Guest

Cisco BTS 10200 Softswitch

opticall_mib - Release 4.4

-- Copyright (c) 2003, 2004, 2005 by Cisco Systems, Inc.
-- 
-- Proprietary               Information of Cisco Systems Inc. 
-- 
-- Module:                   BTS10200 Softswitch Mib Definition. 
-- 
-- Revision:                 4.4
-- 
-- Authors:                   Brandon Doan
--                            Nandita Rajagopalan
--                            Jerry Chao
--

IPCELL-CA-MIB DEFINITIONS ::= BEGIN
IMPORTS
	YesNo,
	ClearMeasurement,
	Integer0To100,
	DisplayString0To64,
	Integer1To100,
	DisplayString0To255,
	Integer1To9999,
	DisplayString1To255,
	DisplayString1To32,
	SuperRouteType,
	DisplayString1To64,
	Integer0To9999,
	DayOfWeek,
	KAMState,
	DisplayString0To16,
	Integer1To200,
	Integer1To4,
	Integer0To512,
	Integer1To512,
	Integer0To65535,
	StatInterval,
	DisplayString1To200,
	DisplayString1To16,
	TimeOfDay,
	ADMAdminState,
	ADMTargetState,
	MGWOperState,
	AGGROperState,
	SGPOperState,
	DPCOperState,
	SCTPAssOperState,
	TrunkGrpOperState,
	TerminationOperState,
	TrunkTermStaticState,
	TrunkTermDynamicState,
	SCTPAssTargetState,
	ADMMode,
	MinuteSecondString,
	ControlState,
	DisplayString0To32,
	OptiMGWOperState,
	OptiTerminationOperState,
	OptiTrunkGrpOperState
 		FROM IPCELL-TC
	MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE, TimeTicks, Counter32, Counter64, Integer32, IpAddress, enterprises, mib-2
		FROM SNMPv2-SMI
	DisplayString, RowStatus, TruthValue, DateAndTime
		FROM SNMPv2-TC
	MODULE-COMPLIANCE, OBJECT-GROUP
		FROM SNMPv2-CONF;

--
--YesNo ::= TEXTUAL-CONVENTION 
--	STATUS	current
--	DESCRIPTION	"yes/no enumerator (yes = 1, no = 2)"
--	SYNTAX 		INTEGER { yes ( 1 ) , no ( 2 ) } 
--
--ClearMeasurement ::= TEXTUAL-CONVENTION 
--	STATUS	current
--	DESCRIPTION	"Clear Measurement (clear = 1; for SETs only, notCleared = 2; for GETs only)"
--	SYNTAX 		INTEGER { clear ( 1 ) , notCleared ( 2 ) } 
--
--Integer0To100 ::= TEXTUAL-CONVENTION 
--	STATUS	current
--	DESCRIPTION	"Integer size from 0 to 100"
--	SYNTAX 		INTEGER ( 0..100 ) 
--
--DisplayString0To64 ::= TEXTUAL-CONVENTION 
--	STATUS	current
--	DESCRIPTION	"DisplayString size from 0 to 64"
--	SYNTAX 		DisplayString ( SIZE ( 0..64 ) ) 
--
--Integer1To100 ::= TEXTUAL-CONVENTION 
--	STATUS	current
--	DESCRIPTION	"Integer size from 1 to 100"
--	SYNTAX 		INTEGER ( 1..100 ) 
--
--DisplayString0To255 ::= TEXTUAL-CONVENTION 
--	STATUS	current
--	DESCRIPTION	"DisplayString size from 0 to 255"
--	SYNTAX 		DisplayString ( SIZE ( 0..255 ) ) 
--
--Integer1To9999 ::= TEXTUAL-CONVENTION 
--	STATUS	current
--	DESCRIPTION	"Integer size from 1 to 9999"
--	SYNTAX 		INTEGER ( 1..9999 ) 
--
--DisplayString1To255 ::= TEXTUAL-CONVENTION 
--	STATUS	current
--	DESCRIPTION	"DisplayString size from 1 to 255"
--	SYNTAX 		DisplayString ( SIZE ( 1..255 ) ) 
--
--DisplayString1To32 ::= TEXTUAL-CONVENTION 
--	STATUS	current
--	DESCRIPTION	"DisplayString size from 1 to 32"
--	SYNTAX 		DisplayString ( SIZE ( 1..32 ) ) 
--
--SuperRouteType ::= TEXTUAL-CONVENTION 
--	STATUS	current
--	DESCRIPTION	"Super Route Type"
--	SYNTAX 		INTEGER { tod ( 1 ) , percent ( 2 ) , prefix ( 3 ) , linebase ( 4 ) , eightXX( 5 ) , route ( 6 ) , callingArea ( 7 ) } 
--
--DisplayString1To64 ::= TEXTUAL-CONVENTION 
--	STATUS	current
--	DESCRIPTION	"DisplayString size from 1 to 64"
--	SYNTAX 		DisplayString ( SIZE ( 1..64 ) ) 
--
--Integer0To9999 ::= TEXTUAL-CONVENTION 
--	STATUS	current
--	DESCRIPTION	"Integer size from 0 to 9999"
--	SYNTAX 		INTEGER ( 0..9999 ) 
--
--DayOfWeek ::= TEXTUAL-CONVENTION 
--	STATUS	current
--	DESCRIPTION	"Day of week enumeration"
--	SYNTAX 		INTEGER { sun ( 1 ) , mon ( 2 ) , tue ( 3 ) , wed ( 4 ) , thu ( 5 ) , fri ( 6 ) , sat ( 7 ) } 
--
--KAMState ::= TEXTUAL-CONVENTION 
--	STATUS	current
--	DESCRIPTION	"One of specified State.  Values 1-3 can be used int SET requests; values 4-30 are returned in GET requests"
--	SYNTAX 		INTEGER { normal ( 1 ) , forcedActiveStandby ( 2 ) , forcedStandbyActive ( 3 ), initialNormal ( 4 ), activeNormal (5), standbyNormal (6), transActiveNormal (7), transStandbyNormal (8), faultyNormal (9), unknownNormal (10), initialForced (11), activeForced (12), standbyForced (13), transActiveForced (14), transStandbyForced (15), faultyForced (16), unknownForced (17), initialUnknown (18), activeUnknown (19), standbyUnknown (20), transActiveUnknown (21), transStandbyUnknown (22), faultyUnknown (23), unknownUnknown (24), startNormal (25), startForced (26), startUnknown (27), unknownRedundancyStateNormal (28), unknownRedundancyStateForced (29), unknownRedundancyStateUnknown (30) } 
--
--DisplayString0To16 ::= TEXTUAL-CONVENTION 
--	STATUS	current
--	DESCRIPTION	"DisplayString size from 0 to 16"
--	SYNTAX 		DisplayString ( SIZE ( 0..16 ) ) 
--
--Integer1To200 ::= TEXTUAL-CONVENTION 
--	STATUS	current
--	DESCRIPTION	"Integer with size of 1 to 200"
--	SYNTAX 		INTEGER ( 1..200 ) 
--
--Integer1To4 ::= TEXTUAL-CONVENTION 
--	STATUS	current
--	DESCRIPTION	"Integer size from 1 to 4"
--	SYNTAX 		INTEGER ( 1..4 ) 
--
--Integer0To512 ::= TEXTUAL-CONVENTION 
--	STATUS	current
--	DESCRIPTION	"Integer size from 0 to 512"
--	SYNTAX 		INTEGER ( 0..512 ) 
--
--Integer1To512 ::= TEXTUAL-CONVENTION 
--	STATUS	current
--	DESCRIPTION	"Integer size from 1 to 512"
--	SYNTAX 		INTEGER ( 1..512 ) 
--
--Integer0To65535 ::= TEXTUAL-CONVENTION 
--	STATUS	current
--	DESCRIPTION	"Integer size from 0 to 65535"
--	SYNTAX 		INTEGER ( 0..65535 ) 
--
--StatInterval ::= TEXTUAL-CONVENTION 
--	STATUS	current
--	DESCRIPTION	"Integer size from 1 to 96"
--	SYNTAX 		INTEGER ( 1..96 ) 
--
--DisplayString1To200 ::= TEXTUAL-CONVENTION 
--	STATUS	current
--	DESCRIPTION	"Display string in of size 1 to 200"
--	SYNTAX 		DisplayString ( SIZE ( 1..200 ) ) 
--
--DisplayString1To16 ::= TEXTUAL-CONVENTION 
--	STATUS	current
--	DESCRIPTION	"DisplayString size from 1 to 16"
--	SYNTAX 		DisplayString ( SIZE ( 1..16 ) ) 
--
--TimeOfDay ::= TEXTUAL-CONVENTION 
--	STATUS	current
--	DESCRIPTION	"5 Characters in the format: hh:mm"
--	SYNTAX 		DisplayString ( SIZE ( 5 ) ) 
--
--ADMTargetState ::= TEXTUAL-CONVENTION
--     STATUS  current
--     DESCRIPTION     "Trunk/Gateway Status"
--     SYNTAX          INTEGER { notSet ( 1 ), maintenance ( 2 ) , inService ( 3 ) , outOfService ( 4 ) , unequipped  ( 5 ) }
--
--SCTPAssTargetState ::= TEXTUAL-CONVENTION
--     STATUS  current
--     DESCRIPTION     "SCTP Associated Target State"
--     SYNTAX          INTEGER { notSet ( 1 ), inService ( 2 ) , outOfService ( 3 ) }
--
--MGWOperState ::= TEXTUAL-CONVENTION
--        STATUS  current
--        DESCRIPTION     "MGW Operational Status"
--        SYNTAX          INTEGER { mgwStatusUnknown ( 1 ), mgwStatusWorking ( 2 ), mgwStatusDown ( 3 ) , mgwStatusUnreachable ( 4 ) }
--
--AGGROperState ::= TEXTUAL-CONVENTION
--        STATUS  current
--        DESCRIPTION     "AGGR Operational Status"
--        SYNTAX          INTEGER { aggrInitializing ( 1 ), aggrConnecting ( 2 ), aggrOutOfService ( 3 ) , aggrInService ( 4 ), aggrUnknownState ( 5 ) }
--
--OptiMGWOperState ::= TEXTUAL-CONVENTION
--	STATUS  current
--	DESCRIPTION	"MGW Operational Status"
--	SYNTAX		INTEGER { nonFaulty ( 1 ), faulty ( 2 ), nonFaultyRemotelyBlocked ( 3 ), faultyRemotelyBlocked ( 4 ) }
--
--OptiTerminationOperState ::= TEXTUAL-CONVENTION
--	STATUS  current
--	DESCRIPTION	"Termination Operational Status"
--	SYNTAX		INTEGER { nonFaulty ( 1 ), faulty ( 2 ), nonFaultyRemotelyBlocked ( 3 ), faultyRemotelyBlocked ( 4 ) }
--
--OptiTrunkGrpOperState ::= TEXTUAL-CONVENTION
--	STATUS  current
--	DESCRIPTION	"Trunk Group Operational Status"
--	SYNTAX		INTEGER { nonFaulty ( 1 ), faulty ( 2 ), nonFaultyRemotelyBlocked ( 3 ), faultyRemotelyBlocked ( 4 ) }
--
--TrunkGrpOperState ::= TEXTUAL-CONVENTION
--        STATUS  current
--        DESCRIPTION     "Trunk Grp Operational Status"
--        SYNTAX          INTEGER { tgIns ( 1 ), tgOos ( 2 ) , tgMb ( 3 ) , tgWait ( 4 ), tgStby ( 5 ), tgRestoreSessionSetReqNormal ( 6 ), tgRestoreSessionSetReqSwitchover ( 7 ), tgRestoreSessionSetReqMaint ( 8 ), tgRestoreSessionSetFailNormal ( 9 ), tgRestoreSessionSetFailSwitchover ( 10 ), tgRestoreSessionSetFailMaint ( 11 ), tgRestoreEstablishReqNormal ( 12 ), tgRestoreEstablishReqSwitchover ( 13 ), tgRestoreEstablishReqMaint ( 14 ), tgRestoreEstablishFailNormal ( 15 ), tgRestoreEstablishFailSwitchover ( 16 ), tgRestoreEstablishFailMaint ( 17 ), tgMaint ( 18 ), tgDownSessionSetFailSoftNormal ( 19 ), tgDownSessionSetFailHardNormal ( 20 ), tgDownSessionSetFailSoftMaint ( 21 ), tgDownSessionSetFailHardMaint ( 22 ), tgDownEstablishReqSoftNormal ( 23 ), tgDownEstablishReqHardNormal ( 24 ), tgDownEstablishReqSoftMaint ( 25 ), tgDownEstablishReqHardMaint ( 26 ), tgDownEstablishFailSoftNormal ( 27 ), tgDownEstablishFailHardNormal ( 28 ), tgDownEstablishFailSoftMaint ( 29 ), tgDownEstablishFailHardMaint ( 30 ), tgRemoveGraceful ( 31 ), tgRemoveReleaseReq ( 32 ), tgRemoveSessionSetReq ( 33 ), tgRemoveGracefulInsMaint ( 34 ), tgSeizedFarEnd ( 35 ), tgUnknownState ( 36 ) }
--
--TerminationOperState ::= TEXTUAL-CONVENTION
--        STATUS  current
--        DESCRIPTION     "Termination Operational Status"
--        SYNTAX          INTEGER { termStateNotAudited ( 1 ), termAvailNewCalls ( 2) , termIntializationAudit ( 3 ) , termProgressFaultRecovery ( 4 ), termNotWorkingNeedManualIntervention (5), termNotAvailNeedRsipResetMsg (6), termUnreachable (7), termUnreachableRecoveryInProcess ( 8 ), termReservedNotInCall ( 9 ) , termInTransientIncomingOutgoingCall ( 10 ) , termInitializedInStableCall ( 11 ), termInStableCallGoingDown (12), termNotInitializedTransientCallInProgress (13), termNotInitializedReservedFeatCall (14), termFaultRecoveryOnInTransientCall (15), termInFaultInTransientCall (16), termUnreachableRecoveryOnInTransientCall (17), termInTransientCallGoingDown (18), termFaultRecoveryOnInStableCall (19), termFaultInStableCall (20), termUnreachableRecoveryOnInStableCall (21), termStateUndefined (22), h323TermIdleState (23), h323TermIncomingBusyState (24), h323TermOutgoingBusyState (25), h323TermTransientState (26), h323TermIncomingBusyTransientState (27), h323TermOutgoingBusyTransientState (28) }
--
--SGPOperState ::= TEXTUAL-CONVENTION
--        STATUS  current
--        DESCRIPTION     "SGP Operational Status"
--        SYNTAX          INTEGER { notInUse ( 1 ), inService ( 2) , oosSctpAssocDown ( 3 ) , oosM3uaDown ( 4 ), unknown (5), operNotSupported ( 6 ) }
--
--DPCOperState ::= TEXTUAL-CONVENTION
--        STATUS  current
--        DESCRIPTION     "DPC Operational Status"
--        SYNTAX          INTEGER { available ( 1 ), unavailable ( 2) , congested ( 3 ) , congestedAtLevelOne ( 4 ), congestedAtLevelTwo (5), congetstedAtLevelThree (6), userPartUnavailable (7), unknown ( 8 ), operNotSupported ( 9 ), notInUse (10) }
--
--SCTPAssOperState ::= TEXTUAL-CONVENTION
--        STATUS  current
--        DESCRIPTION     "SCTP Association Operational Status"
--        SYNTAX          INTEGER { notInUse ( 1 ), oos ( 2) , inService ( 3 ) , unknown ( 4 ), operNotSupported (5) }
--
--ADMAdminState ::= TEXTUAL-CONVENTION
--     STATUS  current
--     DESCRIPTION     "Trunk/Gateway Admin Status"
--     SYNTAX          INTEGER { adminIns ( 1 ), adminOos ( 2 ) , adminMaint ( 3 ) , adminOosPending ( 4 ), adminMaintPending (5), adminUeqp (6), adminForcedStandbyActive (7), adminForcedActiveStandby (8), adminNormal (9), adminNull (10), unknown (11) }
--
--TrunkTermStaticState ::= TEXTUAL-CONVENTION
--     STATUS  current
--     DESCRIPTION     "Trunk/Gateway Static Status"
--     SYNTAX          INTEGER { actv ( 1 ), lblk ( 2 ) , rblk ( 3 ), lblkRblk( 4 ), ueqp ( 5 ), invalidState ( 6 ), unknown ( 7 ) }
--
--TrunkTermDynamicState ::= TEXTUAL-CONVENTION
--     STATUS  current
--     DESCRIPTION     "Trunk/Gateway Oper Status"
--     SYNTAX          INTEGER { idle ( 1 ), ibsy ( 2 ) , obsy ( 3 ) , trans ( 4 ), transIbsy ( 5 ), transObsy ( 6 ), invalidState ( 7 ), unknown ( 8 ) }
--
--ADMMode ::= TEXTUAL-CONVENTION
--     STATUS  current
--     DESCRIPTION     "ADM Status/Control Mode"
--     SYNTAX          INTEGER { notSet ( 1 ), forced ( 2 ), graceful ( 3 ) }
--
--
--ControlState ::= TEXTUAL-CONVENTION 
--	STATUS	current
--	DESCRIPTION	"Handles the stateless nature of sets.  When the user is done setting each individual cell within a row, they will set this variable to 1.  If all the rows are not set, then insufficient data will be returned.
--If it's successful, then committed is returned.  When the user does a get on this variable, only insufficientData or readyToCommit is returned.  Normally, after the user peforms a commit, the agent clears the data"
--	SYNTAX 		INTEGER { commit ( 1 ) , insufficientData ( 2 ) , readyToCommit ( 3 ), committed ( 4 ) } 
--
--MinuteSecondString ::= TEXTUAL-CONVENTION 
--	STATUS	current
--	DESCRIPTION	"Minute/Second string in the format: mm:ss"
--	SYNTAX 		DisplayString (SIZE(5))
--
--DisplayString0To32 ::= TEXTUAL-CONVENTION 
--	STATUS	current
--	DESCRIPTION	"DisplayString size from 0 to 32"
--	SYNTAX 		DisplayString ( SIZE ( 0..32 ) ) 
--


opticall	MODULE-IDENTITY
	LAST-UPDATED	"200404021400Z"
	ORGANIZATION	"Cisco BTS10200 Softswitch"
	CONTACT-INFO	"Cisco Systems Customer Service

             Postal: 170 W. Tasman Drive
                     San Jose, CA  95134
                     USA

              Phone: +1 800 553-NETS

              EMail: BTS-SUPPORT@cisco.com"
	DESCRIPTION
		"The MIB module supplies the basic management object 
for the Cisco BTS10200 Call Agent."

	REVISION        "200404021400Z"
	DESCRIPTION
		"
Modified Following:
1. Added H323 Termination Operation States.
2. Obsoleted all emsTraps and callAgentTraps - replaced all traps with new 
	trap structure under following new Object IDs: billingTraps, 
	callpTraps, configTraps, databaseTraps, maintenanceTraps, ossTraps, 
	securityTraps, signalingTraps, statisticsTraps, systemTraps, auditTraps.
3. Removed Sequence Number as a valid search criteria for event retransmission.
4. Modified description of start and date of event retrasmission tokens to 
	remove milliseconds.
5. Added following new Stat Tables: statPCTToolsTable, statAINToolsTable, 
	statCallToolsTable.
6. Modified counters in statAINSVCTable.
7. Obsoleted table statISUPTable.
8. Added additional counters to statISDNTranslationTable.
		"

	REVISION        "200305221400Z"
	DESCRIPTION
		"
Shuffled around last few EmsTraps OID to synchronize with previous 3.5 mib.
		"

	REVISION        "200210241400Z"
	DESCRIPTION
		"
Modified Following:
1. KAMState added six additional states (25-30).
2. TerminationOperState valid states have completely changed.
3. DPCOperState added an additional state (10).
4. Moved tables from ss7Adapter branch to signalingAdapterStatusControl:
	sgpOAMPTable, dpcOAMPTable, sctpAssOAMPTable
5. Added branches: fsStatistics, signalingAdapterStatistics,
	signalingAdapterStatusControl, signalingAdapterTrapPrefix.
6. Added new counters to Statistics Table: statPOTSFSTable, statSIMTable,
	statSIATable, statISDNTransTable.
7. Removed counters from Statistics Table: statTGUsageTable.
8. Obsoleted counters from Statistics Table: statBillingTable.
9. Added new Statistics Table: statISUPSGATable, statDQOSTable, statEMATable,
	statAINSVCTable, statINAPTable, statTSATable, statTCAPTable, 
	statSCCPTable, statM3UATable, statSUATable, statSCTPTable
10. Obsoleted Statistics Table: statAINFSTable, statTrunkTable.
11. Obsoleted Optimized Table: optiMediaGatewayOAMPTable,
	optiSubscrLineTermOAMPTable, optiTrunkGroupOAMPTable, 
	optiTrunkTermOAMPTable
12. Modified trap name and/or descriptions for: emsTraps (126, 127, 134) 
	and callAgentTraps (5, 16, 74, 90, 91) 
13. Obsoleted traps: emsTraps (129) and callAgentTraps(42).
14. Added traps: emsTraps (148-156) and callAgentTraps (92-98).
15. Added aggrOAMPTable to perform status/control on AGGR.
15. Added mechanism to retrieve fast Bulk Statuses in following tables: mgwBulkStatTable, trunkGroupBulkStatPage, subscriberTermBulkStatTable, trunkTermBulkStatTable.
		"

	REVISION        "200206131400Z"
	DESCRIPTION
		"
Modified Following:
1. Added additional counters to statistics table of BILLING.
2. Added traps emsTraps 132-144.
3. Added columns TrapDestFilterTypes and TrapDestFilterLevels to TrapDestTable.
4. Added Varbinds alarmSubsystem, alarmSeverity, and alarmID to all traps.
5. Added more details in description of traffic counters/statisitics.
6. Added more details in description of traps.
		"

	REVISION        "200204161400Z"
	DESCRIPTION
		"
Modified Following:
1. Added additional counters to statistics table of POTS FS, AIN FS, SIM, 
   and SIA.
2. Changed all occurences of OtherNxx to just Nxx in statistics tables POTS FS,
   SIM, and SIA.
3. Modified counters in statistics table H323.
4. Added additional counters to statistics table ISUP.
5. Added traps emsTraps 122-131 and callAgentTraps 73-91.
		"

	REVISION        "200101151400Z"
	DESCRIPTION
		"Added NAS counters to Call Processing Statistics Table.  Deleted some commented lines."

	REVISION        "200011291400Z"
	DESCRIPTION
		"Added back the optimized Status/Control Tables for MGW, Trunk Grp, Sub Term, and Trunk Term."

	REVISION	"200010261400Z"
	DESCRIPTION
		"Added statTrunkTable."

	REVISION        "200010141400Z"
	DESCRIPTION
		"Removed optimized Status/Control Tables for MGW, Trunk Grp, Sub Term, and Trunk Term."

	REVISION	"200010091400Z"
	DESCRIPTION
		"
Modified following:
1. Removed comments.
2. Added UEQP to Status/Control Tables.
3. Added optimized Status/Control Tables for MGW, Trunk Grp, Sub Term, and Trunk Term.
4. Update the list of Traps to reflect what is supported (generated) on EMS.
5. Added one new entry to statSIMTable.
6. Added serveral new entries to statPOTSFSTable.
7. Modified Trunk Group Number from Integer 1-9999 to Integer32.
8. Made TrapDest Table modifiable through BTS10200 Softswitch CLI instead of via NMS.
		"

	REVISION	"200010051400Z"
	DESCRIPTION
		"
Modified Following:
1. Added EMS traps 114-122 (Maintenance Subsystem).
2. Added BDMS status/control.
3. Changed the returnable states for Status/Control: KAMState, 
   TrunkGrpOperState, TerminationOperState, ADMAdminState, TrunkTermStaticState,
   TrunkTermDynamicState, and MGWOperState
		"

	REVISION	"200008011400Z"
	DESCRIPTION
		"
Modified Following:
1. Added statH323Table.
2. Added additional counters to statCallProcessingTable.
3. Added additional traps.
4. Added additional counters to statPOTSFSTable.
		"

	REVISION	"200003051400Z"
	DESCRIPTION
		"Changed AIN_FS Measurement.  Removed SIP_REINVITE_RECEIVED 
and SIP_REINVITE_SENT from all measurement tables that contains those 
entries.  Added additional traps."

  ::=  {  ipcell  1  }

ipcell	OBJECT IDENTIFIER  ::=  {  enterprises  5296  }

ems	OBJECT IDENTIFIER  ::=  {  opticall  2  }

callAgent	OBJECT IDENTIFIER  ::=  {  opticall  3  }

featureServer	OBJECT IDENTIFIER  ::=  {  opticall  4  }

statusControlOptimized	OBJECT IDENTIFIER  ::=  {  opticall  5  }

-- If needing to a constant polling for Status/Control of particular
-- elements, this branch should be used instead of the
-- callAgentStatusControl branch.  The queries to this branch is
-- considerably faster and is less expensive on the SNMP Agent CPU cycle.
-- This will give faulty/non-faulty states which suffices most situations.

emsOptimized	OBJECT IDENTIFIER  ::=  {  statusControlOptimized  1  }

callAgentOptimized	OBJECT IDENTIFIER  ::=  {  statusControlOptimized  2  }

featureServerOptimized	OBJECT IDENTIFIER  ::=  {  statusControlOptimized  3  }

signalingAdapter	OBJECT IDENTIFIER  ::=  {  opticall  6  }

fsAin	OBJECT IDENTIFIER  ::=  {  featureServer  1  }

fsPotsCtx	OBJECT IDENTIFIER  ::=  {  featureServer  2  }

fsStatistics	OBJECT IDENTIFIER  ::=  {  featureServer  4  }

emsStatusControl	OBJECT IDENTIFIER  ::=  {  ems  1  }

emsTrapPrefix	OBJECT IDENTIFIER  ::=  {  ems  2  }

emsTraps	OBJECT IDENTIFIER  ::=  {  emsTrapPrefix  0  }

emsStatistics	OBJECT IDENTIFIER  ::=  {  ems  3  }

callAgentStatusControl	OBJECT IDENTIFIER  ::=  {  callAgent  1  }

-- See comments regarding usage under statusControlOptimized OID

callAgentTrapPrefix	OBJECT IDENTIFIER  ::=  {  callAgent  2  }

callAgentTraps	OBJECT IDENTIFIER  ::=  {  callAgentTrapPrefix  0  }

callAgentStatistics	OBJECT IDENTIFIER  ::=  {  callAgent  3  }

fsPotsCtxStatusControl	OBJECT IDENTIFIER  ::=  {  fsPotsCtx  1  }

fsPotsCtxTrapPrefix	OBJECT IDENTIFIER  ::=  {  fsPotsCtx  2  }

fsPotsCtxTraps	OBJECT IDENTIFIER  ::=  {  fsPotsCtxTrapPrefix  0  }

fsPotsCtxStatistics	OBJECT IDENTIFIER  ::=  {  fsPotsCtx  3  }

fsAinStatusControl	OBJECT IDENTIFIER  ::=  {  fsAin  1  }

fsAinTrapPrefix	OBJECT IDENTIFIER  ::=  {  fsAin  2  }

fsAinTraps	OBJECT IDENTIFIER  ::=  {  fsAinTrapPrefix  0  }

fsAinStatistics	OBJECT IDENTIFIER  ::=  {  fsAin  3  }

signalingAdapterStatusControl	OBJECT IDENTIFIER  ::=  {  signalingAdapter  1  }

signalingAdapterTrapPrefix	OBJECT IDENTIFIER  ::=  {  signalingAdapter  2  }

signalingAdapterStatistics	OBJECT IDENTIFIER  ::=  {  signalingAdapter  3  }

signalingAdapterTraps	OBJECT IDENTIFIER  ::=  {  signalingAdapterTrapPrefix  0  }

statusControlBulk	OBJECT IDENTIFIER  ::=  {  opticall  8  }

generalTraps	OBJECT IDENTIFIER  ::=  {  opticall  1  }

btsTrapPrefix	OBJECT IDENTIFIER  ::=  {  generalTraps  5  }

billingTraps	OBJECT IDENTIFIER  ::=  {  btsTrapPrefix  1  }

callpTraps	OBJECT IDENTIFIER  ::=  {  btsTrapPrefix  2  }

configTraps	OBJECT IDENTIFIER  ::=  {  btsTrapPrefix  3  }

databaseTraps	OBJECT IDENTIFIER  ::=  {  btsTrapPrefix  4  }

maintenanceTraps	OBJECT IDENTIFIER  ::=  {  btsTrapPrefix  5  }

ossTraps	OBJECT IDENTIFIER  ::=  {  btsTrapPrefix  6  }

securityTraps	OBJECT IDENTIFIER  ::=  {  btsTrapPrefix  7  }

signalingTraps	OBJECT IDENTIFIER  ::=  {  btsTrapPrefix  8  }

statisticsTraps	OBJECT IDENTIFIER  ::=  {  btsTrapPrefix  9  }

systemTraps	OBJECT IDENTIFIER  ::=  {  btsTrapPrefix  10  }

auditTraps	OBJECT IDENTIFIER  ::=  {  btsTrapPrefix  11  }

system  OBJECT IDENTIFIER  ::=  {  mib-2  1  }



alarmObjectTable		OBJECT-TYPE
    SYNTAX SEQUENCE OF		AlarmObjectEntry
    MAX-ACCESS			not-accessible
    STATUS			current
    DESCRIPTION
	"A list of variables detailing a trap sent up with the trap."
    ::= { generalTraps 1 }

alarmObjectEntry		OBJECT-TYPE
        SYNTAX		            AlarmObjectEntry
        MAX-ACCESS		    not-accessible
        STATUS			    current
        DESCRIPTION
	        "Each entry represents a variable corresponding to a variable within an opticall event."
        INDEX  { alarmSubsystem, alarmServerity, alarmID }
        ::=  { alarmObjectTable 1 }

AlarmObjectEntry ::= SEQUENCE {
	alarmSubsystem  INTEGER,
	alarmServerity  INTEGER,
	alarmID  INTEGER,
	alarmSetCleared  INTEGER,
	alarmComponentID  DisplayString1To64,
	alarmComponentType  DisplayString1To64,
	alarmDetails  DisplayString,
	alarmTime  DisplayString
	}

alarmSubsystem  OBJECT-TYPE
	SYNTAX INTEGER { billing ( 1 ), callp ( 2 ) , config ( 3 ) , database ( 4 ) , maintenance ( 5 ) , oss ( 6 ) , security ( 7 ) , signaling ( 8 ) , statistics ( 9 ) , system ( 10 ) , audit ( 11 ) }
	MAX-ACCESS	read-only
	STATUS  current


	DESCRIPTION
		"Subsystem which generated the alarm"

	::=  {  alarmObjectEntry  1  }

alarmServerity  OBJECT-TYPE
	SYNTAX  INTEGER { critical ( 1 ) , major ( 2 ) , minor ( 3 ) , warning ( 4 ) , informational ( 5 ) , debug ( 6 ) }
	MAX-ACCESS	read-only
	STATUS  current


	DESCRIPTION
		"Severity of the alarm."

	::=  {  alarmObjectEntry  2  }

alarmID OBJECT-TYPE
	SYNTAX  INTEGER ( 0..2147483647 )
	MAX-ACCESS	read-only 
	STATUS  current


	DESCRIPTION
		"Alarm identification number"

	::=  {  alarmObjectEntry  3  }

alarmSetCleared OBJECT-TYPE
	SYNTAX  INTEGER { off ( 1 ) , on ( 2 ) , ignore ( 3 ) , acknowledge ( 4 ) }
	MAX-ACCESS	read-only
	STATUS  current


	DESCRIPTION
		"Alarm OFF, ON, IGNORED, or ACKNOWLEDGED"

	::=  {  alarmObjectEntry  4  }

alarmComponentID	OBJECT-TYPE
	SYNTAX  DisplayString1To64
	MAX-ACCESS	read-only
	STATUS  current


	DESCRIPTION
		"Alarm Component ID"

	::=  {  alarmObjectEntry  5  }

alarmComponentType	OBJECT-TYPE
	SYNTAX  DisplayString1To64
	MAX-ACCESS	read-only
	STATUS  current


	DESCRIPTION
		"Alarm Component Type"

	::=  {  alarmObjectEntry  6  }

alarmDetails	OBJECT-TYPE
	SYNTAX  DisplayString ( SIZE ( 1..65536 ) )
	MAX-ACCESS	read-only
	STATUS  current


	DESCRIPTION
		"Details of the alarms in the format:
key1=value1; key2=value2; ...; key8=value8
Maximum key/value pair is 8."

	::=  {  alarmObjectEntry  7  }

alarmTime	OBJECT-TYPE
	SYNTAX  DisplayString (SIZE (0..255))
	MAX-ACCESS	read-only
	STATUS  current


	DESCRIPTION
		"Time alarm was generated.  It is in the form:
		dow mon dd hh:mm:ss zzz yyyy

		where:
		dow is the day of the week (Sun, Mon, Tue, Wed, Thu, Fri, Sat). 
		mon is the month (Jan, Feb, Mar, Apr, May, Jun, Jul, Aug, Sep, 
			Oct, Nov, Dec). 
		dd is the day of the month (01 through 31), as two decimal 
			digits. 
		hh is the hour of the day (00 through 23), as two decimal 
			digits. 
		mm is the minute within the hour (00 through 59), as two 
			decimal digits. 
		ss is the second within the minute (00 through 61), as two 
			decimal digits. 
		zzz is the time zone (and may reflect daylight savings time). 
			Standard time zone abbreviations include those 
			recognized by the method parse. If time zone 
			informationi is not available, then zzz is 
			empty - that is, it consists of no characters at all. 
		yyyy is the year, as four decimal digits."

	::=  {  alarmObjectEntry  8  }


sysDescr OBJECT-TYPE
              SYNTAX  DisplayString (SIZE (0..255))
              MAX-ACCESS  read-only
              STATUS  current
              DESCRIPTION
                      "A textual description of the entity.  This value
                      should include the full name and version
                      identification of the system's hardware type,
                      software operating-system, and networking
                      software.  It is mandatory that this only contain
                      printable ASCII characters."
              DEFVAL  { "IPCell Opticall SNMP Agent" }
              ::= { system 1 }

          sysObjectID OBJECT-TYPE
              SYNTAX  OBJECT IDENTIFIER
              MAX-ACCESS  read-only
              STATUS  current
              DESCRIPTION
                      "The vendor's authoritative identification of the
                      network management subsystem contained in the
                      entity.  This value is allocated within the SMI
                      enterprises subtree (1.3.6.1.4.1) and provides an
                      easy and unambiguous means for determining `what
                      kind of box' is being managed.  For example, if
                      vendor `Flintstones, Inc.' was assigned the
                      subtree 1.3.6.1.4.1.4242, it could assign the
                      identifier 1.3.6.1.4.1.4242.1.1 to its `Fred
                      Router'.:
                      read-command : C:\windows\ping kiwi"
              DEFVAL  { { 1 3 6 1 4 1 5296 1 } }
               ::= { system 2 }

          sysUpTime OBJECT-TYPE
              SYNTAX  TimeTicks
              MAX-ACCESS  read-only
              STATUS  current
              DESCRIPTION
                      "The time (in hundredths of a second) since the
                      network management portion of the system was last
                      re-initialized.:
                      READ-COMMAND: echo sysuptime"
              ::= { system 3 }

          sysContact OBJECT-TYPE
              SYNTAX  DisplayString (SIZE (0..255))
              MAX-ACCESS  read-write
              STATUS  current
              DESCRIPTION
                      "The textual identification of the contact person
                      for this managed node, together with information
                      on how to contact this person.:
                      READ-COMMAND: c:\windows\netstat -n"
              ::= { system 4 }

          sysName OBJECT-TYPE
              SYNTAX  DisplayString (SIZE (0..255))
              MAX-ACCESS  read-write
              STATUS  current
              DESCRIPTION
                      "An administratively-assigned name for this
                      managed node.  By convention, this is the node's
                      fully-qualified domain name."
              ::= { system 5 }

          sysLocation OBJECT-TYPE
              SYNTAX  DisplayString (SIZE (0..255))
              MAX-ACCESS  read-write
              STATUS  current
              DESCRIPTION
                      "The physical location of this node (e.g.,
                      `telephone closet, 3rd floor')."
              ::= { system 6 }

          sysServices OBJECT-TYPE
              SYNTAX  INTEGER (0..127)
              MAX-ACCESS  read-only
              STATUS  current
              DESCRIPTION
                      "A value which indicates the set of services that
                      this entity primarily offers.

                      The value is a sum.  This sum initially takes the
                      value zero, Then, for each layer, L, in the range
                      1 through 7, that this node performs transactions
                      for, 2 raised to (L - 1) is added to the sum.  For
                      example, a node which performs primarily routing
                      functions would have a value of 4 (2^(3-1)).  In
                      contrast, a node which is a host offering
                      application services would have a value of 72
                      (2^(4-1) + 2^(7-1)).  Note that in the context of
                      the Internet suite of protocols, values should be
                      calculated accordingly:

                           layer  functionality
                               1  physical (e.g., repeaters)
                               2  datalink/subnetwork (e.g., bridges)
                               3  internet (e.g., IP gateways)
                               4  end-to-end  (e.g., IP hosts)
                               7  applications (e.g., mail relays)

                      For systems including OSI protocols, layers 5 and
                      6 may also be counted."
              ::= { system 7 }


trapDestTable	OBJECT-TYPE
	SYNTAX	SEQUENCE  OF  TrapDestEntry
	MAX-ACCESS	not-accessible
	STATUS	current
 	DESCRIPTION
		"A list of trap destination entries."
	::=  { generalTraps  2 }

trapDestEntry	OBJECT-TYPE
	SYNTAX	TrapDestEntry
	MAX-ACCESS	not-accessible
	STATUS	current
 	DESCRIPTION
		"This entry includes a destination IP address to which to send
        traps for this community."
	INDEX	{  trapDestIndex  }
	::=  { trapDestTable 1 }

TrapDestEntry  ::=  SEQUENCE {
	trapDestIndex  Integer32,
	trapDestCommunity  OCTET STRING,
	trapDestAddress  IpAddress,
	trapDestPort  INTEGER,
	trapDestOwner  DisplayString,
	trapDestStatus  RowStatus,
	trapDestFilterTypes  Integer32,
	trapDestFilterLevels  Integer32
	}
trapDestIndex	OBJECT-TYPE 
	SYNTAX	Integer32
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"A value that uniquely identifies this trapDestEntry.
Whatever value entered will be overwritten to be a unique value when stored."
	
	::=  {  trapDestEntry  1  }

trapDestCommunity	OBJECT-TYPE 
	SYNTAX	OCTET STRING ( SIZE ( 0..127 ) )  
	MAX-ACCESS	read-only
	STATUS	current
 
	
	DESCRIPTION
		"A community to which this destination address belongs.
        This entry is associated with any eventEntries in the RMON
        MIB whose value of eventCommunity is equal to the value of
        this object.  Every time an associated event entry sends a
        trap due to an event, that trap will be sent to each
        address in the trapDestTable with a trapDestCommunity equal to
        eventCommunity.

        This object may not be modified if the associated
        trapDestStatus object is equal to active(1)."
	
