PIMG Integration Guide for Cisco Unity Connection Release 8.x
Index
Downloads: This chapterpdf (PDF - 127.0KB) The complete bookPDF (PDF - 9.55MB) | Feedback

Index

Table Of Contents

A - C - D - E - F - M - N - O - P - R - S - T - V -

Index

A

Allow TRAP Connections (port setting) 2-2

analog (DTMF) integration

connections 1-3

description 1-3

Answer Calls (port setting) 2-2

application note

Ericsson MD-110 B-1

Nortel SL-100 C-1

Avaya Definity G3

creating a new integration 3-19

phone system programming instructions 3-3

PIMG unit setup instructions 3-5

requirements 3-2

task list, creating an integration 3-1

Avaya Definity ProLogix

creating a new integration 4-19

phone system programming instructions 4-3

PIMG unit setup instructions 4-5

requirements 4-2

task list, creating an integration 4-1

Avaya S8300/S8500/S8700

creating a new integration 5-19

phone system programming instructions 5-3

PIMG unit setup instructions 5-5

requirements 5-2

task list, creating an integration 5-1

C

call information 1-4

connections

analog voice lines to secondary master PIMG unit A-1

required for digital integration 1-2

required for DTMF (analog) integration 1-3

required for serial (SMDI, MCI, or MD-110) integration 1-3

serial cables to secondary master PIMG unit A-4

D

digital integration

connections 1-2

description 1-2

DTMF (analog) integration

connections 1-3

description 1-3

E

Enabled (port setting) 2-1

Extension (port setting) 2-1

F

features provided by integration 1-4

firmware version 5.x, PIMG settings D-1

forwarded calls, information sent by phone system 1-4

M

master PIMG unit, adding a secondary master PIMG unit A-1

MD-110, application note B-1

Mitel SX-200

creating a new integration 6-22

phone system programming instructions 6-3

PIMG unit setup instructions 6-8

requirements 6-2

task list, creating an integration 6-1

Mitel SX-2000

creating a new integration 7-19

phone system programming instructions 7-3

PIMG unit setup instructions 7-5

requirements 7-2

task list, creating an integration 7-1

multiple integrations 1-5

N

NEC NEAX 2400

creating a new integration 8-19

phone system programming instructions 8-3

PIMG unit setup instructions 8-5

requirements 8-2

task list, creating an integration 8-1

Nortel Meridian 1

creating a new integration 9-24

phone system programming instructions 9-3

PIMG unit setup instructions 9-10

requirements 9-2

task list, creating an integration 9-1

O

Outgoing Hunt Order (port setting) 2-2

P

Perform Message Notification (port setting) 2-2

phone systems, supported 1-1

PIMG integrations, supported phone systems 1-1

PIMG settings for firmware version 5.x D-1

ports

considerations for Cisco Unity Connection cluster 2-3

planning how many will answer calls 2-3

planning how many will dial out 2-3

planning number to install 2-2

planning setup 2-1

settings 2-1

R

redundant master PIMG unit, adding A-1

Rolm 9751

creating a new integration 10-20

phone system programming instructions 10-3

PIMG unit setup instructions 10-7

requirements 10-2

task list, creating an integration 10-1

S

secondary master PIMG unit

adding A-1

analog voice line connections to A-1

configuring A-5

serial data cable connections to A-4

Send MWI Requests (port setting) 2-2

serial (SMDI, MCI, or MD-110) integration

connections 1-3

creating a new integration 11-19

description 1-3

Ericsson MD-110, application note B-1

Nortel SL-100, application note C-1

phone system programming instructions 11-3

PIMG unit setup instructions 11-4

requirements 11-2

task list 11-1

Siemens Hicom 300 E (European)

creating a new integration 12-19

phone system programming instructions 12-3

PIMG unit setup instructions 12-5

requirements 12-2

task list, creating an integration 12-1

Siemens Hicom 300 E (North American)

clearing MWIs from legacy system 13-3

creating a new integration 13-21

phone system programming instructions 13-3

PIMG unit setup instructions 13-6

requirements 13-2

task list, creating an integration 13-1

SMDI, application note C-1

supported phone systems 1-1

T

testing

setting up supervised transfer 14-3

setting up test configuration 14-1

testing an external call with release transfer 14-2

testing supervised transfer 14-3

testing the functionality for listening to messages 14-3

V

voice messaging ports, settings 2-1