Select a link from the list below to find prerequisite documents, provisioning procedures, or references.
Caution: If you are a system administrator, review the System Security information first. It details the security packages applied to the Cisco BTS 10200 Softswitch. These security packages are used to reduce the effectiveness of external attacks by denial-of-service or intrusion attempts. (See also Additional Security Links.)
Release Notes - Contains a brief summary of new features and release-specific issues.
Component Interoperability - Contains a list of external network elements (NEs), such as gateways, routers, application servers, phones, SIP endpoints, ATAs, eMTAs, CMTSs, and ITPs tested for interoperability with the Cisco BTS 10200 Softswitch. Check this list before attempting to deploy or operate external network elements with the Cisco BTS 10200 Softswitch.
Using the Provisioning Tools - Information on the various tools and interfaces you can use to provision the Cisco BTS 10200 Softswitch.
Provisioning Internal Components - Procedure for provisioning the Call Agent and Feature Server components.
Provisioning Network and Subscriber Features - Provisioning procedures for setting up network-based and subscriber-specific telephony features.
Provisioning Routing and Dial Plan - Detailed information on routing, translation, and dial plan parameters.
Provisioning Protocol-Specific Interfaces - Detailed guidance on provisioning the interfaces for SIGTRAN/SS7, ISDN, CAS, PacketCable, and SIP signaling.
Provisioning Subscribers, Endpoints, and Groups - Provisioning procedures for adding subscribers, endpoints (IADs, ATAs, and eMTAs), Multiline hunt groups (MLHGs), and Centrex groups.
Important reference material on provisioning commands and system features.