MCS 7825, and MCS 7835 and 4 GB of memory for Cisco MCS 7845.


Note For information about the product end-of-life notices, go to http://www.cisco.com/en/US/products/sw/voicesw/ps556/prod_eol_notices_list.html


Inapplicable MIBs in Cisco Unified CM Release 8.0(1)

IBM-SYSTEM-POWER MIB does not apply to the following IBM server models:

MCS-7815-I1-IPC1

MCS-7815-I2-IPC1

MCS-7815-I3-IPC1

MCS-7816-I3-IPC1

MCS-7816-I4-IPC1

MCS-7825I-3.0-IPC1

MCS-7825-I1-IPC1

MCS-7825-I2-IPC1

MCS-7825-I3-IPC1

MCS-7825-I4-IPC1

MCS-7828-I3-IPC1

IBM-SYSTEM-RAID MIB does not apply to the following IBM server models:

MCS-7815-I1-IPC1

MCS-7815-I2-IPC1

MCS-7815-I3-IPC1

MCS-7816-I3-IPC1

MCS-7816-I4-IPC1

MCS-7825-I4-IPC1

MCS-7828-I4-IPC1

IBM-SYSTEM-STORAGE-MIB does not apply to the following IBM server models:

MCS-7815-I1-IPC1

MCS-7815-I2-IPC1

MCS-7815-I3-IPC1

MCS-7816-I3-IPC1

MCS-7816-I4-IPC1

MCS-7825I-3.0-IPC1

MCS-7825-I1-IPC1

MCS-7825-I2-IPC1

MCS-7825-I3-IPC1

MCS-7828-I3-IPC1

MCS-7835I-3.0-IPC1

MCS-7835-I1-IPC1

MCS-7835-I2-IPC1

MCS-7835-I2-IPC2

MCS-7845I-3.0-IPC1

MCS-7845-I1-IPC1

MCS-7845-I2-IPC1

MCS-7845-I2-IPC2

HP CPQSCSI MIB does not apply to the following HP server model:

MCS-7816-H4-IPC1

MCS-7825H-3.0-IPC1

MCS-7825-H1-IPC1

MCS-7825-H2-IPC1

MCS-7825-H3-IPC1

MCS-7825-H4-IPC1

MCS-7828-H3-IPC1

MCS-7835H-3.0-IPC1

MCS-7835-H1-IPC1

MCS-7835-H2-IPC1

MCS-7835-H2-IPC2

MCS-7845H-3.0-IPC1

MCS-7845-H1-IPC1

MCS-7845-H2-IPC1

MCS-7845-H2-IPC2

HP CPQSM2 MIB does not apply to the following HP server model:

MCS-7825H-3.0-IPC1

Cisco Unified CM Release 7.1(2)

Table 9-4 provides the list of servers available in Cisco Unified CM release 7.1(2).

Table 9-4 Servers Available in Cisco Unified CM Release 7.1(2) 

Cisco Unified CM Release 7.1(2)
IBM Server Models
HP Server Models

MCS-7815-I1-IPC1

MCS-7816-H3-IPC1

MCS-7815-I2-IPC1

MCS-7816-H4-IPC1/CCX1

MCS-7815-I3-IPC1

MCS-7825H-3.0-IPC1

MCS-7816-I3-IPC1

MCS-7825-H1-IPC1

MCS-7816-I4-IPC1/CCX1

MCS-7825-H2-IPC1

MCS-7825I-3.0-IPC1

MCS-7825-H3-IPC1

MCS-7825-I1-IPC1

MCS-7825-H4-IPC1/CCE1/
CCX1/ECS1/RC1

MCS-7825-I2-IPC1

MCS-7828-H3-IPC1

MCS-7825-I3-IPC1

MCS-7835H-3.0-IPC1

MCS-7825-I4-IPC1/CCE1/
CCX1/ECS1/RC1

MCS-7835-H1-IPC1

MCS-7828-I3-IPC1

MCS-7835-H2-IPC1

MCS-7835I-3.0-IPC1

MCS-7835-H2-IPC2/CCE2/
CCX2/RC2/ECS2

MCS-7835-I1-IPC1

MCS-7845H-3.0-IPC1

MCS-7835-I2-IPC1

MCS-7845-H1-IPC1

MCS-7835-I2-IPC2/CCE2/
CCX2/RC2/ECS2

MCS-7845-H2-IPC1

MCS-7845I-3.0-IPC1

MCS-7845-H2-IPC2/CCE2/
CCX2/RC2/ECS

MCS-7845-I1-IPC1

MCS-7845-I2-IPC1

MCS-7845-I2-IPC2/CCE2/
CCX2/RC2/ECS2


Inapplicable MIBs in Cisco Unified CM Release 7.1(2)

