Command Line Interface Guide for Cisco Unified Communications Solutions, Release 9.0(1)
Delete Commands
Downloads: This chapterpdf (PDF - 1.23MB) The complete bookPDF (PDF - 3.85MB) | Feedback

Delete Commands

Delete Commands

delete account

This command allows you to delete an administrator account.

delete account account-name

Syntax Description

Parameters Description
account-name

Specifies the name of an administrator account.

Command Modes

Administrator (admin:)

Requirements

Command privilege level: 4

Allowed during upgrade: No

delete cuc futuredelivery

This command deletes all messages that have been marked for future delivery.

delete cuc futuredelivery

Command Modes

Administrator (admin:)

Requirements

Command privilege level: 1

Allowed during upgrade: Yes

Example

The following example deletes two messages that have been marked for future delivery.

admin: delete cuc futuredelivery

Deleting File : UmssMtaFutureDelivery/UnityMbxDb1/5C56C086-E64B-11DC-9BAF-41FC55D89593.eml

Deleting File : UmssMtaFutureDelivery/UnityMbxDb1/6D7DD796-E64B-11DC-A0E6-D1FD55D89593.eml

Files : Found = 2, Deleted = 2


Note: Files that are in use cannot be deleted

 

delete cuc locale

This command deletes the specified locale and all of the associated files and settings from Connection.

delete cuc locale locale-id

Syntax Description

Parameters Description
locale-id

Specifies the ID of the locale that you want to delete.

Command Modes

Administrator (admin:)

Usage Guidelines

Before you run this command, you must stop the Connection Conversation Manager and Connection Mixer services. After you run this command, you must restart the Connection Conversation Manager and Connection Mixer services.

Requirements

Command privilege level: 1

Allowed during upgrade: Yes

Example

The following example deletes the en-GB locale and all of the associated files and settings.

admin:delete cuc locale en-GB


en-GB uninstalled

 

delete dns

This command allows you to delete the IP address for a DNS server.

delete dns addr

Syntax Description

Parameters Description
addr

Represents the IP address of the DNS server that you want to delete.

Command Modes

Administrator (admin:)

Usage Guidelines

After you execute this command, the system asks whether you want to continue.


Caution


If you continue, this command causes a temporary loss of network connectivity.


Requirements

Command privilege level: 1

Allowed during upgrade: No

delete dscp

This command deletes a DSCP port tag.

delete dscp port-tag

Syntax Description

Parameters Description
port-tag

Represents a DSCP port tag, which is a string that is mapped to a TCP or UDP port to identify the application that uses the port. This value is for the portTag field displayed when you use the command show dscp defaults. The set of port tags is predefined.

Command Modes

Administrator (admin:)

Usage Guidelines

After you delete an enabled port tag, DSCP marking on that port tag stops. You can recreate a deleted port tag when you use the set dscp marking command; enter the name of the port tag that you previously deleted.


Tip


Use the command show dscp defaults to list the configured port tags.

Requirements

delete ipsec policy_group

This command deletes all policies within the specified group or all groups.

delete ipsec policy_group { group | | all }

Syntax Description

Parameters Description
group

Represents a specific group name.

all

Deletes all groups.

Command Modes

Administrator (admin:)

Requirements

Command privilege level: 1

Allowed during upgrade: No

delete ipsec policy_name

This command deletes an Ipsec policy with given policy name.

delete ipsec policy_name { policy_name | all }

Syntax Description

Parameters Description
policy_name

Represents the policy name.

all

Deletes policies within all policy names.

Command Modes

Administrator (admin:)

Requirements

Command privilege level: 1

Allowed during upgrade: No

delete process

This command allows you to delete a particular process.

delete process process-id [ force | terminate | crash ]

Syntax Description

Parameters Description
process-id

Represents the process ID number.

force

Causes the process to stop.

terminate

Causes the operating system to terminate the process.

crash

Crashes the process and produces a crash dump.

Command Modes

Administrator (admin:)

Usage Guidelines

Use the force option only if the command alone does not delete the process; use the terminate option only if force does not delete the process.

Requirements

Command privilege level: 1

Allowed during upgrade: Yes

delete smtp

This command allows you to delete the SMTP host.

delete smtp

Command Modes

Administrator (admin:)

Requirements

Command privilege level: 1

Allowed during upgrade: No