	::=  {  trapDestEntry  2  }

trapDestAddress	OBJECT-TYPE 
	SYNTAX	IpAddress 
	MAX-ACCESS	read-only
	STATUS	current
 
	
	DESCRIPTION
		"The address to send traps on behalf of this entry."
	
	::=  {  trapDestEntry  3  }

trapDestPort	OBJECT-TYPE 
	SYNTAX	INTEGER ( 1..65535 )  
	MAX-ACCESS	read-only
	STATUS	current
 
	
	DESCRIPTION
		"The port to send traps on behalf of this entry."
	
	::=  {  trapDestEntry  4  }

trapDestOwner	OBJECT-TYPE 
	SYNTAX	DisplayString ( SIZE ( 0..127 ) )  
	MAX-ACCESS	read-only
	STATUS	current
 
	
	DESCRIPTION
		"The entity that configured this entry and is
        therefore using the resources assigned to it."
	
	::=  {  trapDestEntry  5  }

trapDestStatus	OBJECT-TYPE 
	SYNTAX	RowStatus 
	MAX-ACCESS	read-only
	STATUS	current
 
	
	DESCRIPTION
		"The status of this trap destination entry.
        An entry may not exist in the active state unless all
        objects in the entry have an appropriate value."
	
	::=  {  trapDestEntry  6  }

trapDestFilterTypes	OBJECT-TYPE 
	SYNTAX	Integer32 
	MAX-ACCESS	read-only
	STATUS	current
 
	
	DESCRIPTION
		"Ranges from 0-32767.  A bitmask that specifies which 
		subsystem types of the events to filter or permitted to be 
		sent to this address.  This is used in combination with 
		Filterlevels to provide a granular filter for traps from the 
		SNMP Agent side.  From right to left the following bits 
		specifies the following subsystem types:
		Bit #1: BILLING (right-most bit)
		Bit #2: CALLP
		Bit #3: CONFIG
		Bit #4: DATABASE
		Bit #5: MAINTENANCE
		Bit #6: OSS
		Bit #7: SECURITY
		Bit #8: SIGNALING
		Bit #9: STATISTICS
		Bit #10: SYSTEM
		Bit #11: AUDIT (left-most bit)

		For example, in order to receive only CONFIG, DATABASE, and 
		SIGNALING traps, then the filter in binary would 
		be (0010001100) which converts to integer value of (140) to be 
		entered as the token value.  If all types are to be received 
		then the binary would be (1111111111) which converts 
		to (1023) as the token value.  And likewise if no types are to 
		be received then the binary would be (0000000000) which 
		converts to (0) as the token value."
	
	::=  {  trapDestEntry  7  }

trapDestFilterLevels	OBJECT-TYPE 
	SYNTAX	Integer32 
	MAX-ACCESS	read-only
	STATUS	current
 
	
	DESCRIPTION
		"Ranges from 0-63.  A bitmask that specifies which levels of 
		the events to filter or permitted to be sent to this address.  
		This is used in combination with Filtertypes to provide a 
		granular filter for traps from the SNMP Agent side.  From 
		right to left the following bits specifies the following 
		levels:
		Bit #1: DEBUG (right-most bit)
		Bit #2: INFO
		Bit #3: WARNING
		Bit #4: MINOR
		Bit #5: MAJOR
		Bit #6: CRITICAL (left-most bit)

		For example, in order to receive only INFO, MINOR, and MAJOR 
		traps, then the filter in binary would be (011010) which 
		converts to integer value of (26) to be entered as the token 
		value.  If all levels are to be received then the binary would 
		be (111111) which converts to (63) as the token value.  And 
		likewise if no levels are to be received then the binary would 
		be (000000) which converts to (0) as the token value.  
		WARNING: Any filter that permits levels DEBUG and/or INFO 
		traps will cause a high number of traps to be sent and tax the 
		system resources on the SNMP Agent on the EMS; care must be 
		taken when specifying numbers that converts to binary 
		containing bits 1 or 2 turned on such 
		as (49-51), (57-59), (61-63), etc.!"
	
	::=  {  trapDestEntry  8  }


eventRetransmission	OBJECT IDENTIFIER  ::=  {  generalTraps  3  }

eventHistory	OBJECT IDENTIFIER  ::=  {  eventRetransmission  1  }

eventSequenceNumStart	OBJECT-TYPE
              SYNTAX  Counter64
              MAX-ACCESS  read-only
              STATUS  current
              DESCRIPTION
                      "The sequence number of the oldest event contained in 
		the event history db.  The result return is the 
		immediate snapshot of what is in the db.  Therefore, 
		it could change immediately after retrieval."
              ::= { eventHistory 1 }

eventSequenceNumEnd	OBJECT-TYPE
              SYNTAX  Counter64
              MAX-ACCESS  read-only
              STATUS  current
              DESCRIPTION
                      "The sequence number of the newest event contained in 
		the event history db.  The result return is the 
		immediate snapshot of what is in the db.  Therefore, 
		it could change immediately after retrieval."
              ::= { eventHistory 2 }


eventDateStampStart	OBJECT-TYPE
              SYNTAX  DisplayString
              MAX-ACCESS  read-only
              STATUS  current
              DESCRIPTION
                      "The date of the oldest event contained in 
		the event history db.  The result return is the immediate 
		snapshot of what is in the db.  Therefore, it could change 
		immediately after retrieval.

		The date string is in the form:
		yyyy-MM-dd HH:mm:ss.SSS

		where:
		yyyy is the year, as four decimal digits.
		MM is the month of the year (01 through 12), as two decimal 
			digits.
		dd is the day of the month (01 through 31), as two decimal 
			digits. 
		HH is the hour of the day (00 through 23), as two decimal 
			digits. 
		mm is the minute within the hour (00 through 59), as two 
			decimal digits. 
		ss is the second within the minute (00 through 61), as two 
			decimal digits. 
		SSS is the millisecond (000 through 999), as three 
			decimal digits."
              ::= { eventHistory 3 }


eventDateStampEnd	OBJECT-TYPE
              SYNTAX  DisplayString
              MAX-ACCESS  read-only
              STATUS  current
              DESCRIPTION
                      "The date of the newest event contained in 
		the event history db.  The result return is the immediate 
		snapshot of what is in the db.  Therefore, it could change 
		immediately after retrieval.

		The date string is in the form:
		yyyy-MM-dd HH:mm:ss.SSS

		where:
		yyyy is the year, as four decimal digits.
		MM is the month of the year (01 through 12), as two decimal 
			digits.
		dd is the day of the month (01 through 31), as two decimal 
			digits. 
		HH is the hour of the day (00 through 23), as two decimal 
			digits. 
		mm is the minute within the hour (00 through 59), as two 
			decimal digits. 
		ss is the second within the minute (00 through 61), as two 
			decimal digits. 
		SSS is the millisecond (000 through 999), as three 
			decimal digits."
              ::= { eventHistory 4 }


retransmitExecuteParameters	OBJECT IDENTIFIER  ::=  {  eventRetransmission  2  }

retranParamSeqNumStart	OBJECT-TYPE
              SYNTAX  Counter64
              MAX-ACCESS  read-write
              STATUS  current
              DESCRIPTION
                      "Retransmission of events using sequence numbers in the 
		db.  Refer to eventHistory OIDs for the 
		valid range of sequence numbers.
		If retranParamSeqNumStart is set 
		then it will be assumed all events between the 
		retranParamSeqNumStart and the latest event will be 
		transmitted.

		If retranParamSeqNumStart AND retranParamDateStart is used, 
		then retranParamSeqNumStart takes precedence over 
		retranParamDateStart (in conjunction with 
		retranParamDateEnd - if used).

		To clear this value, set it to '0' (zero)."

              ::= { retransmitExecuteParameters 1 }

retranParamDateStart	OBJECT-TYPE
              SYNTAX  DisplayString
              MAX-ACCESS  read-write
              STATUS  current
              DESCRIPTION
                      "Retransmission of events using date in the 
		db.  This parameter, inclusive, is used in conjuction with 
		retranParamDateEnd, inclusive, to specify the range of events 
		to be retransmitted.  Refer to eventHistory OIDs for the 
		valid range of dates.
		If this parameter is set and retranParamDateEnd is not, 
		then it will be assumed all events between the 
		retranParamDateStart and the latest event will be 
		transmitted.
		If retranParamDateStart is set and retranParamDateEnd is 
		not, then it will be assumed all events between the 
		retranParamDateStart and the latest event will be 
		transmitted.
		If retranParamDateEnd is set and retranParamDateStart is
		not, then it will be assumed all events up to the
		retranParamDateEnd will be transmitted.

		If retranParamSeqNumStart AND retranParamDateStart is used, 
		then retranParamSeqNumStart takes precedence over 
		retranParamDateStart (in conjunction with 
		retranParamDateEnd - if used).

		To clear this value set it to ''.

		The date string is in the form:
		yyyy-MM-dd HH:mm:ss

		where:
		yyyy is the year, as four decimal digits.
		MM is the month of the year (01 through 12), as two decimal 
			digits.
		dd is the day of the month (01 through 31), as two decimal 
			digits. 
		HH is the hour of the day (00 through 23), as two decimal 
			digits. 
		mm is the minute within the hour (00 through 59), as two 
			decimal digits. 
		ss is the second within the minute (00 through 61), as two 
			decimal digits."
              ::= { retransmitExecuteParameters 3 }

retranParamDateEnd	OBJECT-TYPE
              SYNTAX  DisplayString
              MAX-ACCESS  read-write
              STATUS  current
              DESCRIPTION
                      "Retransmission of events using date in the 
		db.  This parameter, inclusive, is used in conjuction with 
		retranParamDateStart, inclusive, to specify the range of events
		to be retransmitted.  Refer to eventHistory OIDs for the 
		valid range of sequence numbers.
		If retranParamDateStart is set and retranParamDateEnd is 
		not, then it will be assumed all events between the 
		retranParamDateStart and the latest event will be 
		transmitted.
		If retranParamDateEnd is set and retranParamDateStart is
		not, then it will be assumed all events up to the
		retranParamDateEnd will be transmitted.

		If retranParamSeqNumStart AND retranParamDateStart is used, 
		then retranParamSeqNumStart takes precedence over 
		retranParamDateStart (in conjunction with 
		retranParamDateEnd - if used).

		To clear this value set it to ''.

		The date string is in the form:
		yyyy-MM-dd HH:mm:ss

		where:
		yyyy is the year, as four decimal digits.
		MM is the month of the year (01 through 12), as two decimal 
			digits.
		dd is the day of the month (01 through 31), as two decimal 
			digits. 
		HH is the hour of the day (00 through 23), as two decimal 
			digits. 
		mm is the minute within the hour (00 through 59), as two 
			decimal digits. 
		ss is the second within the minute (00 through 61), as two 
			decimal digits."
              ::= { retransmitExecuteParameters 4 }

retranParamLimit	OBJECT-TYPE
              SYNTAX  Counter64
              MAX-ACCESS  read-write
              STATUS  current
              DESCRIPTION
                      "Limit the number of events to be retransmitted.
		To clear this value set it to '0' (zero)."

              ::= { retransmitExecuteParameters 5 }

retranParamSeverity	OBJECT-TYPE
              SYNTAX  INTEGER { notSet ( 0 ) , info ( 1 ) , warn ( 2 ) , minor ( 3 ) , major ( 4 ) , critical ( 5 ) }
              MAX-ACCESS  read-write
              STATUS  current
              DESCRIPTION
                      "Retransmission of events that are of a particular 
		severity only.

		To clear this value, set it to '0' (zero)."

		DEFVAL	{0}

              ::= { retransmitExecuteParameters 6 }

retranParamType	OBJECT-TYPE
              SYNTAX  INTEGER { notSet ( 0 ) , billing ( 1 ) , callp ( 2 ) , config ( 3 ) , database ( 4 ) , maintenance ( 5 ) , oss ( 6 ) , security ( 7 ) , signaling ( 8 ) , statistics ( 9 ) , system ( 10 ) , audit ( 11 ) }
              MAX-ACCESS  read-write
              STATUS  current
              DESCRIPTION
                      "Retransmission of events that are of a particular 
		type only.

		To clear this value, set it to '0' (zero)."

		DEFVAL	{0}

              ::= { retransmitExecuteParameters 7 }

retranParamNMSAddr	OBJECT-TYPE
              SYNTAX  DisplayString
              MAX-ACCESS  read-write
              STATUS  current
              DESCRIPTION
                      "Denotes address(es) of NMS(s) to retransmit traps to.  
		The list of address(es) are delimited by a semicolon (;) and 
		must be the same address(es) that are stored in the 
		TrapDestTable as it appears.  If the keyword 'all' (case 
		insensitve) is specified, then the trap retransmission will 
		be sent to all NMSs configured in the TrapDestTable.  If this 
		field is NOT set, then the SNMP agent will use the address of 
		the originator of the request.

		To clear this value set it to ''."
              ::= { retransmitExecuteParameters 8 }

retranParamExecute	OBJECT-TYPE
              SYNTAX  INTEGER { commit ( 1 ) , cancel ( 2 ) , clearAllParameters ( 3 ) , processing ( 4 ) , readyToCommit ( 5 ) }
              MAX-ACCESS  read-write
              STATUS  current
              DESCRIPTION
		"Set this parameter to '1' (commit) to actually perform the 
		transmission of events using the parameters set under 
		retransmitExecuteParameters OID. If not successful, then a 
		general error is returned.  If the manager does a commit
		without any parameters set, then ALL events will be sent to 
		the NMS doing the set.  WARNING: this might consume large amount
		resources and time to send out all events if there are a 
		large number of events.

		Set the parameter to '2' (cancel) if the NMS requests to stop 
		and cancel current retransmission from that particular NMS.  
		If there are no current transmission, then nothing happens.

		Set the parameter to '3' (clear-all-parameters) to clear out 
		all parameters associated for that particular NMS requesting 
		the set.

		If the manager does a get on this parameter, then 2 possible 
		states will be return: '4' (processing) is returned if 
		the Agent is in the middle of processing that particular NMSs 
		previous retransmission request.  Or, '5' (ready-to-commit) if 
		the Agent can handle the request from the NMSs.

		The manager must wait at least 10 seconds before executing 
		another commit"
              ::= { retransmitExecuteParameters 9 }



statPOTSFSTable	OBJECT-TYPE
	SYNTAX	SEQUENCE  OF  StatPOTSFSEntry
	MAX-ACCESS	not-accessible
	STATUS	current
 	DESCRIPTION
		"POTS Feature Server Statistics."
	::=  { fsPotsCtxStatistics  1 }

statPOTSFSEntry	OBJECT-TYPE
	SYNTAX	StatPOTSFSEntry
	MAX-ACCESS	not-accessible
	STATUS	current
 	DESCRIPTION
		"Row description for POTS Feature Server Table."
	INDEX	{  statPOTSFSComponentID  }
	::=  { statPOTSFSTable 1 }

StatPOTSFSEntry  ::=  SEQUENCE {
	statPOTSFSComponentID  DisplayString,
	statPOTSFSDOW  DayOfWeek,
	statPOTSFSTOD  TimeOfDay,
	statPOTSFSSIPInMsgRcv  Counter32,
	statPOTSFSSIPInMsgRcvSucc  Counter32,
	statPOTSFSSIPOutMsgRcv  Counter32,
	statPOTSFSSIPOutMsgRcvSucc Counter32,
	statPOTSFSSIPMsgREQRETRANRcv  Counter32,
	statPOTSFSSIPMsgREQRETRANXmit  Counter32,
	statPOTSFSSIPMsgRSPRETRANRcv  Counter32,
	statPOTSFSSIPMsgRSPRETRANXmit  Counter32,
	statPOTSFSSIPT1TimerExpired  Counter32,
	statPOTSFSSIPT2TimerReached  Counter32,
	statPOTSFSSIPMsgINVITERcv  Counter32,
	statPOTSFSSIPMsgINVITEXmit  Counter32,
	statPOTSFSSIPMsgCANCELRcv  Counter32,
	statPOTSFSSIPMsgCANCELXmit  Counter32,
	statPOTSFSSIPMsgBYERcv  Counter32,
	statPOTSFSSIPMsgBYEXmit  Counter32,
	statPOTSFSSIPMsgACKRcv  Counter32,
	statPOTSFSSIPMsgACKXmit  Counter32,
	statPOTSFSSIPMsgOPTIONRcv  Counter32,
	statPOTSFSSIPMsgOPTIONXmit  Counter32,
	statPOTSFSSIPMsgREGISTERRcv  Counter32,
	statPOTSFSSIPMsgREGISTERXmit  Counter32,
	statPOTSFSSIPMsgINFORcv  Counter32,
	statPOTSFSSIPMsgINFOXmit  Counter32,
	statPOTSFSSIPMsgNotifyRcv  Counter32,
	statPOTSFSSIPMsgNotifyXmit  Counter32,
	statPOTSFSSIP100Rcv  Counter32,
	statPOTSFSSIP100Xmit  Counter32,
	statPOTSFSSIP18xRcv  Counter32,
	statPOTSFSSIP18xXmit  Counter32,
	statPOTSFSSIP200Rcv  Counter32,
	statPOTSFSSIP200Xmit  Counter32,
	statPOTSFSSIP3xxRcv  Counter32,
	statPOTSFSSIP3xxXmit  Counter32,
	statPOTSFSSIP4xxRcv  Counter32,
	statPOTSFSSIP4xxXmit  Counter32,
	statPOTSFSSIP5xxRcv  Counter32,
	statPOTSFSSIP5xxXmit  Counter32,
	statPOTSFSSIP6xxRcv  Counter32,
	statPOTSFSSIP6xxXmit  Counter32,
	statPOTSFSSIP7xxRcv  Counter32,
	statPOTSFSSIP7xxXmit  Counter32,
	statPOTSFSANIScreeningSuccess  Counter32,
	statPOTSFSANIScreeningBlocked  Counter32,
	statPOTSFSCallsBlockedNANPBW  Counter32,
	statPOTSFSCallsBlockedIntlBW  Counter32,
	statPOTSFSCallsBlocked900Rest  Counter32,
	statPOTSFSCallsBlocked976Rest  Counter32,
	statPOTSFSCallsBlockedNANPRest  Counter32,
	statPOTSFSCallsBlockedIntlRest  Counter32,
	statPOTSFSCallsBlockedCasualRest  Counter32,
	statPOTSFSCallsBlockedDARest  Counter32,
	statPOTSFSCallsBlockedNANPOperRest  Counter32,
	statPOTSFSCallsBlockedIntlOperRest  Counter32,
	statPOTSFSAuthCodeSuccess  Counter32,
	statPOTSFSAuthCodeFailure  Counter32,
	statPOTSFSAccountCodeSuccess  Counter32,
	statPOTSFSAccountCodeFailure  Counter32,
	statPOTSFSMsgCFUActAttempt  Counter32,
	statPOTSFSMsgCFUDeactAttempt  Counter32,
	statPOTSFSMsgCFUActRefusals  Counter32,
	statPOTSFSMsgCFUActAnswered  Counter32,
	statPOTSFSMsgCFUActSecond  Counter32,
	statPOTSFSMsgCFUForwardFail  Counter32,
	statPOTSFSMsgCFUForwardSucc  Counter32,
	statPOTSFSMsgCFBActAttempt  Counter32,
	statPOTSFSMsgCFBDeactAttempt  Counter32,
	statPOTSFSMsgCFBActRefusals  Counter32,
	statPOTSFSMsgCFBForwardFail  Counter32,
	statPOTSFSMsgCFBForwardSucc  Counter32,
	statPOTSFSMsgCFNAActAttempt  Counter32,
	statPOTSFSMsgCFNADeactAttempt  Counter32,
	statPOTSFSMsgCFNAActRefusals  Counter32,
	statPOTSFSMsgCFNAForwardFail  Counter32,
	statPOTSFSMsgCFNAForwardSucc  Counter32,
	statPOTSFSMsgCWAttempt  Counter32,
	statPOTSFSMsgCWAnswered  Counter32,
	statPOTSFSMsgCWNotAnswered  Counter32,
	statPOTSFSMsgCWRejectNoResource  Counter32,
	statPOTSFSMsgCWRejectInteraction  Counter32,
	statPOTSFSMsgCCWAttempt  Counter32,
	statPOTSFSMsgCCWLength  Counter32,
	statPOTSFSMsgCCWRejectNoResource  Counter32,
	statPOTSFSMsgCCWRejectByCCW  Counter32,
	statPOTSFSMsgCHDAttempts	Counter32,
	statPOTSFSMsgCHDAnswered	Counter32,
	statPOTSFSMsgCHDNotAnswered	Counter32,
	statPOTSFSMsgCHDRejectNoResource	Counter32,
	statPOTSFSMsgCHDRejectInteractions	Counter32,
	statPOTSFSMsgMDCAttempts	Counter32,
	statPOTSFSMsgMDCRejectNoResource	Counter32,
	statPOTSFSMsgMDCRejectInteractions	Counter32,
	statPOTSFSMsgMDCRejectOthers	Counter32,
	statPOTSFSMsgCTAttempts		Counter32,
	statPOTSFSMsgCTAnswered		Counter32,
	statPOTSFSMsgCTTransferred	Counter32,
	statPOTSFSMsgCTConferenced	Counter32,
	statPOTSFSMsgCTFailed		Counter32,
	statPOTSFSMsgTWCAttempts		Counter32,
	statPOTSFSMsgTWCAnswered		Counter32,
	statPOTSFSMsgTWCConferenced	Counter32,
	statPOTSFSMsgTWCFailed		Counter32,
	statPOTSFSHotlineAttempts		Counter32,
	statPOTSFSWarmlineAttempts		Counter32,
	statPOTSFSMsgBLVAttempts		Counter32,
	statPOTSFSOprInterruptAttempts		Counter32,
	statPOTSFSMsgSCRAttempts		Counter32,
	statPOTSFSMsgSCAAttemps		Counter32,
	statPOTSFSMsgSCRRejectNoRsrcs		Counter32,
	statPOTSFSMsgSCARejectNoRsrcs		Counter32,
	statPOTSFSMsgSCRSucc		Counter32,
	statPOTSFSMsgSCASucc		Counter32,
	statPOTSFSMsgDRCWAttempts		Counter32,
	statPOTSFSMsgDRCWRejectNoRsrcs		Counter32,
	statPOTSFSMsgDRCWSucc		Counter32,
	statPOTSFSMsgSCFAttempts		Counter32,
	statPOTSFSMsgSCFRejectNoRsrcs		Counter32,
	statPOTSFSMsgSCFSucc		Counter32,
	statPOTSFSMsgCOTAccess		Counter32,
	statPOTSFSMsgCOTDenied		Counter32,
	statPOTSFSMsgCOTAct		Counter32,
	statPOTSFSMsgCOTAbandoned		Counter32,
	statPOTSFSMsgCOTDnUnavail		Counter32,
	statPOTSFSMsgCOTTraceConfirmed		Counter32,
	statPOTSFSMsgCOTTraceOutput		Counter32,
	statPOTSFSMsgRACFAttempts		Counter32,
	statPOTSFSMsgRACFRefused		Counter32,
	statPOTSFSMsgRACFRejectNoRsrcs		Counter32,
	statPOTSFSMsgRACFMsgCFUAct		Counter32,
	statPOTSFSMsgRACFMsgCFUDeact		Counter32,
	statPOTSFSMsgRACFMsgCFUUnchanged		Counter32,
	statPOTSFSMsgRACFPinAttempts		Counter32,
	statPOTSFSMsgRACFPinRefused		Counter32,
	statPOTSFSMsgRACFPinRejectNoRsrcs		Counter32,
	statPOTSFSMsgRACFPinChanged		Counter32,
	statPOTSFSMsgRACFPinUnchanged		Counter32,
	statPOTSFSMsgACActivationAttempts		Counter32,
	statPOTSFSMsgACOverflows		Counter32,
	statPOTSFSMsgACImmediateProcessing		Counter32,
	statPOTSFSMsgACDelayedProcessing		Counter32,
	statPOTSFSMsgACDeactivatedBySystem		Counter32,
	statPOTSFSMsgACDeactivationAttempts		Counter32,
	statPOTSFSMsgACInterlataAttempts		Counter32,
	statPOTSFSMsgARActivationAttempts		Counter32,
	statPOTSFSMsgAROverflows		Counter32,
	statPOTSFSMsgARImmediateProcessing		Counter32,
	statPOTSFSMsgARDelayedProcessing		Counter32,
	statPOTSFSMsgARDeactivatedBySys		Counter32,
	statPOTSFSMsgARDeactivationAttmp		Counter32,
	statPOTSFSMsgARInterlataAttempts		Counter32,
	statPOTSFSMsgACARTQueuedRequests		Counter32,
	statPOTSFSMsgACARTTermScanReqs		Counter32,
	statPOTSFSMsgACARTOrigScanReqs		Counter32,
	statPOTSFSMsgACARTRejectNoResrcs		Counter32,
	statPOTSFSCTXMsgSFGCounterOverflow		Counter32,
	statPOTSFSMsgACRActAttempts		Counter32,
	statPOTSFSMsgACRDeactAttempts		Counter32,
	statPOTSFSMsgACRActRejectNoRsrcs		Counter32,
	statPOTSFSMsgACRDeactRejectNoRsrcs		Counter32,
	statPOTSFSMsgACRSucc		Counter32,
	statPOTSFSMsgDNDActSucc		Counter32,
	statPOTSFSMsgDNDActFailed		Counter32,
	statPOTSFSMsgDNDDeactSucc		Counter32,
	statPOTSFSMsgDNDDeactFailed		Counter32,
	statPOTSFSMsgDNDReject		Counter32,
	statPOTSFSCTXMsgCParkSuccAttempts		Counter32,
	statPOTSFSCTXMsgCParkFailAttempts		Counter32,
	statPOTSFSCTXMsgCParkSuccRtrvAttempts		Counter32,
	statPOTSFSCTXMsgCParkFailRtrvAttempts		Counter32,
	statPOTSFSCTXMsgCParkFwded		Counter32,
	statPOTSFSCTXMsgCParkClred		Counter32,
	statPOTSFSCTXMsgSC1DgtAttempts		Counter32,
	statPOTSFSCTXMsgSC2DgtAttempts		Counter32,
	statPOTSFSCTXMsgSCSuccCCSCAttempts		Counter32,
	statPOTSFSMsgCNDBAttempts		Counter32,
	statPOTSFSMsgCNABAttempts		Counter32,
	statPOTSFSMsgCIDSAttempts		Counter32,
	statPOTSFSMsgCIDSSAttempts		Counter32,
	statPOTSFSSIPMsgProvRSPRETRANRcv		Counter32,
	statPOTSFSSIPMsgProvRSPRETRANXmit		Counter32,
	statPOTSFSSIPMsgPRACKRcv		Counter32,
	statPOTSFSSIPMsgPRACKXmit		Counter32,
	statPOTSFSSIPMsgSUBSCRIBERcv		Counter32,
	statPOTSFSSIPMsgSUBSCRIBEXmit		Counter32,
	statPOTSFSSIPMsgREFERRcv		Counter32,
	statPOTSFSSIPMsgREFERXmit		Counter32,
	statPOTSFSSIPMsgREFERREPLACESRcv		Counter32,
	statPOTSFSSIPMsgINVITEREPLACESXmit		Counter32,
	statPOTSFSSIPMsgINVITEREPLACESRcv		Counter32,
	statPOTSFSSIPMsgREL100Rcv		Counter32,
	statPOTSFSSIPMsgREL100Xmit		Counter32,
	statPOTSFSSIPMsgUNSUPPORTEDRcv		Counter32,
	statPOTSFSMsgRCSucc		Counter32,
	statPOTSFSMsgCWDActSucc		Counter32,
	statPOTSFSMsgCWDDeactSucc		Counter32,
	statPOTSFSMsgCWDInterrogationSucc		Counter32,
	statPOTSFSMsgCWDActFail		Counter32,
	statPOTSFSMsgCWDDeactFail		Counter32,
	statPOTSFSMsgCWDInterrogationFail		Counter32,
	statPOTSFSMsgCWDAttempts		Counter32,
	statPOTSFSMsgCWDAnswered		Counter32,
	statPOTSFSMsgTWCDAttempts		Counter32,
	statPOTSFSMsgTWCDConferenced		Counter32,
	statPOTSFSMsgHOTVAttempts		Counter32,
	statPOTSFSMsgHOTVActSucc		Counter32,
	statPOTSFSMsgHOTVDeactSucc		Counter32,
	statPOTSFSMsgHOTVInterrogationSucc		Counter32,
	statPOTSFSMsgOCBLocalBlocked		Counter32,
	statPOTSFSMsgOCBNatlBlocked		Counter32,
	statPOTSFSMsgOCBIntlBlocked		Counter32,
	statPOTSFSMsgOCBInvocations		Counter32,
	statPOTSFSMsgOCBActSucc		Counter32,
	statPOTSFSMsgOCBDeactivSucc		Counter32,
	statPOTSFSMsgOCBInterrogationSucc		Counter32,
	statPOTSFSMsgOCBInvalidPasswd		Counter32,
	statPOTSFSMsgCFUInterrogationAttempts		Counter32,
	statPOTSFSMsgCFBInterrogationAttempts		Counter32,
	statPOTSFSMsgCFNAInterrogationAttempts		Counter32,
	statPOTSFSSIPMsgUPDATERcv		Counter32,
	statPOTSFSSIPMsgUPDATEXmit		Counter32,
	statPOTSFSSIPMsgREFERWREPLACESRcv		Counter32,
	statPOTSFSSIPMsgMWINotifyXmit		Counter32,
	statPOTSFSSIPMsgMWINotifyXmitFail		Counter32,
	statPOTSFSSIPMsgMWINotifyRcv		Counter32,
	statPOTSFSREFERAttmp		Counter32,
	statPOTSFSREFERFail		Counter32,
	statPOTSFSREFERSucc		Counter32,
	statPOTSFSTotalCNAMQuery		Counter32,
	statPOTSFSExtCNAMQuery		Counter32,
	statPOTSFSExtCNAMQuerySucc		Counter32,
	statPOTSFSExtCNAMFailApp		Counter32,
	statPOTSFSExtCNAMFailNetw		Counter32,
	statPOTSFSAR2LevelACCCodeAttmp		Counter32,
	statPOTSFSAR2LevelACTCodeAttmp		Counter32
	}
statPOTSFSComponentID	OBJECT-TYPE 
	SYNTAX	DisplayString 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"POTSFS Feature Server Identifier"
	
	::=  {  statPOTSFSEntry  1  }

statPOTSFSDOW	OBJECT-TYPE 
	SYNTAX	DayOfWeek 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"Day of week statistics was collected."
	
	::=  {  statPOTSFSEntry  2  }

statPOTSFSTOD	OBJECT-TYPE 
	SYNTAX	TimeOfDay 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"Time of day statistics was collected in XX minutes interval"
	
	::=  {  statPOTSFSEntry  3  }

statPOTSFSSIPInMsgRcv	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of SIP messages the reporting call agent or 
		feature server attempted to receive"
	
	::=  {  statPOTSFSEntry  4  }

statPOTSFSSIPInMsgRcvSucc	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of SIP messages the reporting call agent or 
		feature server successfully received"
	
	::=  {  statPOTSFSEntry  5  }

statPOTSFSSIPOutMsgRcv	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of SIP messages the reporting call agent or 
		feature server attempted to send"
	
	::=  {  statPOTSFSEntry  6  }

statPOTSFSSIPOutMsgRcvSucc	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of SIP messages the reporting call agent or 
		feature server successfully sent"
	
	::=  {  statPOTSFSEntry  7  }

statPOTSFSSIPMsgREQRETRANRcv	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of SIP request retransmission messages the 
		reporting call agent or feature server received"
	
	::=  {  statPOTSFSEntry  8  }

statPOTSFSSIPMsgREQRETRANXmit	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of SIP request retransmission messages the 
		reporting call agent or feature server sent"
	
	::=  {  statPOTSFSEntry  9  }

statPOTSFSSIPMsgRSPRETRANRcv	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of SIP response retransmission messages the 
		reporting call agent or feature server received"
	
	::=  {  statPOTSFSEntry  10  }

statPOTSFSSIPMsgRSPRETRANXmit	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of SIP response retransmission messages the 
		reporting call agent or feature server received"
	
	::=  {  statPOTSFSEntry  11  }

statPOTSFSSIPT1TimerExpired	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of SIP T1 Timer expirations that occurred on the 
		reporting call agent or feature server received over the 
		collection interval"
	
	::=  {  statPOTSFSEntry  12  }

statPOTSFSSIPT2TimerReached	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of SIP T2 Timer expirations that occurred on the 
		reporting call agent or feature server received over the 
		collection interval"
	
	::=  {  statPOTSFSEntry  13  }

statPOTSFSSIPMsgINVITERcv	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of SIP INVITE messages the reporting call agent 
		or feature server received"
	
	::=  {  statPOTSFSEntry  14  }

statPOTSFSSIPMsgINVITEXmit	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of SIP INVITE messages the reporting call agent 
		or feature server sent"
	
	::=  {  statPOTSFSEntry  15  }

statPOTSFSSIPMsgCANCELRcv	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of SIP CANCEL messages the reporting call agent 
		or feature server received"
	
	::=  {  statPOTSFSEntry  18  }

statPOTSFSSIPMsgCANCELXmit	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of SIP CANCEL messages the reporting call agent 
		or feature server sent"
	
	::=  {  statPOTSFSEntry  19  }

statPOTSFSSIPMsgBYERcv	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of SIP BYE messages the reporting call agent 
		or feature server received"
	
	::=  {  statPOTSFSEntry  20  }

statPOTSFSSIPMsgBYEXmit	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of SIP BYE messages the reporting call agent 
		or feature server sent"
	
	::=  {  statPOTSFSEntry  21  }

statPOTSFSSIPMsgACKRcv	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of SIP ACK messages the reporting call agent 
		or feature server received"
	
	::=  {  statPOTSFSEntry  22  }

statPOTSFSSIPMsgACKXmit	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of SIP ACK messages the reporting call agent 
		or feature server sent"
	
	::=  {  statPOTSFSEntry  23  }

statPOTSFSSIPMsgOPTIONRcv	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of SIP OPTIONS messages the reporting call agent 
		or feature server received"
	
	::=  {  statPOTSFSEntry  24  }

statPOTSFSSIPMsgOPTIONXmit	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of SIP OPTIONS messages the reporting call agent 
		or feature server sent"
	
	::=  {  statPOTSFSEntry  25  }

statPOTSFSSIPMsgREGISTERRcv	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of SIP REGISTER messages the reporting call agent 
		or feature server received"
	
	::=  {  statPOTSFSEntry  26  }

statPOTSFSSIPMsgREGISTERXmit	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of SIP REGISTER messages the reporting call agent 
		or feature server sent"
	
	::=  {  statPOTSFSEntry  27  }

statPOTSFSSIPMsgINFORcv	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of SIP INFO messages the reporting call agent 
		or feature server received"
	
	::=  {  statPOTSFSEntry  28  }

statPOTSFSSIPMsgINFOXmit	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of SIP INFO messages the reporting call agent 
		or feature server sent"
	
	::=  {  statPOTSFSEntry  29  }

statPOTSFSSIPMsgNotifyRcv	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of SIP NOTIFY messages the reporting call agent 
		or feature server received"
	
	::=  {  statPOTSFSEntry  30  }

statPOTSFSSIPMsgNotifyXmit	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of SIP NOTIFY messages the reporting call agent 
		or feature server sent"
	
	::=  {  statPOTSFSEntry  31  }

statPOTSFSSIP100Rcv	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of 100 class (TRYING) messages the reporting call 
		agent or feature server received"
	
	::=  {  statPOTSFSEntry  32  }

statPOTSFSSIP100Xmit	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of 100 class (TRYING) messages the reporting call 
		agent or feature server sent"
	
	::=  {  statPOTSFSEntry  33  }

statPOTSFSSIP18xRcv	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of 18x class (INFORMATIONAL) messages the 
		reporting call agent or feature server received"
	
	::=  {  statPOTSFSEntry  34  }

statPOTSFSSIP18xXmit	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of 18x class (INFORMATIONAL) messages the 
		reporting call agent or feature server sent"
	
	::=  {  statPOTSFSEntry  35  }

statPOTSFSSIP200Rcv	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of 200 class (SUCCESS) messages the reporting 
		call agent or feature server received"
	
	::=  {  statPOTSFSEntry  36  }

statPOTSFSSIP200Xmit	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of 200 class (SUCCESS) messages the reporting 
		call agent or feature server sent"
	
	::=  {  statPOTSFSEntry  37  }


statPOTSFSSIP3xxRcv	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of 3xx class (REDIRECTION) messages the reporting 
		call agent or feature server received"
	
	::=  {  statPOTSFSEntry  38  }

statPOTSFSSIP3xxXmit	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of 3xx class (REDIRECTION) messages the reporting 
		call agent or feature server sent"
	
	::=  {  statPOTSFSEntry  39  }

statPOTSFSSIP4xxRcv	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of 4xx class (REQUEST FAILURES) messages the 
		reporting call agent or feature server received"
	
	::=  {  statPOTSFSEntry  40  }

statPOTSFSSIP4xxXmit	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of 4xx class (REQUEST FAILURES) messages the 
		reporting call agent or feature server sent"
	
	::=  {  statPOTSFSEntry  41  }

statPOTSFSSIP5xxRcv	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of 5xx class (SERVER FAILURES) messages the 
		reporting call agent or feature server received"
	
	::=  {  statPOTSFSEntry  42  }

statPOTSFSSIP5xxXmit	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of 5xx class (SERVER FAILURES) messages the 
		reporting call agent or feature server sent"
	
	::=  {  statPOTSFSEntry  43  }

statPOTSFSSIP6xxRcv	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of 6xx class (GLOBAL FAILURES) messages the 
		reporting call agent or feature server received"
	
	::=  {  statPOTSFSEntry  44  }

statPOTSFSSIP6xxXmit	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of 6xx class (GLOBAL FAILURES) messages the 
		reporting call agent or feature server sent"
	
	::=  {  statPOTSFSEntry  45  }

statPOTSFSSIP7xxRcv	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of 7xx class (RESERVED) messages the reporting 
		call agent or feature server received"
	
	::=  {  statPOTSFSEntry  46  }

statPOTSFSSIP7xxXmit	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of 7xx class (RESERVED) messages the reporting 
		call agent or feature server sent"
	
	::=  {  statPOTSFSEntry  47 }

statPOTSFSANIScreeningSuccess	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of Automatic Number Identification directory 
		number lookups that were successfully attempted on the 
		reporting feature serverANI attempt is succesful when ANI DN 
		is available on the reporting FS, and ANI status is allowed as 
		per provisioning. (In the case of casual calls, ALL ANI 
		attempts are successful if the Casual Code is valid and 
		allowed on reporting feature server)"
	
	::=  {  statPOTSFSEntry  48  }

statPOTSFSANIScreeningBlocked	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of calls that were blocked based on Automatic 
		Number Identification directory number lookups on the 
		reporting feature server(In the case of Casual calls, ANI 
		does also get blocked if Casual Codes are invalid)."
	