IBM-SYSTEM-POWER MIB does not apply to the following IBM server models:

MCS-7815-I1-IPC1

MCS-7815-I2-IPC1

MCS-7815-I3-IPC1

MCS-7816-I3-IPC1

MCS-7816-I4-IPC1/CCX1

MCS-7825I-3.0-IPC1

MCS-7825-I1-IPC1

MCS-7825-I2-IPC1

MCS-7825-I3-IPC1

MCS-7825-I4-IPC1/CCE1/CCX1/ECS1/RC1

MCS-7828-I3-IPC1

IBM-SYSTEM-RAID MIB does not apply to the following IBM server models:

MCS-7815-I1-IPC1

MCS-7815-I2-IPC1

MCS-7815-I3-IPC1

MCS-7816-I3-IPC1

MCS-7816-I4-IPC1/CCX1

HP CPQSM2 MIB does not apply to the following HP server model:

MCS-7825H-3.0-IPC1

Cisco Unified CM Release 7.1(1)

Table 9-5 provides the list of servers available in Cisco Unified CM release 7.1(1).

Table 9-5 Servers Available in Cisco Unified CM Release 7.1(1) 

Cisco Unified CM Release 7.1(1)
IBM Server Models
HP Server Models

MCS-7815-I1-IPC1

MCS-7816-H3-IPC1

MCS-7815-I2-IPC1

MCS-7816-H4-IPC1/CCX1

MCS-7815-I3-IPC1

MCS-7825H-3.0-IPC1

MCS-7816-I3-IPC1

MCS-7825-H1-IPC1

MCS-7816-I4-IPC1/CCX1

MCS-7825-H2-IPC1

MCS-7825I-3.0-IPC1

MCS-7825-H3-IPC1

MCS-7825-I1-IPC1

MCS-7825-H4-IPC1/CCE1/CCX1/ECS1/RC1

MCS-7825-I2-IPC1

MCS-7828-H3-IPC1

MCS-7825-I3-IPC1

MCS-7835H-3.0-IPC1

MCS-7825-I4-IPC1/CCE1/CCX1/ECS1/RC1

MCS-7835-H1-IPC1

MCS-7828-I3-IPC1

MCS-7835-H2-IPC1

MCS-7835I-3.0-IPC1

MCS-7835-H2-IPC2/CCE2/CCX2/RC2/ECS2

MCS-7835-I1-IPC1

MCS-7845H-3.0-IPC1

MCS-7835-I2-IPC1

MCS-7845-H1-IPC1

MCS-7835-I2-IPC2/CCE2/CCX2/RC2/ECS2

MCS-7845-H2-IPC1

MCS-7845I-3.0-IPC1

MCS-7845-H2-IPC2/CCE2/CCX2/RC2/ECS2

MCS-7845-I1-IPC1

MCS-7845-I2-IPC1

MCS-7845-I2-IPC2/CCE2/
CCX2/RC2/ECS2


Inapplicable MIBs

IBM-SYSTEM-POWER MIB does not apply to the following IBM server models:

MCS-7815-I1-IPC1

MCS-7815-I2-IPC1

MCS-7815-I3-IPC1

MCS-7816-I3-IPC1

MCS-7816-I4-IPC1/CCX1

MCS-7825I-3.0-IPC1

MCS-7825-I1-IPC1

MCS-7825-I2-IPC1

MCS-7825-I3-IPC1

MCS-7825-I4-IPC1/CCE1/CCX1/ECS1/RC1

MCS-7828-I3-IPC1

IBM-SYSTEM-RAID MIB does not apply to the following IBM server models:

MCS-7815-I1-IPC1

MCS-7815-I2-IPC1

MCS-7815-I3-IPC1

MCS-7816-I3-IPC1

MCS-7816-I4-IPC1/CCX1

HP CPQSM2 MIB does not apply to the following HP server model:

MCS-7825H-3.0-IPC1

Cisco Unified CM Release 7.0(1)

Table 9-6 provides the list of servers available in Cisco Unified CM release 7.0(1).

