Cisco Unified JTAPI Developers Guide for Cisco Unified Communications Manager Release 8.5(1)
New and Changed Information
Downloads: This chapterpdf (PDF - 133.0KB) The complete bookPDF (PDF - 12.68MB) | Feedback

New and Changed Information

Table Of Contents

New and Changed Information

Cisco Unified Communications Manager Release 8.5(1)

Features Supported in Previous Releases

Cisco Unified Communications Manager Release 8.0(1)

Cisco Unified Communications Manager Release 7.1(3)

Cisco Unified Communications Manager Release 7.1(2)

Cisco Unified Communications Manager Release 7.0(1)

Cisco Unified Communications Manager Release 6.1

Cisco Unified Communications Manager Release 6.0

Cisco Unified Communications Manager Release 5.1

Cisco Unified Communications Manager Release 5.0


New and Changed Information


This chapter describes new and changed JTAPI information for Cisco Unified Communications Manager, release 8.5(1) and features supported in the previous releases. It contains the following sections:

Cisco Unified Communications Manager Release 8.5(1)

Features Supported in Previous Releases

For more information, go to the Programming Guides website at http://www.cisco.com/en/US/products/sw/voicesw/ps556/products_programming_reference_guides_list.html.

Cisco Unified Communications Manager Release 8.5(1)

This section describes the new and changed features in Cisco Unified Communications Manager Release 8.5(1):

Agent Greeting—Enables Cisco JTAPI to instruct the Cisco Unified Communications Manager to automatically play a pre-recorded announcement following a successful media connection to the agent device. For more information, see "Agent Greeting" section on page 3-1.

API for Exposing Built-In-Bridge (BIB) Status—Enables Cisco JTAPI to determine if the built-in-bridge capability is enabled on the terminal or not. For more information, see "API for Exposing Built-In-Bridge Status" section on page 3-3.

Play Zip Tone—Allows Cisco JTAPI to play zip tones on active calls. For more information, see "Play Zip Tone" section on page 3-82.

Single Sign-On—Allows Cisco JTAPI to use a single sign-on ticket to authenticate instead of a user ID and password. For more information, see "Single Sign-On" section on page 3-110.

SIP Trunk Early Offer—Allows the SIP trunk to support early offer outbound calls without using the Media Termination Point (MTP). For more information, see "Support for VMware" section on page 3-124.

Unrestricted Unified CM—Provides support for unrestricted Cisco Unified Communications Manager. For more information, see "Support for VMware" section on page 3-124.

Features Supported in Previous Releases

This section describes the features supported in the releases prior to 8.5(1) and contains the following sections:

Cisco Unified Communications Manager Release 8.0(1)

Cisco Unified Communications Manager Release 7.1(3)

Cisco Unified Communications Manager Release 7.1(2)

Cisco Unified Communications Manager Release 7.0(1)

Cisco Unified Communications Manager Release 6.1

Cisco Unified Communications Manager Release 6.0

Cisco Unified Communications Manager Release 5.1

Cisco Unified Communications Manager Release 5.0

Cisco Unified Communications Manager Release 8.0(1)

This section describes the new and changed features in Cisco Unified Communications Manager Release 8.0(1):

Call Control Discovery, page 3-8

Call Pickup, page 3-9

CallFwdAll Key Press Notification, page 3-13

End to End Call Tracing, page 3-45

Extension Mobility Cross Cluster, page 3-46

External Call Control, page 3-47

Hunt List, page 3-53

iSac Codec, page 3-58

Secured Monitoring and Recording, page 3-105

Support for Cisco Unified IP Phone 6901, page 3-122

Support for 100+ Directory Numbers, page 3-124

Support for VMware, page 3-124

Verification Involving PSTN Reachability, page 3-145

Cisco Unified Communications Manager Release 7.1(3)

This section describes the new and changed features in Cisco Unified Communications Manager Release 7.1(3):

Terminal and Address Capability Settings, page 3-127.

Cisco Unified Communications Manager Release 7.1(2)

This section describes the new and changed features in Cisco Unified Communications Manager Release 7.1(2):

Component Updater, page 3-26

Direct Transfer Across Lines, page 3-35

Drop Any Party, page 3-43

IPv6 Support, page 3-57

Join Across Lines or Connected Conference Across Lines, page 3-60

Logical Partitioning, page 3-68

Message Waiting Indicator Enhancement, page 3-71

Park Monitoring and Assisted DPark Support, page 3-76

Interface Changes, page 3-123

Swap or Cancel and Transfer or Conference Behavior, page 3-125

Cisco Unified Communications Manager Release 7.0(1)

This section describes the new and changed features in Cisco Unified Communications Manager from Release 6.1 to Release 7.0(1) and Cisco Unified JTAPI enhancements. It has the following sections:

Call Pickup, page 3-9

Calling Party Normalization, page 3-12

Click to Conference, page 3-24

Do Not Disturb-Reject, page 3-42

Extension Mobility Username Login, page 3-47

Java Socket Connect Timeout, page 3-58

Join Across Lines with Conference Enhancements (SCCP and SIP), page 3-64

Locale Infrastructure Development, page 3-67

selectRoute() with Calling Search Space and Feature Priority, page 3-107


Note Cisco Unified Communications Manager Release 7.0(1) does not support the following IPv6 related methods:

canSupportIPv6()
setProviderOpenRetryAttempts (int retryAttempts)
getProviderOpenRetryAttempts()
getIPAddressingMode() (available on CiscoMediaTerminal and CiscoRouteTerminal interfaces)
register(java.net.InetAddress address, int port, CiscoMediaCapability [] capabilities, int[] algorithmIDs, java.net.InetAddress address_v6, int activeAddressingMode)
register(CiscoMediaCapability [] capabilities, int[] int registration Type, int[] algorithmIDs, int activeAddressingMode)
getTerminals() (available on new interface CiscoProviderTermCapabilityChangedEv)
getAddressingModeForMedia()
getCallingPartyIpAddr_v6() (available on CiscoCallCtlConnOfferedEv and CiscoRouteEvent interfaces)
CTIERR_IPADDRMODEMISMATCH
CTIERR_DYNREG_IPADDRMODE_MISMATCH
hasIPv6CapabilityChanged()
CiscoTerminal.IP_ADDRESSING_MODE_IPv4
CiscoTerminal.IP_ADDRESSING_MODE_IPv6
CiscoTerminal.IP_ADDRESSING_MODE_IPv4_v6
CiscoTerminal.IP_ADDRESSING_MODE_Unknown
CiscoTermRegistrationFailedEv.IP_ADDRESSING_MODE_MISMATCH



Note For the features, Join Across Lines, Do Not Disturb-Reject, and Calling Party Normalization, each Cisco JTAPI must be upgraded to a version that supports these features. Additionally, if you are upgrading from Release 5.1 and you use Join Across Lines, the Conference Chaining feature must not be enabled or used until all applications are either upgraded to a version compatible with the new unified CM version. Also, you should verify that the applications are not impacted by the Conference Chaining feature.


Cisco Unified Communications Manager Release 6.1

This section describes the new and changed features in Cisco Unified Communications Manager from Release 6.0 to Release 6.1 and Cisco Unified JTAPI enhancements. It has the following sections:

Certificate Download API Enhancement, page 3-13

Intercom Support for Extension Mobility, page 3-56

Join Across Lines, page 3-59

Cisco Unified Communications Manager Release 6.0

This section describes the new and changed features in Cisco Unified Communications Manager, Release 6.0 and Cisco Unified JTAPI enhancements. It has the following sections:

Arabic and Hebrew Language Support, page 3-3

Calling Party IP Address, page 3-11

CiscoRTPHandle Interface on Cisco RTP Events, page 3-21

Cisco Unified IP 7931G Phone Interaction, page 3-20

Conference Chaining, page 3-31

Directed Call Park, page 3-39

Do Not Disturb, page 3-40

Forwarding on No Bandwidth and Unregistered DN, page 3-50

Hold Reversion, page 3-53

Intercom, page 3-54

Multilevel Precedence and Preemption Support, page 3-74

Noncontroller Adding of Parties to Conferences, page 3-75

Recording and Silent Monitoring, page 3-88

Secure Conferencing, page 3-97

Translation Pattern Support, page 3-135

Version Format Change, page 3-145

Voice MailBox Support, page 3-146

Cisco Unified Communications Manager Release 5.1

This section describes the new and changed features in Cisco Unified Communications Manager, from Release 5.0 to Release 5.1 and Cisco Unified JTAPI enhancements. It has the following sections:

Call Forward Override, page 3-9

Join Across Lines (Only SCCP), page 3-59

New Error Code in CiscoTermRegistrationFailedEv, page 3-75

Star (*) 50 Update, page 3-119

Cisco Unified Communications Manager Release 5.0

This section describes the new and changed features in Cisco Unified Communications Manager, from Release 4.x to Release 5.0 and Cisco Unified JTAPI enhancements. It has the following:

Auto Updater for Linux, page 3-3

Call Select Status, page 3-10

Command Line Invocation, page 3-26

Hairpin Support, page 3-51

Half-Duplex Media Support, page 3-52

JRE 1.2 and JRE 1.3 Support Removal, page 3-65

JTAPI Client Installer, page 3-65

JTAPI Version Information, page 3-66

Linux, Windows, and Solaris Installation, page 3-66

Network Alerting, page 3-74

Partition Support, page 3-78

QoS Support, page 3-85

Secure Real-Time Protocol Key Material, page 3-98

Silent Install, page 3-110

SIP 3XX Redirection, page 3-112

SIP REFER or REPLACE, page 3-115

SIP Phone Support, page 3-113

Superprovider and Change Notification, page 3-120

Terminal and Address Restrictions, page 3-128

Transport Layer Security (TLS), page 3-136

Unicode Support, page 3-142