	::=  {  statPOTSFSEntry  49  }

statPOTSFSCallsBlockedNANPBW	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of NANP based calls that were blocked due to a 
		match on a black list or an exclusion from a white list on 
		the reporting feature server"
	
	::=  {  statPOTSFSEntry  50  }

statPOTSFSCallsBlockedIntlBW	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of International based calls that were blocked 
		due to a match on a black list or an exclusion from a white 
		list on the reporting feature server"
	
	::=  {  statPOTSFSEntry  51  }

statPOTSFSCallsBlocked900Rest	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of calls denied due to subscriber based 900 
		restrictions on the reporting feature server"
	
	::=  {  statPOTSFSEntry  52  }

statPOTSFSCallsBlocked976Rest	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of calls denied due to subscriber based 976 
		restrictions on the reporting feature server"
	
	::=  {  statPOTSFSEntry  53  }

statPOTSFSCallsBlockedNANPRest	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of calls denied due to subscriber based 976 
		restrictions on the reporting feature server"
	
	::=  {  statPOTSFSEntry  54  }

statPOTSFSCallsBlockedIntlRest	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"Not currently used."
	
	::=  {  statPOTSFSEntry  55  }

statPOTSFSCallsBlockedCasualRest	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of calls denied due to subscriber based casual 
		dialing restrictions on the reporting feature server"
	
	::=  {  statPOTSFSEntry  56  }

statPOTSFSCallsBlockedDARest	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of calls denied due to subscriber based directory 
		assistance restrictions on the reporting feature server"
	
	::=  {  statPOTSFSEntry  57  }

statPOTSFSCallsBlockedNANPOperRest	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of calls denied due to subscriber based NANP 
		operator restrictions on the reporting feature server"
	
	::=  {  statPOTSFSEntry  58  }

statPOTSFSCallsBlockedIntlOperRest	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of calls denied due to subscriber based 
		international operator restrictions on the reporting feature 
		server"
	
	::=  {  statPOTSFSEntry  59  }

statPOTSFSAuthCodeSuccess	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of successful authentication code validations on 
		the reporting feature server"
	
	::=  {  statPOTSFSEntry  60  }

statPOTSFSAuthCodeFailure	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of unsuccessful authentication code validations on 
		the reporting feature server"
	
	::=  {  statPOTSFSEntry  61  }

statPOTSFSAccountCodeSuccess	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of successful account code validations on the 
		reporting feature server(account codes do not get 
		validated - any  dialed account code entered by the user is 
		considered valid - including an empty account code.)"
	
	::=  {  statPOTSFSEntry  62  }

statPOTSFSAccountCodeFailure	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"Not currently used."
	
	::=  {  statPOTSFSEntry  63  }

statPOTSFSMsgCFUActAttempt	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of Call Forward Unconditional activation attempts 
		on the reporting feature server"
	
	::=  {  statPOTSFSEntry  64  }

statPOTSFSMsgCFUDeactAttempt	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of Call Forward Unconditional deactivation 
		attempts on the reporting feature server"
	
	::=  {  statPOTSFSEntry  65  }

statPOTSFSMsgCFUActRefusals	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of Call Forward Unconditional activation attempts 
		refused on the reporting feature server"
	
	::=  {  statPOTSFSEntry  66  }

statPOTSFSMsgCFUActAnswered	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of Call Forward Unconditional activation attempts 
		answered by the called party on the reporting feature server"
	
	::=  {  statPOTSFSEntry  67  }

statPOTSFSMsgCFUActSecond	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of Call Forward Unconditional second activation 
		attempts on the reporting feature server"
	
	::=  {  statPOTSFSEntry  68  }

statPOTSFSMsgCFUForwardFail	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of Call Forward Unconditional service instances 
		that failed on the reporting feature server"
	
	::=  {  statPOTSFSEntry  69  }

statPOTSFSMsgCFUForwardSucc	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of Call Forward Unconditional service instances 
		that succeeded on the reporting feature server"
	
	::=  {  statPOTSFSEntry  70  }

statPOTSFSMsgCFBActAttempt	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of Call Forward Busy activation attempts on the 
		reporting feature server"
	
	::=  {  statPOTSFSEntry  71  }

statPOTSFSMsgCFBDeactAttempt	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of Call Forward Busy deactivation attempts on the 
		reporting feature server"
	
	::=  {  statPOTSFSEntry  72  }

statPOTSFSMsgCFBActRefusals	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of Call Forward Busy activation attempts refused 
		on the reporting feature server"
	
	::=  {  statPOTSFSEntry  73  }

statPOTSFSMsgCFBForwardFail	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of Call Forward Busy service instances that 
		failed on the reporting feature server"
	
	::=  {  statPOTSFSEntry  74  }

statPOTSFSMsgCFBForwardSucc	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of Call Forward Busy service instances that 
		succeeded on the reporting feature server"
	
	::=  {  statPOTSFSEntry  75  }

statPOTSFSMsgCFNAActAttempt	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of Call Forward No Answer activation attempts on 
		the reporting feature server"
	
	::=  {  statPOTSFSEntry  76  }

statPOTSFSMsgCFNADeactAttempt	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of Call Forward No Answer deactivation attempts 
		on the reporting feature server"
	
	::=  {  statPOTSFSEntry  77  }

statPOTSFSMsgCFNAActRefusals	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of Call Forward No Answer activation attempts 
		refused on the reporting feature server"
	
	::=  {  statPOTSFSEntry  78  }

statPOTSFSMsgCFNAForwardFail	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of Call Forward No Answer service instances that 
		failed on the reporting feature server"
	
	::=  {  statPOTSFSEntry  79  }

statPOTSFSMsgCFNAForwardSucc	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of Call Forward No Answer service instances that 
		succeeded on the reporting feature server"
	
	::=  {  statPOTSFSEntry  80  }

statPOTSFSMsgCWAttempt	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of Call Waiting service instance attempts on the 
		reporting feature server"
	
	::=  {  statPOTSFSEntry  81  }

statPOTSFSMsgCWAnswered	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of Call Waiting service instance attempts answered 
		by the called party on the reporting feature server"
	
	::=  {  statPOTSFSEntry  82  }

statPOTSFSMsgCWNotAnswered	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of Call Waiting service instance attempts not 
		answered by the called party on the reporting feature server"
	
	::=  {  statPOTSFSEntry  83  }

statPOTSFSMsgCWRejectNoResource	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of Call Waiting service instance attempts that 
		were rejected due to a lack of available resources on the 
		reporting feature server"
	
	::=  {  statPOTSFSEntry  84  }

statPOTSFSMsgCWRejectInteraction	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of Call Waiting service instance attempts that 
		were rejected due to feature interactions on the reporting 
		feature server"
	
	::=  {  statPOTSFSEntry  85  }

statPOTSFSMsgCCWAttempt	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of Cancel Call Waiting attempts on the reporting 
		feature server"
	
	::=  {  statPOTSFSEntry  86  }

statPOTSFSMsgCCWLength	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The total time in subscriber-seconds that Cancel Call 
		WAITING was active on the reporting feature server"
	
	::=  {  statPOTSFSEntry  87  }

statPOTSFSMsgCCWRejectNoResource	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of Cancel Call Waiting attempts that were rejected 
		due to a lack of available resources on the reporting feature 
		server"
	
	::=  {  statPOTSFSEntry  88  }

statPOTSFSMsgCCWRejectByCCW	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of Cancel Call Waiting attempts that were 
		rejected due to Call Waiting not already being active on the 
		reporting feature server"
	
	::=  {  statPOTSFSEntry  89  }

statPOTSFSMsgCHDAttempts	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of Call Hold service instance attempts on the 
		reporting feature server"
	
	::=  {  statPOTSFSEntry  90  }

statPOTSFSMsgCHDAnswered	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of Call Hold service instance attempts resulting 
		in reconnection on the reporting feature server"
	
	::=  {  statPOTSFSEntry  91  }

statPOTSFSMsgCHDNotAnswered	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of Call Hold service instance attempts that were 
		not reconnected on the reporting feature server"
	
	::=  {  statPOTSFSEntry  92  }

statPOTSFSMsgCHDRejectNoResource	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of Call Hold service instance attempts that were 
		rejected due to a lack of available resources on the reporting 
		feature server"
	
	::=  {  statPOTSFSEntry  93  }

statPOTSFSMsgCHDRejectInteractions	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of Call Hold service instance attempts that were 
		rejected due to feature interactions on the reporting feature 
		server"
	
	::=  {  statPOTSFSEntry  94  }

statPOTSFSMsgMDCAttempts	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of Mid Call Trigger attempts made by subscribers 
		on the reporting feature server"
	
	::=  {  statPOTSFSEntry  95  }

statPOTSFSMsgMDCRejectNoResource	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of Mid Call Trigger attempts made by subscribers 
		that were rejected due to a lack of available resources on 
		the reporting feature server"
	
	::=  {  statPOTSFSEntry  96  }

statPOTSFSMsgMDCRejectInteractions	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of Mid Call Trigger attempts made by subscribers 
		that were rejected due to feature interactions on the 
		reporting feature server"
	
	::=  {  statPOTSFSEntry  97  }

statPOTSFSMsgMDCRejectOthers	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of Mid Call Trigger attempts made by subscribers 
		that were rejected due to unknown reasons on the reporting 
		feature server"
	
	::=  {  statPOTSFSEntry  98  }

statPOTSFSMsgCTAttempts	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of Mid Call Trigger attempts made by subscribers 
		that were rejected due to unknown reasons on the reporting 
		feature server"
	
	::=  {  statPOTSFSEntry  99  }

statPOTSFSMsgCTAnswered	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of Call Transfer service instance attempts 
		answered by the called party on the reporting feature server"
	
	::=  {  statPOTSFSEntry  100  }

statPOTSFSMsgCTTransferred	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of Call Transfer service instance attempts 
		resulting in a successfully transferred call on the reporting 
		feature server"
	
	::=  {  statPOTSFSEntry  101  }

statPOTSFSMsgCTConferenced	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of Call Transfer service instance attempts 
		resulting in a successfully setup conference call on the 
		reporting feature server"
	
	::=  {  statPOTSFSEntry  102  }

statPOTSFSMsgCTFailed	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of Call Transfer service instance attempts that 
		failed on the reporting feature server"
	
	::=  {  statPOTSFSEntry  103  }

statPOTSFSMsgTWCAttempts	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of Three Way Call service instance attempts on the 
		reporting feature server"
	
	::=  {  statPOTSFSEntry  104  }

statPOTSFSMsgTWCAnswered	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of Three Way Call service instance attempts 
		answered by the called party on the reporting feature server"
	
	::=  {  statPOTSFSEntry  105  }

statPOTSFSMsgTWCConferenced	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of Three Way Call service instance attempts 
		resulting in a successfully setup conference call on the 
		reporting feature server"
	
	::=  {  statPOTSFSEntry  106  }

statPOTSFSMsgTWCFailed	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of Three Way Call service instance attempts that 
		failed on the reporting feature server"
	
	::=  {  statPOTSFSEntry  107  }

statPOTSFSHotlineAttempts	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of Hotline service instance attempts on the 
		reporting feature server"
	
	::=  {  statPOTSFSEntry  108  }

statPOTSFSWarmlineAttempts	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of Warmline service instance attempts on the 
		reporting feature server"
	
	::=  {  statPOTSFSEntry  109  }

statPOTSFSMsgBLVAttempts	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of Busy Line Verification service instance 
		attempts on the reporting feature server"
	
	::=  {  statPOTSFSEntry  110  }

statPOTSFSOprInterruptAttempts	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of Operator Interrupt service instance attempts 
		on the reporting feature server"
	
	::=  {  statPOTSFSEntry  111  }

statPOTSFSMsgSCRAttempts	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of Selective Call Rejection service instance 
		attempts on the reporting feature server"
	
	::=  {  statPOTSFSEntry  112  }

statPOTSFSMsgSCAAttemps	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of Selective Call Acceptance service instance 
		attempts on the reporting feature server"
	
	::=  {  statPOTSFSEntry  113  }

statPOTSFSMsgSCRRejectNoRsrcs	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of Selective Call Rejection attempts made by 
		subscribers that were rejected due to a lack of available 
		resources on the reporting feature server"
	
	::=  {  statPOTSFSEntry  114  }

statPOTSFSMsgSCARejectNoRsrcs	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of Selective Call Acceptance attempts made by 
		subscribers that were rejected due to a lack of available 
		resources on the reporting feature server"
	
	::=  {  statPOTSFSEntry  115  }

statPOTSFSMsgSCRSucc	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of Selective Call Rejection service instance 
		attempts resulting in successful rejections of the call on the 
		reporting feature server"
	
	::=  {  statPOTSFSEntry  116  }

statPOTSFSMsgSCASucc	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of Selective Call Acceptance service instance 
		attempts resulting in successful acceptance of the call on 
		the reporting feature server"
	
	::=  {  statPOTSFSEntry  117  }

statPOTSFSMsgDRCWAttempts	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of Distinctive Ring Call Waiting service instance 
		attempts on the reporting feature server"
	
	::=  {  statPOTSFSEntry  118  }

statPOTSFSMsgDRCWRejectNoRsrcs	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of Distinctive Ring Call Waiting attempts that 
		were rejected due to a lack of available resources on the 
		reporting feature server"
	
	::=  {  statPOTSFSEntry  119  }

statPOTSFSMsgDRCWSucc	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of Distinctive Ring Call Waiting attempts that 
		were successful on the reporting feature server"
	
	::=  {  statPOTSFSEntry  120  }

statPOTSFSMsgSCFAttempts	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of Selective Call Forwarding service instance 
		attempts on the reporting feature server"
	
	::=  {  statPOTSFSEntry  121  }

statPOTSFSMsgSCFRejectNoRsrcs	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of Selective Call Forwarding attempts that were 
		rejected due to a lack of available resources on the 
		reporting feature server"
	
	::=  {  statPOTSFSEntry  122  }

statPOTSFSMsgSCFSucc	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of Selective Call Forwarding attempts that were 
		successful on the reporting feature server"
	
	::=  {  statPOTSFSEntry  123  }

statPOTSFSMsgCOTAccess	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of times the Caller Originated Trace star code was 
		dialed by the subscriber (feature accesses and activations)"
	
	::=  {  statPOTSFSEntry  124  }

statPOTSFSMsgCOTDenied	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of times the Caller Originated Trace data was 
		unsuccessfully accessed on the reporting feature server"
	
	::=  {  statPOTSFSEntry  125  }

statPOTSFSMsgCOTAct	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"Same as POTS_COT_ACCESS in this release.  When 2-level 
		COT (the digit -1- dialed) is available - this counter would 
		include both those and the current 1-level activations tracked 
		in POTS_COT_ACCESS."
	
	::=  {  statPOTSFSEntry  126  }

statPOTSFSMsgCOTAbandoned	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of Caller Originated Trace service activation 
		abandonments that occurred on the reporting feature server"
	
	::=  {  statPOTSFSEntry  127  }

statPOTSFSMsgCOTDnUnavail	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of Caller Originated Trace service activation that 
		failed due to the calling party directory number not be 
		available on the reporting feature server"
	
	::=  {  statPOTSFSEntry  128  }

statPOTSFSMsgCOTTraceConfirmed	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of Caller Originated Trace service instances that 
		were successfully completed on the reporting feature server"
	
	::=  {  statPOTSFSEntry  129  }

statPOTSFSMsgCOTTraceOutput	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of Caller Originated Trace service instances that 
		were successfully completed and the data was stored 
		persistently on the reporting feature server"
	
	::=  {  statPOTSFSEntry  130  }

statPOTSFSMsgRACFAttempts	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of Remote Activation Call Forward attempts on the 
		reporting feature server"
	
	::=  {  statPOTSFSEntry  131  }

statPOTSFSMsgRACFRefused	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of Remote Activation Call Forward service 
		instances refused by the reporting feature server"
	
	::=  {  statPOTSFSEntry  132  }

statPOTSFSMsgRACFRejectNoRsrcs	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of Remote Activation Call Forward service 
		instances refused due to a lack of available resources on 
		the reporting feature server"
	
	::=  {  statPOTSFSEntry  133  }

statPOTSFSMsgRACFMsgCFUAct	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of Remote Activation Call Forward activation 
		attempts that were successful on the reporting feature server"
	
	::=  {  statPOTSFSEntry  134  }

statPOTSFSMsgRACFMsgCFUDeact	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of Remote Activation Call Forward deactivation 
		attempts that were successful on the reporting feature server"
	
	::=  {  statPOTSFSEntry  135  }

statPOTSFSMsgRACFMsgCFUUnchanged	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of Remote Activation Call Forward service 
		instances that were successful but resulted in no change to 
		the forwarding-to number on the reporting feature server"
	
	::=  {  statPOTSFSEntry  136  }

statPOTSFSMsgRACFPinAttempts	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of Remote Activation Call Forward PIN input 
		attempts on the reporting feature server"
	
	::=  {  statPOTSFSEntry  137  }

statPOTSFSMsgRACFPinRefused	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of Remote Activation Call Forward PIN input 
		attempts that were refused on the reporting feature server"
	
	::=  {  statPOTSFSEntry  138  }

statPOTSFSMsgRACFPinRejectNoRsrcs	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of Remote Activation Call Forward PIN input 
		attempts that were refused due to a lack of resources on the 
		reporting feature server"
	
	::=  {  statPOTSFSEntry  139  }

statPOTSFSMsgRACFPinChanged	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of Remote Activation Call Forward PIN input 
		attempts that resulted in a change to the previous PIN for 
		that subscriber on the reporting feature server"
	
	::=  {  statPOTSFSEntry  140  }

statPOTSFSMsgRACFPinUnchanged	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of Remote Activation Call Forward PIN input 
		attempts that resulted in no change to the previous PIN for 
		that subscriber on the reporting feature server"
	
	::=  {  statPOTSFSEntry  141  }

statPOTSFSMsgACActivationAttempts	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of Automatic Callback service activation attempts 
		on the reporting feature server"
	
	::=  {  statPOTSFSEntry  142  }

statPOTSFSMsgACOverflows	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of Automatic Callback service activation attempts 
		resulting in an overflow on the reporting feature server"
	
	::=  {  statPOTSFSEntry  143  }

statPOTSFSMsgACImmediateProcessing	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of Automatic Callback service activation attempts 
		that resulted in immediate connection on the reporting 
		feature server"
	
	::=  {  statPOTSFSEntry  144  }

statPOTSFSMsgACDelayedProcessing	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of Automatic Callback service activation attempts 
		that resulted in delayed connection on the reporting 
		feature server"
	
	::=  {  statPOTSFSEntry  145  }

statPOTSFSMsgACDeactivatedBySystem	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of Automatic Callback service activation attempts 
		that were deactivated by the system on the reporting 
		feature server"
	
	::=  {  statPOTSFSEntry  146  }

statPOTSFSMsgACDeactivationAttempts	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of Automatic Callback service activation attempts 
		that were deactivated by the requesting subscriber on the 
		reporting feature server"
	
	::=  {  statPOTSFSEntry  147  }

statPOTSFSMsgACInterlataAttempts	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of Automatic Callback service activation attempts 
		performed on an interlata basis on the reporting feature server"
	
	::=  {  statPOTSFSEntry  148  }

statPOTSFSMsgARActivationAttempts	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of Automatic Recall service activation attempts 
		on the reporting feature server"
	
	::=  {  statPOTSFSEntry  149  }

statPOTSFSMsgAROverflows	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of Automatic Recall service activation attempts 
		resulting in an overflow on the reporting feature server"
	
	::=  {  statPOTSFSEntry  150  }

statPOTSFSMsgARImmediateProcessing	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of Automatic Recall service activation attempts 
		that resulted in immediate connection on the reporting 
		feature server"
	
	::=  {  statPOTSFSEntry  151  }

statPOTSFSMsgARDelayedProcessing	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of Automatic Recall service activation attempts 
		that resulted in delayed connection on the reporting feature 
		server"
	
	::=  {  statPOTSFSEntry  152  }

statPOTSFSMsgARDeactivatedBySys	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of Automatic Recall service activation attempts 
		that were deactivated by the system on the reporting feature 
		server"
	
	::=  {  statPOTSFSEntry  153  }

statPOTSFSMsgARDeactivationAttmp	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of Automatic Recall service activation attempts 
		that were deactivated by the requesting subscriber on the 
		reporting feature server"
	
	::=  {  statPOTSFSEntry  154  }

statPOTSFSMsgARInterlataAttempts	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of Automatic Recall service activation attempts 
		performed on an interlata basis on the reporting feature server"
	
	::=  {  statPOTSFSEntry  155  }

statPOTSFSMsgACARTQueuedRequests	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of Automatic Callback and Automatic Recall service 
		requests that were queued on the reporting feature server"
	
	::=  {  statPOTSFSEntry  156  }

statPOTSFSMsgACARTTermScanReqs	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of Automatic Callback and Automatic Recall service 
		requests that were queued for terminators on the reporting 
		feature server"
	
	::=  {  statPOTSFSEntry  157  }

statPOTSFSMsgACARTOrigScanReqs	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of Automatic Callback and Automatic Recall service 
		requests that were queued for originators on the reporting 
		feature server"
	
	::=  {  statPOTSFSEntry  158  }

statPOTSFSMsgACARTRejectNoResrcs	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of Automatic Callback and Automatic Recall service 
		requests that were rejected due to a lack of resources on the 
		reporting feature server"
	
	::=  {  statPOTSFSEntry  159  }

statPOTSFSCTXMsgSFGCounterOverflow	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of Centrex SFG counters that overflowed during the 
		collection interval on the reporting feature server"
	
	::=  {  statPOTSFSEntry  160  }

statPOTSFSMsgACRActAttempts	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of Automatic Call Return activation attempts 
		during the collection interval"
	
	::=  {  statPOTSFSEntry  161  }

statPOTSFSMsgACRDeactAttempts	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of Automatic Call Return deactivation attempts 
		during the collection interval"
	
	::=  {  statPOTSFSEntry  162  }

statPOTSFSMsgACRActRejectNoRsrcs	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of Automatic Call Return activation attempts that 
		failed due to a lack of resources during the collection 
		interval"
	
	::=  {  statPOTSFSEntry  163  }

statPOTSFSMsgACRDeactRejectNoRsrcs	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of Automatic Call Return deactivation attempts 
		during the collection interval"
	
	::=  {  statPOTSFSEntry  164  }

statPOTSFSMsgACRSucc	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of Automatic Call Return attempts that were 
		successful during the collection interval"
	
	::=  {  statPOTSFSEntry  165  }

statPOTSFSMsgDNDActSucc	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"TBD"
	
	::=  {  statPOTSFSEntry  166  }

statPOTSFSMsgDNDActFailed OBJECT-TYPE
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"TBD"
	
	::=  {  statPOTSFSEntry  167  }

statPOTSFSMsgDNDDeactSucc	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"TBD"
	
	::=  {  statPOTSFSEntry  168  }

statPOTSFSMsgDNDDeactFailed OBJECT-TYPE
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"TBD"
	
	::=  {  statPOTSFSEntry  169  }

statPOTSFSMsgDNDReject	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"TBD"
	
	::=  {  statPOTSFSEntry  170  }

statPOTSFSCTXMsgCParkSuccAttempts	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of Call Park Attempts that were successful during 
		the collection interval"
	
	::=  {  statPOTSFSEntry  171  }

statPOTSFSCTXMsgCParkFailAttempts	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of Call Park Attempts that failed during the 
		collection interval"
	
	::=  {  statPOTSFSEntry  172  }

statPOTSFSCTXMsgCParkSuccRtrvAttempts	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of Call Park Retrieval Attempts that were 
		successful during the collection interval"
	
	::=  {  statPOTSFSEntry  173  }

statPOTSFSCTXMsgCParkFailRtrvAttempts	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of Call Park Retrieval Attempts that failed during 
		the collection interval"
	
	::=  {  statPOTSFSEntry  174  }

statPOTSFSCTXMsgCParkFwded	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of Call Park Attempts to forward a call during the 
		collection interval"
	
	::=  {  statPOTSFSEntry  175  }

statPOTSFSCTXMsgCParkClred	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of Call Park Attempts to clear during the 
		collection interval"
	
	::=  {  statPOTSFSEntry  176  }

statPOTSFSCTXMsgSC1DgtAttempts	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of Speed Call 1 digit attempts during the 
		collection interval"
	
	::=  {  statPOTSFSEntry  177  }

statPOTSFSCTXMsgSC2DgtAttempts	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of Speed Call 2 digit attempts during the 
		collection interval"
	
	::=  {  statPOTSFSEntry  178  }

statPOTSFSCTXMsgSCSuccCCSCAttempts	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of CCSC successful attempts during the collection 
		interval"
	
	::=  {  statPOTSFSEntry  179  }

statPOTSFSMsgCNDBAttempts	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"TBD"

--		"Number of times Calling Number Delivery Block feature was 
--		actived"
	
	::=  {  statPOTSFSEntry  180  }

statPOTSFSMsgCNABAttempts	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"TBD"

--		"Number of times Calling Name Block feature was activated"
	
	::=  {  statPOTSFSEntry  181  }

statPOTSFSMsgCIDSAttempts	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"TBD"

--		"Number times Calling Identity Delivery feature as activated"
	
	::=  {  statPOTSFSEntry  182  }

statPOTSFSMsgCIDSSAttempts	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"TBD"

--		"Number of times Calling Identity Delivery Suppression 
--		feature was activated"
	
	::=  {  statPOTSFSEntry  183  }

statPOTSFSSIPMsgProvRSPRETRANRcv	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of SIP provisioning response retransmission 
		messages the reporting call agent or feature server received"
	
	::=  {  statPOTSFSEntry  184 }

statPOTSFSSIPMsgProvRSPRETRANXmit	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of SIP provisioning response retransmission 
		messages the reporting call agent or feature server sent"
	
	::=  {  statPOTSFSEntry  185 }

statPOTSFSSIPMsgPRACKRcv	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of SIP PRACK messages the reporting call agent or 
		feature server received"
	
	::=  {  statPOTSFSEntry  186 }

statPOTSFSSIPMsgPRACKXmit	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of SIP PRACK messages the reporting call agent 
		or feature server sent"
	
	::=  {  statPOTSFSEntry  187 }

statPOTSFSSIPMsgSUBSCRIBERcv	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of SIP SUBSCRIBE messages the reporting call 
		agent or feature server received"
	
	::=  {  statPOTSFSEntry  188 }

statPOTSFSSIPMsgSUBSCRIBEXmit	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of SIP SUBSCRIBE messages the reporting call 
		agent or feature server sent"
	
	::=  {  statPOTSFSEntry  189 }

statPOTSFSSIPMsgREFERRcv	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of SIP REFER messages the reporting call agent or 
		feature server received"
	
	::=  {  statPOTSFSEntry  190 }

statPOTSFSSIPMsgREFERXmit	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of SIP REFER messages the reporting call agent or 
		feature server sent"
	
	::=  {  statPOTSFSEntry  191 }

statPOTSFSSIPMsgREFERREPLACESRcv	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of SIP REFER REPLACES messages the reporting call 
		agent or feature server received"
	
	::=  {  statPOTSFSEntry  192 }

statPOTSFSSIPMsgINVITEREPLACESXmit	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of SIP INVITE REPLACES messages the reporting call 
		agent or feature server sent"
	
	::=  {  statPOTSFSEntry  193 }

statPOTSFSSIPMsgINVITEREPLACESRcv	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of SIP INVITE REPLACES messages the reporting call 
		agent or feature server received"
	
	::=  {  statPOTSFSEntry  194 }

statPOTSFSSIPMsgREL100Rcv	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of REL100 class (TRYING) messages the reporting 
		call agent or feature server received"
	
	::=  {  statPOTSFSEntry  195 }

statPOTSFSSIPMsgREL100Xmit	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of REL100 class (TRYING) messages the reporting 
		call agent or feature server sent"
	
	::=  {  statPOTSFSEntry  196 }

statPOTSFSSIPMsgUNSUPPORTEDRcv	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of unsupported SIP messages the reporting call 
		agent or feature server received"
	
	::=  {  statPOTSFSEntry  197 }

statPOTSFSMsgRCSucc	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of Return Call attempts that were successful 
		during the collection interval"
	
	::=  {  statPOTSFSEntry  198 }

statPOTSFSMsgCWDActSucc	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of Call Waiting Deluxe successful service 
		activation attempts on the reporting feature server"
	
	::=  {  statPOTSFSEntry  199 }

statPOTSFSMsgCWDDeactSucc	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of Call Waiting Deluxe successful service 
		deactivation attempts on the reporting feature server"
	
	::=  {  statPOTSFSEntry  200 }

statPOTSFSMsgCWDInterrogationSucc	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of Call Waiting Deluxe successful service 
		interrogation attempts on the reporting feature server"
	
	::=  {  statPOTSFSEntry  201 }

statPOTSFSMsgCWDActFail	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of Call Waiting Deluxe unsuccessful service 
		activation attempts on the reporting feature server"
	
	::=  {  statPOTSFSEntry  202 }

statPOTSFSMsgCWDDeactFail	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of Call Waiting Deluxe unsuccessful service 
		deactivation attempts on the reporting feature server"
	
	::=  {  statPOTSFSEntry  203 }

statPOTSFSMsgCWDInterrogationFail	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of Call Waiting Deluxe unsuccessful service 
		interrogation attempts on the reporting feature server"
	
	::=  {  statPOTSFSEntry  204 }

statPOTSFSMsgCWDAttempts	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of Call Waiting Deluxe service instance attempts 
		on the reporting feature server"
	
	::=  {  statPOTSFSEntry  205 }

statPOTSFSMsgCWDAnswered	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of Call Waiting Deluxe service instance attempts 
		answered by the called party on the reporting feature server"
	
	::=  {  statPOTSFSEntry  206 }

statPOTSFSMsgTWCDAttempts	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of Three Way Calling Deluxe service instance 
		attempts on the reporting feature server"
	
	::=  {  statPOTSFSEntry  207 }

statPOTSFSMsgTWCDConferenced	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of Three Way Calling Deluxe service instance 
		conferencing attempts on the reporting feature server"
	
	::=  {  statPOTSFSEntry  208 }

statPOTSFSMsgHOTVAttempts	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of successful Hotline Variable instance attempts 
		on the reporting feature server"
	
	::=  {  statPOTSFSEntry  209 }

statPOTSFSMsgHOTVActSucc	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of successful Hotline Variable instance attempts 
		on the reporting feature server"
	
	::=  {  statPOTSFSEntry  210 }

statPOTSFSMsgHOTVDeactSucc	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of successful Hotline Variable deactivation 
		attempts on the reporting feature server"
	
	::=  {  statPOTSFSEntry  211 }

statPOTSFSMsgHOTVInterrogationSucc	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of successful Hotline Variable deactivation 
		attempts on the reporting feature server"
	
	::=  {  statPOTSFSEntry  212 }

statPOTSFSMsgOCBLocalBlocked	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of local calls that were blocked on the reporting 
		feature server via Outward Call Barring"
	
	::=  {  statPOTSFSEntry  213 }

statPOTSFSMsgOCBNatlBlocked	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of national calls that were blocked on the 
		reporting feature server via Outward Call Barring"
	
	::=  {  statPOTSFSEntry  214 }

statPOTSFSMsgOCBIntlBlocked	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of international calls that were blocked on the 
		reporting feature server via Outward Call Barring"
	
	::=  {  statPOTSFSEntry  215 }

statPOTSFSMsgOCBInvocations	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of Outward Call Barring invocation attempts on the 
		reporting feature server"
	
	::=  {  statPOTSFSEntry  216 }

statPOTSFSMsgOCBActSucc	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of Outward Call Barring invocation attempts on 
		the reporting feature server"
	
	::=  {  statPOTSFSEntry  217 }

statPOTSFSMsgOCBDeactivSucc	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of Outward Call Barring successful deactivation 
		attempts on the reporting feature server"
	
	::=  {  statPOTSFSEntry  218 }

statPOTSFSMsgOCBInterrogationSucc	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of Outward Call Barring successful interrogation 
		attempts on the reporting feature server"
	
	::=  {  statPOTSFSEntry  219 }

statPOTSFSMsgOCBInvalidPasswd	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of Outward Call Barring attempts that were 
		unsuccessful due to invalid password entry by the user on 
		the reporting feature server"
	
	::=  {  statPOTSFSEntry  220 }

statPOTSFSMsgCFUInterrogationAttempts	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of Call Forward Unconditional interrogation 
		attempts on the reporting feature server"
	
	::=  {  statPOTSFSEntry  221 }

statPOTSFSMsgCFBInterrogationAttempts	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of Call Forward Busy interrogation attempts on 
		the reporting feature server"
	
	::=  {  statPOTSFSEntry  222 }

statPOTSFSMsgCFNAInterrogationAttempts	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of Call Forward No Answer interrogation attempts 
		on the reporting feature server"
	
	::=  {  statPOTSFSEntry  223 }

statPOTSFSSIPMsgUPDATERcv	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of SIP UPDATE messages the reporting call agent 
		or feature server received"
	
	::=  {  statPOTSFSEntry  224 }

statPOTSFSSIPMsgUPDATEXmit	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of SIP UPDATE messages the reporting call agent 
		or feature server sent"
	
	::=  {  statPOTSFSEntry  225 }

statPOTSFSSIPMsgREFERWREPLACESRcv	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"hereitis"
	
	::=  {  statPOTSFSEntry  226 }

statPOTSFSSIPMsgMWINotifyXmit	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"hereitis"
	
	::=  {  statPOTSFSEntry  227 }

statPOTSFSSIPMsgMWINotifyXmitFail	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"hereitis"
	
	::=  {  statPOTSFSEntry  228 }

statPOTSFSSIPMsgMWINotifyRcv	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"hereitis"
	
	::=  {  statPOTSFSEntry  229 }

statPOTSFSREFERAttmp	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"hereitis"
	
	::=  {  statPOTSFSEntry  230 }

statPOTSFSREFERFail	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"hereitis"
	
	::=  {  statPOTSFSEntry  231 }

statPOTSFSREFERSucc	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"hereitis"
	
	::=  {  statPOTSFSEntry  232 }

statPOTSFSTotalCNAMQuery	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"hereitis"
	
	::=  {  statPOTSFSEntry  233 }

statPOTSFSExtCNAMQuery	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"hereitis"
	
	::=  {  statPOTSFSEntry  234 }

statPOTSFSExtCNAMQuerySucc	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"hereitis"
	
	::=  {  statPOTSFSEntry  235 }

statPOTSFSExtCNAMFailApp	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"hereitis"
	
	::=  {  statPOTSFSEntry  236 }

statPOTSFSExtCNAMFailNetw	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"hereitis"
	
	::=  {  statPOTSFSEntry  237 }

statPOTSFSAR2LevelACCCodeAttmp	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"hereitis"
	
	::=  {  statPOTSFSEntry  238 }

statPOTSFSAR2LevelACTCodeAttmp	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"hereitis"
	
	::=  {  statPOTSFSEntry  239 }

statPCTToolsTable	OBJECT-TYPE
	SYNTAX	SEQUENCE  OF  StatPCTToolsEntry
	MAX-ACCESS	not-accessible
	STATUS	current
 	DESCRIPTION
		"Metrics related to invocations of the LIDB Query Verification Tools."
	::=  { fsPotsCtxStatistics  2 }

statPCTToolsEntry	OBJECT-TYPE
	SYNTAX	StatPCTToolsEntry
	MAX-ACCESS	not-accessible
	STATUS	current
 	DESCRIPTION
		"Row description for metrics related to invocations of the LIDB Query 
		Verification Tools statistics Table."
	INDEX	{  statPCTToolsComponentID  }
	::=  { statPCTToolsTable 1 }

StatPCTToolsEntry  ::=  SEQUENCE {
	statPCTToolsComponentID  DisplayString,
	statPCTToolsDOW  DayOfWeek,
	statPCTToolsTOD  TimeOfDay,
	statPCTToolsLIDBQueryAttmp		Counter32,
	statPCTToolsLIDBQuerySucc		Counter32
	}
statPCTToolsComponentID	OBJECT-TYPE 
	SYNTAX	DisplayString 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"PCT Tools Component Identifier"
	
	::=  {  statPCTToolsEntry  1  }

statPCTToolsDOW	OBJECT-TYPE 
	SYNTAX	DayOfWeek 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"Day of week statistics was collected."
	
	::=  {  statPCTToolsEntry  2  }

statPCTToolsTOD	OBJECT-TYPE 
	SYNTAX	TimeOfDay 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"Time of day statistics was collected in XX minutes interval"
	
	::=  {  statPCTToolsEntry  3  }

statPCTToolsLIDBQueryAttmp	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of times the reporting feature server received a 
		request to perform an LIDB query from the QVT tool."

	::=  {  statPCTToolsEntry  4  }

statPCTToolsLIDBQuerySucc	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of times the reporting feature server received a 
		request to perform an LIDB query from the QVT tool and completed it 
		successfully."

	::=  {  statPCTToolsEntry  5  }

statMGCPAdapterTable	OBJECT-TYPE
	SYNTAX	SEQUENCE  OF  StatMGCPAdapterEntry
	MAX-ACCESS	not-accessible
	STATUS	current
 	DESCRIPTION
		"MGCP Adapter Statistics."
	::=  { callAgentStatistics  9 }

statMGCPAdapterEntry	OBJECT-TYPE
	SYNTAX	StatMGCPAdapterEntry
	MAX-ACCESS	not-accessible
	STATUS	current
 	DESCRIPTION
		"Row description for MGCP Adapter Statistics Table."
	INDEX	{  statMGCPAdaptComponentID  }
	::=  { statMGCPAdapterTable 1 }

StatMGCPAdapterEntry  ::=  SEQUENCE {
	statMGCPAdaptComponentID  DisplayString,
	statMGCPAdaptDOW  DayOfWeek,
	statMGCPAdaptTOD  TimeOfDay,
	statMGCPAdaptDecodeErr  Counter32,
	statMGCPAdaptEncodeErr  Counter32,
	statMGCPAdaptUnreachable  Counter32,
	statMGCPAdaptSendErrors  Counter32,
	statMGCPAdaptCRCXAckRecv  Counter32,
	statMGCPAdaptCRCXNackRecv  Counter32,
	statMGCPAdaptCRCXSent  Counter32,
	statMGCPAdaptMDCXAckRecv  Counter32,
	statMGCPAdaptMDCXNackRecv  Counter32,
	statMGCPAdaptMDCXSent  Counter32,
	statMGCPAdaptDLCXRecv  Counter32,
	statMGCPAdaptDLCXSent  Counter32,
	statMGCPAdaptDLCXAckRecv  Counter32,
	statMGCPAdaptDLCXNackRecv  Counter32,
	statMGCPAdaptRQNTAckRecv  Counter32,
	statMGCPAdaptRQNTNackRecv  Counter32,
	statMGCPAdaptRQNTSent  Counter32,
	statMGCPAdaptAUEPAckRecv  Counter32,
	statMGCPAdaptAUEPNackRecv  Counter32,
	statMGCPAdaptAUEPSent  Counter32,
	statMGCPAdaptNTFYRecv  Counter32,
	statMGCPAdaptRSIPRecv  Counter32,
	statMGCPAdaptRSIPAckSent  Counter32
	}

statMGCPAdaptComponentID	OBJECT-TYPE 
	SYNTAX	DisplayString 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"MGCP Adapter Component Identifier"
	
	::=  {  statMGCPAdapterEntry  1  }

statMGCPAdaptDOW	OBJECT-TYPE 
	SYNTAX	DayOfWeek 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"Day of week statistics was collected."
	