Table 9-6 Servers Available in Cisco Unified CM Release 7.0(1) 

Cisco Unified CM Release 7.0(1)
IBM Server Models
HP Server Models

MCS-7815-I1-IPC1

MCS-7816-H3-IPC1

MCS-7815-I2-IPC1

MCS-7825H-3.0-IPC1

MCS-7815-I3-IPC1

MCS-7825-H1-IPC1

MCS-7816-I3-IPC1

MCS-7825-H2-IPC1

MCS-7825I-3.0-IPC1

MCS-7825-H3-IPC1

MCS-7825-I1-IPC1

MCS-7828-H3-IPC1

MCS-7825-I2-IPC1

MCS-7835H-3.0-IPC1

MCS-7825-I3-IPC1

MCS-7835-H1-IPC1

MCS-7828-I3-IPC1

MCS-7835-H2-IPC1

MCS-7835I-3.0-IPC1

MCS-7845H-3.0-IPC1

MCS-7835-I1-IPC1

MCS-7845-H1-IPC1

MCS-7835-I2-IPC1/IPC2

MCS-7845-H2-IPC1

MCS-7845I-3.0-IPC1

MCS-7845-I1-IPC1

MCS-7845-I2-IPC1/IPC2

MCS-7815-I1-IPC1



Note IBM Model MCS-7835I-2.4-EVV1 is discontinued in this release.



Note HP MCS-7825H-2.2-EVV1, MCS-7835H-2.4-EVV1, and MCS-7845H-2.4-EVV1 are discontinued in this release.


Unsupported Servers by MIB

IBM-SYSTEM-POWER MIB does not apply to the following IBM server models:

MCS-7815-I1-IPC1

MCS-7815-I2-IPC1

MCS-7815-I3-IPC1

MCS-7816-I3-IPC1

MCS-7825I-3.0-IPC1

MCS-7825-I1-IPC1

MCS-7825-I2-IPC1

MCS-7825-I3-IPC1

MCS-7828-I3-IPC1

IBM-SYSTEM-RAID MIB does not apply to the following IBM server models:

MCS-7815-I1-IPC1

MCS-7815-I2-IPC1

MCS-7815-I3-IPC1

MCS-7816-I3-IPC1

HP CPQSM2 MIB does not apply to the following HP server model:

MCS-7825H-3.0-IPC1

Cisco Unified CM Release 6.1(3)

Table 9-7 provides the list of servers available in Cisco Unified CM release 6.1(3).

Table 9-7 Servers Available in Cisco Unified CM Release 6.1(3) 

Cisco Unified CM Release 6.1(3)
IBM Server Models
HP Server Models

MCS-7815-I1-IPC1

MCS-7816-H3-IPC1

MCS-7815-I2-IPC1

MCS-7825H-2.2-EVV1

MCS-7815-I3-IPC1

MCS-7825H-3.0-IPC1

MCS-7816-I3-IPC1

MCS-7825-H1-IPC1

MCS-7825I-3.0-IPC1

MCS-7825-H2-IPC1

MCS-7825-I1-IPC1

MCS-7825-H3-IPC1

MCS-7825-I2-IPC1

MCS-7828-H3-IPC1

MCS-7825-I3-IPC1

MCS-7828-H4-BE

MCS-7828-I3-IPC1

MCS-7835H-2.4-EVV1

MCS-7828-I4-BE

MCS-7835H-3.0-IPC1

MCS-7835I-2.4-EVV1

MCS-7835-H1-IPC1

MCS-7835I-3.0-IPC1

MCS-7835-H2-IPC1

MCS-7835-I1-IPC1

MCS-7845H-2.4-EVV1

MCS-7835-I2-IPC1/IPC2

MCS-7845H-3.0-IPC1

MCS-7845I-3.0-IPC1

MCS-7845-H1-IPC1

MCS-7845-I1-IPC1

MCS-7845-H2-IPC1

MCS-7845-I2-IPC1/IPC2


Unsupported Servers by MIB

IBM-SYSTEM-POWER MIB does not apply to the following IBM server models:

MCS-7815-I1-IPC1

MCS-7815-I2-IPC1

MCS-7815-I3-IPC1

MCS-7816-I3-IPC1

MCS-7825I-3.0-IPC1

MCS-7825-I1-IPC1

MCS-7825-I2-IPC1

MCS-7825-I3-IPC1

MCS-7828-I3-IPC1

MCS-7828-I4-BE

IBM-SYSTEM-RAID MIB does not apply to the following IBM server models:

MCS-7815-I1-IPC1

MCS-7815-I2-IPC1

MCS-7815-I3-IPC1

MCS-7816-I3-IPC1

HP CPQSCSI MIB does not apply to the following HP server models:

MCS-7816-H3-IPC1

MCS-7825H-2.2-EVV1

MCS-7825H-3.0-IPC1

MCS-7825-H1-IPC1

MCS-7825-H2-IPC1

MCS-7825-H3-IPC1

MCS-7828-H3-IPC1

MCS-7828-H4-BE

MCS-7835H-2.4-EVV1

MCS-7835H-3.0-IPC1

MCS-7835-H1-IPC1

MCS-7835-H2-IPC1

MCS-7845H-2.4-EVV1

MCS-7845H-3.0-IPC1

MCS-7845-H1-IPC1

MCS-7845-H2-IPC1

HP CPQSM2 MIB does not apply to the following HP server models:

MCS-7825H-2.2-EVV1

MCS-7825H-3.0-IPC1

Cisco Unified CM Release 6.1

Table 9-8 provides the list of servers available in Cisco Unified CM release 6.1.

Table 9-8 Servers Available in Cisco Unified CM Release 6.1 

Cisco Unified CM Release 6.1
IBM Server Models
HP Server Models

MCS-7815-I1-IPC1

MCS-7816-H3-IPC1

MCS-7815-I2-IPC1

MCS-7825H-2.2-EVV1

MCS-7815-I3-IPC1

MCS-7825H-3.0-IPC1

MCS-7816-I3-IPC1

MCS-7825-H1-IPC1

MCS-7825I-3.0-IPC1

MCS-7825-H2-IPC1

MCS-7825-I1-IPC1

MCS-7825-H3-IPC1

MCS-7825-I2-IPC1

MCS-7828-H3-IPC1

MCS-7825-I3-IPC1

MCS-7835H-2.4-EVV1

MCS-7828-I3-IPC1

MCS-7835H-3.0-IPC1

MCS-7835I-2.4-EVV1

MCS-7835-H1-IPC1

MCS-7835I-3.0-IPC1

MCS-7835-H2-IPC1

MCS-7835-I1-IPC1

MCS-7845H-2.4-EVV1

MCS-7835-I2-IPC1/IPC2

MCS-7845H-3.0-IPC1

MCS-7845I-3.0-IPC1

MCS-7845-H1-IPC1

MCS-7845-I1-IPC1

MCS-7845-H2-IPC1

MCS-7845-I2-IPC1/IPC2


Unsupported Servers by MIB

IBM-SYSTEM-POWER MIB does not apply to the following IBM server models:

MCS-7815-I1-IPC1

MCS-7815-I2-IPC1

MCS-7815-I3-IPC1

MCS-7816-I3-IPC1

MCS-7825I-3.0-IPC1

MCS-7825-I1-IPC1

MCS-7825-I2-IPC1

MCS-7825-I3-IPC1

MCS-7828-I3-IPC1

IBM-SYSTEM-RAID MIB does not apply to the following IBM server models:

MCS-7815-I1-IPC1

MCS-7815-I2-IPC1

MCS-7815-I3-IPC1

MCS-7816-I3-IPC1

HP CPQSCSI MIB does not apply to the following HP server models:

MCS-7816-H3-IPC1

MCS-7825H-2.2-EVV1

MCS-7825H-3.0-IPC1

MCS-7825-H1-IPC1

MCS-7825-H2-IPC1

MCS-7825-H3-IPC1

MCS-7828-H3-IPC1

MCS-7828-H4-BE

MCS-7835H-2.4-EVV1

MCS-7835H-3.0-IPC1

MCS-7835-H1-IPC1

MCS-7835-H2-IPC1

MCS-7845H-2.4-EVV1

MCS-7845H-3.0-IPC1

MCS-7845-H1-IPC1

MCS-7845-H2-IPC1

HP CPQSM2 MIB does not apply to the following HP server models:

MCS-7825H-2.2-EVV1

MCS-7825H-3.0-IPC1

Cisco Unified CM Release 6.0

Table 9-9 provides the list of servers available in Cisco Unified CM release 6.0.

