Command Line Interface Guide for Cisco Unified Communications Solutions, Release 9.0(1)
License Commands
Downloads: This chapterpdf (PDF - 1.11MB) The complete bookPDF (PDF - 3.86MB) | Feedback

License Commands

License Commands

license file

This command asks to select a license file from a list.

license file { diagnose | get }

Syntax Description

Parameters Description
diagnose

Prints diagnostic information of the selected file.

get

Creates a TAR file of the license file(s) on the system and transfers the TAR file to a remote area.

Command Modes

Administrator (admin:)

Requirements

Command privilege level: 1

Allowed during upgrade: Yes

Applies to: Enterprise License Manager, Cisco Prime License Manager

license management

license management change user

This command takes parameters interactively and changes the username or password of the administrator.

license management change user { name | password }

Syntax Description

Parameters Description
name

Specifies the administrator username.

password

Specifies the administrator password.

Note   

The password must be at least six characters long, and can contain any combination of alphanumeric characters or the following special characters: underscore (_), exclamation mark (!), at sign (@), pound sign (#), dollar sign ($), percentage sign (%), caret (^), and ampersand (&).

Command Modes

Administrator (admin:)

Requirements

Command privilege level: 1

Allowed during upgrade: Yes

Applies to: Enterprise License Manager, Cisco Prime License Manager

license management list users

This command lists the administrative users.

license management list users

Command Modes

Administrator (admin:)

Requirements

Command privilege level: 1

Allowed during upgrade: Yes

Applies to: Enterprise License Manager, Cisco Prime License Manager

license management product re-register all

This command forces re-registration of all product instances associated with this Enterprise License Manager/Cisco Prime License Manager server. This command may take some time for re-registration and synchronization with all product instances to complete.

license management product re-register all

Command Modes

Administrator (admin:)

Requirements

Command privilege level: 1

Allowed during upgrade: Yes

Applies to: Enterprise License Manager, Cisco Prime License Manager

license management reset

This command resets the identity, store data, and essentially removes all the installed licenses. It also restarts the Cisco Prime License Manager server process to make the changes effective.

license management reset { identity | registration }

Syntax Description

Parameters Description
identity

Resets the identity

registration

Resets the registration

Command Modes

Administrator (admin:)

Requirements

Command privilege level: 1

Allowed during upgrade: Yes

Applies to: Enterprise License Manager, Cisco Prime License Manager

license management service

This command activates or deactivates a given service on the Cisco Prime License Manager server.

license management service { activate | deactivate }

Syntax Description

Parameters Description
activate

Activates a given service on the Cisco Prime License Manager server.

deactivate

Deactivates a given service on the Cisco Prime License Manager server.

Command Modes

Administrator (admin:)

Requirements

Command privilege level: 1

Allowed during upgrade: Yes

Applies to: Enterprise License Manager, Cisco Prime License Manager

license management show system

This command lists the administrative users.

license management show system

Command Modes

Administrator (admin:)

Requirements

Command privilege level: 1

Allowed during upgrade: Yes

Applies to: Enterprise License Manager, Cisco Prime License Manager