	::=  {  statMGCPAdapterEntry  2  }

statMGCPAdaptTOD	OBJECT-TYPE 
	SYNTAX	TimeOfDay 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"Time of day statistics was collected in XX minutes interval"
	
	::=  {  statMGCPAdapterEntry  3  }

statMGCPAdaptDecodeErr	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of MGCP messages received that failed decoding on 
		the reporting call agent"
	
	::=  {  statMGCPAdapterEntry  4  }

statMGCPAdaptEncodeErr	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of MGCP messages to be sent that failed encoding 
		on the reporting call agent"
	
	::=  {  statMGCPAdapterEntry  5  }

statMGCPAdaptUnreachable	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of MGCP messages sent from the reporting call 
		agent that failed due to the target gateway being unreachable"
	
	::=  {  statMGCPAdapterEntry  6  }

statMGCPAdaptSendErrors	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of MGCP messages sent from the reporting call 
		agent that failed while being sent to the target gateway"
	
	::=  {  statMGCPAdapterEntry  7  }

statMGCPAdaptCRCXAckRecv	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of MGCP CRCX acknowledgement messages received by 
		the reporting call agent"
	
	::=  {  statMGCPAdapterEntry  8  }

statMGCPAdaptCRCXNackRecv	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of MGCP CRCX non-acknowledgement messages received 
		by the reporting call agent"
	
	::=  {  statMGCPAdapterEntry  9  }

statMGCPAdaptCRCXSent	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of MGCP CRCX messages sent by the reporting call 
		agent"
	
	::=  {  statMGCPAdapterEntry  10  }

statMGCPAdaptMDCXAckRecv	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of MGCP MDCX acknowledgement messages received by 
		the reporting call agent"
	
	::=  {  statMGCPAdapterEntry  11  }

statMGCPAdaptMDCXNackRecv	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of MGCP MDCX non-acknowledgement messages received 
		by the reporting call agent"
	
	::=  {  statMGCPAdapterEntry  12  }

statMGCPAdaptMDCXSent	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of MGCP MDCX non-acknowledgement messages received 
		by the reporting call agent"
	
	::=  {  statMGCPAdapterEntry  13  }

statMGCPAdaptDLCXRecv	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of MGCP DLCX messages received from gateways by 
		the reporting call agent"
	
	::=  {  statMGCPAdapterEntry  14  }

statMGCPAdaptDLCXSent	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of MGCP DLCX messages sent by the reporting call 
		agent"
	
	::=  {  statMGCPAdapterEntry  15  }

statMGCPAdaptDLCXAckRecv	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of MGCP DLCX acknowledgement messages received by 
		the reporting call agent"
	
	::=  {  statMGCPAdapterEntry  16  }

statMGCPAdaptDLCXNackRecv	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of MGCP DLCX non-acknowledgement messages received 
		by the reporting call agent"
	
	::=  {  statMGCPAdapterEntry  17  }

statMGCPAdaptRQNTAckRecv	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of MGCP RQNT acknowledgement messages received by 
		the reporting call agent"
	
	::=  {  statMGCPAdapterEntry  18  }

statMGCPAdaptRQNTNackRecv	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of MGCP RQNT acknowledgement messages received 
		by the reporting call agent"
	
	::=  {  statMGCPAdapterEntry  19  }

statMGCPAdaptRQNTSent	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of MGCP RQNT messages sent by the reporting call 
		agent"
	
	::=  {  statMGCPAdapterEntry  20  }

statMGCPAdaptAUEPAckRecv	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of MGCP AUEP acknowledgement messages received by 
		the reporting call agent"
	
	::=  {  statMGCPAdapterEntry  21  }

statMGCPAdaptAUEPNackRecv	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of MGCP AUEP non-acknowledgement messages received 
		by the reporting call agent"
	
	::=  {  statMGCPAdapterEntry  22  }

statMGCPAdaptAUEPSent	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of MGCP AUEP messages sent by the reporting call 
		agent"
	
	::=  {  statMGCPAdapterEntry  23  }

statMGCPAdaptNTFYRecv	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of MGCP NTFY messages received from gateways by 
		the reporting call agent"
	
	::=  {  statMGCPAdapterEntry  24  }


statMGCPAdaptRSIPRecv	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of MGCP RSIP messages received from gateways by 
		the reporting call agent"
	
	::=  {  statMGCPAdapterEntry  25  }

statMGCPAdaptRSIPAckSent	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of MGCP RSIP acknowledgement messages sent by the 
		reporting call agent"
	
	::=  {  statMGCPAdapterEntry  26  }

statSIMTable	OBJECT-TYPE
	SYNTAX	SEQUENCE  OF  StatSIMEntry
	MAX-ACCESS	not-accessible
	STATUS	current
 	DESCRIPTION
		"SIM Statistics."
	::=  { callAgentStatistics  1 }

statSIMEntry	OBJECT-TYPE
	SYNTAX	StatSIMEntry
	MAX-ACCESS	not-accessible
	STATUS	current
 	DESCRIPTION
		"Row description for SIM Statistics Table."
	INDEX	{  statSIMComponentID  }
	::=  { statSIMTable 1 }

StatSIMEntry  ::=  SEQUENCE {
	statSIMComponentID  DisplayString,
	statSIMDOW  DayOfWeek,
	statSIMTOD  TimeOfDay,
	statSIMSIPIncomingMsg  Counter32,
	statSIMSIPIncomingMsgSucc  Counter32,
	statSIMSIPOutgoingMsg  Counter32,
	statSIMSIPOutgoingMsgSucc  Counter32,
	statSIMSIPMsgREQRETRANRcv  Counter32,
	statSIMSIPMsgREQRETRANXmit  Counter32,
	statSIMSIPMsgRSPRETRANRcv  Counter32,
	statSIMSIPMsgRSPRETRANXmit  Counter32,
	statSIMSIPT1TimerExpired  Counter32,
	statSIMSIPT2TimerReached  Counter32,
	statSIMSIPMsgINVITERcv  Counter32,
	statSIMSIPMsgINVITEXmit  Counter32,
	statSIMSIPMsgCANCELRcv  Counter32,
	statSIMSIPMsgCANCELXmit  Counter32,
	statSIMSIPMsgBYERcv  Counter32,
	statSIMSIPMsgBYEXmit  Counter32,
	statSIMSIPMsgACKRcv  Counter32,
	statSIMSIPMsgACKXmit  Counter32,
	statSIMSIPMsgOPTIONRcv  Counter32,
	statSIMSIPMsgOPTIONXmit  Counter32,
	statSIMSIPMsgREGISTERRcv  Counter32,
	statSIMSIPMsgREGISTERXmit  Counter32,
	statSIMSIPMsgINFORcv  Counter32,
	statSIMSIPMsgINFOXmit  Counter32,
	statSIMSIPMsgNotifyRcv  Counter32,
	statSIMSIPMsgNotifyXmit  Counter32,
	statSIMSIP100Rcv  Counter32,
	statSIMSIP100Xmit  Counter32,
	statSIMSIP18xRcv  Counter32,
	statSIMSIP18xXmit  Counter32,
	statSIMSIP200Rcv  Counter32,
	statSIMSIP200Xmit  Counter32,
	statSIMSIP3xxRcv  Counter32,
	statSIMSIP3xxXmit  Counter32,
	statSIMSIP4xxRcv  Counter32,
	statSIMSIP4xxXmit  Counter32,
	statSIMSIP5xxRcv  Counter32,
	statSIMSIP5xxXmit  Counter32,
	statSIMSIP6xxRcv  Counter32,
	statSIMSIP6xxXmit  Counter32,
	statSIMSIP7xxRcv  Counter32,
	statSIMSIP7xxXmit  Counter32,
	statSIMBCMMsgRcv  Counter32,
	statSIMNewRelationsOpened  Counter32,
	statSIMMsgTDPNsRcv  Counter32,
	statSIMMsgTDPRsRcv  Counter32,
	statSIMMsgEDPNsRcv  Counter32,
	statSIMMsgEDPRsRcv  Counter32,
	statSIMMsgINSTRUCTXmitToBCM  Counter32,
	statSIMMsgINSTRUCTRcvToBCM	Counter32,
	statSIMMsgTERMINATIONRcv  Counter32,
	statSIMMsgTERMINATIONXmit  Counter32,
	statSIMMsgFSRcv  Counter32,
	statSIMMsgFSXmit  Counter32,
	statSIMMsgFSPingXmit  Counter32,
	statSIMMsgFSPingNoReponse  Counter32,
	statSIMMsgCARestartXmit  Counter32,
	statSIMCAAsyncMsgsXmit  Counter32,
	statSIMSIPMsgProvRSPRETRANRcv	Counter32,
	statSIMSIPMsgProvRSPRETRANXmit	Counter32,
	statSIMSIPMsgPRACKRcv	Counter32,
	statSIMSIPMsgPRACKXmit	Counter32,
	statSIMSIPMsgSUBSCRIBERcv	Counter32,
	statSIMSIPMsgSUBSCRIBEXmit	Counter32,
	statSIMSIPMsgREFERRcv	Counter32,
	statSIMSIPMsgREFERXmit	Counter32,
	statSIMSIPMsgREFERREPLACESRcv	Counter32,
	statSIMSIPMsgINVITEREPLACESXmit	Counter32,
	statSIMSIPMsgINVITEREPLACESRcv	Counter32,
	statSIMSIPMsgREL100Rcv	Counter32,
	statSIMSIPMsgREL100Xmit	Counter32,
	statSIMSIPMsgUNSUPPORTEDRcv	Counter32,
	statSIMSIPMsgUPDATERcv	Counter32,
	statSIMSIPMsgUPDATEXmit	Counter32,
	statSIMSIPMsgREFERWREPLACESRcv	Counter32,
	statSIMSIPMsgMWINotifyXmit	Counter32,
	statSIMSIPMsgMWINotifyXmitFail	Counter32,
	statSIMSIPMsgMWINotifyRcv	Counter32
	}

statSIMComponentID	OBJECT-TYPE 
	SYNTAX	DisplayString 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"SIM Component Identifier"
	
	::=  {  statSIMEntry  1  }

statSIMDOW	OBJECT-TYPE 
	SYNTAX	DayOfWeek 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"Day of week statistics was collected."
	
	::=  {  statSIMEntry  2  }

statSIMTOD	OBJECT-TYPE 
	SYNTAX	TimeOfDay 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"Time of day statistics was collected in XX minutes interval"
	
	::=  {  statSIMEntry  3  }


statSIMSIPIncomingMsg	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of SIP messages the reporting call agent or 
		feature server attempted to receive"
	
	::=  {  statSIMEntry  4  }

statSIMSIPIncomingMsgSucc	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of SIP messages the reporting call agent or 
		feature server successfully received"
	
	::=  {  statSIMEntry  5  }

statSIMSIPOutgoingMsg	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of SIP messages the reporting call agent or 
		feature server attempted to send"
	
	::=  {  statSIMEntry  6  }

statSIMSIPOutgoingMsgSucc	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of SIP messages the reporting call agent or 
		feature server successfully sent"
	
	::=  {  statSIMEntry  7  }

statSIMSIPMsgREQRETRANRcv	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of SIP request retransmission messages the 
		reporting call agent or feature server received"
	
	::=  {  statSIMEntry  8  }

statSIMSIPMsgREQRETRANXmit	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of SIP request retransmission messages the 
		reporting call agent or feature server sent"
	
	::=  {  statSIMEntry  9  }

statSIMSIPMsgRSPRETRANRcv	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of SIP response retransmission messages the 
		reporting call agent or feature server received"
	
	::=  {  statSIMEntry  10  }

statSIMSIPMsgRSPRETRANXmit	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of SIP response retransmission messages the 
		reporting call agent or feature server sent"
	
	::=  {  statSIMEntry  11  }

statSIMSIPT1TimerExpired	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of SIP T1 Timer expirations that occurred on the 
		reporting call agent or feature server received over the 
		collection interval"
	
	::=  {  statSIMEntry  12  }

statSIMSIPT2TimerReached	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of SIP T2 Timer expirations that occurred on the 
		reporting call agent or feature server received over the 
		collection interval"
	
	::=  {  statSIMEntry  13  }

statSIMSIPMsgINVITERcv	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of SIP INVITE messages the reporting call agent 
		or feature server received"
	
	::=  {  statSIMEntry  14  }

statSIMSIPMsgINVITEXmit	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of SIP INVITE messages the reporting call agent 
		or feature server sent"
	
	::=  {  statSIMEntry  15  }

statSIMSIPMsgCANCELRcv	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of SIP CANCEL messages the reporting call agent 
		or feature server received"
	
	::=  {  statSIMEntry  18  }

statSIMSIPMsgCANCELXmit	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of SIP CANCEL messages the reporting call agent 
		or feature server sent"
	
	::=  {  statSIMEntry  19  }

statSIMSIPMsgBYERcv	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of SIP BYE messages the reporting call agent 
		or feature server received"
	
	::=  {  statSIMEntry  20  }

statSIMSIPMsgBYEXmit	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of SIP BYE messages the reporting call agent 
		or feature server sent"
	
	::=  {  statSIMEntry  21  }

statSIMSIPMsgACKRcv	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of SIP ACK messages the reporting call agent 
		or feature server received"
	
	::=  {  statSIMEntry  22  }

statSIMSIPMsgACKXmit	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of SIP ACK messages the reporting call agent 
		or feature server sent"
	
	::=  {  statSIMEntry  23  }

statSIMSIPMsgOPTIONRcv	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of SIP OPTIONS messages the reporting call agent 
		or feature server received"
	
	::=  {  statSIMEntry  24  }

statSIMSIPMsgOPTIONXmit	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of SIP OPTIONS messages the reporting call agent 
		or feature server sent"
	
	::=  {  statSIMEntry  25  }

statSIMSIPMsgREGISTERRcv	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of SIP REGISTER messages the reporting call agent 
		or feature server received"
	
	::=  {  statSIMEntry  26  }

statSIMSIPMsgREGISTERXmit	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of SIP REGISTER messages the reporting call agent 
		or feature server sent"
	
	::=  {  statSIMEntry  27  }

statSIMSIPMsgINFORcv	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of SIP INFO messages the reporting call agent or 
		feature server received"
	
	::=  {  statSIMEntry  28  }

statSIMSIPMsgINFOXmit	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of SIP INFO messages the reporting call agent or 
		feature server sent"
	
	::=  {  statSIMEntry  29  }


statSIMSIPMsgNotifyRcv	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of SIP NOTIFY messages the reporting call agent or 
		feature server received"
	
	::=  {  statSIMEntry  30  }

statSIMSIPMsgNotifyXmit	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of SIP NOTIFY messages the reporting call agent or 
		feature server sent"
	
	::=  {  statSIMEntry  31  }

statSIMSIP100Rcv	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of 100 class (TRYING) messages the reporting 
		call agent or feature server received"
	
	::=  {  statSIMEntry  32  }

statSIMSIP100Xmit	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of 100 class (TRYING) messages the reporting 
		call agent or feature server sent"
	
	::=  {  statSIMEntry  33  }

statSIMSIP18xRcv	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of 18x class (INFORMATIONAL) messages the 
		reporting call agent or feature server received"
	
	::=  {  statSIMEntry  34  }

statSIMSIP18xXmit	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of 18x class (INFORMATIONAL) messages the 
		reporting call agent or feature server sent"
	
	::=  {  statSIMEntry  35  }

statSIMSIP200Rcv	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of 200 class (SUCCESS) messages the reporting 
		call agent or feature server received"
	
	::=  {  statSIMEntry  36  }

statSIMSIP200Xmit	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of 200 class (SUCCESS) messages the reporting 
		call agent or feature server received"
	
	::=  {  statSIMEntry  37  }

statSIMSIP3xxRcv	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of 3xx class (REDIRECTION) messages the reporting 
		call agent or feature server received"
	
	::=  {  statSIMEntry  38  }

statSIMSIP3xxXmit	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of 3xx class (REDIRECTION) messages the reporting 
		call agent or feature server sent"
	
	::=  {  statSIMEntry  39  }

statSIMSIP4xxRcv	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of 4xx class (REQUEST FAILURES) messages the 
		reporting call agent or feature server received"
	
	::=  {  statSIMEntry  40  }

statSIMSIP4xxXmit	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of 4xx class (REQUEST FAILURES) messages the 
		reporting call agent or feature server sent"
	
	::=  {  statSIMEntry  41  }

statSIMSIP5xxRcv	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of 5xx class (SERVER FAILURES) messages the 
		reporting call agent or feature server received"
	
	::=  {  statSIMEntry  42  }

statSIMSIP5xxXmit	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of 5xx class (SERVER FAILURES) messages the 
		reporting call agent or feature server sent"
	
	::=  {  statSIMEntry  43  }

statSIMSIP6xxRcv	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of 6xx class (GLOBAL FAILURES) messages the 
		reporting call agent or feature server received"
	
	::=  {  statSIMEntry  44  }

statSIMSIP6xxXmit	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of 6xx class (GLOBAL FAILURES) messages the 
		reporting call agent or feature server sent"
	
	::=  {  statSIMEntry  45  }

statSIMSIP7xxRcv	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of 7xx class (RESERVED) messages the reporting 
		call agent or feature server received"
	
	::=  {  statSIMEntry  46  }

statSIMSIP7xxXmit	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of 7xx class (RESERVED) messages the reporting 
		call agent or feature server sent"
	
	::=  {  statSIMEntry  47  }

statSIMBCMMsgRcv	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of messages received by call processing from a 
		feature server in the reporting call agent"
	
	::=  {  statSIMEntry  48  }

statSIMNewRelationsOpened	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of TDP-Rs received from call processing by SIM in 
		the reporting call agent"
	
	::=  {  statSIMEntry  49  }

statSIMMsgTDPNsRcv	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of Trigger Detection Point messages received from 
		call processing in the reporting call agent that do not 
		require a response from the target feature server"
	
	::=  {  statSIMEntry  50  }

statSIMMsgTDPRsRcv	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of Trigger Detection Point messages received from 
		call processing in the reporting call agent that do require 
		a response from the target feature server"
	
	::=  {  statSIMEntry  51  }

statSIMMsgEDPNsRcv	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of Event Detection Point messages received from 
		call processing in the reporting call agent that do not 
		require a response from the target feature server"
	
	::=  {  statSIMEntry  52  }

statSIMMsgEDPRsRcv	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of Event Detection Point messages received from 
		call processing in the reporting call agent that do require a 
		response from the target feature server"
	
	::=  {  statSIMEntry  53  }

statSIMMsgINSTRUCTXmitToBCM	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of INSTRUCT messages sent to feature servers by 
		the reporting call agent"
	
	::=  {  statSIMEntry  54  }


statSIMMsgINSTRUCTRcvToBCM	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of INSTRUCT messages received from feature servers 
		by the reporting call agent"
	
	::=  {  statSIMEntry  55  }

statSIMMsgTERMINATIONRcv	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of TERMINATE messages received from feature 
		servers by the reporting call agent"
	
	::=  {  statSIMEntry  56  }

statSIMMsgTERMINATIONXmit	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of TERMINATE messages sent to feature servers by 
		the reporting call agent"
	
	::=  {  statSIMEntry  57  }

statSIMMsgFSRcv	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of FCP messages sent to feature servers by the 
		reporting call agent"
	
	::=  {  statSIMEntry  58  }

statSIMMsgFSXmit	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of FCP messages received from feature servers by 
		the reporting call agent"
	
	::=  {  statSIMEntry  59  }

statSIMMsgFSPingXmit	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of PING messages sent to feature servers by the 
		reporting call agent"
	
	::=  {  statSIMEntry  60  }

statSIMMsgFSPingNoReponse	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of times no response was received from the target feature server when sent a PING message by the reporting call agent"
	
	::=  {  statSIMEntry  61  }

statSIMMsgCARestartXmit	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of RESTART messages sent to feature servers by 
		the reporting call agent"
	
	::=  {  statSIMEntry  62  }

statSIMCAAsyncMsgsXmit	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of ASYNC messages sent to feature servers by the 
		reporting call agent"
	
	::=  {  statSIMEntry  63  }

statSIMSIPMsgProvRSPRETRANRcv	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of SIP provisioning response retransmission 
		messages the reporting call agent or feature server received"
	
	::=  {  statSIMEntry  64 }

statSIMSIPMsgProvRSPRETRANXmit	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of SIP provisioning response retransmission 
		messages the reporting call agent or feature server sent"
	
	::=  {  statSIMEntry  65 }

statSIMSIPMsgPRACKRcv	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of SIP PRACK messages the reporting call agent 
		or feature server received"
	
	::=  {  statSIMEntry  66 }

statSIMSIPMsgPRACKXmit	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of SIP PRACK messages the reporting call agent 
		or feature server sent"
	
	::=  {  statSIMEntry  67 }

statSIMSIPMsgSUBSCRIBERcv	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of SIP SUBSCRIBE messages the reporting call agent 
		or feature server received"
	
	::=  {  statSIMEntry  68 }

statSIMSIPMsgSUBSCRIBEXmit	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of SIP SUBSCRIBE messages the reporting call agent 
		or feature server sent"
	
	::=  {  statSIMEntry  69 }

statSIMSIPMsgREFERRcv	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of SIP REFER messages the reporting call agent 
		or feature server received"
	
	::=  {  statSIMEntry  70 }

statSIMSIPMsgREFERXmit	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of SIP REFER messages the reporting call agent 
		or feature server sent"
	
	::=  {  statSIMEntry  71 }

statSIMSIPMsgREFERREPLACESRcv	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of SIP REFER REPLACES messages the reporting 
		call agent or feature server received"
	
	::=  {  statSIMEntry  72 }

statSIMSIPMsgINVITEREPLACESXmit	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of SIP INVITE REPLACES messages the reporting 
		call agent or feature server sent"
	
	::=  {  statSIMEntry  73 }

statSIMSIPMsgINVITEREPLACESRcv	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of SIP INVITE REPLACES messages the reporting 
		call agent or feature server received"
	
	::=  {  statSIMEntry  74 }

statSIMSIPMsgREL100Rcv	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of REL100 class (TRYING) messages the reporting 
		call agent or feature server received"
	
	::=  {  statSIMEntry  75 }

statSIMSIPMsgREL100Xmit	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of REL100 class (TRYING) messages the reporting 
		call agent or feature server sent"
	
	::=  {  statSIMEntry  76 }

statSIMSIPMsgUNSUPPORTEDRcv	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of unsupported SIP messages the reporting 
		call agent or feature server received"
	
	::=  {  statSIMEntry  77 }

statSIMSIPMsgUPDATERcv	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of SIP UPDATE messages the reporting call agent 
		or feature server recieved"
	
	::=  {  statSIMEntry  78 }

statSIMSIPMsgUPDATEXmit	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of SIP UPDATE messages the reporting call agent 
		or feature server sent"
	
	::=  {  statSIMEntry  79 }

statSIMSIPMsgREFERWREPLACESRcv	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The number of SIP REFER with REPLACES messages the reporting call agent or feature server received"

	::=  {  statSIMEntry  80  }

statSIMSIPMsgMWINotifyXmit	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The number of SIP Notify MWIs sent to SIP phones by the reporting call agent"

	::=  {  statSIMEntry  81  }

statSIMSIPMsgMWINotifyXmitFail	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The number of SIP Notify MWIs failed to be sent to SIP phones by the reporting call agent"

	::=  {  statSIMEntry  82  }

statSIMSIPMsgMWINotifyRcv	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The number of SIP Notify MWIs received from SIP subscribers by the reporting call agent"

	::=  {  statSIMEntry  83  }

statAINFSTable	OBJECT-TYPE
	SYNTAX	SEQUENCE  OF  StatAINFSEntry
	MAX-ACCESS	not-accessible
	STATUS	obsolete
 	DESCRIPTION
		"AIN FS Statistics ."
	::=  { fsAinStatistics  1 }

statAINFSEntry	OBJECT-TYPE
	SYNTAX	StatAINFSEntry
	MAX-ACCESS	not-accessible
	STATUS	obsolete
 	DESCRIPTION
		"Row description for AIN FS Statistics Table."
	INDEX	{  statAINFSComponentID  }
	::=  { statAINFSTable 1 }

StatAINFSEntry  ::=  SEQUENCE {
	statAINFSComponentID  DisplayString,
	statAINFSDOW  DayOfWeek,
	statAINFSTOD  TimeOfDay,
	statAINFSSipRcvTot		Counter32,
	statAINFSSipSuccRcvTot		Counter32,
	statAINFSSipXmitTot		Counter32,
	statAINFSSipSuccXmitTot		Counter32,
	statAINFSSipREQRetranRcv	Counter32,
	statAINFSSipREQRetranXmit	Counter32,
	statAINFSSipRSPRetranRcv		Counter32,
	statAINFSSipRSPRetranXmit		Counter32,
	statAINFSSipT1TmrExpired		Counter32,
	statAINFSSipT2TmrReached		Counter32,
	statAINFSSipINVITERcv		Counter32,
	statAINFSSipINVITEXmit		Counter32,
	statAINFSSipCANCELRcv		Counter32,
	statAINFSSipCANCELXmit		Counter32,
	statAINFSSipBYERcv		Counter32,
	statAINFSSipBYEXmit		Counter32,
	statAINFSSipACKRcv		Counter32,
	statAINFSSipACKXmit		Counter32,
	statAINFSSipOPTIONSRcv		Counter32,
	statAINFSSipOPTIONSXmit		Counter32,
	statAINFSSipREGISTERRcv		Counter32,
	statAINFSSipREGISTERXmit		Counter32,
	statAINFSSipINFORcv		Counter32,
	statAINFSSipINFOXmit		Counter32,
	statAINFSSipNOTIFYRcv		Counter32,
	statAINFSSipNOTIFYXmit		Counter32,
	statAINFSSip100Rcv		Counter32,
	statAINFSSip100Xmit		Counter32,
	statAINFSSip18xRcv		Counter32,
	statAINFSSip18xXmit		Counter32,
	statAINFSSip200Rcv		Counter32,
	statAINFSSip200Xmit		Counter32,
	statAINFSSip3xxRcv		Counter32,
	statAINFSSip3xxXmit		Counter32,
	statAINFSSip4xxRcv		Counter32,
	statAINFSSip4xxXmit		Counter32,
	statAINFSSip5xxRcv		Counter32,
	statAINFSSip5xxXmit		Counter32,
	statAINFSSip6xxRcv		Counter32,
	statAINFSSip6xxXmit		Counter32,
	statAINFSSip7xxRcv		Counter32,
	statAINFSSip7xxXmit		Counter32,
	statAINFSNumAIN		Counter32,
	statAINFSNum8xx		Counter32,
	statAINFSNumExt8xx		Counter32,
	statAINFSNumExt8xxSucc		Counter32,
	statAINFSNumExt8xxFailAppl		Counter32,
	statAINFSNumExt8xxFailNet		Counter32,
	statAINFSNumLoc8xx		Counter32,
	statAINFSNumLoc8xxSucc		Counter32,
	statAINFSNumLoc8xxAniBlk		Counter32,
	statAINFSNumLoc8xxIIBlk		Counter32,
	statAINFSNumLoc8xxDnisSucc		Counter32,
	statAINFSNumLoc8xxRtngSucc		Counter32,
	statAINFSNumLoc8xxRerouted		Counter32,
	statAINFSNumLoc8xxFailAppl		Counter32,
	statAINFSNumLNP		Counter32,
	statAINFSNumExtLNP		Counter32,
	statAINFSNumExtLNPSucc		Counter32,
	statAINFSNumExtLNPFailAppl		Counter32,
	statAINFSNumExtLNPFailNet		Counter32,
	statAINFSNumCNAM		Counter32,
	statAINFSNumExtCNAM		Counter32,
	statAINFSNumExtCNAMSucc		Counter32,
	statAINFSNumExtCNAMFailAppl		Counter32,
	statAINFSNumExt8xxQueryFail		Counter32,
	statAINFSNumExtLNPQueryLRN		Counter32,
	statAINFSNumExtLNPQueryFail		Counter32,
	statAINFSSIPMsgProvRSPRETRANRcv	Counter32,
	statAINFSSIPMsgProvRSPRETRANXmit	Counter32,
	statAINFSSIPMsgPRACKRcv	Counter32,
	statAINFSSIPMsgPRACKXmit	Counter32,
	statAINFSSIPMsgSUBSCRIBERcv	Counter32,
	statAINFSSIPMsgSUBSCRIBEXmit	Counter32,
	statAINFSSIPMsgREFERRcv	Counter32,
	statAINFSSIPMsgREFERXmit	Counter32,
	statAINFSSIPMsgREFERREPLACESRcv	Counter32,
	statAINFSSIPMsgINVITEREPLACESXmit	Counter32,
	statAINFSSIPMsgINVITEREPLACESRcv	Counter32,
	statAINFSSIPMsgREL100Rcv	Counter32,
	statAINFSSIPMsgREL100Xmit	Counter32,
	statAINFSSIPMsgUNSUPPORTEDRcv	Counter32
	
	}
statAINFSComponentID	OBJECT-TYPE 
	SYNTAX	DisplayString 
	MAX-ACCESS	read-only 
	STATUS	obsolete
 
	
	DESCRIPTION
		"AIN Feature Server Identifier"
	
	::=  {  statAINFSEntry  1  }

statAINFSDOW	OBJECT-TYPE 
	SYNTAX	DayOfWeek 
	MAX-ACCESS	read-only 
	STATUS	obsolete
 
	
	DESCRIPTION
		"Day of week statistics was collected."
	
	::=  {  statAINFSEntry  2  }

statAINFSTOD	OBJECT-TYPE 
	SYNTAX	TimeOfDay 
	MAX-ACCESS	read-only 
	STATUS	obsolete
 
	
	DESCRIPTION
		"Time of day statistics was collected in XX minutes interval"
	
	::=  {  statAINFSEntry  3  }

statAINFSSipRcvTot	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	obsolete
 
	
	DESCRIPTION
		"The number of SIP messages the reporting call agent or 
		feature server attempted to receive"
	
	::=  {  statAINFSEntry  4  }

statAINFSSipSuccRcvTot	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	obsolete
 
	
	DESCRIPTION
		"The number of SIP messages the reporting call agent or 
		feature server successfully received"
	
	::=  {  statAINFSEntry  5  }

statAINFSSipXmitTot	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	obsolete
 
	
	DESCRIPTION
		"The number of SIP messages the reporting call agent or 
		feature server attempted to send"
	
	::=  {  statAINFSEntry  6  }

statAINFSSipSuccXmitTot	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	obsolete
 
	
	DESCRIPTION
		"The number of SIP messages the reporting call agent or 
		feature server successfully sent"
	
	::=  {  statAINFSEntry  7  }

statAINFSSipREQRetranRcv	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	obsolete
 
	
	DESCRIPTION
		"The number of SIP request retransmission messages the 
		reporting call agent or feature server received"
	
	::=  {  statAINFSEntry  8  }

statAINFSSipREQRetranXmit	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	obsolete
 
	
	DESCRIPTION
		"The number of SIP request retransmission messages the 
		reporting call agent or feature server sent"
	
	::=  {  statAINFSEntry  9  }

statAINFSSipRSPRetranRcv	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	obsolete
 
	
	DESCRIPTION
		"The number of SIP response retransmission messages the 
		reporting call agent or feature server received"
	
	::=  {  statAINFSEntry  10  }

statAINFSSipRSPRetranXmit	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	obsolete
 
	
	DESCRIPTION
		"The number of SIP response retransmission messages the 
		reporting call agent or feature server sent"
	
	::=  {  statAINFSEntry  11  }

statAINFSSipT1TmrExpired	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	obsolete
 
	
	DESCRIPTION
		"The number of SIP T1 Timer expirations that occurred on the 
		reporting call agent or feature server received over the 
		collection interval"
	
	::=  {  statAINFSEntry  12  }

statAINFSSipT2TmrReached	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	obsolete
 
	
	DESCRIPTION
		"The number of SIP T2 Timer expirations that occurred on the 
		reporting call agent or feature server received over the 
		collection interval"
	
	::=  {  statAINFSEntry  13  }

statAINFSSipINVITERcv	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	obsolete
 
	
	DESCRIPTION
		"The number of SIP INVITE messages the reporting call agent 
		or feature server received"
	
	::=  {  statAINFSEntry  14  }

statAINFSSipINVITEXmit	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	obsolete
 
	
	DESCRIPTION
		"The number of SIP INVITE messages the reporting call agent 
		or feature server sent"
	
	::=  {  statAINFSEntry  15  }

statAINFSSipCANCELRcv	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	obsolete
 
	
	DESCRIPTION
		"The number of SIP CANCEL messages the reporting call agent 
		or feature server received"
	
	::=  {  statAINFSEntry  16  }

statAINFSSipCANCELXmit	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	obsolete
 
	
	DESCRIPTION
		"The number of SIP CANCEL messages the reporting call agent 
		or feature server sent"
	
	::=  {  statAINFSEntry  17  }

statAINFSSipBYERcv	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	obsolete
 
	
	DESCRIPTION
		"The number of SIP BYE messages the reporting call agent 
		or feature server received"
	
	::=  {  statAINFSEntry  18  }

statAINFSSipBYEXmit	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	obsolete
 
	
	DESCRIPTION
		"The number of SIP BYE messages the reporting call agent 
		or feature server sent"
	
	::=  {  statAINFSEntry  19  }

statAINFSSipACKRcv	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	obsolete
 
	
	DESCRIPTION
		"The number of SIP ACK messages the reporting call agent 
		or feature server received"
	
	::=  {  statAINFSEntry  20  }

statAINFSSipACKXmit	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	obsolete
 
	
	DESCRIPTION
		"The number of SIP ACK messages the reporting call agent 
		or feature server sent"
	
	::=  {  statAINFSEntry  21  }

statAINFSSipOPTIONSRcv	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	obsolete
 
	
	DESCRIPTION
		"The number of SIP OPTIONS messages the reporting call agent 
		or feature server received"
	
	::=  {  statAINFSEntry  22  }

statAINFSSipOPTIONSXmit	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	obsolete
 
	
	DESCRIPTION
		"The number of SIP OPTIONS messages the reporting call agent 
		or feature server sent"
	
	::=  {  statAINFSEntry  23  }

statAINFSSipREGISTERRcv	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	obsolete
 
	
	DESCRIPTION
		"The number of SIP REGISTER messages the reporting call agent 
		or feature server received"
	
	::=  {  statAINFSEntry  24  }

statAINFSSipREGISTERXmit	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	obsolete
 
	
	DESCRIPTION
		"The number of SIP REGISTER messages the reporting call agent 
		or feature server sent"
	
	::=  {  statAINFSEntry  25  }

statAINFSSipINFORcv	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	obsolete
 
	
	DESCRIPTION
		"The number of SIP INFO messages the reporting call agent 
		or feature server received"
	
	::=  {  statAINFSEntry  26  }

statAINFSSipINFOXmit	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	obsolete
 
	
	DESCRIPTION
		"The number of SIP INFO messages the reporting call agent 
		or feature server sent"
	
	::=  {  statAINFSEntry  27  }

statAINFSSipNOTIFYRcv	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	obsolete
 
	
	DESCRIPTION
		"The number of SIP NOTIFY messages the reporting call agent 
		or feature server received"
	
	::=  {  statAINFSEntry  28  }

statAINFSSipNOTIFYXmit	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	obsolete
 
	
	DESCRIPTION
		"The number of SIP NOTIFY messages the reporting call agent 
		or feature server sent"
	
	::=  {  statAINFSEntry  29  }

statAINFSSip100Rcv	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	obsolete
 
	
	DESCRIPTION
		"The number of 100 class (TRYING) messages the reporting 
		call agent or feature server received"
	
	::=  {  statAINFSEntry  30  }

statAINFSSip100Xmit	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	obsolete
 
	
	DESCRIPTION
		"The number of 100 class (TRYING) messages the reporting 
		call agent or feature server sent"
	
	::=  {  statAINFSEntry  31  }

statAINFSSip18xRcv	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	obsolete
 
	
	DESCRIPTION
		"The number of 18x class (INFORMATIONAL) messages the reporting 
		call agent or feature server received"
	
	::=  {  statAINFSEntry  32  }

statAINFSSip18xXmit	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	obsolete
 
	
	DESCRIPTION
		"The number of 18x class (INFORMATIONAL) messages the reporting 
		call agent or feature server sent"
	
	::=  {  statAINFSEntry  33  }

statAINFSSip200Rcv	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	obsolete
 
	
	DESCRIPTION
		"The number of 200 class (SUCCESS) messages the reporting 
		call agent or feature server received"
	
	::=  {  statAINFSEntry  34  }

statAINFSSip200Xmit	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	obsolete
 
	
	DESCRIPTION
		"The number of 200 class (SUCCESS) messages the reporting 
		call agent or feature server sent"
	
	::=  {  statAINFSEntry  35  }

statAINFSSip3xxRcv	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	obsolete
 
	
	DESCRIPTION
		"The number of 3xx class (REDIRECTION) messages the reporting 
		call agent or feature server received"
	
	::=  {  statAINFSEntry  36  }

statAINFSSip3xxXmit	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	obsolete
 
	
	DESCRIPTION
		"The number of 3xx class (REDIRECTION) messages the reporting 
		call agent or feature server sent"
	
	::=  {  statAINFSEntry  37  }

statAINFSSip4xxRcv	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	obsolete
 
	
	DESCRIPTION
		"The number of 4xx class (REQUEST FAILURES) messages the 
		reporting call agent or feature server received"
	
	::=  {  statAINFSEntry  38  }

statAINFSSip4xxXmit	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	obsolete
 
	
	DESCRIPTION
		"The number of 4xx class (REQUEST FAILURES) messages the 
		reporting call agent or feature server sent"
	
	::=  {  statAINFSEntry  39  }

statAINFSSip5xxRcv	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	obsolete
 
	
	DESCRIPTION
		"The number of 5xx class (SERVER FAILURES) messages the 
		reporting call agent or feature server received"
	
	::=  {  statAINFSEntry  40  }

statAINFSSip5xxXmit	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	obsolete
 
	
	DESCRIPTION
		"The number of 5xx class (SERVER FAILURES) messages the 
		reporting call agent or feature server sent"
	
	::=  {  statAINFSEntry  41  }

statAINFSSip6xxRcv	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	obsolete
 
	
	DESCRIPTION
		"The number of 6xx class (GLOBAL FAILURES) messages the 
		reporting call agent or feature server received"
	
	::=  {  statAINFSEntry  42  }

statAINFSSip6xxXmit	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	obsolete
 
	
	DESCRIPTION
		"The number of 6xx class (GLOBAL FAILURES) messages the 
		reporting call agent or feature server sent"
	
	::=  {  statAINFSEntry  43  }

statAINFSSip7xxRcv	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	obsolete
 
	
	DESCRIPTION
		"The number of 7xx class (RESERVED) messages the reporting 
		call agent or feature server received"
	
	::=  {  statAINFSEntry  44  }

statAINFSSip7xxXmit	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	obsolete
 
	
	DESCRIPTION
		"The number of 7xx class (RESERVED) messages the reporting 
		call agent or feature server sent"
	
	::=  {  statAINFSEntry  45  }

statAINFSNumAIN	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	obsolete
 
	
	DESCRIPTION
		"The total number of queries attempted on the reporting 
		feature server"
	
	::=  {  statAINFSEntry  46  }

statAINFSNum8xx	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	obsolete
 
	
	DESCRIPTION
		"The number of 8XX translation queries attempted on the 
		reporting feature server"
	
	::=  {  statAINFSEntry  47  }

statAINFSNumExt8xx	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	obsolete
 
	
	DESCRIPTION
		"The number of 8XX translation queries that resulted in an 
		external query to a network database attempted on the 
		reporting feature server"
	