Table 9-9 Servers Available in Cisco Unified CM Release 6.0 

Cisco Unified CM Release 6.0
IBM Server Models
HP Server Models
Dell Server Models

MCS-7815-I1-IPC1

MCS-7816-H3-IPC1

PE2950

MCS-7815-I2-IPC1

MCS-7825H-2.2-EVV1

 

MCS-7816-I3-IPC1

MCS-7825H-3.0-IPC1

 

MCS-7825I-3.0-IPC1

MCS-7825-H1-IPC1

 

MCS-7825-I1-IPC1

MCS-7825-H2-IPC1

 

MCS-7825-I2-IPC1

MCS-7825-H3-IPC1

 

MCS-7828-I3-IPC1

MCS-7828-H3-IPC1

 

MCS-7835I-2.4-EVV1

MCS-7835H-2.4-EVV1

 

MCS-7835I-3.0-IPC1

MCS-7835H-3.0-IPC1

 

MCS-7835-I1-IPC1

MCS-7835-H1-IPC1

 

MCS-7835-I2-IPC1

MCS-7835-H2-IPC1

 

MCS-7845I-3.0-IPC1

MCS-7845H-2.4-EVV1

 

MCS-7845-I1-IPC1

MCS-7845H-3.0-IPC1

 

MCS-7845-I2-IPC1

MCS-7845-H1-IPC1

 

MCS-7825-I3-IPC1

MCS-7845-H2-IPC1

 

Unsupported Servers by MIB

IBM-SYSTEM-POWER (UMSPOWER) MIB does not apply to the following IBM server models:

MCS-7815-I1-IPC1

MCS-7815-I2-IPC1

MCS-7816-I3-IPC1

MCS-7825I-3.0-IPC1

MCS-7825-I1-IPC1

MCS-7825-I2-IPC1

MCS-7825-I3-IPC1

MCS-7828-I3-IPC1

IBM-SERVERAID MIB does not apply to the following IBM server models:

MCS-7815-I1-IPC1

MCS-7815-I2-IPC1

MCS-7825I-3.0-IPC1

MCS-7825-I1-IPC1

MCS-7825-I2-IPC1

MCS-7835-I2-IPC1

MCS-7845-I2-IPC1

IBM-SYSTEM-RAID MIB does not apply to the following IBM server models:

MCS-7815-I1-IPC1

MCS-7815-I2-IPC1

MCS-7816-I3-IPC1

HP CPQSCSI MIB does not apply to the following HP server models:

MCS-7816-H3-IPC1

MCS-7825H-2.2-EVV1

MCS-7825H-3.0-IPC1

MCS-7825-H1-IPC1

MCS-7825-H2-IPC1

MCS-7825-H3-IPC1

MCS-7828-H3-IPC1

MCS-7835H-2.4-EVV1

MCS-7835H-3.0-IPC1

MCS-7835-H1-IPC1

MCS-7835-H2-IPC1

MCS-7845H-2.4-EVV1

MCS-7845H-3.0-IPC1

MCS-7845-H1-IPC1

MCS-7845-H2-IPC1

HP CPQSM2 MIB does not apply to the following HP server models:

MCS-7825H-2.2-EVV1

MCS-7825H-3.0-IPC1

IBM MIBs

Table 9-10 provides the list of IBM MIBs.

Table 9-10 IBM MIBs 

MIB
OID
Function
Supported for browsing only

IBM-SYSTEM-HEALTH-MIB

1.3.6.1.4.1.2.6.159.1.1.30

Provides temperature, voltage, and fan status

IBM-SYSTEM-ASSETID-MIB

1.3.6.1.4.1.2.6.159.1.1.60

Provides hardware component asset data

IBM-SYSTEM-LMSENSOR-MIB

1.3.6.1.4.1.2.6.159.1.1.80

Provides temperature, voltage, and fan details

IBM-SYSTEM-NETWORK-MIB

1.3.6.1.4.1.2.6.159.1.1.110

Provides Network Interface Card (NIC) status

IBM-SYSTEM-MEMORY-MIB

1.3.6.1.4.1.2.6.159.1.1.120

Provides physical memory details

IBM-SYSTEM-POWER-MIB

1.3.6.1.4.1.2.6.159.1.1.130

Provides power supply details

IBM-SYSTEM-PROCESSOR-MIB

1.3.6.1.4.1.2.6.159.1.1.140

Provides CPU asset/status data

Supported for system traps

IBM-SYSTEM-TRAP

1.3.6.1.4.1.2.6.159.1.1.0

Provides temperature, voltage, fan, disk, NIC, memory, power supply, and CPU details

IBM-SERVERAID-MIB

1.3.6.1.4.1.2.6.167.2

Provides RAID status

IBM-SYSTEM-RAID-MIB

1.3.6.1.4.1.2.6.159.1.1.200.1

Provides RAID status

IBM-SYSTEM-STORAGE-MIB

1.3.6.1.4.1.2.6.159.3.1

Provides RAID status


IBM Status Messages

Table 9-11 provides the IBM hardware status messages.

