Cisco Emergency Responder 9.0 Administration Guide
Preface
Downloads: This chapterpdf (PDF - 1.12MB) The complete bookPDF (PDF - 9.16MB) | Feedback

Preface

Preface

This preface describes who should read this publication and explains the document conventions.

The preface contains the following topics:

Overview

This document provides you with the required information to install, configure, manage, and use Cisco Emergency Responder (Emergency Responder).

Audience

Network engineers, system administrators, and telecom engineers should review this guide to learn the steps required to properly set up Emergency Responder in the network. Because of the close interaction of Emergency Responder with Cisco Unified Communications Manager, you should be familiar with Cisco Unified Communications Manager before deploying Emergency Responder.

Security personnel should also read this document.

Organization

The following table details how this guide is organized:

Topic

Description

Planning for Cisco Emergency Responder

Provides information to help you understand emergency call ordinances, how Emergency Responder helps you meet the ordinances, and what you must do to deploy Emergency Responder successfully.

Cisco Emergency Responder Installation

Provides detailed information about installing or upgrading to Emergency Responder.

Configuring Cisco Unified Communications Manager

Describes the configuration procedures for Unified CM 4.1, 4.2, and 4.3 for Emergency Responder.

Cisco Emergency Responder Configuration

Describes the configuration procedure for Emergency Responder.

Emergency Responder and Intrado V9-1-1 Enterprise Services

Describes how to configure Emergency Responder to interoperate with Intrado V-9-1-1 Enterprise.

Cisco Emergency Responder Serviceability Configuration

Describes how to configure and use Emergency Responder Serviceability features.

Configuring The Cisco Unified Operating System for Cisco Emergency Responder

Describes how to configure and use the Cisco Unified Communications Operating System, which is bundled with Emergency Responder.

Configure Cisco Emergency Responder Disaster Recovery System

Describes how to configure the Cisco Emergency Responder Disaster Recovery System.

Cisco Emergency Responder Admin Utility

Describes how to use the Cisco Emergency Responder Admin Utility.

Cisco Emergency Responder User Preparation

Describes the various roles for Emergency Responder users.

Troubleshoot Cisco Emergency Responder

Addresses problems you might encounter with Emergency Responder and provides ways to resolve them; also includes other tasks associated with problem identification and resolution.

ALI Formatting Tool

Describes the ALI Formatting Tool (AFT) and provides information about how to use and troubleshoot the AFT.

Cisco Emergency Responder Administration Web Interface

Describes the fields on the pages of the Emergency Responder administrator web interface.

Cisco Emergency Responder Serviceability Web Interface

Describes the Emergency Responder serviceability web interface.

Cisco Unified Operating System Administration Web Interface for Cisco Emergency Responder

Describes the Cisco Unified Operating System (OS) Administration web interface.

Disaster Recovery System Web Interface for Cisco Emergency Responder

Describes the Cisco Emergency Responder Disaster Recovery System Administration web interface.

Admin Utility Web Interface for Cisco Emergency Responder

Describes the Cisco Emergency Responder Admin Utility web interface.

CLI

Provides information about the Cisco Unified OS Administration CLI, including available commands, command syntax, and parameters.

Using AFT for Specific Service Providers

Provides service-provider specific information for use in conjunction with the AFT.

Event Log Messages

Provides Emergency Responder based Event Log messages and administrative alerts.

Cisco Emergency Responder Port Usage

Provides information about the ports used by Emergency Responder.

Related Documentation

For additional information about Cisco Emergency Responder (Emergency Responder) and Cisco Unified Communications Manager, see the following publications.

Documentation Support and Security Guidelines

For a listing of new documentation or information about obtaining documentation and support or providing documentation feedback, see the monthly What's New in Cisco Product Documentation at:

http:/​/​www.cisco.com/​en/​US/​docs/​general/​whatsnew/​whatsnew.html

Cisco Product Security Overview

This product contains cryptographic features and is subject to United States and local country laws governing import, export, transfer and use. Delivery of Cisco cryptographic products does not imply third-party authority to import, export, distribute or use encryption. Importers, exporters, distributors and users are responsible for compliance with U.S. and local country laws. By using this product you agree to comply with applicable laws and regulations. If you are unable to comply with U.S. and local laws, return this product immediately.

Further information regarding U.S. export regulations may be found at http:/​/​www.access.gpo.gov/​bis/​ear/​ear_​data.html.

Acknowledgments

This product includes software developed by Justin Wells and Semiotek Inc. for use in the WebMacro Servlet Framework (http://www.webmacro.org).

You may use WebMacro for use under the GNU General Public License. You may also use WebMacro under the terms of the Semiotek Public License. The terms of the Semiotek Public License are as follows:

Copyright (c) 1997, 1998, 1999, 2000, 2011 Semiotek Inc.

All rights reserved.

Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met:

  1. Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer.
  2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution.
  3. All advertising materials mentioning features or use of this software must display the following acknowledgment: "This product includes software developed by Justin Wells and Semiotek Inc. for use in the WebMacro Servlet Framework (http://www.webmacro.org)."
  4. The names "Semiotek Inc." and "WebMacro" must not be used to endorse or promote products derived from this software without prior written permission. For written permission, please contact justin@webmacro.org
  5. Products derived from this software may not be called "WebMacro" nor may "WebMacro" appear in their names without prior written permission of Justin Wells.
  6. Redistributions of any form whatsoever must retain the following acknowledgment: "This product includes software developed by Justin Wells and Semiotek Inc. for use in the WebMacro Servlet Framework (http://www.webmacro.org)."

THIS SOFTWARE IS PROVIDED BY SEMIOTEK INC. "AS IS" AND ANY EXPRESSED OR IMPLIED WARRANTIES OR CONDITIONS, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OR CONDITIONS OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL SEMIOTEK INC. OR ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.