	::=  {  statAINFSEntry  48  }

statAINFSNumExt8xxSucc	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	obsolete
 
	
	DESCRIPTION
		"The number of 8XX translation queries that resulted in a 
		successful external query to a network database attempted on 
		the reporting feature server"
	
	::=  {  statAINFSEntry  49  }

statAINFSNumExt8xxFailAppl	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	obsolete
 
	
	DESCRIPTION
		"The number of 8XX translation queries that resulted in a 
		failed external query to a network database due to an 
		application failure from the reporting feature server"
	
	::=  {  statAINFSEntry  50  }

statAINFSNumExt8xxFailNet	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	obsolete
 
	
	DESCRIPTION
		"The number of 8XX translation queries that resulted in a 
		failed external query to a network database due to a network 
		communication failure from the reporting feature server"
	
	::=  {  statAINFSEntry  51  }

statAINFSNumLoc8xx	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	obsolete
 
	
	DESCRIPTION
		"The number of 8XX translation queries attempted to be 
		processed locally on the reporting feature server"
	
	::=  {  statAINFSEntry  52  }

statAINFSNumLoc8xxSucc	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	obsolete
 
	
	DESCRIPTION
		"The number of 8XX translation queries successfully processed 
		locally on the reporting feature server"
	
	::=  {  statAINFSEntry  53  }

statAINFSNumLoc8xxAniBlk	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	obsolete
 
	
	DESCRIPTION
		"The number of 8XX translation queries that were blocked due 
		to ANI screening processed locally on the reporting feature 
		server"
	
	::=  {  statAINFSEntry  54  }

statAINFSNumLoc8xxIIBlk	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	obsolete
 
	
	DESCRIPTION
		"The number of 8XX translation queries that were blocked due 
		to II screening processed locally on the reporting 
		feature server"
	
	::=  {  statAINFSEntry  55  }

statAINFSNumLoc8xxDnisSucc	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	obsolete
 
	
	DESCRIPTION
		"The number of 8XX DNIS translation queries successfully 
		processed locally on the reporting feature server"
	
	::=  {  statAINFSEntry  56  }

statAINFSNumLoc8xxRtngSucc	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	obsolete
 
	
	DESCRIPTION
		"The number of 8XX routing translation queries successfully 
		processed locally on the reporting feature server"
	
	::=  {  statAINFSEntry  57  }

statAINFSNumLoc8xxRerouted	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	obsolete
 
	
	DESCRIPTION
		"The number of 8XX translation queries successfully processed 
		locally on the reporting feature server that resulted 
		in re-routing"
	
	::=  {  statAINFSEntry  58  }

statAINFSNumLoc8xxFailAppl	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	obsolete
 
	
	DESCRIPTION
		"The number of 8XX translation queries that resulted in 
		a failure due to an application error on the reporting 
		feature server"
	
	::=  {  statAINFSEntry  59  }

statAINFSNumLNP	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	obsolete
 
	
	DESCRIPTION
		"The number of LNP translation queries attempted on the 
		reporting feature server"
	
	::=  {  statAINFSEntry  60  }

statAINFSNumExtLNP	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	obsolete
 
	
	DESCRIPTION
		"The number of LNP translation queries that resulted in an 
		external query to a network database attempted on the 
		reporting feature server"
	
	::=  {  statAINFSEntry  61  }

statAINFSNumExtLNPSucc	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	obsolete
 
	
	DESCRIPTION
		"The number of LNP translation queries that resulted in a 
		successful external query to a network database attempted on 
		the reporting feature server"
	
	::=  {  statAINFSEntry  62  }

statAINFSNumExtLNPFailAppl	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	obsolete
 
	
	DESCRIPTION
		"The number of LNP translation queries that resulted in a 
		failed external query to a network database due to an 
		application failure from the reporting feature server"
	
	::=  {  statAINFSEntry  63  }

statAINFSNumExtLNPFailNet	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	obsolete
 
	
	DESCRIPTION
		"The number of LNP translation queries that resulted in a 
		failed external query to a network database due to a network 
		communication failure from the reporting feature server"
	
	::=  {  statAINFSEntry  64  }

statAINFSNumCNAM	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	obsolete
 
	
	DESCRIPTION
		"The number of CNAM translation queries attempted on the 
		reporting feature server"
	
	::=  {  statAINFSEntry  65  }

statAINFSNumExtCNAM	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	obsolete
 
	
	DESCRIPTION
		"The number of CNAM translation queries that resulted in an 
		external query to a network database attempted on the 
		reporting feature server"
	
	::=  {  statAINFSEntry  66  }

statAINFSNumExtCNAMSucc	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	obsolete
 
	
	DESCRIPTION
		"The number of CNAM translation queries that resulted in a 
		successful external query to a network database attempted on 
		the reporting feature server"
	
	::=  {  statAINFSEntry  67  }

statAINFSNumExtCNAMFailAppl	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	obsolete
 
	
	DESCRIPTION
		"The number of CNAM translation queries that resulted in a 
		failed external query to a network database due to an 
		application failure from the reporting feature server"
	
	::=  {  statAINFSEntry  68  }

statAINFSNumExt8xxQueryFail	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	obsolete
 
	
	DESCRIPTION
		"The number of 8XX queries that failed due to an SCP timeout 
		when attempted by the reporting feature server"
	
	::=  {  statAINFSEntry  69  }

statAINFSNumExtLNPQueryLRN	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	obsolete
 
	
	DESCRIPTION
		"The number of LNP queries that resulted in a successful 
		response from the SCP with an LRN when attempted by the 
		reporting feature server"
	
	::=  {  statAINFSEntry  70  }

statAINFSNumExtLNPQueryFail	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	obsolete
 
	
	DESCRIPTION
		"The number of LNP queries that failed due to an SCP timeout 
		when attempted by the reporting feature server"
	
	::=  {  statAINFSEntry  71  }

statAINFSSIPMsgProvRSPRETRANRcv	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	obsolete
 
	
	DESCRIPTION
		"The number of SIP provisioning response retransmission 
		messages the reporting call agent or feature server received"
	
	::=  {  statAINFSEntry  72 }

statAINFSSIPMsgProvRSPRETRANXmit	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	obsolete
 
	
	DESCRIPTION
		"The number of SIP provisioning response retransmission 
		messages the reporting call agent or feature server sent"
	
	::=  {  statAINFSEntry  73 }

statAINFSSIPMsgPRACKRcv	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	obsolete
 
	
	DESCRIPTION
		"The number of SIP PRACK messages the reporting call agent or 
		feature server received"
	
	::=  {  statAINFSEntry  74 }

statAINFSSIPMsgPRACKXmit	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	obsolete
 
	
	DESCRIPTION
		"The number of SIP PRACK messages the reporting call agent 
		or feature server sent"
	
	::=  {  statAINFSEntry  75 }

statAINFSSIPMsgSUBSCRIBERcv	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	obsolete
 
	
	DESCRIPTION
		"The number of SIP SUBSCRIBE messages the reporting call agent 
		or feature server received"
	
	::=  {  statAINFSEntry  76 }

statAINFSSIPMsgSUBSCRIBEXmit	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	obsolete
 
	
	DESCRIPTION
		"The number of SIP SUBSCRIBE messages the reporting call agent 
		or feature server sent"
	
	::=  {  statAINFSEntry  77 }

statAINFSSIPMsgREFERRcv	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	obsolete
 
	
	DESCRIPTION
		"The number of SIP REFER messages the reporting call agent 
		or feature server received"
	
	::=  {  statAINFSEntry  78 }

statAINFSSIPMsgREFERXmit	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	obsolete
 
	
	DESCRIPTION
		"The number of SIP REFER messages the reporting call agent 
		or feature server sent"
	
	::=  {  statAINFSEntry  79 }

statAINFSSIPMsgREFERREPLACESRcv	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	obsolete
 
	
	DESCRIPTION
		"The number of SIP REFER REPLACES messages the reporting 
		call agent or feature server received"
	
	::=  {  statAINFSEntry  80 }

statAINFSSIPMsgINVITEREPLACESXmit	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	obsolete
 
	
	DESCRIPTION
		"The number of SIP INVITE REPLACES messages the reporting 
		call agent or feature server sent"
	
	::=  {  statAINFSEntry  81 }

statAINFSSIPMsgINVITEREPLACESRcv	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	obsolete
 
	
	DESCRIPTION
		"The number of SIP INVITE REPLACES messages the reporting 
		call agent or feature server received"
	
	::=  {  statAINFSEntry  82 }

statAINFSSIPMsgREL100Rcv	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	obsolete
 
	
	DESCRIPTION
		"The number of REL100 class (TRYING) messages the reporting 
		call agent or feature server received"
	
	::=  {  statAINFSEntry  83 }

statAINFSSIPMsgREL100Xmit	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	obsolete
 
	
	DESCRIPTION
		"The number of REL100 class (TRYING) messages the reporting 
		call agent or feature server sent"
	
	::=  {  statAINFSEntry  84 }

statAINFSSIPMsgUNSUPPORTEDRcv	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	obsolete
 
	
	DESCRIPTION
		"The number of unsupported SIP messages the reporting 
		call agent or feature server received"
	
	::=  {  statAINFSEntry  85 }

statAINSVCTable	OBJECT-TYPE
	SYNTAX	SEQUENCE  OF  StatAINSVCEntry
	MAX-ACCESS	not-accessible
	STATUS	current
 	DESCRIPTION
		"AIN Feature Service related statistics."
	::=  { fsAinStatistics  2 }

statAINSVCEntry	OBJECT-TYPE
	SYNTAX	StatAINSVCEntry
	MAX-ACCESS	not-accessible
	STATUS	current
 	DESCRIPTION
		"Row description for AIN Feature Service related Statistics 
		Table."
	INDEX	{  statAINSVCComponentID  }
	::=  { statAINSVCTable 1 }

StatAINSVCEntry  ::=  SEQUENCE {
	statAINSVCComponentID  DisplayString,
	statAINSVCDOW  DayOfWeek,
	statAINSVCTOD  TimeOfDay,
	statAINSVCSipTotalIncomMsg		Counter32,
	statAINSVCSipTotalSuccIncomMsg		Counter32,
	statAINSVCSipTotalOutgMsgAttmp		Counter32,
	statAINSVCSipTotalSuccoutgMsg		Counter32,
	statAINSVCSipReqRetranRx		Counter32,
	statAINSVCSipReqRetranTx		Counter32,
	statAINSVCSipRspRetranRx		Counter32,
	statAINSVCSipRspRetranTx		Counter32,
	statAINSVCSipT1TimerExpired		Counter32,
	statAINSVCSipT2TimerReached		Counter32,
	statAINSVCSipInviteRx		Counter32,
	statAINSVCSipInviteTx		Counter32,
	statAINSVCSipCancelRx		Counter32,
	statAINSVCSipCancelTx		Counter32,
	statAINSVCSipByeRx		Counter32,
	statAINSVCSipByeTx		Counter32,
	statAINSVCSipAckRx		Counter32,
	statAINSVCSipAckTx		Counter32,
	statAINSVCSipOptionsRx		Counter32,
	statAINSVCSipOptionsTx		Counter32,
	statAINSVCSipRegisterRx		Counter32,
	statAINSVCSipRegisterTx		Counter32,
	statAINSVCSipInfoRx		Counter32,
	statAINSVCSipInfoTx		Counter32,
	statAINSVCSipNotifyRx		Counter32,
	statAINSVCSipNotifyTx		Counter32,
	statAINSVCSip100Rx		Counter32,
	statAINSVCSip100Tx		Counter32,
	statAINSVCSip18xRx		Counter32,
	statAINSVCSip18xTx		Counter32,
	statAINSVCSip200Rx		Counter32,
	statAINSVCSip200Tx		Counter32,
	statAINSVCSip3xxRx		Counter32,
	statAINSVCSip3xxTx		Counter32,
	statAINSVCSip4xxRx		Counter32,
	statAINSVCSip4xxTx		Counter32,
	statAINSVCSip5xxRx		Counter32,
	statAINSVCSip5xxTx		Counter32,
	statAINSVCSip6xxRx		Counter32,
	statAINSVCSip6xxTx		Counter32,
	statAINSVCSip7xxRx		Counter32,
	statAINSVCSip7xxTx		Counter32,
	statAINSVCSipProvRspRetranRx		Counter32,
	statAINSVCSipProvRspRetranTx		Counter32,
	statAINSVCSipPrackRx		Counter32,
	statAINSVCSipPrackTx		Counter32,
	statAINSVCSipSubscribeRx		Counter32,
	statAINSVCSipSubscribeTx		Counter32,
	statAINSVCSipReferRx		Counter32,
	statAINSVCSipReferTx		Counter32,
	statAINSVCSipReferReplacesRx		Counter32,
	statAINSVCSipInviteReplacesTx		Counter32,
	statAINSVCSipInviteReplacesRx		Counter32,
	statAINSVCSipRel100Rx		Counter32,
	statAINSVCSipRel100Tx		Counter32,
	statAINSVCSipUnsupportedRx		Counter32,
	statAINSVCSipUpdateRx		Counter32,
	statAINSVCSipUpdateTx		Counter32,
	statAINSVCAinsvcTotalQuery		Counter32,
	statAINSVCAinsvc8xxQuery		Counter32,
	statAINSVCAinsvcExt8xxQuery		Counter32,
	statAINSVCAinsvcExt8xxQuerySucc		Counter32,
	statAINSVCAinsvcExt8xxFailApp		Counter32,
	statAINSVCAinsvcExt8xxFailNetw		Counter32,
	statAINSVCAinsvcLoc8xxQuery		Counter32,
	statAINSVCAinsvcLoc8xxQuerySucc		Counter32,
	statAINSVCAinsvcLoc8xxAniBlock		Counter32,
	statAINSVCAinsvcLoc8xxIiBlock		Counter32,
	statAINSVCAinsvcLoc8xxDnisSucc		Counter32,
	statAINSVCAinsvcLoc8xxRoutingSucc		Counter32,
	statAINSVCAinsvcLoc8xxReroute		Counter32,
	statAINSVCAinsvcLoc8xxFailApp		Counter32,
	statAINSVCAinsvcTotalLnpQuery		Counter32,
	statAINSVCAinsvcExtLnpQuery		Counter32,
	statAINSVCAinsvcExtLnpQuerySucc		Counter32,
	statAINSVCAinsvcExtLnpFailApp		Counter32,
	statAINSVCAinsvcExtLnpFailNetw		Counter32,
	statAINSVCAinsvcSipReferWReplacesRx		Counter32,
	statAINSVCAinsvcSipMWINotifyTx		Counter32,
	statAINSVCAinsvcSipMWINotifyTxFail		Counter32,
	statAINSVCAinsvcSipMWINofifyRx		Counter32,
	statAINSVCAinsvcExt8xxQueryFail		Counter32,
	statAINSVCAinsvcExtLnpQueryLrn		Counter32,
	statAINSVCAinsvcExtLnpQueryFail		Counter32
	}
statAINSVCComponentID	OBJECT-TYPE 
	SYNTAX	DisplayString 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"AIN SVC Component Identifier"
	
	::=  {  statAINSVCEntry  1  }

statAINSVCDOW	OBJECT-TYPE 
	SYNTAX	DayOfWeek 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"Day of week statistics was collected."
	
	::=  {  statAINSVCEntry  2  }

statAINSVCTOD	OBJECT-TYPE 
	SYNTAX	TimeOfDay 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"Time of day statistics was collected in XX minutes interval"
	
	::=  {  statAINSVCEntry  3  }

statAINSVCSipTotalIncomMsg	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The number of SIP messages the reporting call agent or feature server attempted to receive"

	::=  {  statAINSVCEntry  4  }

statAINSVCSipTotalSuccIncomMsg	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The number of SIP messages the reporting call agent or feature server successfully received"

	::=  {  statAINSVCEntry  5  }

statAINSVCSipTotalOutgMsgAttmp	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The number of SIP messages the reporting call agent or feature server attempted to send"

	::=  {  statAINSVCEntry  6  }

statAINSVCSipTotalSuccoutgMsg	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The number of SIP messages the reporting call agent or feature server successfully sent"

	::=  {  statAINSVCEntry  7  }

statAINSVCSipReqRetranRx	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The number of SIP request retransmission messages the reporting call agent or feature server received"

	::=  {  statAINSVCEntry  8  }

statAINSVCSipReqRetranTx	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The number of SIP request retransmission messages the reporting call agent or feature server sent"

	::=  {  statAINSVCEntry  9  }

statAINSVCSipRspRetranRx	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The number of SIP response retransmission messages the reporting call agent or feature server received"

	::=  {  statAINSVCEntry  10  }

statAINSVCSipRspRetranTx	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The number of SIP response retransmission messages the reporting call agent or feature server sent"

	::=  {  statAINSVCEntry  11  }

statAINSVCSipT1TimerExpired	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The number of SIP T1 Timer expirations that occurred on the reporting call agent or feature server received over the collection interval"

	::=  {  statAINSVCEntry  12  }

statAINSVCSipT2TimerReached	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The number of SIP T2 Timer expirations that occurred on the reporting call agent or feature server received over the collection interval"

	::=  {  statAINSVCEntry  13  }

statAINSVCSipInviteRx	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The number of SIP INVITE messages the reporting call agent or feature server received"

	::=  {  statAINSVCEntry  14  }

statAINSVCSipInviteTx	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The number of SIP INVITE messages the reporting call agent or feature server sent"

	::=  {  statAINSVCEntry  15  }

statAINSVCSipCancelRx	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The number of SIP CANCEL messages the reporting call agent or feature server received"

	::=  {  statAINSVCEntry  16  }

statAINSVCSipCancelTx	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The number of SIP CANCEL messages the reporting call agent or feature server sent"

	::=  {  statAINSVCEntry  17  }

statAINSVCSipByeRx	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The number of SIP BYE messages the reporting call agent or feature server received"

	::=  {  statAINSVCEntry  18  }

statAINSVCSipByeTx	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The number of SIP BYE messages the reporting call agent or feature server sent"

	::=  {  statAINSVCEntry  19  }

statAINSVCSipAckRx	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The number of SIP ACK messages the reporting call agent or feature server received"

	::=  {  statAINSVCEntry  20  }

statAINSVCSipAckTx	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The number of SIP ACK messages the reporting call agent or feature server sent"

	::=  {  statAINSVCEntry  21  }

statAINSVCSipOptionsRx	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The number of SIP OPTIONS messages the reporting call agent or feature server received"

	::=  {  statAINSVCEntry  22  }

statAINSVCSipOptionsTx	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The number of SIP OPTIONS messages the reporting call agent or feature server sent"

	::=  {  statAINSVCEntry  23  }

statAINSVCSipRegisterRx	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The number of SIP REGISTER messages the reporting call agent or feature server received"

	::=  {  statAINSVCEntry  24  }

statAINSVCSipRegisterTx	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The number of SIP REGISTER messages the reporting call agent or feature server sent"

	::=  {  statAINSVCEntry  25  }

statAINSVCSipInfoRx	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The number of SIP INFO messages the reporting call agent or feature server received"

	::=  {  statAINSVCEntry  26  }

statAINSVCSipInfoTx	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The number of SIP INFO messages the reporting call agent or feature server sent"

	::=  {  statAINSVCEntry  27  }

statAINSVCSipNotifyRx	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The number of SIP NOTIFY messages the reporting call agent or feature server received"

	::=  {  statAINSVCEntry  28  }

statAINSVCSipNotifyTx	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The number of SIP NOTIFY messages the reporting call agent or feature server sent"

	::=  {  statAINSVCEntry  29  }

statAINSVCSip100Rx	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The number of 100 class (TRYING) messages the reporting call agent or feature server received"

	::=  {  statAINSVCEntry  30  }

statAINSVCSip100Tx	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The number of 100 class (TRYING) messages the reporting call agent or feature server sent"

	::=  {  statAINSVCEntry  31  }

statAINSVCSip18xRx	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The number of 18x class (INFORMATIONAL) messages the reporting call agent or feature server received"

	::=  {  statAINSVCEntry  32  }

statAINSVCSip18xTx	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The number of 18x class (INFORMATIONAL) messages the reporting call agent or feature server sent"

	::=  {  statAINSVCEntry  33  }

statAINSVCSip200Rx	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The number of 200 class (SUCCESS) messages the reporting call agent or feature server received"

	::=  {  statAINSVCEntry  34  }

statAINSVCSip200Tx	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The number of 200 class (SUCCESS) messages the reporting call agent or feature server sent"

	::=  {  statAINSVCEntry  35  }

statAINSVCSip3xxRx	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The number of 3xx class (REDIRECTION) messages the reporting call agent or feature server received"

	::=  {  statAINSVCEntry  36  }

statAINSVCSip3xxTx	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The number of 3xx class (REDIRECTION) messages the reporting call agent or feature server sent"

	::=  {  statAINSVCEntry  37  }

statAINSVCSip4xxRx	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The number of 4xx class (REQUEST FAILURES) messages the reporting call agent or feature server received"

	::=  {  statAINSVCEntry  38  }

statAINSVCSip4xxTx	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The number of 4xx class (REQUEST FAILURES) messages the reporting call agent or feature server sent"

	::=  {  statAINSVCEntry  39  }

statAINSVCSip5xxRx	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The number of 5xx class (SERVER FAILURES) messages the reporting call agent or feature server received"

	::=  {  statAINSVCEntry  40  }

statAINSVCSip5xxTx	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The number of 5xx class (SERVER FAILURES) messages the reporting call agent or feature server sent"

	::=  {  statAINSVCEntry  41  }

statAINSVCSip6xxRx	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The number of 6xx class (GLOBAL FAILURES) messages the reporting call agent or feature server received"

	::=  {  statAINSVCEntry  42  }

statAINSVCSip6xxTx	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The number of 6xx class (GLOBAL FAILURES) messages the reporting call agent or feature server sent"

	::=  {  statAINSVCEntry  43  }

statAINSVCSip7xxRx	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The number of 7xx class (RESERVED) messages the reporting call agent or feature server received"

	::=  {  statAINSVCEntry  44  }

statAINSVCSip7xxTx	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The number of 7xx class (RESERVED) messages the reporting call agent or feature server sent"

	::=  {  statAINSVCEntry  45  }

statAINSVCSipProvRspRetranRx	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The number of SIP provisioning response retransmission messages the reporting call agent or feature server received"

	::=  {  statAINSVCEntry  46  }

statAINSVCSipProvRspRetranTx	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The number of SIP provisioning response retransmission messages the reporting call agent or feature server sent"

	::=  {  statAINSVCEntry  47  }

statAINSVCSipPrackRx	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The number of SIP PRACK messages the reporting call agent or feature server received"

	::=  {  statAINSVCEntry  48  }

statAINSVCSipPrackTx	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The number of SIP PRACK messages the reporting call agent or feature server sent"

	::=  {  statAINSVCEntry  49  }

statAINSVCSipSubscribeRx	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The number of SIP SUBSCRIBE messages the reporting call agent or feature server received"

	::=  {  statAINSVCEntry  50  }

statAINSVCSipSubscribeTx	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The number of SIP SUBSCRIBE messages the reporting call agent or feature server sent"

	::=  {  statAINSVCEntry  51  }

statAINSVCSipReferRx	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The number of SIP REFER messages the reporting call agent or feature server received"

	::=  {  statAINSVCEntry  52  }

statAINSVCSipReferTx	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The number of SIP REFER messages the reporting call agent or feature server sent"

	::=  {  statAINSVCEntry  53  }

statAINSVCSipReferReplacesRx	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The number of SIP REFER REPLACES messages the reporting call agent or feature server received"

	::=  {  statAINSVCEntry  54  }

statAINSVCSipInviteReplacesTx	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The number of SIP INVITE REPLACES messages the reporting call agent or feature server sent"

	::=  {  statAINSVCEntry  55  }

statAINSVCSipInviteReplacesRx	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The number of SIP INVITE REPLACES messages the reporting call agent or feature server received"

	::=  {  statAINSVCEntry  56  }

statAINSVCSipRel100Rx	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The number of REL100 class (TRYING) messages the reporting call agent or feature server received"

	::=  {  statAINSVCEntry  57  }

statAINSVCSipRel100Tx	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The number of REL100 class (TRYING) messages the reporting call agent or feature server sent"

	::=  {  statAINSVCEntry  58  }

statAINSVCSipUnsupportedRx	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The number of unsupported SIP messages the reporting call agent or feature server received"

	::=  {  statAINSVCEntry  59  }

statAINSVCSipUpdateRx	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The number of SIP UPDATE messages the reporting call agent or feature server received"

	::=  {  statAINSVCEntry  60  }

statAINSVCSipUpdateTx	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The number of SIP UPDATE messages the reporting call agent or feature server sent"

	::=  {  statAINSVCEntry  61  }

statAINSVCAinsvcTotalQuery	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of queries attempted on the reporting feature server"

	::=  {  statAINSVCEntry  62  }

statAINSVCAinsvc8xxQuery	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The number of 8XX translation queries attempted on the reporting feature server"

	::=  {  statAINSVCEntry  63  }

statAINSVCAinsvcExt8xxQuery	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The number of 8XX translation queries that resulted in an external query to a network database attempted on the reporting feature server"

	::=  {  statAINSVCEntry  64  }

statAINSVCAinsvcExt8xxQuerySucc	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The number of 8XX translation queries that resulted in a successful external query to a network database attempted on the reporting feature server"

	::=  {  statAINSVCEntry  65  }

statAINSVCAinsvcExt8xxFailApp	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The number of 8XX translation queries that resulted in a failed external query to a network database due to an application failure from the reporting feature server"

	::=  {  statAINSVCEntry  66  }

statAINSVCAinsvcExt8xxFailNetw	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The number of 8XX translation queries that resulted in a failed external query to a network database due to a network communication failure from the reporting feature server"

	::=  {  statAINSVCEntry  67  }

statAINSVCAinsvcLoc8xxQuery	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The number of 8XX translation queries attempted to be processed locally on the reporting feature server"

	::=  {  statAINSVCEntry  68  }

statAINSVCAinsvcLoc8xxQuerySucc	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The number of 8XX translation queries successfully processed locally on the reporting feature server"

	::=  {  statAINSVCEntry  69  }

statAINSVCAinsvcLoc8xxAniBlock	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The number of 8XX translation queries that were blocked due to ANI screening processed locally on the reporting feature server"

	::=  {  statAINSVCEntry  70  }

statAINSVCAinsvcLoc8xxIiBlock	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The number of 8XX translation queries that were blocked due to II screening processed locally on the reporting feature server"

	::=  {  statAINSVCEntry  71  }

statAINSVCAinsvcLoc8xxDnisSucc	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The number of 8XX DNIS translation queries successfully processed locally on the reporting feature server"

	::=  {  statAINSVCEntry  72  }

statAINSVCAinsvcLoc8xxRoutingSucc	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The number of 8XX routing translation queries successfully processed locally on the reporting feature server"

	::=  {  statAINSVCEntry  73  }

statAINSVCAinsvcLoc8xxReroute	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The number of 8XX translation queries successfully processed locally on the reporting feature server that resulted in re-routing"

	::=  {  statAINSVCEntry  74  }

statAINSVCAinsvcLoc8xxFailApp	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The number of 8XX translation queries that resulted in a failure due to an application error on the reporting feature server"

	::=  {  statAINSVCEntry  75  }

statAINSVCAinsvcTotalLnpQuery	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The number of LNP translation queries attempted on the reporting feature server"

	::=  {  statAINSVCEntry  76  }

statAINSVCAinsvcExtLnpQuery	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The number of LNP translation queries that resulted in an external query to a network database attempted on the reporting feature server"

	::=  {  statAINSVCEntry  77  }

statAINSVCAinsvcExtLnpQuerySucc	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The number of LNP translation queries that resulted in a successful external query to a network database attempted on the reporting feature server"

	::=  {  statAINSVCEntry  78  }

statAINSVCAinsvcExtLnpFailApp	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The number of LNP translation queries that resulted in a failed external query to a network database due to an application failure from the reporting feature server"

	::=  {  statAINSVCEntry  79  }

statAINSVCAinsvcExtLnpFailNetw	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The number of LNP translation queries that resulted in a failed external query to a network database due to a network communication failure from the reporting feature server"

	::=  {  statAINSVCEntry  80  }

statAINSVCAinsvcSipReferWReplacesRx	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The number of SIP REFER with REPLACES messages the reporting call agent or feature server received"

	::=  {  statAINSVCEntry  81  }

statAINSVCAinsvcSipMWINotifyTx	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The number of SIP Notify MWIs sent to SIP phones by the reporting call agent"

	::=  {  statAINSVCEntry  82  }

statAINSVCAinsvcSipMWINotifyTxFail	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The number of SIP Notify MWIs failed to be sent to SIP phones by the reporting call agent"

	::=  {  statAINSVCEntry  83  }

statAINSVCAinsvcSipMWINofifyRx	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The number of SIP Notify MWIs received from SIP subscribers by the reporting call agent"

	::=  {  statAINSVCEntry  84  }

statAINSVCAinsvcExt8xxQueryFail	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The number of 8XX queries that failed due to an SCP timeout when attempted by the reporting feature server"

	::=  {  statAINSVCEntry  85  }

statAINSVCAinsvcExtLnpQueryLrn	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The number of LNP queries that resulted in a successful response from the SCP with an LRN when attempted by the reporting feature server"

	::=  {  statAINSVCEntry  86  }

statAINSVCAinsvcExtLnpQueryFail	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The number of LNP queries that failed due to an SCP timeout when attempted by the reporting feature server"

	::=  {  statAINSVCEntry  87  }


statINAPTable	OBJECT-TYPE
	SYNTAX	SEQUENCE  OF  StatINAPEntry
	MAX-ACCESS	not-accessible
	STATUS	current
 	DESCRIPTION
		"INAP related protocol statistics."
	::=  { fsAinStatistics  3 }

statINAPEntry	OBJECT-TYPE
	SYNTAX	StatINAPEntry
	MAX-ACCESS	not-accessible
	STATUS	current
 	DESCRIPTION
		"Row description for INAP related protocol statistics Table."
	INDEX	{  statINAPComponentID  }
	::=  { statINAPTable 1 }

StatINAPEntry  ::=  SEQUENCE {
	statINAPComponentID  DisplayString,
	statINAPDOW  DayOfWeek,
	statINAPTOD  TimeOfDay,
	statINAPCancelRx		Counter32,
	statINAPCancelTx		Counter32,
	statINAPUnrecogInvokeIdRx		Counter32,
	statINAPUnrecogInvokeIdTx		Counter32,
	statINAPDatabseErrRx		Counter32,
	statINAPDatabaseErrTx		Counter32,
	statINAPEtcFailRx		Counter32,
	statINAPEtcFailTx		Counter32,
	statINAPImpropCallerRspRx		Counter32,
	statINAPImpropCallerRspTx		Counter32,
	statINAPInfoKeyErrRx		Counter32,
	statINAPInfoKeyErrTx		Counter32,
	statINAPMissingCustRecRx		Counter32,
	statINAPMissingCustRecTx		Counter32,
	statINAPMissingParmRx		Counter32,
	statINAPMissingParmTx		Counter32,
	statINAPParmOutOfRangeRx		Counter32,
	statINAPParmOutOfRangeTx		Counter32,
	statINAPReferralRx		Counter32,
	statINAPReferralTx		Counter32,
	statINAPReqInfoRx		Counter32,
	statINAPReqInfoTx		Counter32,
	statINAPSysFailRx		Counter32,
	statINAPSysFailTx		Counter32,
	statINAPTaskRefusedRx		Counter32,
	statINAPTaskRefusedTx		Counter32,
	statINAPUnavilRsrcRx		Counter32,
	statINAPUnavilRsrcTx		Counter32,
	statINAPUnexpectCompSeqRx		Counter32,
	statINAPUnexpectCompSeqTx		Counter32,
	statINAPUnexpectDataValRx		Counter32,
	statINAPUnexpectDataValTx		Counter32,
	statINAPUnexpectParmRx		Counter32,
	statINAPUnexpectParmTx		Counter32,
	statINAPUnknownLegIdRx		Counter32,
	statINAPUnknownLegIdTx		Counter32,
	statINAPUnknownRsrcRx		Counter32,
	statINAPUnknownRsrcTx		Counter32,
	statINAPReportErrRx		Counter32,
	statINAPReportErrTx		Counter32,
	statINAPNumChannelBusy		Counter32,
	statINAPNumRsrcNotAvail		Counter32,
	statINAPNumRsrcNotSupp		Counter32,
	statINAPNumTaskRefused		Counter32,
	statINAPNumInvalidCallerRsp		Counter32,
	statINAPNumCapabFail		Counter32,
	statINAPNumSupplSvcInvoke		Counter32,
	statINAPNumSendRscrCancel		Counter32,
	statINAPNumTempFail		Counter32,
	statINAPNumIpTmo		Counter32,
	statINAPNumUnauthReq		Counter32,
	statINAPNumUnauthDest		Counter32,
	statINAPNumProcedErr		Counter32
	}
statINAPComponentID	OBJECT-TYPE 
	SYNTAX	DisplayString 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"INAP Component Identifier"
	
	::=  {  statINAPEntry  1  }

statINAPDOW	OBJECT-TYPE 
	SYNTAX	DayOfWeek 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"Day of week statistics was collected."
	
	::=  {  statINAPEntry  2  }

statINAPTOD	OBJECT-TYPE 
	SYNTAX	TimeOfDay 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"Time of day statistics was collected in XX minutes interval"
	
	::=  {  statINAPEntry  3  }

statINAPCancelRx	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of cancels messages received by the reporting feature server"

	::=  {  statINAPEntry  4  }

statINAPCancelTx	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of cancels messages transmitted by the reporting feature server"

	::=  {  statINAPEntry  5  }

statINAPUnrecogInvokeIdRx	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of unrecognized invoke id messages received by the reporting feature server"

	::=  {  statINAPEntry  6  }

statINAPUnrecogInvokeIdTx	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of unrecognized invoke id messages sent by the reporting feature server"

	::=  {  statINAPEntry  7  }

statINAPDatabseErrRx	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of database error messages received by the reporting feature server"

	::=  {  statINAPEntry  8  }

statINAPDatabaseErrTx	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of database error messages sent by the reporting feature server"

	::=  {  statINAPEntry  9  }

statINAPEtcFailRx	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of etc failure messages received by the reporting feature server"

	::=  {  statINAPEntry  10  }

statINAPEtcFailTx	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of etc failure messages sent by the reporting feature server"

	::=  {  statINAPEntry  11  }

statINAPImpropCallerRspRx	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of improper caller response messages received by the reporting feature server"

	::=  {  statINAPEntry  12  }

statINAPImpropCallerRspTx	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of improper caller response messages sent by the reporting feature server"

	::=  {  statINAPEntry  13  }

statINAPInfoKeyErrRx	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of information key error messages received by the reporting feature server"

	::=  {  statINAPEntry  14  }

statINAPInfoKeyErrTx	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of information key error messages sent by the reporting feature server"

	::=  {  statINAPEntry  15  }

statINAPMissingCustRecRx	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of missing customer record messages received by the reporting feature server"

	::=  {  statINAPEntry  16  }

statINAPMissingCustRecTx	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of missing customer record messages sent by the reporting feature server"

	::=  {  statINAPEntry  17  }

statINAPMissingParmRx	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of missing parameter messages received by the reporting feature server"

	::=  {  statINAPEntry  18  }

statINAPMissingParmTx	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of missing parameter messages sent by the reporting feature server"

	::=  {  statINAPEntry  19  }

statINAPParmOutOfRangeRx	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of parameter out of range messages received by the reporting feature server"

	::=  {  statINAPEntry  20  }

statINAPParmOutOfRangeTx	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of parameter out of range messages sent by the reporting feature server"

	::=  {  statINAPEntry  21  }

statINAPReferralRx	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of referral messages received by the reporting feature server"

	::=  {  statINAPEntry  22  }

statINAPReferralTx	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of referral messages sent by the reporting feature server"

	::=  {  statINAPEntry  23  }

statINAPReqInfoRx	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of request information messages received by the reporting feature server"

	::=  {  statINAPEntry  24  }

statINAPReqInfoTx	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of request information messages sent by the reporting feature server"

	::=  {  statINAPEntry  25  }

statINAPSysFailRx	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of system failure messages received by the reporting feature server"

	::=  {  statINAPEntry  26  }

statINAPSysFailTx	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of system failure messages sent by the reporting feature server"

	::=  {  statINAPEntry  27  }

statINAPTaskRefusedRx	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of task refused messages received by the reporting feature server"

	::=  {  statINAPEntry  28  }

statINAPTaskRefusedTx	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of task refused messages sent by the reporting feature server"

	::=  {  statINAPEntry  29  }

statINAPUnavilRsrcRx	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of unavailable resource messages received by the reporting feature server"

	::=  {  statINAPEntry  30  }

statINAPUnavilRsrcTx	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of unavailable resource messages sent by the reporting feature server"

	::=  {  statINAPEntry  31  }

statINAPUnexpectCompSeqRx	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of unexpected component sequence messages received by the reporting feature server"

	::=  {  statINAPEntry  32  }

statINAPUnexpectCompSeqTx	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of unexpected component sequence messages sent by the reporting feature server"

	::=  {  statINAPEntry  33  }

statINAPUnexpectDataValRx	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of unexpected data value messages received by the reporting feature server"

	::=  {  statINAPEntry  34  }

statINAPUnexpectDataValTx	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of unexpected data value messages sent by the reporting feature server"

	::=  {  statINAPEntry  35  }

statINAPUnexpectParmRx	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of unexpected parameter messages received by the reporting feature server"

	::=  {  statINAPEntry  36  }

statINAPUnexpectParmTx	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of unexpected parameter messages sent by the reporting feature server"

	::=  {  statINAPEntry  37  }

statINAPUnknownLegIdRx	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of unknown leg id messages received by the reporting feature server"

	::=  {  statINAPEntry  38  }

statINAPUnknownLegIdTx	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of unknown leg id messages sent by the reporting feature server"

	::=  {  statINAPEntry  39  }

statINAPUnknownRsrcRx	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of unknown resource messages received by the reporting feature server"

	::=  {  statINAPEntry  40  }

statINAPUnknownRsrcTx	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of unknown resource messages sent by the reporting feature server"

	::=  {  statINAPEntry  41  }

statINAPReportErrRx	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of report error messages received by the reporting feature server"

	::=  {  statINAPEntry  42  }

statINAPReportErrTx	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of report error messages sent by the reporting feature server"

	::=  {  statINAPEntry  43  }

statINAPNumChannelBusy	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of times a channel busy situation occurred on the reporting feature server"

	::=  {  statINAPEntry  44  }

statINAPNumRsrcNotAvail	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of times a resource not available situation occurred on the reporting feature server"

	::=  {  statINAPEntry  45  }

statINAPNumRsrcNotSupp	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of times a resource not supported situation occurred on the reporting feature server"

	::=  {  statINAPEntry  46  }

statINAPNumTaskRefused	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of times a task refused situation occurred on the reporting feature server"

	::=  {  statINAPEntry  47  }

statINAPNumInvalidCallerRsp	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of times an invalid caller response situation occurred on the reporting feature server"

	::=  {  statINAPEntry  48  }

statINAPNumCapabFail	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of times a capability failure situation occurred on the reporting feature server"

	::=  {  statINAPEntry  49  }

statINAPNumSupplSvcInvoke	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of times a supplementary service invoke situation occurred on the reporting feature server"

	::=  {  statINAPEntry  50  }

statINAPNumSendRscrCancel	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of times a send to resource request cancelled situation occurred on the reporting feature server"

	::=  {  statINAPEntry  51  }

statINAPNumTempFail	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of times a temporary failure situation occurred on the reporting feature server"

	::=  {  statINAPEntry  52  }

statINAPNumIpTmo	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of times an IP timeout situation occurred on the reporting feature server"

	::=  {  statINAPEntry  53  }

statINAPNumUnauthReq	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of times an unauthorized request situation occurred on the reporting feature server"

	::=  {  statINAPEntry  54  }

statINAPNumUnauthDest	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of times an unauthorized destination situation occurred on the reporting feature server"

	::=  {  statINAPEntry  55  }

statINAPNumProcedErr	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of times a procedural error situation occurred on the reporting feature server"

	::=  {  statINAPEntry  56  }


statTSATable	OBJECT-TYPE
	SYNTAX	SEQUENCE  OF  StatTSAEntry
	MAX-ACCESS	not-accessible
	STATUS	current
 	DESCRIPTION
		"TSA application related statistics."
	::=  { fsAinStatistics  4 }

statTSAEntry	OBJECT-TYPE
	SYNTAX	StatTSAEntry
	MAX-ACCESS	not-accessible
	STATUS	current
 	DESCRIPTION
		"Row description for TSA application related statistics Table."
	INDEX	{  statTSAComponentID  }
	::=  { statTSATable 1 }

StatTSAEntry  ::=  SEQUENCE {
	statTSAComponentID  DisplayString,
	statTSADOW  DayOfWeek,
	statTSATOD  TimeOfDay,
	statTSAOperationReqRx		Counter32,
	statTSAOperationConfirmRx		Counter32,
	statTSAOperationIndRx		Counter32,
	statTSAComponentReqRx		Counter32,
	statTSAComponentConfirmRx		Counter32,
	statTSAComponentIndRx		Counter32,
	statTSADataIndRx		Counter32,
	statTSAUdataIndRx		Counter32,
	statTSADataReqRx		Counter32,
	statTSADelimiterReqRx		Counter32,
	statTSADelimiterIndRx		Counter32,
	statTSAOpenIndRx		Counter32,
	statTSAOpenConfirmRx		Counter32,
	statTSAStatusIndRx		Counter32,
	statTSADialogConfirmRx		Counter32,
	statTSACloseIndRx		Counter32,
	statTSAAbortIndRx		Counter32,
	statTSATcapBindConfirmRx		Counter32,
	statTSATcapStatConfirmRx		Counter32,
	statTSATcapNoticeIndRx		Counter32,
	statTSATcapStatIndRx		Counter32,
	statTSAInapNoticeIndRx		Counter32,
	statTSAInapStatIndRx		Counter32,
	statTSAInapStatConfirmRx		Counter32,
	statTSAInapBindConfirmRx		Counter32
	}
statTSAComponentID	OBJECT-TYPE 
	SYNTAX	DisplayString 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"TSA Component Identifier"
	
	::=  {  statTSAEntry  1  }

statTSADOW	OBJECT-TYPE 
	SYNTAX	DayOfWeek 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"Day of week statistics was collected."
	