Table 9-11 IBM Hardware Status Messages, MIBs and Objects Names, and Object Responses 

Cisco Unified CM Release 6.x
MCS-78xx Status
MIBS and Object Names
Object Responses

System Fan

IBM-SYSTEM-LMSENSOR-MIB::ibmSystem
TachometerStatus (also see ibmSystemTachometerKeyIndex)

This is a string indicating the current status of the object. Various operational and non-operational statuses can be defined.

Operational statuses are OK, Degraded and Pred Fail. Pred Fail indicates that an element may be functioning properly but predicting a failure in the near future. An example is a SMART-enabled hard drive.

   

Non-operational statuses are Error, Starting, Stopping and Service. Service can apply during mirror-resilvering of a disk, reload of a user permissions list, or other administrative work.

   

Not all such work is on-line, yet the managed element is neither OK nor in one of the other states.

OK = Normal; Error = Critical

Voltage Sensor

IBM-SYSTEM-LMSENSOR-MIB::ibmSystem
VoltageSensorStatus (also see ibmSystemVoltageSensorKeyIndex)

This is a string indicating the current status of the object. Various operational and non-operational statuses can be defined.

Operational statuses are OK, Degraded and Pred Fail. Pred Fail indicates that an element may be functioning properly but predicting a failure in the near future. An example is a SMART-enabled hard drive.

Non-operational statuses are Error, Starting, Stopping and Service. Service can apply during mirror-resilvering of a disk, reload of a user permissions list, or other administrative work. Not all such work is on-line, yet the managed element is neither OK nor in one of the other states.

OK = Normal; Error = Critical

Thermal

IBM-SYSTEM-LMSENSOR-MIB::ibmSystemTemperatureSensorStatus (also see ibmSystemTemperatureSensorKeyIndex)

The Status property is a string indicating the current status of the object. Various operational and non-operational statuses can be defined. Operational statuses are OK, Degraded and Pred Fail. Pred Fail indicates that an element may be functioning properly but predicting a failure in the near future. An example is a SMART-enabled hard drive. Non-operational statuses can also be specified. These are Error, Starting, Stopping and Service. The latter, Service, could apply during mirror-resilvering of a disk, reload of a user permissions list, or other administrative work. Not all such work is on-line, yet the managed element is neither OK nor in one of the other states. OK = Normal; Error = Critical

Network Interface Card

IBM-SYSTEM-NETWORK-MIB::ibmSystemLogicalNetworkAdapterStatus (also see ibmSystemLogicalNetworkAdapterKeyIndex)

The online status of the adapter.

Logical Drive

IBM-SYSTEM-TRAP-MIB::ibmSystemRaidLogicalDriveStatus (also see ibmSystemRaidLogicalDriveKeyIndex)

The status of the logical drive

Physical Drive

IBM-SYSTEM-TRAP-MIB::ibmSystemRaidDiskDriveStatus & ibmSystemRaidControllerStatus (also see ibmSystemRaidDiskDriveKeyIndex & ibmSystemRaidControllerKeyIndex)

 

Hewlett Packard MIBs

Table 9-12 provides the list of Hewlett Packard MIBs.

Table 9-12 HP MIBs 

MIB
OID
Function
Supported for browsing and system traps

CPQSTDEQ-MIB

1.3.6.1.4.1.232.1

Provides hardware component configuration data

CPQSINFO-MIB

1.3.6.1.4.1.232.2

Provides hardware component asset data

CPQIDA-MIB

1.3.6.1.4.1.232.3

Provides RAID status/events

CPQHLTH-MIB

1.3.6.1.4.1.232.6

Provides hardware components status/events

CPQSTSYS-MIB

1.3.6.1.4.1.232.8

Provides storage (disk) systems status/events

CPQSM2-MIB

1.3.6.1.4.1.232.9

Provides iLO status/events

CPQTHRSH-MIB

1.3.6.1.4.1.232.10

Provides alarm threshold management

CPQHOST-MIB

1.3.6.1.4.1.232.11

Provides operating system information

CPQIDE-MIB

1.3.6.1.4.1.232.14

Provides IDE (CD-ROM) drive status/events

CPQNIC-MIB

1.3.6.1.4.1.232.18

Provides Network Interface Card (NIC) status/events


HP Status Messages

Table 9-13 lists status messages, MIBs and OIDs, MIB object names and clearing values, and object responses.

Table 9-13 HP Hardware Status Messages, MIBs and OIDs, MIB Object Names and Clearing Values, and
Object Responses 

Cisco Unified CM Release 6.x
MCS-78xx Status
MIB and OID
MIB Object Name and Clearing Value
Object Response

Logical Drive1

CPQIDA-MIB
1.3.6.1.4.1.232.3.2.3.1.1.4

cpqDaLogDrvStatus

Clearing Value = 2

The logical drive can be in one of the following states:

Ok (2) Indicates that the logical drive is in normal operation mode.

Failed (3) Indicates that more physical drives have failed than the fault tolerance mode of the logical drive can handle without data loss.

Unconfigured (4) Indicates that the logical drive is not configured.

Recovering (5) Indicates that the logical drive is using Interim Recovery Mode. In Interim Recovery Mode, at least one physical drive has failed, but the logical drive's fault tolerance mode lets the drive continue to operate with no data loss.

     

Ready Rebuild (6) Indicates that the logical drive is ready for Automatic Data Recovery. The physical drive that failed has been replaced, but the logical drive is still operating in Interim Recovery Mode.

     

Rebuilding (7) Indicates that the logical drive is currently doing Automatic Data Recovery. During Automatic Data Recovery, fault tolerance algorithms restore data to the replacement drive.

Wrong Drive (8) Indicates that the wrong physical drive was replaced after a physical drive failure.

Bad Connect (9) Indicates that a physical drive is not responding.

Physical Drive1

CPQIDA-MIB
1.3.6.1.4.1.232.3.2.5.1.1.6

cpqDaPhyDrvStatus

Clearing Value = 2

The following values are valid for the physical drive status:

other (1) Indicates that the instrument agent does not recognize the drive. You may need to upgrade your instrument agent and/or driver software.

ok (2) Indicates the drive is functioning properly.

failed (3) Indicates that the drive is no longer operating and should be replaced.

predictiveFailure(4) Indicates that the drive has a predictive failure error and should be replaced.

System Fan

CPQHLTH-MIB
1.3.6.1.4.1.232.6.2.6.4

cpqHeThermalSystem
FanStatus

Clearing Value = 2

This value will be one of the following:

other(1) Fan status detection is not supported by this system or driver.

ok(2) The fan is operating properly.

degraded(2) A redundant fan is not operating properly.

failed(4) A non-redundant fan is not operating properly.

CPU Fan

CPQHLTH-MIB
1.3.6.1.4.1.232.6.2.6.5

cpqHeThermalCpuFan
Status

Clearing Value = 2

This value will be one of the following:

other(1) Fan status detection is not supported by this system or driver.

ok(2) The fan is operating properly.

degraded(2) A redundant fan is not operating properly.

failed(4) A non-redundant fan is not operating properly.

Network Interface Card (NIC)

CPQNIC-MIB
1.3.6.1.4.1.232.18.2.3.1.1.13

cpqNicIfPhysAdapter
State

Clearing Value = 2 and 3

The following values are valid—

unknown(1) The instrument agent was not able to determine the status of the adapter. The instrument agent may need to be upgraded.

ok(2) The physical adapter is operating properly.

generalFailure(3) The physical adapter has failed.

linkFailure(4) The physical adapter has lost link. Check the cable connections to this adapter.

Thermal

CPQHLTH-MIB
1.3.6.1.4.1.232.6.2.6.1

cpqHeThermalCondition

Clearing Value = 2

This value will be one of the following:

other(1) Temperature could not be determined.

ok(2) The temperature sensor is within normal operating range.

degraded(3) The temperature sensor is outside of normal operating range.

failed(4) The temperature sensor detects a condition that could permanently damage the system.

Note The system automatically shuts down if the failed (4) condition occurs, so it is unlikely that 4 will ever be returned by the agent. If the cpqHeThermalDegradedAction is set to shut down (3), the system will shut down if the condition occurs.