	::=  {  statTSAEntry  2  }

statTSATOD	OBJECT-TYPE 
	SYNTAX	TimeOfDay 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"Time of day statistics was collected in XX minutes interval"
	
	::=  {  statTSAEntry  3  }

statTSAOperationReqRx	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of operation request messages received on the reporting feature server"

	::=  {  statTSAEntry  4  }

statTSAOperationConfirmRx	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of operation confirm messages received on the reporting feature server"

	::=  {  statTSAEntry  5  }

statTSAOperationIndRx	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of operation indication messages received on the reporting feature server"

	::=  {  statTSAEntry  6  }

statTSAComponentReqRx	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of component request messages received on the reporting feature server"

	::=  {  statTSAEntry  7  }

statTSAComponentConfirmRx	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of component confirm messages received on the reporting feature server"

	::=  {  statTSAEntry  8  }

statTSAComponentIndRx	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of component indication messages received on the reporting feature server"

	::=  {  statTSAEntry  9  }

statTSADataIndRx	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of data indication messages received on the reporting feature server"

	::=  {  statTSAEntry  10  }

statTSAUdataIndRx	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of udata indication messages received on the reporting feature server"

	::=  {  statTSAEntry  11  }

statTSADataReqRx	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of data request messages received on the reporting feature server"

	::=  {  statTSAEntry  12  }

statTSADelimiterReqRx	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of delimiter request messages received on the reporting feature server"

	::=  {  statTSAEntry  13  }

statTSADelimiterIndRx	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of delimiter indication messages received on the reporting feature server"

	::=  {  statTSAEntry  14  }

statTSAOpenIndRx	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of open indication messages received on the reporting feature server"

	::=  {  statTSAEntry  15  }

statTSAOpenConfirmRx	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of open confirm messages received on the reporting feature server"

	::=  {  statTSAEntry  16  }

statTSAStatusIndRx	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of status indication messages received on the reporting feature server"

	::=  {  statTSAEntry  17  }

statTSADialogConfirmRx	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of dialog confirm messages received on the reporting feature server"

	::=  {  statTSAEntry  18  }

statTSACloseIndRx	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of close indication messages received on the reporting feature server"

	::=  {  statTSAEntry  19  }

statTSAAbortIndRx	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of abort indication messages received on the reporting feature server"

	::=  {  statTSAEntry  20  }

statTSATcapBindConfirmRx	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of TCAP bind confirm messages received on the reporting feature server"

	::=  {  statTSAEntry  21  }

statTSATcapStatConfirmRx	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of TCAP statistics confirm messages received on the reporting feature server"

	::=  {  statTSAEntry  22  }

statTSATcapNoticeIndRx	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of TCAP notice indication messages received on the reporting feature server"

	::=  {  statTSAEntry  23  }

statTSATcapStatIndRx	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of TCAP statistics indication messages received on the reporting feature server"

	::=  {  statTSAEntry  24  }

statTSAInapNoticeIndRx	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of INAP notice indication messages received on the reporting feature server"

	::=  {  statTSAEntry  25  }

statTSAInapStatIndRx	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of INAP statistics indication messages received on the reporting feature server"

	::=  {  statTSAEntry  26  }

statTSAInapStatConfirmRx	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of INAP statistics confirm messages received on the reporting feature server"

	::=  {  statTSAEntry  27  }

statTSAInapBindConfirmRx	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of INAP bind confirm messages received on the reporting feature server"

	::=  {  statTSAEntry  28  }

statAINToolsTable	OBJECT-TYPE
	SYNTAX	SEQUENCE  OF  StatAINToolsEntry
	MAX-ACCESS	not-accessible
	STATUS	current
 	DESCRIPTION
		"Metrics related to invocations of the TollFree and LNP Query Verification Tools."
	::=  { fsAinStatistics  5 }

statAINToolsEntry	OBJECT-TYPE
	SYNTAX	StatAINToolsEntry
	MAX-ACCESS	not-accessible
	STATUS	current
 	DESCRIPTION
		"Row description for metrics related to invocations of the TollFree and LNP Query 
		Verification Tools related statistics Table."
	INDEX	{  statAINToolsComponentID  }
	::=  { statAINToolsTable 1 }

StatAINToolsEntry  ::=  SEQUENCE {
	statAINToolsComponentID  DisplayString,
	statAINToolsDOW  DayOfWeek,
	statAINToolsTOD  TimeOfDay,
	statAINToolsLNPQueryAttmp		Counter32,
	statAINToolsLNPQuerySucc		Counter32,
	statAINToolsTollfreeQueryAttmp		Counter32,
	statAINToolsTollfreeQuerySucc		Counter32
	}
statAINToolsComponentID	OBJECT-TYPE 
	SYNTAX	DisplayString 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"AIN Tools Component Identifier"
	
	::=  {  statAINToolsEntry  1  }

statAINToolsDOW	OBJECT-TYPE 
	SYNTAX	DayOfWeek 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"Day of week statistics was collected."
	
	::=  {  statAINToolsEntry  2  }

statAINToolsTOD	OBJECT-TYPE 
	SYNTAX	TimeOfDay 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"Time of day statistics was collected in XX minutes interval"
	
	::=  {  statAINToolsEntry  3  }

statAINToolsLNPQueryAttmp	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of times the reporting feature server received a request 
		to perform an LNP query from the QVT tool."

	::=  {  statAINToolsEntry  4  }

statAINToolsLNPQuerySucc	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of times the reporting feature server received a 
		request to perform an LNP query from the QVT tool and completed it 
		successfully."

	::=  {  statAINToolsEntry  5  }

statAINToolsTollfreeQueryAttmp	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of times the reporting feature server received a request 
		to perform a Toll Free query from the QVT tool."

	::=  {  statAINToolsEntry  6  }

statAINToolsTollfreeQuerySucc	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of times the reporting feature server received a request 
		to perform a Toll Free query from the QVT tool and completed it successfully."

	::=  {  statAINToolsEntry  7  }


statTCAPTable	OBJECT-TYPE
	SYNTAX	SEQUENCE  OF  StatTCAPEntry
	MAX-ACCESS	not-accessible
	STATUS	current
 	DESCRIPTION
		"TCAP related protocol statistics."
	::=  { fsStatistics  1 }

statTCAPEntry	OBJECT-TYPE
	SYNTAX	StatTCAPEntry
	MAX-ACCESS	not-accessible
	STATUS	current
 	DESCRIPTION
		"Row description for TCAP related protocol statistics Table."
	INDEX	{  statTCAPComponentID  }
	::=  { statTCAPTable 1 }

StatTCAPEntry  ::=  SEQUENCE {
	statTCAPComponentID  DisplayString,
	statTCAPDOW  DayOfWeek,
	statTCAPTOD  TimeOfDay,
	statTCAPTotalMsgRcv		Counter32,
	statTCAPTotalMsgXmit		Counter32,
	statTCAPTotalUniMsgRcv		Counter32,
	statTCAPTotalUniMsgXmit		Counter32,
	statTCAPAbortMsgRcv		Counter32,
	statTCAPAbortMsgXmit		Counter32,
	statTCAPBeginMsgRcv		Counter32,
	statTCAPBeginMsgXmit		Counter32,
	statTCAPContMsgRcv		Counter32,
	statTCAPContMsgXmit		Counter32,
	statTCAPEndMsgRcv		Counter32,
	statTCAPEndMsgXmit		Counter32,
	statTCAPPermissQueryRcv		Counter32,
	statTCAPPermissQueryXmit		Counter32,
	statTCAPNoPermissQueryRcv		Counter32,
	statTCAPNoPermissQueryXmit		Counter32,
	statTCAPPermissConversRcv		Counter32,
	statTCAPPermissConversXmit		Counter32,
	statTCAPNoPermissConversRcv		Counter32,
	statTCAPNoPermissConversXmit		Counter32,
	statTCAPRspRcv		Counter32,
	statTCAPRspXmit		Counter32,
	statTCAPTotalCompRcv		Counter32,
	statTCAPTotalCompXmit		Counter32,
	statTCAPInvokeCompRcv		Counter32,
	statTCAPInvokeCompXmit		Counter32,
	statTCAPReturnResultCompRcv		Counter32,
	statTCAPReturnResultCompXmit		Counter32,
	statTCAPReturnErrCompRcv		Counter32,
	statTCAPReturnErrCompXmit		Counter32,
	statTCAPRejectCompRcv		Counter32,
	statTCAPRejectCompXmit		Counter32,
	statTCAPActTransactions		Counter32,
	statTCAPActInvocations		Counter32,
	statTCAPTransactionIdsInuse		Counter32,
	statTCAPTotalDroppedMsgRcv		Counter32,
	statTCAPUnrecogMsgTypeRcv		Counter32,
	statTCAPUnrecogMsgTypeXmit		Counter32,
	statTCAPIncorrectTransPortRcv		Counter32,
	statTCAPIncorrectTransPortXmit		Counter32,
	statTCAPBadStructTransPortRcv		Counter32,
	statTCAPBadStructTransPortXmit		Counter32,
	statTCAPUnrecogTransIdRcv		Counter32,
	statTCAPUnrecogTransIdXmit		Counter32,
	statTCAPRscrLimitRcv		Counter32,
	statTCAPRscrLimitXmit		Counter32,
	statTCAPTransPortPermRelRcv		Counter32,
	statTCAPTransPortPermRelXmit		Counter32,
	statTCAPUnrecogDialogPortIdRcv		Counter32,
	statTCAPUnrecogDialogPortIdXmit		Counter32,
	statTCAPBadStructDialogPortRcv		Counter32,
	statTCAPBadStructDialogPortXmit		Counter32,
	statTCAPMissingDialogPortRcv		Counter32,
	statTCAPMissingDialogPortXmit		Counter32,
	statTCAPInconsistDialogPortRcv		Counter32,
	statTCAPInconsistDialogPortXmit		Counter32,
	statTCAPUnrecogCompRcv		Counter32,
	statTCAPUnrecogCompXmit		Counter32,
	statTCAPIncorrectCompPortRcv		Counter32,
	statTCAPIncorrectCompPortXmit		Counter32,
	statTCAPBadStructCompPortRcv		Counter32,
	statTCAPBadStructCompPortXmit		Counter32,
	statTCAPDupInvokeIdRcv		Counter32,
	statTCAPDupInvokeIdXmit		Counter32,
	statTCAPUnrecogOpcodeRcv		Counter32,
	statTCAPUnrecogOpcodeXmit		Counter32,
	statTCAPIncorrectParamRcv		Counter32,
	statTCAPIncorrectParamXmit		Counter32,
	statTCAPUnrecogLinkIdRcv		Counter32,
	statTCAPUnrecogLinkIdXmit		Counter32,
	statTCAPInitRelRcv		Counter32,
	statTCAPInitRelXmit		Counter32,
	statTCAPUnexpectLinkRspRcv		Counter32,
	statTCAPUnexpectLinkRspXmit		Counter32,
	statTCAPUnexpectLinkOperRcv		Counter32,
	statTCAPUnexpectLinkOperXmit		Counter32,
	statTCAPUnrecogReInvokeIdRcv		Counter32,
	statTCAPUnrecogReInvokeIdXmit		Counter32,
	statTCAPUnexpectRrRcv		Counter32,
	statTCAPUnexpectRrXmit		Counter32,
	statTCAPIncorrectParamRrRcv		Counter32,
	statTCAPIncorrectParamRrXmit		Counter32,
	statTCAPUnrecogInvokeIdRcv		Counter32,
	statTCAPUnrecogInvokeIdXmit		Counter32,
	statTCAPUnexpectReRcv		Counter32,
	statTCAPUnexpectReXmit		Counter32,
	statTCAPIncorrectCompEncodeRcv		Counter32,
	statTCAPIncorrectCompEncodeXmit		Counter32,
	statTCAPInvokeRscrLimitProbRcv		Counter32,
	statTCAPInvokeRscrLimitProbXmit		Counter32,
	statTCAPUnrecogErrCodeRcv		Counter32,
	statTCAPUnrecogErrCodeXmit		Counter32,
	statTCAPUnexpectErrCodeRcv		Counter32,
	statTCAPUnexpectErrCodeXmit		Counter32,
	statTCAPIncorrectParamReRcv		Counter32,
	statTCAPIncorrectParamReXmit		Counter32
	}
statTCAPComponentID	OBJECT-TYPE 
	SYNTAX	DisplayString 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"TCAP Component Identifier"
	
	::=  {  statTCAPEntry  1  }

statTCAPDOW	OBJECT-TYPE 
	SYNTAX	DayOfWeek 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"Day of week statistics was collected."
	
	::=  {  statTCAPEntry  2  }

statTCAPTOD	OBJECT-TYPE 
	SYNTAX	TimeOfDay 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"Time of day statistics was collected in XX minutes interval"
	
	::=  {  statTCAPEntry  3  }

statTCAPTotalMsgRcv	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of messages received by the reporting feature server"

	::=  {  statTCAPEntry  4  }

statTCAPTotalMsgXmit	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of messages sent by the reporting feature server"

	::=  {  statTCAPEntry  5  }

statTCAPTotalUniMsgRcv	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of unidirectional messages received by the reporting feature server"

	::=  {  statTCAPEntry  6  }

statTCAPTotalUniMsgXmit	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of unidirectional messages sent by the reporting feature server"

	::=  {  statTCAPEntry  7  }

statTCAPAbortMsgRcv	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of abort messages received on the reporting feature server"

	::=  {  statTCAPEntry  8  }

statTCAPAbortMsgXmit	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of abort messages sent by the reporting feature server"

	::=  {  statTCAPEntry  9  }

statTCAPBeginMsgRcv	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of begin messages received on the reporting feature server"

	::=  {  statTCAPEntry  10  }

statTCAPBeginMsgXmit	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of begin messages sent by the reporting feature server"

	::=  {  statTCAPEntry  11  }

statTCAPContMsgRcv	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of continue messages received on the reporting feature server"

	::=  {  statTCAPEntry  12  }

statTCAPContMsgXmit	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of continue messages sent by the reporting feature server"

	::=  {  statTCAPEntry  13  }

statTCAPEndMsgRcv	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of end messages received on the reporting feature server"

	::=  {  statTCAPEntry  14  }

statTCAPEndMsgXmit	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of end messages sent by the reporting feature server"

	::=  {  statTCAPEntry  15  }

statTCAPPermissQueryRcv	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of query with permission messages received on the reporting feature server"

	::=  {  statTCAPEntry  16  }

statTCAPPermissQueryXmit	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of query with permission messages sent by the reporting feature server"

	::=  {  statTCAPEntry  17  }

statTCAPNoPermissQueryRcv	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of query without permission messages received on the reporting feature server"

	::=  {  statTCAPEntry  18  }

statTCAPNoPermissQueryXmit	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of query without permission messages sent by the reporting feature server"

	::=  {  statTCAPEntry  19  }

statTCAPPermissConversRcv	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of conversation with permission messages received on the reporting feature server"

	::=  {  statTCAPEntry  20  }

statTCAPPermissConversXmit	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of conversation with permission messages sent by the reporting feature server"

	::=  {  statTCAPEntry  21  }

statTCAPNoPermissConversRcv	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of conversation without permission messages received on the reporting feature server"

	::=  {  statTCAPEntry  22  }

statTCAPNoPermissConversXmit	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of conversation without permission messages sent by the reporting feature server"

	::=  {  statTCAPEntry  23  }

statTCAPRspRcv	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of response messages received on the reporting feature server"

	::=  {  statTCAPEntry  24  }

statTCAPRspXmit	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of response messages sent by the reporting feature server"

	::=  {  statTCAPEntry  25  }

statTCAPTotalCompRcv	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of components received on the reporting feature server"

	::=  {  statTCAPEntry  26  }

statTCAPTotalCompXmit	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of components sent by the reporting feature server"

	::=  {  statTCAPEntry  27  }

statTCAPInvokeCompRcv	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of invoke components received on the reporting feature server"

	::=  {  statTCAPEntry  28  }

statTCAPInvokeCompXmit	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of invoke components sent by the reporting feature server"

	::=  {  statTCAPEntry  29  }

statTCAPReturnResultCompRcv	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of return-result components received on the reporting feature server"

	::=  {  statTCAPEntry  30  }

statTCAPReturnResultCompXmit	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of return-result components sent by the reporting feature server"

	::=  {  statTCAPEntry  31  }

statTCAPReturnErrCompRcv	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of return-error components received on the reporting feature server"

	::=  {  statTCAPEntry  32  }

statTCAPReturnErrCompXmit	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of return-error components sent by the reporting feature server"

	::=  {  statTCAPEntry  33  }

statTCAPRejectCompRcv	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of reject components received on the reporting feature server"

	::=  {  statTCAPEntry  34  }

statTCAPRejectCompXmit	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of reject components sent by the reporting feature server"

	::=  {  statTCAPEntry  35  }

statTCAPActTransactions	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of active transactions on the reporting feature server"

	::=  {  statTCAPEntry  36  }

statTCAPActInvocations	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of active invocations on the reporting feature server"

	::=  {  statTCAPEntry  37  }

statTCAPTransactionIdsInuse	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of transaction ids in use on the reporting feature server"

	::=  {  statTCAPEntry  38  }

statTCAPTotalDroppedMsgRcv	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of received messages dropped on the reporting feature server"

	::=  {  statTCAPEntry  39  }

statTCAPUnrecogMsgTypeRcv	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of unrecognized messages types received on the reporting feature server"

	::=  {  statTCAPEntry  40  }

statTCAPUnrecogMsgTypeXmit	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of unrecognized messages types sent by the reporting feature server"

	::=  {  statTCAPEntry  41  }

statTCAPIncorrectTransPortRcv	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of incorrect transaction portions received on the reporting feature server"

	::=  {  statTCAPEntry  42  }

statTCAPIncorrectTransPortXmit	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of incorrect transaction portions sent by the reporting feature server"

	::=  {  statTCAPEntry  43  }

statTCAPBadStructTransPortRcv	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of badly structured transaction portions received on the reporting feature server"

	::=  {  statTCAPEntry  44  }

statTCAPBadStructTransPortXmit	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of badly structured transaction portions sent by the reporting feature server"

	::=  {  statTCAPEntry  45  }

statTCAPUnrecogTransIdRcv	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of unrecognized transaction ids received on the reporting feature server"

	::=  {  statTCAPEntry  46  }

statTCAPUnrecogTransIdXmit	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of unrecognized transaction ids sent by the reporting feature server"

	::=  {  statTCAPEntry  47  }

statTCAPRscrLimitRcv	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of resource limitations received on the reporting feature server"

	::=  {  statTCAPEntry  48  }

statTCAPRscrLimitXmit	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of resource limitations sent by the reporting feature server"

	::=  {  statTCAPEntry  49  }

statTCAPTransPortPermRelRcv	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of transaction portion permission to release problems received on the reporting feature server"

	::=  {  statTCAPEntry  50  }

statTCAPTransPortPermRelXmit	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of transaction portion permission to release problems sent by the reporting feature server"

	::=  {  statTCAPEntry  51  }

statTCAPUnrecogDialogPortIdRcv	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of unrecognized dialog portion ids received on the reporting feature server"

	::=  {  statTCAPEntry  52  }

statTCAPUnrecogDialogPortIdXmit	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of unrecognized dialog portion ids sent by the reporting feature server"

	::=  {  statTCAPEntry  53  }

statTCAPBadStructDialogPortRcv	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of badly structured dialog portions received on the reporting feature server"

	::=  {  statTCAPEntry  54  }

statTCAPBadStructDialogPortXmit	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of badly structured dialog portions sent by the reporting feature server"

	::=  {  statTCAPEntry  55  }

statTCAPMissingDialogPortRcv	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of missing dialog portions received on the reporting feature server"

	::=  {  statTCAPEntry  56  }

statTCAPMissingDialogPortXmit	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of missing dialog portions sent by the reporting feature server"

	::=  {  statTCAPEntry  57  }

statTCAPInconsistDialogPortRcv	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of inconsistent dialog portions received on the reporting feature server"

	::=  {  statTCAPEntry  58  }

statTCAPInconsistDialogPortXmit	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of inconsistent dialog portions sent by the reporting feature server"

	::=  {  statTCAPEntry  59  }

statTCAPUnrecogCompRcv	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of unrecognized components received on the reporting feature server"

	::=  {  statTCAPEntry  60  }

statTCAPUnrecogCompXmit	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of unrecognized components sent by the reporting feature server"

	::=  {  statTCAPEntry  61  }

statTCAPIncorrectCompPortRcv	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of incorrect component portions received on the reporting feature server"

	::=  {  statTCAPEntry  62  }

statTCAPIncorrectCompPortXmit	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of incorrect component portions sent by the reporting feature server"

	::=  {  statTCAPEntry  63  }

statTCAPBadStructCompPortRcv	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of badly structured component portions received on the reporting feature server"

	::=  {  statTCAPEntry  64  }

statTCAPBadStructCompPortXmit	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of badly structured component portions sent by the reporting feature server"

	::=  {  statTCAPEntry  65  }

statTCAPDupInvokeIdRcv	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of duplicate invoke ids received on the reporting feature server"

	::=  {  statTCAPEntry  66  }

statTCAPDupInvokeIdXmit	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of duplicate invoke ids sent by the reporting feature server"

	::=  {  statTCAPEntry  67  }

statTCAPUnrecogOpcodeRcv	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of unrecognized opcodes received on the reporting feature server"

	::=  {  statTCAPEntry  68  }

statTCAPUnrecogOpcodeXmit	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of unrecognized opcodes sent by the reporting feature server"

	::=  {  statTCAPEntry  69  }

statTCAPIncorrectParamRcv	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of incorrect parameters received on the reporting feature server"

	::=  {  statTCAPEntry  70  }

statTCAPIncorrectParamXmit	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of incorrect parameters sent by the reporting feature server"

	::=  {  statTCAPEntry  71  }

statTCAPUnrecogLinkIdRcv	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of unrecognized link ids received on the reporting feature server"

	::=  {  statTCAPEntry  72  }

statTCAPUnrecogLinkIdXmit	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of unrecognized link ids sent by the reporting feature server"

	::=  {  statTCAPEntry  73  }

statTCAPInitRelRcv	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of initiating releases received on the reporting feature server"

	::=  {  statTCAPEntry  74  }

statTCAPInitRelXmit	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of initiating releases sent by the reporting feature server"

	::=  {  statTCAPEntry  75  }

statTCAPUnexpectLinkRspRcv	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of unexpected link responses received on the reporting feature server"

	::=  {  statTCAPEntry  76  }

statTCAPUnexpectLinkRspXmit	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of unexpected link responses sent by the reporting feature server"

	::=  {  statTCAPEntry  77  }

statTCAPUnexpectLinkOperRcv	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of unexpected link operations received on the reporting feature server"

	::=  {  statTCAPEntry  78  }

statTCAPUnexpectLinkOperXmit	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of unexpected link operations sent by the reporting feature server"

	::=  {  statTCAPEntry  79  }

statTCAPUnrecogReInvokeIdRcv	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of unrecognized invoke ids on return-error received on the reporting feature server"

	::=  {  statTCAPEntry  80  }

statTCAPUnrecogReInvokeIdXmit	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of unrecognized invoke ids on return-error sent by the reporting feature server"

	::=  {  statTCAPEntry  81  }

statTCAPUnexpectRrRcv	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of unexpected return-results received on the reporting feature server"

	::=  {  statTCAPEntry  82  }

statTCAPUnexpectRrXmit	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of unexpected return-results sent by the reporting feature server"

	::=  {  statTCAPEntry  83  }

statTCAPIncorrectParamRrRcv	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of incorrect parameters on return-results received on the reporting feature server"

	::=  {  statTCAPEntry  84  }

statTCAPIncorrectParamRrXmit	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of incorrect parameters on return-results sent by the reporting feature server"

	::=  {  statTCAPEntry  85  }

statTCAPUnrecogInvokeIdRcv	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of unrecognized invoke ids on return-results received on the reporting feature server"

	::=  {  statTCAPEntry  86  }

statTCAPUnrecogInvokeIdXmit	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of unrecognized invoke ids on return results sent by the reporting feature server"

	::=  {  statTCAPEntry  87  }

statTCAPUnexpectReRcv	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of unexpected return error received on the reporting feature server"

	::=  {  statTCAPEntry  88  }

statTCAPUnexpectReXmit	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of unexpected return error sent by the reporting feature server"

	::=  {  statTCAPEntry  89  }

statTCAPIncorrectCompEncodeRcv	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of incorrect component encoding errors received on the reporting feature server"

	::=  {  statTCAPEntry  90  }

statTCAPIncorrectCompEncodeXmit	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of incorrect component encoding errors sent by the reporting feature server"

	::=  {  statTCAPEntry  91  }

statTCAPInvokeRscrLimitProbRcv	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of resource limitation invoke problems received on the reporting feature server"

	::=  {  statTCAPEntry  92  }

statTCAPInvokeRscrLimitProbXmit	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of resource limitation invoke problems sent by the reporting feature server"

	::=  {  statTCAPEntry  93  }

statTCAPUnrecogErrCodeRcv	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of unrecognized error codes on return-error received on the reporting feature server"

	::=  {  statTCAPEntry  94  }

statTCAPUnrecogErrCodeXmit	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of unrecognized error codes on return-error sent by the reporting feature server"

	::=  {  statTCAPEntry  95  }

statTCAPUnexpectErrCodeRcv	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of unexpected error codes on return-error received on the reporting feature server"

	::=  {  statTCAPEntry  96  }

statTCAPUnexpectErrCodeXmit	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of unexpected error codes on return-error sent by the reporting feature server"

	::=  {  statTCAPEntry  97  }

statTCAPIncorrectParamReRcv	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of incorrect parameters on return errors received on the reporting feature server"

	::=  {  statTCAPEntry  98  }

statTCAPIncorrectParamReXmit	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of incorrect parameters on return errors sent by the reporting feature server"

	::=  {  statTCAPEntry  99  }


statSCCPTable	OBJECT-TYPE
	SYNTAX	SEQUENCE  OF  StatSCCPEntry
	MAX-ACCESS	not-accessible
	STATUS	current
 	DESCRIPTION
		"SCCP protocol related statistics."
	::=  { fsStatistics  2 }

statSCCPEntry	OBJECT-TYPE
	SYNTAX	StatSCCPEntry
	MAX-ACCESS	not-accessible
	STATUS	current
 	DESCRIPTION
		"Row description for SCCP protocol related statistics Table."
	INDEX	{  statSCCPComponentID  }
	::=  { statSCCPTable 1 }

StatSCCPEntry  ::=  SEQUENCE {
	statSCCPComponentID  DisplayString,
	statSCCPDOW  DayOfWeek,
	statSCCPTOD  TimeOfDay,
	statSCCPNoTransAddrFail		Counter32,
	statSCCPNoTransSpecAddrFail		Counter32,
	statSCCPNetworkFail		Counter32,
	statSCCPNetworkCongestFail		Counter32,
	statSCCPSubsysFail		Counter32,
	statSCCPSubsysCongestFail		Counter32,
	statSCCPUnequipUserFail		Counter32,
	statSCCPHopCounterFail		Counter32,
	statSCCPSyntaxErr		Counter32,
	statSCCPUnknownFail		Counter32,
	statSCCPTotalUdataTx		Counter32,
	statSCCPTotalUdataSvcTx		Counter32,
	statSCCPTotalUdataRx		Counter32,
	statSCCPTotalUdataSvcRx		Counter32,
	statSCCPTotalExtUdataTx		Counter32,
	statSCCPTotalExtUdataSvcTx		Counter32,
	statSCCPTotalExtUdataRx		Counter32,
	statSCCPTotalExtUdataSvcRx		Counter32,
	statSCCPTotalLongUdataTx		Counter32,
	statSCCPTotalLongUdataSvcTx		Counter32,
	statSCCPTotalLongUdataRx		Counter32,
	statSCCPTotalLongUdataSvcRx		Counter32,
	statSCCPTotalMsg		Counter32,
	statSCCPTotalLocalMsg		Counter32,
	statSCCPTotalGlobalAddrTran		Counter32,
	statSCCPTotalClass0Tx		Counter32,
	statSCCPTotalClass1Tx		Counter32,
	statSCCPTotalClass0Rx		Counter32,
	statSCCPTotalClass1Rx		Counter32,
	statSCCPSubsysOosReqGrant		Counter32,
	statSCCPSubsysOosReqDeny		Counter32,
	statSCCPMsgTxBackupSubsys		Counter32,
	statSCCPUsapTotalClass0Tx		Counter32,
	statSCCPUsapTotalClass1Tx		Counter32,
	statSCCPUsapTotalClass0Rx		Counter32,
	statSCCPUsapTotalClass1Rx		Counter32,
	statSCCPNsapAllowMsgRx		Counter32,
	statSCCPNsapOosGrantRx		Counter32,
	statSCCPNsapOosReqRx		Counter32,
	statSCCPNsapProhibitRx		Counter32,
	statSCCPNsapStatTestRx		Counter32,
	statSCCPNsapCongestRx		Counter32,
	statSCCPNsapAllowMsgTx		Counter32,
	statSCCPNsapOosGrantTx		Counter32,
	statSCCPNsapOosReqTx		Counter32,
	statSCCPNsapProhibitTx		Counter32,
	statSCCPNsapStatTestTx		Counter32,
	statSCCPNsapCongestTx		Counter32
	}
statSCCPComponentID	OBJECT-TYPE 
	SYNTAX	DisplayString 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"SCCP Component Identifier"
	
	::=  {  statSCCPEntry  1  }

statSCCPDOW	OBJECT-TYPE 
	SYNTAX	DayOfWeek 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"Day of week statistics was collected."
	
	::=  {  statSCCPEntry  2  }

statSCCPTOD	OBJECT-TYPE 
	SYNTAX	TimeOfDay 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"Time of day statistics was collected in XX minutes interval"
	
	::=  {  statSCCPEntry  3  }

statSCCPNoTransAddrFail	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"f routing errors due to no translation for address of such nature on the reporting feature server"

	::=  {  statSCCPEntry  4  }

statSCCPNoTransSpecAddrFail	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of routing errors due to no translation for this specific address on the reporting feature server"

	::=  {  statSCCPEntry  5  }

statSCCPNetworkFail	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of routing errors due to a network failure from the point code being unavailable on the reporting feature server"

	::=  {  statSCCPEntry  6  }

statSCCPNetworkCongestFail	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of routing errors due to network congestion on the reporting feature server"

	::=  {  statSCCPEntry  7  }

statSCCPSubsysFail	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of routing errors due to a subsystem failure on the reporting feature server"

	::=  {  statSCCPEntry  8  }

statSCCPSubsysCongestFail	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of routing errors due to subsystem congestion on the reporting feature server"

	::=  {  statSCCPEntry  9  }

statSCCPUnequipUserFail	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of routing errors due to an unequipped user on the reporting feature server"

	::=  {  statSCCPEntry  10  }

statSCCPHopCounterFail	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of routing errors due to a hop counter violation on the reporting feature server"

	::=  {  statSCCPEntry  11  }

statSCCPSyntaxErr	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of syntax errors on the reporting feature server"

	::=  {  statSCCPEntry  12  }

statSCCPUnknownFail	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of routing errors due to an unknown reason on the reporting feature server"

	::=  {  statSCCPEntry  13  }

statSCCPTotalUdataTx	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of unit data sent on the reporting feature server"

	::=  {  statSCCPEntry  14  }

statSCCPTotalUdataSvcTx	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of unit data service sent on the reporting feature server"

	::=  {  statSCCPEntry  15  }

statSCCPTotalUdataRx	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of unit data received on the reporting feature server"

	::=  {  statSCCPEntry  16  }

statSCCPTotalUdataSvcRx	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of unit data service received on the reporting feature server"

	::=  {  statSCCPEntry  17  }

statSCCPTotalExtUdataTx	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of extended unit data sent on the reporting feature server"

	::=  {  statSCCPEntry  18  }

statSCCPTotalExtUdataSvcTx	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of extended unit data service sent on the reporting feature server"

	::=  {  statSCCPEntry  19  }

statSCCPTotalExtUdataRx	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of extended unit data received on the reporting feature server"

	::=  {  statSCCPEntry  20  }

statSCCPTotalExtUdataSvcRx	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of extended unit data service received on the reporting feature server"

	::=  {  statSCCPEntry  21  }

statSCCPTotalLongUdataTx	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of long unit data sent on the reporting feature server"

	::=  {  statSCCPEntry  22  }

statSCCPTotalLongUdataSvcTx	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of long unit data service sent on the reporting feature server"

	::=  {  statSCCPEntry  23  }

statSCCPTotalLongUdataRx	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of long unit data received on the reporting feature server"

	::=  {  statSCCPEntry  24  }

statSCCPTotalLongUdataSvcRx	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of long unit data service received on the reporting feature server"

	::=  {  statSCCPEntry  25  }

statSCCPTotalMsg	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of messages handled on the reporting feature server"

	::=  {  statSCCPEntry  26  }

statSCCPTotalLocalMsg	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of messages intended for local subsystems on the reporting feature server"

	::=  {  statSCCPEntry  27  }

statSCCPTotalGlobalAddrTran	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of messages requiring global address translation on the reporting feature server"

	::=  {  statSCCPEntry  28  }

statSCCPTotalClass0Tx	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of class 0 messages sent on the reporting feature server"

	::=  {  statSCCPEntry  29  }

statSCCPTotalClass1Tx	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of class 1 messages sent on the reporting feature server"

	::=  {  statSCCPEntry  30  }

statSCCPTotalClass0Rx	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of class 0 messages received on the reporting feature server"

	::=  {  statSCCPEntry  31  }

statSCCPTotalClass1Rx	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of class 1 messages received on the reporting feature server"

	::=  {  statSCCPEntry  32  }

statSCCPSubsysOosReqGrant	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of subsystem out-of-service requests granted on the reporting feature server"

	::=  {  statSCCPEntry  33  }

statSCCPSubsysOosReqDeny	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of subsystem out-of-service requests denied on the reporting feature server"

	::=  {  statSCCPEntry  34  }

statSCCPMsgTxBackupSubsys	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of messages sent to a backup subsystem on the reporting feature server"

	::=  {  statSCCPEntry  35  }

statSCCPUsapTotalClass0Tx	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of class 0 messages sent on the reporting feature server"

	::=  {  statSCCPEntry  36  }

statSCCPUsapTotalClass1Tx	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of class 1 messages sent on the reporting feature server"

	::=  {  statSCCPEntry  37  }

statSCCPUsapTotalClass0Rx	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of class 0 messages received on the reporting feature server"

	::=  {  statSCCPEntry  38  }

statSCCPUsapTotalClass1Rx	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of class 1 messages received on the reporting feature server"

	::=  {  statSCCPEntry  39  }

statSCCPNsapAllowMsgRx	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of subsystem allowed messages received on the reporting feature server"

	::=  {  statSCCPEntry  40  }

statSCCPNsapOosGrantRx	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of subsystem out-of-service grant messages received on the reporting feature server"

	::=  {  statSCCPEntry  41  }

statSCCPNsapOosReqRx	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of subsystem out-of-service request messages received on the reporting feature server"

	::=  {  statSCCPEntry  42  }

statSCCPNsapProhibitRx	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of subsystem prohibited messages received on the reporting feature server"

	::=  {  statSCCPEntry  43  }

statSCCPNsapStatTestRx	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of subsystem status test messages received on the reporting feature server"

	::=  {  statSCCPEntry  44  }

statSCCPNsapCongestRx	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of subsystem congested messages received on the reporting feature server"

	::=  {  statSCCPEntry  45  }

statSCCPNsapAllowMsgTx	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of subsystem allowed messages sent on the reporting feature server"

	::=  {  statSCCPEntry  46  }

statSCCPNsapOosGrantTx	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of subsystem out-of-service grant messages sent on the reporting feature server"

	::=  {  statSCCPEntry  47  }

statSCCPNsapOosReqTx	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of subsystem out-of-service request messages sent on the reporting feature server"

	::=  {  statSCCPEntry  48  }

statSCCPNsapProhibitTx	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of subsystem prohibited messages sent on the reporting feature server"

	::=  {  statSCCPEntry  49  }

statSCCPNsapStatTestTx	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of subsystem status test messages sent on the reporting feature server"

	::=  {  statSCCPEntry  50  }

statSCCPNsapCongestTx	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of subsystem congested messages sent on the reporting feature server"

	::=  {  statSCCPEntry  51  }


statM3UATable	OBJECT-TYPE
	SYNTAX	SEQUENCE  OF  StatM3UAEntry
	MAX-ACCESS	not-accessible
	STATUS	current
 	DESCRIPTION
		"M3UA signaling protocol related statistics."
	::=  { signalingAdapterStatistics  1 }

statM3UAEntry	OBJECT-TYPE
	SYNTAX	StatM3UAEntry
	MAX-ACCESS	not-accessible
	STATUS	current
 	DESCRIPTION
		"Row description for M3UA signaling protocol related statistics Table."
	INDEX	{  statM3UAComponentID, statM3UASgpId  }
	::=  { statM3UATable 1 }

StatM3UAEntry  ::=  SEQUENCE {
	statM3UAComponentID  DisplayString,
	statM3UADOW  DayOfWeek,
	statM3UATOD  TimeOfDay,
	statM3UASgpId		DisplayString,
	statM3UAErrTx		Counter32,
	statM3UAErrRx		Counter32,
	statM3UANotifyTx		Counter32,
	statM3UANotifyRx		Counter32,
	statM3UADunaRx		Counter32,
	statM3UADavaRx		Counter32,
	statM3UADaudTx		Counter32,
	statM3UASconTx		Counter32,
	statM3UASconRx		Counter32,
	statM3UADrstRx		Counter32,
	statM3UADupuRx		Counter32,
	statM3UAUpTx		Counter32,
	statM3UADownTx		Counter32,
	statM3UABeatTx		Counter32,
	statM3UABeatRx		Counter32,
	statM3UAUpAckRx		Counter32,
	statM3UADownAckRx		Counter32,
	statM3UABeatAckTx		Counter32,
	statM3UABeatAckRx		Counter32,
	statM3UAActiveTx		Counter32,
	statM3UAInactiveTx		Counter32,
	statM3UAActiveAckRx		Counter32,
	statM3UAInactiveAckRx		Counter32,
	statM3UADataTransTx		Counter32,
	statM3UADataTransRx		Counter32,
	statM3UADataBytesTx		Counter32,
	statM3UADataBytesRx		Counter32,
	statM3UAInvalidSctpSignals		Counter32,
	statM3UASinceLastResetAssoc		Counter32,
	statM3UAAssocFail		Counter32,
	statM3UASctpTxFail		Counter32,
	statM3UAMsgLengthErr		Counter32,
	statM3UANoMemoryErr		Counter32,
	statM3UAVersionErr		Counter32,
	statM3UAMsgClassErr		Counter32,
	statM3UAMsgTypeErr		Counter32,
	statM3UAStreamIdErr		Counter32,
	statM3UAUnexpectMsgErr		Counter32,
	statM3UAProtocolErr		Counter32,
	statM3UAParamValueErr		Counter32,
	statM3UAParamFieldErr		Counter32,
	statM3UAUnexpectParamErr		Counter32,
	statM3UANetworkAppearErr		Counter32,
	statM3UARoutingContextErr		Counter32,
	statM3UAMsgRxOtherErr		Counter32
	}
statM3UAComponentID	OBJECT-TYPE 
	SYNTAX	DisplayString 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"M3UA Component Identifier"
	
	::=  {  statM3UAEntry  1  }

statM3UADOW	OBJECT-TYPE 
	SYNTAX	DayOfWeek 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"Day of week statistics was collected."
	