Power Supply1

CPQHLTH-MIB
1.3.6.1.4.1.232.6.2.9.3.1.5

cpqHeFltTolPower
SupplyStatus

Clearing Value = 1

This value will be one of the following:

other(1) The status could not be determined or not present.

ok(2) The power supply is operating normally.

degraded(3) A temperature sensor, fan or other power supply component is outside of normal operating range.

failed(4) A power supply component detects a condition that could permanently damage the system.

NIC Errors

CPQNIC-MIB
1.3.6.1.4.1.232.18.2.3.1.1.16

cpqNicIfPhysAdapter
GoodTransmits

Clearing Value = <0.5% for 1 hour

Interface is experiencing excessive errors

 

1.3.6.1.4.1.232.18.2.3.1.1.18

cpqNicIfPhysAdapter
BadTransmits

 
 

1.3.6.1.4.1.232.18.2.3.1.1.17

cpqNicIfPhysAdapter
GoodReceives

 
 

1.3.6.1.4.1.232.18.2.3.1.1.19

cpqNicIfPhysAdapter
BadReceives

 

NIC Utilization

CPQNIC-MIB
1.3.6.1.4.1.232.18.2.3.1.1.16

cpqNicIfPhysAdapter
GoodTransmits

Clearing Value = <50% for 1 hour

Interface is experiencing High Utilization

1.3.6.1.4.1.232.18.2.3.1.1.18

cpqNicIfPhysAdapter
BadTransmits

1.3.6.1.4.1.232.18.2.3.1.1.17

cpqNicIfPhysAdapter
GoodReceives

1.3.6.1.4.1.232.18.2.3.1.1.19

cpqNicIfPhysAdapter
BadReceives

Memory Module Trap

1.3.6.1.4.1.232.6.3

cpqHe4CorrMem
ReplaceMemModule

See CPQHOST-MIB for information on the following trap variables:

sysName

cpqHoTrapFlags

cpqHeResMemBoardIndex

cpqHeResMemModule
Index

cpqHeResMemModule
SparePartNo

cpqSiMemModuleSize

cpqSiServerSystemId

Trap number is 6056 which replaces 6029.

A correctable memory log entry indicates a memory module needs to be replaced. The errors have been corrected, but the memory module should be replaced. The error information is reported in the variable cpqHeCorrMemErrDesc

78x5-H Insite Manager Service

HOST-RESOURCES-MIB
1.3.6.1.2.1.25.4.2.1.2

cmaeventd

Compaq Insite Manager Service Failure

   

cmafcad

 
   

cmahealthd

 
   

cmahostd

 
   

Positive String ID forcmaidad

 
   

cmaided

 
   

cmanicd

 
   

cmapeerd

 
   

cmaperfd

 
   

cmasm2d

 
   

cmastdeqd

 
   

cmathreshd

 

1 Unavailable for MCS-7825H


Intel MIBs

Table 9-14 lists Intel MIBs, OID, and functions. See "Intel Status Messages" section for descriptions of messages.

Table 9-14 Intel MIBs 

MIB
OID
Function
Supported for browsing and system traps

INTEL-SERVER-BASEBOARD6

1.3.6.1.4.1.343.2.10.3.6.200

Denotes the power group and describes voltage probes, status, and readings

1.3.6.1.4.1.343.2.10.3.6.300

Denotes the thermal group and describes cooling devices, fans, and temperature probes

1.3.6.1.4.1.343.2.10.3.6.10

Denotes the instances of cooling devices

1.3.6.1.4.1.343.2.10.3.6.20

Denotes the status, reading, and threshold for every cooling device and fan

1.3.6.1.4.1.343.2.10.3.6.30

Denotes the instances of temperature probes

1.3.6.1.4.1.343.2.10.3.6.40

Denotes the status, reading, thresholds for every temperature probe

1.3.6.1.4.1.343.2.10.3.6.1000

Denotes the events group and describes power, thermal, and system events


Intel Status Messages

Table 9-15 lists status messages, MIBs and OIDs, MIB object names and clearing values, and object responses.

Table 9-15 Intel Hardware Status Messages, MIBs and Objects Names, and Object Responses 

Cisco Unified CM Release 7.x
MCS-78xx Status
MIBS and Object Names
Object Responses

Power

INTEL-SERVER-BASEBOARD6::powerEvents

 

System

INTEL-SERVER-BASEBOARD6::systemEvents

 

Thermal

INTEL-SERVER-BASEBOARD6::thermalEvents