	::=  {  statM3UAEntry  2  }

statM3UATOD	OBJECT-TYPE 
	SYNTAX	TimeOfDay 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"Time of day statistics was collected in XX minutes interval"
	
	::=  {  statM3UAEntry  3  }

statM3UASgpId	OBJECT-TYPE
	SYNTAX	DisplayString
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The id of the signaling gateway process that these counters are associated with."

	::=  {  statM3UAEntry  4  }

statM3UAErrTx	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of errors sent on the reporting signaling gateway process"

	::=  {  statM3UAEntry  5  }

statM3UAErrRx	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of errors received on the reporting signaling gateway process"

	::=  {  statM3UAEntry  6  }

statM3UANotifyTx	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of NOTIFYs sent on the reporting signaling gateway process"

	::=  {  statM3UAEntry  7  }

statM3UANotifyRx	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of NOTIFYs received on the reporting signaling gateway process"

	::=  {  statM3UAEntry  8  }

statM3UADunaRx	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of DUNAs received on the reporting signaling gateway process"

	::=  {  statM3UAEntry  9  }

statM3UADavaRx	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of DAVAs received on the reporting signaling gateway process"

	::=  {  statM3UAEntry  10  }

statM3UADaudTx	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of DAUDs transmitted on the reporting signaling gateway process"

	::=  {  statM3UAEntry  11  }

statM3UASconTx	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of SCONs sent on the reporting signaling gateway process"

	::=  {  statM3UAEntry  12  }

statM3UASconRx	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of SCONs received on the reporting signaling gateway process"

	::=  {  statM3UAEntry  13  }

statM3UADrstRx	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of DRSTs received on the reporting signaling gateway process"

	::=  {  statM3UAEntry  14  }

statM3UADupuRx	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of DUPUs received on the reporting signaling gateway process"

	::=  {  statM3UAEntry  15  }

statM3UAUpTx	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of UPs sent on the reporting signaling gateway process"

	::=  {  statM3UAEntry  16  }

statM3UADownTx	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of DOWNs sent on the reporting signaling gateway process"

	::=  {  statM3UAEntry  17  }

statM3UABeatTx	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of BEATs sent on the reporting signaling gateway process"

	::=  {  statM3UAEntry  18  }

statM3UABeatRx	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of BEATs received on the reporting signaling gateway process"

	::=  {  statM3UAEntry  19  }

statM3UAUpAckRx	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of UP Acknowledges received on the reporting signaling gateway process"

	::=  {  statM3UAEntry  20  }

statM3UADownAckRx	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of DOWN Acknowledges received on the reporting signaling gateway process"

	::=  {  statM3UAEntry  21  }

statM3UABeatAckTx	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of BEAT Acknowledges sent on the reporting signaling gateway process"

	::=  {  statM3UAEntry  22  }

statM3UABeatAckRx	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of BEAT Acknowledges received on the reporting signaling gateway process"

	::=  {  statM3UAEntry  23  }

statM3UAActiveTx	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of ACTIVEs sent on the reporting signaling gateway process"

	::=  {  statM3UAEntry  24  }

statM3UAInactiveTx	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of ACTIVEs received on the reporting signaling gateway process"

	::=  {  statM3UAEntry  25  }

statM3UAActiveAckRx	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of ACTIVE Acknowledges received on the reporting signaling gateway process"

	::=  {  statM3UAEntry  26  }

statM3UAInactiveAckRx	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of INACTIVE Acknowledges received on the reporting signaling gateway process"

	::=  {  statM3UAEntry  27  }

statM3UADataTransTx	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of data transfers sent on the reporting signaling gateway process"

	::=  {  statM3UAEntry  28  }

statM3UADataTransRx	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of data transfers received on the reporting signaling gateway process"

	::=  {  statM3UAEntry  29  }

statM3UADataBytesTx	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of data bytes sent on the reporting signaling gateway process"

	::=  {  statM3UAEntry  30  }

statM3UADataBytesRx	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of data bytes received on the reporting signaling gateway process"

	::=  {  statM3UAEntry  31  }

statM3UAInvalidSctpSignals	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of invalid SCTP signals on the reporting signaling gateway process"

	::=  {  statM3UAEntry  32  }

statM3UASinceLastResetAssoc	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of SCTP errors since last reset of association on the reporting signaling gateway process"

	::=  {  statM3UAEntry  33  }

statM3UAAssocFail	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of association failures on the reporting signaling gateway process"

	::=  {  statM3UAEntry  34  }

statM3UASctpTxFail	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of SCTP send failures on message processing errors on the reporting signaling gateway process"

	::=  {  statM3UAEntry  35  }

statM3UAMsgLengthErr	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of messages of invalid length received on the reporting signaling gateway process"

	::=  {  statM3UAEntry  36  }

statM3UANoMemoryErr	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of no memory for message errors on the reporting signaling gateway process"

	::=  {  statM3UAEntry  37  }

statM3UAVersionErr	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of version errors on the reporting signaling gateway process"

	::=  {  statM3UAEntry  38  }

statM3UAMsgClassErr	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of message class errors on the reporting signaling gateway process"

	::=  {  statM3UAEntry  39  }

statM3UAMsgTypeErr	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of message type errors on the reporting signaling gateway process"

	::=  {  statM3UAEntry  40  }

statM3UAStreamIdErr	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of stream id errors on the reporting signaling gateway process"

	::=  {  statM3UAEntry  41  }

statM3UAUnexpectMsgErr	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of unexpected message errors on the reporting signaling gateway process"

	::=  {  statM3UAEntry  42  }

statM3UAProtocolErr	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of protocol errors on the reporting signaling gateway process"

	::=  {  statM3UAEntry  43  }

statM3UAParamValueErr	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of parameter value errors on the reporting signaling gateway process"

	::=  {  statM3UAEntry  44  }

statM3UAParamFieldErr	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of parameter field errors on the reporting signaling gateway process"

	::=  {  statM3UAEntry  45  }

statM3UAUnexpectParamErr	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of unexpected parameter errors on the reporting signaling gateway process"

	::=  {  statM3UAEntry  46  }

statM3UANetworkAppearErr	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of network appearance errors on the reporting signaling gateway process"

	::=  {  statM3UAEntry  47  }

statM3UARoutingContextErr	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of routing context errors on the reporting signaling gateway process"

	::=  {  statM3UAEntry  48  }

statM3UAMsgRxOtherErr	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of messages received with other errors on the reporting call agent or feature server"

	::=  {  statM3UAEntry  49  }


statSUATable	OBJECT-TYPE
	SYNTAX	SEQUENCE  OF  StatSUAEntry
	MAX-ACCESS	not-accessible
	STATUS	current
 	DESCRIPTION
		"SUA signaling protocol related statistics."
	::=  { signalingAdapterStatistics  2 }

statSUAEntry	OBJECT-TYPE
	SYNTAX	StatSUAEntry
	MAX-ACCESS	not-accessible
	STATUS	current
 	DESCRIPTION
		"Row description for SUA signaling protocol related statistics Table."
	INDEX	{  statSUAComponentID, statSUASgpId  }
	::=  { statSUATable 1 }

StatSUAEntry  ::=  SEQUENCE {
	statSUAComponentID  DisplayString,
	statSUADOW  DayOfWeek,
	statSUATOD  TimeOfDay,
	statSUASgpId		DisplayString,
	statSUAErrTx		Counter32,
	statSUAErrRx		Counter32,
	statSUANotifyTx		Counter32,
	statSUANotifyRx		Counter32,
	statSUADunaRx		Counter32,
	statSUADavaRx		Counter32,
	statSUADaudTx		Counter32,
	statSUASconTx		Counter32,
	statSUASconRx		Counter32,
	statSUADrstRx		Counter32,
	statSUADupuRx		Counter32,
	statSUAUpTx		Counter32,
	statSUADownTx		Counter32,
	statSUABeatTx		Counter32,
	statSUABeatRx		Counter32,
	statSUAUpAckRx		Counter32,
	statSUADownAckRx		Counter32,
	statSUABeatAckTx		Counter32,
	statSUABeatAckRx		Counter32,
	statSUAActiveTx		Counter32,
	statSUAInactiveTx		Counter32,
	statSUAActiveAckRx		Counter32,
	statSUAInactiveAckRx		Counter32,
	statSUACldtTx		Counter32,
	statSUACldtRx		Counter32,
	statSUACldrTx		Counter32,
	statSUACldrRx		Counter32,
	statSUADataBytesTx		Counter32,
	statSUADataBytesRx		Counter32,
	statSUAInvalidSctpSignals		Counter32,
	statSUASinceLastResetAssoc		Counter32,
	statSUAAssocFail		Counter32,
	statSUASctpTxFail		Counter32,
	statSUAMsgInvalidLengthRx		Counter32,
	statSUANoMemoryFail		Counter32,
	statSUAVersionErr		Counter32,
	statSUAMsgClassErr		Counter32,
	statSUAMsgTypeErr		Counter32,
	statSUAStreamIdErr		Counter32,
	statSUAUnexpectMsgErr		Counter32,
	statSUAProtocolErr		Counter32,
	statSUAParamValueErr		Counter32,
	statSUAParamFieldErr		Counter32,
	statSUAUnexpectParamErr		Counter32,
	statSUANetworkAppearErr		Counter32,
	statSUARoutingContextErr		Counter32
	}
statSUAComponentID	OBJECT-TYPE 
	SYNTAX	DisplayString 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"SUA Component Identifier"
	
	::=  {  statSUAEntry  1  }

statSUADOW	OBJECT-TYPE 
	SYNTAX	DayOfWeek 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"Day of week statistics was collected."
	
	::=  {  statSUAEntry  2  }

statSUATOD	OBJECT-TYPE 
	SYNTAX	TimeOfDay 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"Time of day statistics was collected in XX minutes interval"
	
	::=  {  statSUAEntry  3  }

statSUASgpId	OBJECT-TYPE
	SYNTAX	DisplayString
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"SGP ID"

	::=  {  statSUAEntry  4  }

statSUAErrTx	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of errors sent on the reporting signaling gateway process"

	::=  {  statSUAEntry  5  }

statSUAErrRx	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of errors received on the reporting signaling gateway process"

	::=  {  statSUAEntry  6  }

statSUANotifyTx	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of NOTIFYs sent on the reporting signaling gateway process"

	::=  {  statSUAEntry  7  }

statSUANotifyRx	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of NOTIFYs received on the reporting signaling gateway process"

	::=  {  statSUAEntry  8  }

statSUADunaRx	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of DUNAs received on the reporting signaling gateway process"

	::=  {  statSUAEntry  9  }

statSUADavaRx	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of DAVAs received on the reporting signaling gateway process"

	::=  {  statSUAEntry  10  }

statSUADaudTx	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of DAUDs sent on the reporting signaling gateway process"

	::=  {  statSUAEntry  11  }

statSUASconTx	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of SCONs sent on the reporting signaling gateway process"

	::=  {  statSUAEntry  12  }

statSUASconRx	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of SCONs received on the reporting signaling gateway process"

	::=  {  statSUAEntry  13  }

statSUADrstRx	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of DRSTs received on the reporting signaling gateway process"

	::=  {  statSUAEntry  14  }

statSUADupuRx	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of DUPUs received on the reporting signaling gateway process"

	::=  {  statSUAEntry  15  }

statSUAUpTx	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of UPs sent on the reporting signaling gateway process"

	::=  {  statSUAEntry  16  }

statSUADownTx	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of DOWNs sent on the reporting signaling gateway process"

	::=  {  statSUAEntry  17  }

statSUABeatTx	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of BEATs sent on the reporting signaling gateway process"

	::=  {  statSUAEntry  18  }

statSUABeatRx	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of BEATs received on the reporting signaling gateway process"

	::=  {  statSUAEntry  19  }

statSUAUpAckRx	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of UP Acknowledges received on the reporting signaling gateway process"

	::=  {  statSUAEntry  20  }

statSUADownAckRx	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of DOWN Acknowledges received on the reporting signaling gateway process"

	::=  {  statSUAEntry  21  }

statSUABeatAckTx	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of BEAT Acknowledges sent on the reporting signaling gateway process"

	::=  {  statSUAEntry  22  }

statSUABeatAckRx	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of BEAT Acknowledges received on the reporting signaling gateway process"

	::=  {  statSUAEntry  23  }

statSUAActiveTx	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of ACTIVEs sent on the reporting signaling gateway process"

	::=  {  statSUAEntry  24  }

statSUAInactiveTx	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of ACTIVEs received on the reporting signaling gateway process"

	::=  {  statSUAEntry  25  }

statSUAActiveAckRx	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of ACTIVE Acknowledges received on the reporting signaling gateway process"

	::=  {  statSUAEntry  26  }

statSUAInactiveAckRx	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of INACTIVE Acknowledges received on the reporting signaling gateway process"

	::=  {  statSUAEntry  27  }

statSUACldtTx	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of CLDTs sent on the reporting signaling gateway process"

	::=  {  statSUAEntry  28  }

statSUACldtRx	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of CLDTs received on the reporting signaling gateway process"

	::=  {  statSUAEntry  29  }

statSUACldrTx	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of CLDRs sent on the reporting signaling gateway process"

	::=  {  statSUAEntry  30  }

statSUACldrRx	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of CLDRs received on the reporting signaling gateway process"

	::=  {  statSUAEntry  31  }

statSUADataBytesTx	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of data bytes sent on the reporting signaling gateway process"

	::=  {  statSUAEntry  32  }

statSUADataBytesRx	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of data bytes received on the reporting signaling gateway process"

	::=  {  statSUAEntry  33  }

statSUAInvalidSctpSignals	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of invalid SCTP signals on the reporting signaling gateway process"

	::=  {  statSUAEntry  34  }

statSUASinceLastResetAssoc	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of SCTP errors since last reset of association on the reporting signaling gateway process"

	::=  {  statSUAEntry  35  }

statSUAAssocFail	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of association failures on the reporting signaling gateway process"

	::=  {  statSUAEntry  36  }

statSUASctpTxFail	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of SCTP send failures on message processing errors on the reporting signaling gateway process"

	::=  {  statSUAEntry  37  }

statSUAMsgInvalidLengthRx	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of messages of invalid length received on the reporting signaling gateway process"

	::=  {  statSUAEntry  38  }

statSUANoMemoryFail	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of no memory for message errors on the reporting signaling gateway process"

	::=  {  statSUAEntry  39  }

statSUAVersionErr	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of version errors on the reporting signaling gateway process"

	::=  {  statSUAEntry  40  }

statSUAMsgClassErr	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of message class errors on the reporting signaling gateway process"

	::=  {  statSUAEntry  41  }

statSUAMsgTypeErr	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of message type errors on the reporting signaling gateway process"

	::=  {  statSUAEntry  42  }

statSUAStreamIdErr	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of stream id errors on the reporting signaling gateway process"

	::=  {  statSUAEntry  43  }

statSUAUnexpectMsgErr	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of unexpected message errors on the reporting signaling gateway process"

	::=  {  statSUAEntry  44  }

statSUAProtocolErr	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of protocol errors on the reporting signaling gateway process"

	::=  {  statSUAEntry  45  }

statSUAParamValueErr	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of parameter value errors on the reporting signaling gateway process"

	::=  {  statSUAEntry  46  }

statSUAParamFieldErr	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of parameter field errors on the reporting signaling gateway process"

	::=  {  statSUAEntry  47  }

statSUAUnexpectParamErr	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of unexpected parameter errors on the reporting signaling gateway process"

	::=  {  statSUAEntry  48  }

statSUANetworkAppearErr	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of network appearance errors on the reporting signaling gateway process"

	::=  {  statSUAEntry  49  }

statSUARoutingContextErr	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of routing context errors on the reporting signaling gateway process"

	::=  {  statSUAEntry  50  }


statSCTPTable	OBJECT-TYPE
	SYNTAX	SEQUENCE  OF  StatSCTPEntry
	MAX-ACCESS	not-accessible
	STATUS	current
 	DESCRIPTION
		"SCTP signaling protocol related statistics."
	::=  { signalingAdapterStatistics  3 }

statSCTPEntry	OBJECT-TYPE
	SYNTAX	StatSCTPEntry
	MAX-ACCESS	not-accessible
	STATUS	current
 	DESCRIPTION
		"Row description for SCTP signaling protocol related statistics Table."
	INDEX	{  statSCTPComponentID, statSCTPSctpAssocId  }
	::=  { statSCTPTable 1 }

StatSCTPEntry  ::=  SEQUENCE {
	statSCTPComponentID  DisplayString,
	statSCTPDOW  DayOfWeek,
	statSCTPTOD  TimeOfDay,
	statSCTPSctpAssocId		DisplayString,
	statSCTPDataChunkRx		Counter32,
	statSCTPDataChunkRxSeqErr		Counter32,
	statSCTPDataChunkRxOrder		Counter32,
	statSCTPDataChunkRxUnorder		Counter32,
	statSCTPDataChunkTx		Counter32,
	statSCTPDataChunkTxOrder		Counter32,
	statSCTPDataChunkTxUnorder		Counter32,
	statSCTPDataChunkDiscard		Counter32,
	statSCTPDataChunkRetran		Counter32,
	statSCTPDataChunkTxBundle		Counter32,
	statSCTPDataChunkRxBundle		Counter32,
	statSCTPDataByteTx		Counter32,
	statSCTPDataByteRx		Counter32,
	statSCTPControlChunkTx		Counter32,
	statSCTPControlChunkRx		Counter32,
	statSCTPUlpTx		Counter32,
	statSCTPUlpReady		Counter32,
	statSCTPUlpRx		Counter32,
	statSCTPUlpQueue		Counter32,
	statSCTPSctpDatagTx		Counter32,
	statSCTPSctpDatagRx		Counter32,
	statSCTPInvalidDatagLength		Counter32,
	statSCTPPartialChunkErr		Counter32,
	statSCTPEmptyDatagErr		Counter32,
	statSCTPInvalidChecksum		Counter32,
	statSCTPInvalidVerifTag		Counter32,
	statSCTPOotb		Counter32,
	statSCTPInvalidStream		Counter32,
	statSCTPAssocCommLost		Counter32,
	statSCTPDestAddrFail		Counter32,
	statSCTPChunkOrderErr		Counter32,
	statSCTPEcneChunkRx		Counter32,
	statSCTPCwrChunkRx		Counter32,
	statSCTPUnknownChunkType		Counter32,
	statSCTPUnknownInitParam		Counter32,
	statSCTPInvalidCookieSig		Counter32,
	statSCTPExpiredCookieErr		Counter32,
	statSCTPStaleCookieErr		Counter32,
	statSCTPPeerRestartErr		Counter32,
	statSCTPUnorderDatagErr		Counter32,
	statSCTPV6AddrParamRx		Counter32,
	statSCTPInvalidStreamErrRx		Counter32,
	statSCTPMissingParamErrRx		Counter32,
	statSCTPStaleCookieErrRx		Counter32,
	statSCTPOutOfRscrErrRx		Counter32,
	statSCTPUnresolvAddrErrRx		Counter32,
	statSCTPUnrecogChunkErrRx		Counter32,
	statSCTPInvalidParamErrRx		Counter32,
	statSCTPUnrecogParamErrRx		Counter32,
	statSCTPNoUserDataErrRx		Counter32,
	statSCTPCookieInShutdownErrRx		Counter32,
	statSCTPChunkTooSmallErr		Counter32,
	statSCTPChuckTooLargeErr		Counter32,
	statSCTPMissingParamErr		Counter32,
	statSCTPNoSpaceIncomErr		Counter32
	}
statSCTPComponentID	OBJECT-TYPE 
	SYNTAX	DisplayString 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"SCTP Component Identifier"
	
	::=  {  statSCTPEntry  1  }

statSCTPDOW	OBJECT-TYPE 
	SYNTAX	DayOfWeek 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"Day of week statistics was collected."
	
	::=  {  statSCTPEntry  2  }

statSCTPTOD	OBJECT-TYPE 
	SYNTAX	TimeOfDay 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"Time of day statistics was collected in XX minutes interval"
	
	::=  {  statSCTPEntry  3  }

statSCTPSctpAssocId	OBJECT-TYPE
	SYNTAX	DisplayString
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The id of the sctp association that the measurement counter block is associated with."

	::=  {  statSCTPEntry  4  }

statSCTPDataChunkRx	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of data chunks received on the reporting sctp association"

	::=  {  statSCTPEntry  5  }

statSCTPDataChunkRxSeqErr	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of out-of-sequence data chunks received on the reporting sctp association"

	::=  {  statSCTPEntry  6  }

statSCTPDataChunkRxOrder	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of ordered data chunks received on the reporting sctp association"

	::=  {  statSCTPEntry  7  }

statSCTPDataChunkRxUnorder	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of unordered data chunks received on the reporting sctp association"

	::=  {  statSCTPEntry  8  }

statSCTPDataChunkTx	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of data chunks sent on the reporting sctp association"

	::=  {  statSCTPEntry  9  }

statSCTPDataChunkTxOrder	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of ordered data chunks sent on the reporting sctp association"

	::=  {  statSCTPEntry  10  }

statSCTPDataChunkTxUnorder	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of unordered data chunks sent on the reporting sctp association"

	::=  {  statSCTPEntry  11  }

statSCTPDataChunkDiscard	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of received duplicate data chunks that were discarded on the reporting sctp association"

	::=  {  statSCTPEntry  12  }

statSCTPDataChunkRetran	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of data chunks that were retransmitted on the reporting sctp association"

	::=  {  statSCTPEntry  13  }

statSCTPDataChunkTxBundle	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of bundled data chunks that were sent on the reporting sctp association"

	::=  {  statSCTPEntry  14  }

statSCTPDataChunkRxBundle	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of bundled data chunks that were received on the reporting sctp association"

	::=  {  statSCTPEntry  15  }

statSCTPDataByteTx	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of data bytes sent over SCTP on the reporting sctp association"

	::=  {  statSCTPEntry  16  }

statSCTPDataByteRx	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of data bytes received over SCTP on the reporting sctp association"

	::=  {  statSCTPEntry  17  }

statSCTPControlChunkTx	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of control chunks sent on the reporting sctp association"

	::=  {  statSCTPEntry  18  }

statSCTPControlChunkRx	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of control chunks received on the reporting sctp association"

	::=  {  statSCTPEntry  19  }

statSCTPUlpTx	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of ULP datagrams sent on the reporting sctp association"

	::=  {  statSCTPEntry  20  }

statSCTPUlpReady	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of received datagrams that are ready to be sent to upper layer processes on the reporting sctp association"

	::=  {  statSCTPEntry  21  }

statSCTPUlpRx	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of received upper layer process datagrams on the reporting sctp association"

	::=  {  statSCTPEntry  22  }

statSCTPUlpQueue	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of upper layer process datagrams queued to be transmitted on the reporting sctp association"

	::=  {  statSCTPEntry  23  }

statSCTPSctpDatagTx	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of datagrams sent on the reporting sctp association"

	::=  {  statSCTPEntry  24  }

statSCTPSctpDatagRx	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of datagrams received on the reporting sctp association"

	::=  {  statSCTPEntry  25  }

statSCTPInvalidDatagLength	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of datagrams received with an invalid length on the reporting sctp association"

	::=  {  statSCTPEntry  26  }

statSCTPPartialChunkErr	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of partial chunks that were received in a datagram on the reporting sctp association"

	::=  {  statSCTPEntry  27  }

statSCTPEmptyDatagErr	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of datagrams received with no data chunks on the reporting sctp association"

	::=  {  statSCTPEntry  28  }

statSCTPInvalidChecksum	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of SCTP datagrams received with an invalid checksum on the reporting sctp association"

	::=  {  statSCTPEntry  29  }

statSCTPInvalidVerifTag	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of datagrams with invalid verification tags received on the reporting sctp association"

	::=  {  statSCTPEntry  31  }

statSCTPOotb	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of out of the blue packets received on the reporting sctp association"

	::=  {  statSCTPEntry  32  }

statSCTPInvalidStream	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of datagrams with invalid stream ids received on the reporting sctp association"

	::=  {  statSCTPEntry  33  }

statSCTPAssocCommLost	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of times the SCTP association communication was lost on the reporting sctp association"

	::=  {  statSCTPEntry  34  }

statSCTPDestAddrFail	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of times a destination address failed on the reporting sctp association"

	::=  {  statSCTPEntry  35  }

statSCTPChunkOrderErr	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of ordered chunks that were in error on the reporting sctp association"

	::=  {  statSCTPEntry  36  }

statSCTPEcneChunkRx	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of ECNE chunks received on the reporting sctp association"

	::=  {  statSCTPEntry  37  }

statSCTPCwrChunkRx	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of CWR chunks received on the reporting sctp association"

	::=  {  statSCTPEntry  38  }

statSCTPUnknownChunkType	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of datagrams with an unknown chunk type received on the reporting sctp association"

	::=  {  statSCTPEntry  39  }

statSCTPUnknownInitParam	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of INIT datagrams with an unknown parameter received on the reporting sctp association"

	::=  {  statSCTPEntry  40  }

statSCTPInvalidCookieSig	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of invalid cookie signals received on the reporting sctp association"

	::=  {  statSCTPEntry  41  }

statSCTPExpiredCookieErr	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of times a cookie echo was received after the cookie timer expired on the reporting sctp association"

	::=  {  statSCTPEntry  42  }

statSCTPStaleCookieErr	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of times other endpoint indicates that the cookie echo was received after the cookie time expired on the reporting sctp association"

	::=  {  statSCTPEntry  43  }

statSCTPPeerRestartErr	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of times the SCTP peer restarted on the reporting sctp association"

	::=  {  statSCTPEntry  44  }

statSCTPUnorderDatagErr	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"Not Used"

	::=  {  statSCTPEntry  47  }

statSCTPV6AddrParamRx	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of packets received with version 6 parameters on the reporting sctp association"

	::=  {  statSCTPEntry  48  }

statSCTPInvalidStreamErrRx	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of times an SCTP peer reported receiving a data chunk on a non-existing stream on the reporting sctp association"

	::=  {  statSCTPEntry  49  }

statSCTPMissingParamErrRx	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of times an INIT or INIT ACK was missing one or more mandatory parameters received on the reporting sctp association"

	::=  {  statSCTPEntry  50  }

statSCTPStaleCookieErrRx	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of times an SCTP peer received a valid cookie that had expired on the reporting sctp association"

	::=  {  statSCTPEntry  51  }

statSCTPOutOfRscrErrRx	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of times an SCTP peer reported it was out of resources on the reporting sctp association"

	::=  {  statSCTPEntry  52  }

statSCTPUnresolvAddrErrRx	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of times an SCTP reported that it received a packet with an address it could not resolve on the reporting sctp association"

	::=  {  statSCTPEntry  53  }

statSCTPUnrecogChunkErrRx	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of times an SCTP peer reported that it received a chunk that is could not understand on the reporting sctp association"

	::=  {  statSCTPEntry  54  }

statSCTPInvalidParamErrRx	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of times an SCTP peer reported that it received an INIT or INIT ACK chunk containing one or more mandatory parameters that were set to an invalid value on the reporting sctp association"

	::=  {  statSCTPEntry  55  }

statSCTPUnrecogParamErrRx	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of times an SCTP peer reported that it received an INIT ACK containing one or more parameters that were unrecognized on the reporting sctp association"

	::=  {  statSCTPEntry  56  }

statSCTPNoUserDataErrRx	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of times an SCTP peer reported that it received a data chunk with no user data in it on the reporting sctp association"

	::=  {  statSCTPEntry  57  }

statSCTPCookieInShutdownErrRx	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of times an SCTP peer reported that is received a COOKIE ECHO while in the SHUTDOWN_ACK_SENT state on the reporting sctp association"

	::=  {  statSCTPEntry  58  }

statSCTPChunkTooSmallErr	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of data chunks received that were too small on the reporting sctp association"

	::=  {  statSCTPEntry  59  }

statSCTPChuckTooLargeErr	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of data chunks received that were too big on the reporting sctp association"

	::=  {  statSCTPEntry  60  }

statSCTPMissingParamErr	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of times that an INIT or INIT ACK chunk was received with one or more mandatory parameters missing on the reporting sctp association"

	::=  {  statSCTPEntry  61  }

statSCTPNoSpaceIncomErr	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of data chunks that were dropped due to no space being available in the local receive window on the reporting sctp association"

	::=  {  statSCTPEntry  62  }


statISUPTable	OBJECT-TYPE
	SYNTAX	SEQUENCE  OF  StatISUPEntry
	MAX-ACCESS	not-accessible
	STATUS	obsolete
 	DESCRIPTION
		"ISUP Statistics."
	::=  { callAgentStatistics  2 }

statISUPEntry	OBJECT-TYPE
	SYNTAX	StatISUPEntry
	MAX-ACCESS	not-accessible
	STATUS	obsolete
 	DESCRIPTION
		"Row description for ISUP Table."
	INDEX	{  statISUPComponentID  }
	::=  { statISUPTable 1 }

StatISUPEntry  ::=  SEQUENCE {
	statISUPComponentID  DisplayString,
	statISUPDOW  DayOfWeek,
	statISUPTOD  TimeOfDay,
	statISUPMsgIAMRcv  Counter32,
	statISUPMsgIAMXmit  Counter32,
	statISUPMsgACMRcv  Counter32,
	statISUPMsgACMXmit  Counter32,
	statISUPMsgANMRcv  Counter32,
	statISUPMsgANMXmit  Counter32,
	statISUPMsgRELRcv  Counter32,
	statISUPMsgRELXmit  Counter32,
	statISUPMsgRLCRcv  Counter32,
	statISUPMsgRLCXmit  Counter32,
	statISUPMsgBLORcv  Counter32,
	statISUPMsgBLOXmit  Counter32,
	statISUPMsgBLARcv  Counter32,
	statISUPMsgBLAXmit  Counter32,
	statISUPMsgCPGRcv  Counter32,
	statISUPMsgCPGXmit  Counter32,
	statISUPMsgCGBRcv  Counter32,
	statISUPMsgCGBXmit  Counter32,
	statISUPMsgUBARcv  Counter32,
	statISUPMsgUBAXmit  Counter32,
	statISUPMsgRSCRcv  Counter32,
	statISUPMsgRSCXmit  Counter32,
	statISUPMsgGRSRcv  Counter32,
	statISUPMsgGRSXmit  Counter32,
	statISUPMsgGRARcv  Counter32,
	statISUPMsgGRAXmit  Counter32,
	statISUPMsgUBLRcv  Counter32,
	statISUPMsgUBLXmit  Counter32,
	statISUPMsgCGBARcv  Counter32,
	statISUPMsgCGBAXmit  Counter32,
	statISUPMsgCGURcv  Counter32,
	statISUPMsgCGUXmit  Counter32,
	statISUPMsgCGUARcv  Counter32,
	statISUPMsgCGUAXmit  Counter32,
	statISUPMsgMSUXmit  Counter32,
	statISUPMsgMSURcv  Counter32,
	statISUPMsgMSUXmitRcv  Counter32,
	statISUPMsgMSU8Xmit  Counter32,
	statISUPMsgMSU8Rcv  Counter32,
	statISUPMsgMSU8XmitRcv  Counter32,
	statISUPMsgMSU8ReXmit  Counter32,
	statISUPMsgCVTRcv  Counter32,
	statISUPMsgCVTXmit  Counter32,
	statISUPMsgCVRRcv  Counter32,
	statISUPMsgCVRXmit  Counter32
	}
statISUPComponentID	OBJECT-TYPE 
	SYNTAX	DisplayString 
	MAX-ACCESS	read-only 
	STATUS	obsolete
 
	
	DESCRIPTION
		"ISUP Identifier"
	
	::=  {  statISUPEntry  1  }

statISUPDOW	OBJECT-TYPE 
	SYNTAX	DayOfWeek 
	MAX-ACCESS	read-only 
	STATUS	obsolete
 
	
	DESCRIPTION
		"Day of week statistics was collected."
	
	::=  {  statISUPEntry  2  }

statISUPTOD	OBJECT-TYPE 
	SYNTAX	TimeOfDay 
	MAX-ACCESS	read-only 
	STATUS	obsolete
 
	
	DESCRIPTION
		"Time of day statistics was collected in XX minutes interval"
	
	::=  {  statISUPEntry  3  }

statISUPMsgIAMRcv	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	obsolete
 
	
	DESCRIPTION
		"The total number of ISUP IAMs received via the SS7 link(s) 
		by the reporting call agent"
	
	::=  {  statISUPEntry  4  }

statISUPMsgIAMXmit	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	obsolete
 
	
	DESCRIPTION
		"The total number of ISUP IAMs transmitted via the SS7 link(s) 
		by the reporting call agent"
	
	::=  {  statISUPEntry  5  }

statISUPMsgACMRcv	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	obsolete
 
	
	DESCRIPTION
		"The total number of ISUP ACMs received via the SS7 link(s) 
		by the reporting call agent"
	
	::=  {  statISUPEntry  6  }

statISUPMsgACMXmit	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	obsolete
 
	
	DESCRIPTION
		"The total number of ISUP ACMs transmitted via the SS7 link(s) 
		by the reporting call agent"
	
	::=  {  statISUPEntry  7  }

statISUPMsgANMRcv	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	obsolete
 
	
	DESCRIPTION
		"The total number of ISUP ANMs received via the SS7 link(s) 
		by the reporting call agent"
	
	::=  {  statISUPEntry  8  }

statISUPMsgANMXmit	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	obsolete
 
	
	DESCRIPTION
		"The total number of ISUP ANMs transmitted via the SS7 link(s) 
		by the reporting call agent"
	
	::=  {  statISUPEntry  9  }

statISUPMsgRELRcv	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	obsolete
 
	
	DESCRIPTION
		"The total number of ISUP RELs received via the SS7 link(s) 
		by the reporting call agent"
	
	::=  {  statISUPEntry  10  }

statISUPMsgRELXmit	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	obsolete
 
	
	DESCRIPTION
		"The total number of ISUP RELs transmitted via the SS7 link(s) 
		by the reporting call agent"
	
	::=  {  statISUPEntry  11  }

statISUPMsgRLCRcv	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	obsolete
 
	
	DESCRIPTION
		"The total number of ISUP RLCs received via the SS7 link(s) 
		by the reporting call agent"
	
	::=  {  statISUPEntry  12  }

statISUPMsgRLCXmit	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	obsolete
 
	
	DESCRIPTION
		"The total number of ISUP RLCs transmitted via the SS7 link(s) 
		by the reporting call agent"
	
	::=  {  statISUPEntry  13  }

statISUPMsgBLORcv	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	obsolete
 
	
	DESCRIPTION
		"The total number of ISUP BLOs received via the SS7 link(s) 
		by the reporting call agent"
	
	::=  {  statISUPEntry  14  }

statISUPMsgBLOXmit	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	obsolete
 
	
	DESCRIPTION
		"The total number of ISUP BLOs transmitted via the SS7 link(s) 
		by the reporting call agent"
	
	::=  {  statISUPEntry  15  }

statISUPMsgBLARcv	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	obsolete
 
	
	DESCRIPTION
		"The total number of ISUP BLAs received via the SS7 link(s) 
		by the reporting call agent"
	
	::=  {  statISUPEntry  16  }

statISUPMsgBLAXmit	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	obsolete
 
	
	DESCRIPTION
		"The total number of ISUP BLAs transmitted via the SS7 link(s) 
		by the reporting call agent"
	
	::=  {  statISUPEntry  17  }


statISUPMsgCPGRcv	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	obsolete
 
	
	DESCRIPTION
		"The total number of ISUP CPGs received via the SS7 link(s) 
		by the reporting call agent"
	
	::=  {  statISUPEntry  18  }

statISUPMsgCPGXmit	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	obsolete
 
	
	DESCRIPTION
		"The total number of ISUP CPGs transmitted via the SS7 link(s) 
		by the reporting call agent"
	
	::=  {  statISUPEntry  19  }

statISUPMsgCGBRcv	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	obsolete
 
	
	DESCRIPTION
		"The total number of ISUP CGBs received via the SS7 link(s) 
		by the reporting call agent"
	
	::=  {  statISUPEntry  20  }

statISUPMsgCGBXmit	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	obsolete
 
	
	DESCRIPTION
		"The total number of ISUP CGBs transmitted via the SS7 link(s) 
		by the reporting call agent"
	
	::=  {  statISUPEntry  21  }

statISUPMsgUBARcv	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	obsolete
 
	
	DESCRIPTION
		"The total number of ISUP UBAs received via the SS7 link(s) 
		by the reporting call agent"
	
	::=  {  statISUPEntry  22  }

statISUPMsgUBAXmit	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	obsolete
 
	
	DESCRIPTION
		"The total number of ISUP UBAs transmitted via the SS7 link(s) 
		by the reporting call agent"
	
	::=  {  statISUPEntry  23  }

statISUPMsgRSCRcv	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	obsolete
 
	
	DESCRIPTION
		"The total number of ISUP RSCs received via the SS7 link(s) 
		by the reporting call agent"
	
	::=  {  statISUPEntry  24  }

statISUPMsgRSCXmit	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	obsolete
 
	
	DESCRIPTION
		"The total number of ISUP RSCs transmitted via the SS7 link(s) 
		by the reporting call agent"
	
	::=  {  statISUPEntry  25  }

statISUPMsgGRSRcv	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	obsolete
 
	
	DESCRIPTION
		"The total number of ISUP GRSs received via the SS7 link(s) 
		by the reporting call agent"
	
	::=  {  statISUPEntry  26  }

statISUPMsgGRSXmit	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	obsolete
 
	
	DESCRIPTION
		"The total number of ISUP GRSs transmitted via the SS7 link(s) 
		by the reporting call agent"
	
	::=  {  statISUPEntry  27  }

statISUPMsgGRARcv	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	obsolete
 
	
	DESCRIPTION
		"The total number of ISUP GRAs received via the SS7 link(s) 
		by the reporting call agent"
	
	::=  {  statISUPEntry  28  }

statISUPMsgGRAXmit	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	obsolete
 
	
	DESCRIPTION
		"The total number of ISUP GRAs transmitted via the SS7 link(s) 
		by the reporting call agent"
	
	::=  {  statISUPEntry  29  }

statISUPMsgUBLRcv	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	obsolete
 
	
	DESCRIPTION
		"The total number of ISUP UBLs received via the SS7 link(s) 
		by the reporting call agent"
	
	::=  {  statISUPEntry  30  }

statISUPMsgUBLXmit	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	obsolete
 
	
	DESCRIPTION
		"The total number of ISUP UBLs transmitted via the SS7 link(s) 
		by the reporting call agent"
	
	::=  {  statISUPEntry  31  }

statISUPMsgCGBARcv	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	obsolete
 
	
	DESCRIPTION
		"The total number of ISUP CGBAs received via the SS7 link(s) 
		by the reporting call agent"
	
	::=  {  statISUPEntry  32  }

statISUPMsgCGBAXmit	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	obsolete
 
	
	DESCRIPTION
		"The total number of ISUP CGBAs transmitted via the SS7 
		link(s) by the reporting call agent"
	
	::=  {  statISUPEntry  33  }

statISUPMsgCGURcv	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	obsolete
 
	
	DESCRIPTION
		"The total number of ISUP CGUs received via the SS7 link(s) 
		by the reporting call agent"
	
	::=  {  statISUPEntry  34  }

statISUPMsgCGUXmit	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	obsolete
 
	
	DESCRIPTION
		"The total number of ISUP CGUs transmitted via the SS7 link(s) 
		by the reporting call agent"
	
	::=  {  statISUPEntry  35  }

statISUPMsgCGUARcv	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	obsolete
 
	
	DESCRIPTION
		"The total number of ISUP CGUAs received via the SS7 link(s) 
		by the reporting call agent"
	
	::=  {  statISUPEntry  36  }

statISUPMsgCGUAXmit	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	obsolete
 
	
	DESCRIPTION
		"The total number of ISUP CGUAs transmitted via the SS7 link(s) 
		by the reporting call agent"
	
	::=  {  statISUPEntry  37  }

statISUPMsgMSUXmit	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	obsolete
 
	
	DESCRIPTION
		"The total number of message signal units transmitted via the 
		SS7 link(s) by the reporting call agent"
	
	::=  {  statISUPEntry  38  }

statISUPMsgMSURcv	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	obsolete
 
	
	DESCRIPTION
		"The total number of message signal units received via the 
		SS7 link(s) by the reporting call agent"
	
	::=  {  statISUPEntry  39  }


statISUPMsgMSUXmitRcv	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	obsolete
 
	
	DESCRIPTION
		"The total number of message signal units transmitted and 
		received via the SS7 link(s) by the reporting call agent"
	
	::=  {  statISUPEntry  40  }

statISUPMsgMSU8Xmit	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	obsolete
 
	
	DESCRIPTION
		"The total number of message signal unit octets transmitted 
		via the SS7 link(s) by the reporting call agent"
	
	::=  {  statISUPEntry  41  }

statISUPMsgMSU8Rcv	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	obsolete
 
	
	DESCRIPTION
		"The total number of message signal unit octets received 
		via the SS7 link(s) by the reporting call agent"
	
	::=  {  statISUPEntry  42  }

statISUPMsgMSU8XmitRcv	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	obsolete
 
	
	DESCRIPTION
		"The total number of message signal unit octets transmitted 
		and received via the SS7 link(s) by the reporting call agent"
	
	::=  {  statISUPEntry  43  }

statISUPMsgMSU8ReXmit	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	obsolete
 
	
	DESCRIPTION
		"The total number of message signal unit octets retransmitted 
		via the SS7 link(s) by the reporting call agent"
	
	::=  {  statISUPEntry  44  }

statISUPMsgCVTRcv	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	obsolete
 
	
	DESCRIPTION
		"The total number of ISUP CVTs received via the SS7 link(s) by 
		the reporting call agent"
	
	::=  {  statISUPEntry  45  }

statISUPMsgCVTXmit	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	obsolete
 
	
	DESCRIPTION
		"The total number of ISUP CVTs transmitted via the 
		SS7 link(s) by the reporting call agent"
	
	::=  {  statISUPEntry  46  }

statISUPMsgCVRRcv	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	obsolete
 
	
	DESCRIPTION
		"The total number of ISUP CVRs received via the SS7 link(s) by 
		the reporting call agent"
	
	::=  {  statISUPEntry  47  }

statISUPMsgCVRXmit	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	obsolete
 
	
	DESCRIPTION
		"The total number of ISUP CVRs transmitted via the 
		SS7 link(s) by the reporting call agent"
	
	::=  {  statISUPEntry  48  }

statCallProcessingTable	OBJECT-TYPE
	SYNTAX	SEQUENCE  OF  StatCallProcessingEntry
	MAX-ACCESS	not-accessible
	STATUS	current
 	DESCRIPTION
		"Call Processing for Call Agent Statistics."
	::=  { callAgentStatistics  3 }

statCallProcessingEntry	OBJECT-TYPE
	SYNTAX	StatCallProcessingEntry
	MAX-ACCESS	not-accessible
	STATUS	current
 	DESCRIPTION
		"Row description for Call Processing Statistics Table."
	INDEX	{  statCallProcComponentID  }
	::=  { statCallProcessingTable 1 }

StatCallProcessingEntry  ::=  SEQUENCE {
	statCallProcComponentID  DisplayString,
	statCallProcDOW  DayOfWeek,
	statCallProcTOD  TimeOfDay,
	statCallProcOrigAttemptTot  Counter32,
	statCallProcTermAttemptTot  Counter32,
	statCallProcOrigFailTot  Counter32,
	statCallProcTermFailTot  Counter32,
	statCallProcSuccCallsTot  Counter32,
	statCallProcAbandonedCallsTot  Counter32,
	statCallProcISDNOrigAttemptTot  Counter32,
	statCallProcISDNTermAttemptTot  Counter32,
	statCallProcISDNOrigFailTot  Counter32,
	statCallProcISDNTermFailTot  Counter32,
	statCallProcISDNSuccCallsTot  Counter32,
	statCallProcISDNAbandonedCallsTot  Counter32,
	statCallProcSS7OrigAttemptTot  Counter32,
	statCallProcSS7TermAttemptTot  Counter32,
	statCallProcSS7OrigFailTot  Counter32,
	statCallProcSS7TermFailTot  Counter32,
	statCallProcSS7SuccCallsTot  Counter32,
	statCallProcSS7AbandonedCallsTot  Counter32,
	statCallProcSIPOrigAttemptTot  Counter32,
	statCallProcSIPTermAttemptTot  Counter32,
	statCallProcSIPOrigFailTot  Counter32,
	statCallProcSIPTermFailTot  Counter32,
	statCallProcSIPSuccCallsTot  Counter32,
	statCallProcSIPAbandonedCallsTot  Counter32,
	statCallProcMGCPOrigAttemptTot  Counter32,
	statCallProcMGCPTermAttemptTot  Counter32,
	statCallProcMGCPOrigFailTot  Counter32,
	statCallProcMGCPTermFailTot  Counter32,
	statCallProcMGCPSuccCallsTot  Counter32,
	statCallProcMGCPAbandonedCallsTot  Counter32,
	statCallProcCASOrigAttemptTot  Counter32,
	statCallProcCASTermAttemptTot  Counter32,
	statCallProcCASOrigFailTot  Counter32,
	statCallProcCASTermFailTot  Counter32,
	statCallProcCASSuccCallsTot  Counter32,
	statCallProcCASAbandonedCallsTot  Counter32,
	statCallProcSuccISDNToSS7Tot  Counter32,
	statCallProcSuccISDNToISDNTot  Counter32,
	statCallProcSuccISDNToSIPTot  Counter32,
	statCallProcSuccISDNToMGCPTot  Counter32,
	statCallProcSuccISDNToCASTot  Counter32,
	statCallProcSuccSS7ToISDNTot  Counter32,
	statCallProcSuccSS7ToSS7Tot  Counter32,
	statCallProcSuccSS7ToSIPTot  Counter32,
	statCallProcSuccSS7ToMGCPTot  Counter32,
	statCallProcSuccSS7ToCASTot  Counter32,
	statCallProcSuccSIPToSS7Tot  Counter32,
	statCallProcSuccSIPToISDNTot  Counter32,
	statCallProcSuccSIPToSIPTot  Counter32,
	statCallProcSuccSIPToMGCPTot  Counter32,
	statCallProcSuccSIPToCASTot  Counter32,
	statCallProcSuccMGCPToSIPTot  Counter32,
	statCallProcSuccMGCPToISDNTot  Counter32,
	statCallProcSuccMGCPToSS7Tot  Counter32,
	statCallProcSuccMGCPToMGCPTot  Counter32,
	statCallProcSuccMGCPToCASTot  Counter32,
	statCallProcSuccCASToSIPTot  Counter32,
	statCallProcSuccCASToISDNTot  Counter32,
	statCallProcSuccCASToSS7Tot  Counter32,
	statCallProcSuccCASToMGCPTot  Counter32,
	statCallProcSuccCASToCASTot  Counter32,
	statCallProcInterlataAttemptTot  Counter32,
	statCallProcInterlataSuccTot  Counter32,
	statCallProcInterlataFailTot  Counter32,
	statCallProcInterlataAbandonTot  Counter32,
	statCallProcIntralataAttemptTot  Counter32,
	statCallProcIntralataSuccTot  Counter32,
	statCallProcIntralataFailTot  Counter32,
	statCallProcIntralataAbandonTot  Counter32,
	statCallProcIntlAttemptTot  Counter32,
	statCallProcIntlSuccTot  Counter32,
	statCallProcIntlFailTot  Counter32,
	statCallProcIntlAbandonTot  Counter32,
	statCallProcEmergencyAttemptTot  Counter32,
	statCallProcEmergencySuccTot  Counter32,
	statCallProcEmergencyFailTot  Counter32,
	statCallProcEmergencyAbandonTot  Counter32,
	statCallProcLocalAttemptTot  Counter32,
	statCallProcLocalSuccTot  Counter32,
	statCallProcLocalFailTot  Counter32,
	statCallProcLocalAbandonTot  Counter32,
	statCallProcTollfreeAttemptTot  Counter32,
	statCallProcTollfreeSuccTot  Counter32,
	statCallProcTollfreeFailTot  Counter32,
	statCallProcTollfreeAbandonTot  Counter32,
	statCallProcH323OrigAttempt  Counter32,
	statCallProcH323TermAttempt  Counter32,
	statCallProcH323OrigFail  Counter32,
	statCallProcH323TermFail  Counter32,
	statCallProcH323CallSucc  Counter32,
	statCallProcH323CallAbandon  Counter32,
	statCallProcISDNH323Call  Counter32,
	statCallProcSS7H323Call  Counter32,
	statCallProcSIPH323Call  Counter32,
	statCallProcMGCPH323Call  Counter32,
	statCallProcCASH323Call  Counter32,
	statCallProcH323SIPCall  Counter32,
	statCallProcH323ISDNCall  Counter32,
	statCallProcH323SS7Call  Counter32,
	statCallProcH323MGCPCall  Counter32,
	statCallProcH323CASCall  Counter32,
	statCallProcH323H323Call  Counter32,
	statCallProcNASAuthSucc  Counter32,
	statCallProcNASAuthFail  Counter32,
	statCallProcNASOpFail  Counter32,
	statCallProcNASISPPortLimit  Counter32,
	statCallProcNASNoModems  Counter32,
	statCallProcNASCLGUnacc  Counter32,
	statCallProcNASCLDUnacc  Counter32,
	statCallProcNASUserRequest  Counter32,
	statCallProcNASLostCarrier  Counter32,
	statCallProcNASLostService  Counter32,
	statCallProcNASIdleService  Counter32,
	statCallProcNASSessionTimeout  Counter32,
	statCallProcNASAdminReset  Counter32,
	statCallProcNASAdminReboot  Counter32,
	statCallProcNASPortError  Counter32,
	statCallProcNASNASError  Counter32,
	statCallProcNASNASRequest  Counter32,
	statCallProcNASNASReboot  Counter32,
	statCallProcNASPortUnneeded  Counter32,
	statCallProcNASPortPreempted  Counter32,
	statCallProcNASPortSuspended  Counter32,
	statCallProcNASServiceUnavail  Counter32,
	statCallProcNASCallback  Counter32,
	statCallProcNASUserError  Counter32,
	statCallProcNASHostRequest  Counter32
	}
statCallProcComponentID	OBJECT-TYPE 
	SYNTAX	DisplayString 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"Call Processing Call Agent Identifier"
	
	::=  {  statCallProcessingEntry  1  }

statCallProcDOW	OBJECT-TYPE 
	SYNTAX	DayOfWeek 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"Day of week statistics was collected."
	
	::=  {  statCallProcessingEntry  3  }

statCallProcTOD	OBJECT-TYPE 
	SYNTAX	TimeOfDay 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"Time of day statistics was collected in XX minutes interval"
	
	::=  {  statCallProcessingEntry  4  }

statCallProcOrigAttemptTot	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of originating call attempts of all types on the 
		reporting call agent"
	
	::=  {  statCallProcessingEntry  5  }

statCallProcTermAttemptTot	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of terminating call attempts of all types on 
		the reporting call agent"
	
	::=  {  statCallProcessingEntry  6  }

statCallProcOrigFailTot	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of originating call attempts of all types that 
		failed on the reporting call agent"
	
	::=  {  statCallProcessingEntry  7  }

statCallProcTermFailTot	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of terminating call attempts of all types that 
		failed on the reporting call agent"
	
	::=  {  statCallProcessingEntry  8  }

statCallProcSuccCallsTot	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of successful originating and terminating call 
		attempts of all types on the reporting call agent"
	
	::=  {  statCallProcessingEntry  9  }

statCallProcAbandonedCallsTot	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of originating call attempts of all types that 
		were abandoned on the reporting call agent"
	
	::=  {  statCallProcessingEntry  10  }

statCallProcISDNOrigAttemptTot	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of originating ISDN call attempts on the 
		reporting call agent"
	
	::=  {  statCallProcessingEntry  11  }

statCallProcISDNTermAttemptTot	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of ISDN terminating call attempts on the 
		reporting call agent"
	
	::=  {  statCallProcessingEntry  12  }

statCallProcISDNOrigFailTot	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of ISDN originating call attempts that failed on 
		the reporting call agent"
	
	::=  {  statCallProcessingEntry  13  }

statCallProcISDNTermFailTot	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of ISDN terminating call attempts that failed on 
		the reporting call agent"
	
	::=  {  statCallProcessingEntry  14  }

statCallProcISDNSuccCallsTot	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of successful ISDN originating and terminating 
		call attempts on the reporting call agent"
	
	::=  {  statCallProcessingEntry  15  }

statCallProcISDNAbandonedCallsTot	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of ISDN originating call attempts that were 
		abandoned on the reporting call agent"
	
	::=  {  statCallProcessingEntry  16  }

statCallProcSS7OrigAttemptTot	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of originating SS7 call attempts on the reporting 
		call agent"
	
	::=  {  statCallProcessingEntry  17  }

statCallProcSS7TermAttemptTot	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of SS7 terminating call attempts on the reporting 
		call agent"
	
	::=  {  statCallProcessingEntry  18  }

statCallProcSS7OrigFailTot	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of SS7 originating call attempts that failed on 
		the reporting call agent"
	
	::=  {  statCallProcessingEntry  19  }

statCallProcSS7TermFailTot	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of SS7 terminating call attempts that failed on 
		the reporting call agent"
	
	::=  {  statCallProcessingEntry  20  }

statCallProcSS7SuccCallsTot	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of successful SS7 originating and terminating 
		call attempts on the reporting call agent"
	
	::=  {  statCallProcessingEntry  21  }

statCallProcSS7AbandonedCallsTot	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of SS7 originating call attempts that were 
		abandoned on the reporting call agent"
	
	::=  {  statCallProcessingEntry  22  }

statCallProcSIPOrigAttemptTot	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of originating SIP call attempts on the reporting 
		call agent"
	
	::=  {  statCallProcessingEntry  23  }

statCallProcSIPTermAttemptTot	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of SIP terminating call attempts on the reporting 
		call agent"
	
	::=  {  statCallProcessingEntry  24  }

statCallProcSIPOrigFailTot	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of SIP originating call attempts that failed on 
		the reporting call agent"
	
	::=  {  statCallProcessingEntry  25  }

statCallProcSIPTermFailTot	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of SIP terminating call attempts that failed on 
		the reporting call agent"
	
	::=  {  statCallProcessingEntry  26  }

statCallProcSIPSuccCallsTot	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of successful SIP originating and terminating 
		call attempts on the reporting call agent"
	
	::=  {  statCallProcessingEntry  27  }

statCallProcSIPAbandonedCallsTot	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of SIP originating call attempts that were 
		abandoned on the reporting call agent"
	
	::=  {  statCallProcessingEntry  28  }

statCallProcMGCPOrigAttemptTot	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of originating MGCP call attempts on the reporting 
		call agent"
	
	::=  {  statCallProcessingEntry  29  }

statCallProcMGCPTermAttemptTot	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of MGCP terminating call attempts on the reporting 
		call agent"
	
	::=  {  statCallProcessingEntry  30  }

statCallProcMGCPOrigFailTot	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of MGCP originating call attempts that failed on 
		the reporting call agent"
	
	::=  {  statCallProcessingEntry  31  }

statCallProcMGCPTermFailTot	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of MGCP terminating call attempts that failed on 
		the reporting call agent"
	
	::=  {  statCallProcessingEntry  32  }

statCallProcMGCPSuccCallsTot	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of successful MGCP originating and terminating 
		call attempts on the reporting call agent"
	
	::=  {  statCallProcessingEntry  33  }

statCallProcMGCPAbandonedCallsTot	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of MGCP originating call attempts that were 
		abandoned on the reporting call agent"
	
	::=  {  statCallProcessingEntry  34  }

statCallProcCASOrigAttemptTot	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of originating CAS call attempts on the reporting 
		call agent"
	
	::=  {  statCallProcessingEntry  35  }

statCallProcCASTermAttemptTot	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of CAS terminating call attempts on the reporting 
		call agent"
	
	::=  {  statCallProcessingEntry  36  }

statCallProcCASOrigFailTot	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of CAS originating call attempts that failed on 
		the reporting call agent"
	
	::=  {  statCallProcessingEntry  37  }

statCallProcCASTermFailTot	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of CAS terminating call attempts that failed on 
		the reporting call agent"
	
	::=  {  statCallProcessingEntry  38  }

statCallProcCASSuccCallsTot	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of successful CAS originating and terminating 
		call attempts on the reporting call agent"
	
	::=  {  statCallProcessingEntry  39  }

statCallProcCASAbandonedCallsTot	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of CAS originating call attempts that were 
		abandoned on the reporting call agent"
	
	::=  {  statCallProcessingEntry  40  }

statCallProcSuccISDNToSS7Tot	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of successfully completed calls from an ISDN 
		originator to an SS7 terminator on the reporting call agent"
	
	::=  {  statCallProcessingEntry  41  }

statCallProcSuccISDNToISDNTot	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of successfully completed calls from an ISDN 
		originator to an ISDN terminator on the reporting call agent"
	
	::=  {  statCallProcessingEntry  42  }

statCallProcSuccISDNToSIPTot	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of successfully completed calls from an ISDN 
		originator to an SIP terminator on the reporting call agent"
	
	::=  {  statCallProcessingEntry  43  }

statCallProcSuccISDNToMGCPTot	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of successfully completed calls from an ISDN 
		originator to an MGCP terminator on the reporting call agent"
	
	::=  {  statCallProcessingEntry  44  }

statCallProcSuccISDNToCASTot	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of successfully completed calls from an ISDN 
		originator to an CAS terminator on the reporting call agent"
	
	::=  {  statCallProcessingEntry  45  }

statCallProcSuccSS7ToISDNTot	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of successfully completed calls from an SS7 
		originator to an SS7 terminator on the reporting call agent"
	
	::=  {  statCallProcessingEntry  46  }

statCallProcSuccSS7ToSS7Tot	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of successfully completed calls from an SS7 
		originator to an ISDN terminator on the reporting call agent"
	
	::=  {  statCallProcessingEntry  47  }

statCallProcSuccSS7ToSIPTot	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of successfully completed calls from an SS7 
		originator to an SIP terminator on the reporting call agent"
	
	::=  {  statCallProcessingEntry  48  }

statCallProcSuccSS7ToMGCPTot	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of successfully completed calls from an SS7 
		originator to an MGCP terminator on the reporting call agent"
	
	::=  {  statCallProcessingEntry  49  }

statCallProcSuccSS7ToCASTot	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of successfully completed calls from an SS7 
		originator to an CAS terminator on the reporting call agent"
	
	::=  {  statCallProcessingEntry  50  }

statCallProcSuccSIPToSS7Tot	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of successfully completed calls from a SIP 
		originator to an SS7 terminator on the reporting call agent"
	
	::=  {  statCallProcessingEntry  51  }

statCallProcSuccSIPToISDNTot	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of successfully completed calls from a SIP 
		originator to an ISDN terminator on the reporting call agent"
	
	::=  {  statCallProcessingEntry  52  }

statCallProcSuccSIPToSIPTot	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of successfully completed calls from a SIP 
		originator to an SIP terminator on the reporting call agent"
	
	::=  {  statCallProcessingEntry  53  }

statCallProcSuccSIPToMGCPTot	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of successfully completed calls from a SIP 
		originator to an MGCP terminator on the reporting call agent"
	
	::=  {  statCallProcessingEntry  54  }

statCallProcSuccSIPToCASTot	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of successfully completed calls from a SIP 
		originator to an CAS terminator on the reporting call agent"
	
	::=  {  statCallProcessingEntry  55  }

statCallProcSuccMGCPToSIPTot	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of successfully completed calls from an MGCP 
		originator to an SS7 terminator on the reporting call agent"
	
	::=  {  statCallProcessingEntry  56  }

statCallProcSuccMGCPToISDNTot	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of successfully completed calls from an MGCP 
		originator to an ISDN terminator on the reporting call agent"
	
	::=  {  statCallProcessingEntry  57  }

statCallProcSuccMGCPToSS7Tot	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of successfully completed calls from an MGCP 
		originator to an SIP terminator on the reporting call agent"
	
	::=  {  statCallProcessingEntry  58  }

statCallProcSuccMGCPToMGCPTot	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of successfully completed calls from an MGCP 
		originator to an MGCP terminator on the reporting call agent"
	
	::=  {  statCallProcessingEntry  59  }

statCallProcSuccMGCPToCASTot	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of successfully completed calls from an MGCP 
		originator to an CAS terminator on the reporting call agent"
	
	::=  {  statCallProcessingEntry  60  }

statCallProcSuccCASToSIPTot	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of successfully completed calls from an CAS 
		originator to an SIP terminator on the reporting call agent"
	
	::=  {  statCallProcessingEntry  61  }

statCallProcSuccCASToISDNTot	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of successfully completed calls from an CAS 
		originator to an ISDN terminator on the reporting call agent"
	
	::=  {  statCallProcessingEntry  62  }

statCallProcSuccCASToSS7Tot	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of successfully completed calls from an CAS 
		originator to an SS7 terminator on the reporting call agent"
	
	::=  {  statCallProcessingEntry  63  }

statCallProcSuccCASToMGCPTot	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of successfully completed calls from an CAS 
		originator to an MGCP terminator on the reporting call agent"
	
	::=  {  statCallProcessingEntry  64  }

statCallProcSuccCASToCASTot	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of successfully completed calls from an CAS 
		originator to an CAS terminator on the reporting call agent"
	
	::=  {  statCallProcessingEntry  65  }

statCallProcInterlataAttemptTot	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of Interlata call attempts on the reporting 
		call agent"
	
	::=  {  statCallProcessingEntry  66  }

statCallProcInterlataSuccTot	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of Interlata call attempts that completed 
		successfully on the reporting call agent"
	
	::=  {  statCallProcessingEntry  67  }

statCallProcInterlataFailTot	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of Interlata call attempts that failed on the 
		reporting call agent"
	
	::=  {  statCallProcessingEntry  68  }

statCallProcInterlataAbandonTot	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of Interlata call origination attempts that were 
		abandoned on the reporting call agent"
	
	::=  {  statCallProcessingEntry  69  }

statCallProcIntralataAttemptTot	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of Intralata call attempts on the reporting 
		call agent"
	
	::=  {  statCallProcessingEntry  70  }

statCallProcIntralataSuccTot	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of Intralata call attempts that completed 
		successfully on the reporting call agent"
	
	::=  {  statCallProcessingEntry  71  }

statCallProcIntralataFailTot	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of Intralata call attempts that failed on the 
		reporting call agent"
	
	::=  {  statCallProcessingEntry  72  }

statCallProcIntralataAbandonTot	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of Intralata call origination attempts that were 
		abandoned on the reporting call agent"
	
	::=  {  statCallProcessingEntry  73  }

statCallProcIntlAttemptTot	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of International call attempts on the reporting 
		call agent"
	
	::=  {  statCallProcessingEntry  74  }

statCallProcIntlSuccTot	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of International call attempts that completed 
		successfully on the reporting call agent"
	
	::=  {  statCallProcessingEntry  75  }

statCallProcIntlFailTot	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of International call attempts that failed on the 
		reporting call agent"
	
	::=  {  statCallProcessingEntry  76  }

statCallProcIntlAbandonTot	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of International call origination attempts that 
		were abandoned on the reporting call agent"
	
	::=  {  statCallProcessingEntry  77  }

statCallProcEmergencyAttemptTot	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of Emergency call attempts on the reporting 
		call agent"
	
	::=  {  statCallProcessingEntry  78  }

statCallProcEmergencySuccTot	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of Emergency call attempts that completed 
		successfully on the reporting call agent"
	
	::=  {  statCallProcessingEntry  79  }

statCallProcEmergencyFailTot	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of Emergency call attempts that failed on the 
		reporting call agent"
	
	::=  {  statCallProcessingEntry  80  }

statCallProcEmergencyAbandonTot	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of Emergency call origination attempts that were 
		abandoned on the reporting call agent"
	
	::=  {  statCallProcessingEntry  81  }

statCallProcLocalAttemptTot	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of Local call attempts on the reporting call agent"
	
	::=  {  statCallProcessingEntry  82  }

statCallProcLocalSuccTot	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of Local call attempts that completed successfully 
		on the reporting call agent"
	
	::=  {  statCallProcessingEntry  83  }

statCallProcLocalFailTot	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of Local call attempts that failed on the 
		reporting call agent"
	
	::=  {  statCallProcessingEntry  84  }

statCallProcLocalAbandonTot	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of Local call origination attempts that were 
		abandoned on the reporting call agent"
	
	::=  {  statCallProcessingEntry  85  }

statCallProcTollfreeAttemptTot	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of Toll Free call attempts on the reporting 
		call agent"
	
	::=  {  statCallProcessingEntry  86  }

statCallProcTollfreeSuccTot	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of Toll Free call attempts that completed 
		successfully on the reporting call agent"
	
	::=  {  statCallProcessingEntry  87  }

statCallProcTollfreeFailTot	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of Toll Free call attempts that failed on the 
		reporting call agent"
	
	::=  {  statCallProcessingEntry  88  }

statCallProcTollfreeAbandonTot	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of Toll Free call origination attempts that were 
		abandoned on the reporting call agent"
	
	::=  {  statCallProcessingEntry  89  }

statCallProcH323OrigAttempt	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of originating H323 call attempts on the reporting 
		call agent"
	
	::=  {  statCallProcessingEntry  90  }

statCallProcH323TermAttempt	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of terminating H323 call attempts on the reporting 
		call agent"
	
	::=  {  statCallProcessingEntry  91  }

statCallProcH323OrigFail	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of originating H323 call attempts that failed on 
		the reporting call agent"
	
	::=  {  statCallProcessingEntry  92  }

statCallProcH323TermFail	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of terminating H323 call attempts that failed on 
		the reporting call agent"
	
	::=  {  statCallProcessingEntry  93  }

statCallProcH323CallSucc	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of originating and terminating H323 call attempts 
		that completed successfully on the reporting call agent"
	
	::=  {  statCallProcessingEntry  94  }

statCallProcH323CallAbandon	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of terminating and originating H323 call attempts 
		that were abandoned on the reporting call agent"
	
	::=  {  statCallProcessingEntry  95  }

statCallProcISDNH323Call	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The total number of successfully completed calls from an ISDN 
		originator to an H323 terminator on the reporting call agent"
	
	::=  {  statCallProcessingEntry  96  }

statCallProcSS7H323Call	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The total number of successfully completed calls from an SS7 
		originator to an H323 terminator on the reporting call agent"
	
	::=  {  statCallProcessingEntry  97  }

statCallProcSIPH323Call	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The total number of successfully completed calls from a SIP 
		originator to an H323 terminator on the reporting call agent"
	
	::=  {  statCallProcessingEntry  98  }

statCallProcMGCPH323Call	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The total number of successfully completed calls from an MGCP 
		originator to an H323 terminator on the reporting call agent"
	
	::=  {  statCallProcessingEntry  99  }

statCallProcCASH323Call	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The total number of successfully completed calls from a CAS 
		originator to an H323 terminator on the reporting call agent"
	
	::=  {  statCallProcessingEntry  100  }

statCallProcH323SIPCall	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The total number of successfully completed calls from an H323 
		originator to a SIP terminator on the reporting call agent"
	
	::=  {  statCallProcessingEntry  101  }

statCallProcH323ISDNCall	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The total number of successfully completed calls from an H323 
		originator to an ISDN terminator on the reporting call agent"
	
	::=  {  statCallProcessingEntry  102  }

statCallProcH323SS7Call	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The total number of successfully completed calls from an H323 
		originator to an SS7 terminator on the reporting call agent"
	
	::=  {  statCallProcessingEntry  103  }

statCallProcH323MGCPCall	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The total number of successfully completed calls from an H323 
		originator to an MGCP terminator on the reporting call agent"
	
	::=  {  statCallProcessingEntry  104  }

statCallProcH323CASCall	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The total number of successfully completed calls from an H323 
		originator to a CAS terminator on the reporting call agent"
	
	::=  {  statCallProcessingEntry  105  }

statCallProcH323H323Call	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The total number of successfully completed calls from an H323 
		originator to an H323 terminator on the reporting call agent"
	
	::=  {  statCallProcessingEntry  106  }

statCallProcNASAuthSucc	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The total number of successful NAS Authentication Requests on 
		the reporting call agent"
	
	::=  {  statCallProcessingEntry  107  }

statCallProcNASAuthFail	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The total number of failed NAS Authentication Requests on 
		the reporting call agent"
	
	::=  {  statCallProcessingEntry  108  }

statCallProcNASOpFail	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The total number of operation failures that occurred on the 
		reporting call agent - typically indicative of a modem failure"
	
	::=  {  statCallProcessingEntry  109  }

statCallProcNASISPPortLimit	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The total number of NAS calls that failed on the reporting 
		call agent due to the port limit of a modem being exceeded"
	
	::=  {  statCallProcessingEntry  110  }

statCallProcNASNoModems	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The total number of NAS calls that failed on the reporting 
		call agent due to the unavailability of a modem"
	
	::=  {  statCallProcessingEntry  111  }

statCallProcNASCLGUnacc	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The total number of NAS calls that failed on the reporting 
		call agent due to the calling party number being blocked"
	
	::=  {  statCallProcessingEntry  112  }

statCallProcNASCLDUnacc	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The total number of NAS calls that failed on the reporting 
		call agent due to the called party number being blocked"
	
	::=  {  statCallProcessingEntry  113  }

statCallProcNASUserRequest	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The total number of User Requests - Reason Code 801 - that 
		are received in the DLCX messages on the reporting call agent"
	
	::=  {  statCallProcessingEntry  114  }

statCallProcNASLostCarrier	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The total number of Lost Carrier - Reason Code 802 - that 
		are received in the DLCX messages on the reporting call agent"
	
	::=  {  statCallProcessingEntry  115  }

statCallProcNASLostService	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The total number of Lost Service - Reason Code 803 - that 
		are received in the DLCX messages on the reporting call agent"
	
	::=  {  statCallProcessingEntry  116  }

statCallProcNASIdleService	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The total number of Idle Timeout - Reason Code 804 - that 
		are received in the DLCX messages on the reporting call agent"
	
	::=  {  statCallProcessingEntry  117  }

statCallProcNASSessionTimeout	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The total number of Session Timeout - Reason Code 805 - that 
		are received in the DLCX messages on the reporting call agent"
	
	::=  {  statCallProcessingEntry  118  }

statCallProcNASAdminReset	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The total number of Admin Reset - Reason Code 806 - that 
		are received in the DLCX messages on the reporting call agent"
	
	::=  {  statCallProcessingEntry  119  }

statCallProcNASAdminReboot	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The total number of Admin Reset - Reason Code 806 - that 
		are received in the DLCX messages on the reporting call agent"
	
	::=  {  statCallProcessingEntry  120  }

statCallProcNASPortError	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The total number of Port Error- Reason Code 808 - that 
		are received in the DLCX messages on the reporting call agent"
	
	::=  {  statCallProcessingEntry  121  }

statCallProcNASNASError	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The total number of NAS Error- Reason Code 809 - that 
		are received in the DLCX messages on the reporting call agent"
	
	::=  {  statCallProcessingEntry  122  }

statCallProcNASNASRequest	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The total number of NAS Request - Reason Code 810 - that 
		are received in the DLCX messages on the reporting call agent"
	
	::=  {  statCallProcessingEntry  123  }

statCallProcNASNASReboot	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The total number of NAS Reboot- Reason Code 811 - that 
		are received in the DLCX messages on the reporting call agent"
	
	::=  {  statCallProcessingEntry  124  }

statCallProcNASPortUnneeded	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The total number of Port Unneeded - Reason Code 812 - that 
		are received in the DLCX messages on the reporting call agent"
	
	::=  {  statCallProcessingEntry  125  }

statCallProcNASPortPreempted	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The total number of Port Pre-empted - Reason Code 813 - that 
		are received in the DLCX messages on the reporting call agent"
	
	::=  {  statCallProcessingEntry  126  }

statCallProcNASPortSuspended	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The total number of Port Suspended - Reason Code 814 - that 
		are received in the DLCX messages on the reporting call agent"
	
	::=  {  statCallProcessingEntry  127  }

statCallProcNASServiceUnavail	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The total number of Service Unavailable - Reason Code 
		815 - that are received in the DLCX messages on the reporting 
		call agent"
	
	::=  {  statCallProcessingEntry  128  }

statCallProcNASCallback	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The total number of NAS Callback - Reason Code 816 - that 
		are received in the DLCX messages on the reporting call agent"
	
	::=  {  statCallProcessingEntry  129  }

statCallProcNASUserError	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The total number of User Error - Reason Code 817 - that 
		are received in the DLCX messages on the reporting call agent"
	
	::=  {  statCallProcessingEntry  130  }

statCallProcNASHostRequest	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The total number of Host Request - Reason Code 818 - that 
		are received in the DLCX messages on the reporting call agent"
	
	::=  {  statCallProcessingEntry  131  }


statTrunkTable        OBJECT-TYPE
        SYNTAX  SEQUENCE  OF  StatTrunkEntry
        MAX-ACCESS      not-accessible
        STATUS	obsolete
        DESCRIPTION
                "Trunk Statistics."
        ::=  { callAgentStatistics  5 }

statTrunkEntry        OBJECT-TYPE
        SYNTAX  StatTrunkEntry
        MAX-ACCESS      not-accessible
        STATUS	obsolete
        DESCRIPTION
                "Row description for trunk statistics."
        INDEX   {  statTrunkComponentID, statTrunkTrkGrpType, statTrunkTrkGrpID, statTrunkTrkID  }
        ::=  { statTrunkTable 1 }

StatTrunkEntry  ::=  SEQUENCE {
        statTrunkComponentID  DisplayString,
	statTrunkDOW  DayOfWeek,
	statTrunkTOD  TimeOfDay,
	statTrunkTrkGrpType  DisplayString,
        statTrunkTrkGrpID    INTEGER,
        statTrunkTrkID    INTEGER,
        statTrunkCallAttemptIncoming    Counter32,
        statTrunkCallAttemptOutgoing	Counter32,
        statTrunkCallAttemptTot    Counter32,
        statTrunkUsageIncoming    Counter32,
        statTrunkUsageOutgoing    Counter32,
        statTrunkUsageTot    Counter32,
        statTrunkOOS    Counter32,
        statTrunkOOSTime    Counter32
}

statTrunkComponentID  OBJECT-TYPE
        SYNTAX  DisplayString
        MAX-ACCESS      read-only
        STATUS	obsolete


        DESCRIPTION
                "Component Identifier"

        ::=  {  statTrunkEntry  1  }

statTrunkDOW	OBJECT-TYPE 
	SYNTAX	DayOfWeek 
	MAX-ACCESS	read-only 
	STATUS	obsolete
 
	
	DESCRIPTION
		"Day of week statistics was collected."
	
	::=  {  statTrunkEntry  2  }

statTrunkTOD	OBJECT-TYPE 
	SYNTAX	TimeOfDay 
	MAX-ACCESS	read-only 
	STATUS	obsolete
 
	
	DESCRIPTION
		"Time of day statistics was collected in XX minutes interval"
	
	::=  {  statTrunkEntry  3  }

statTrunkTrkGrpType	OBJECT-TYPE 
	SYNTAX	DisplayString 
	MAX-ACCESS	read-only 
	STATUS	obsolete
 
	
	DESCRIPTION
		"The signaling type of the reporting trunk group"
	
	::=  {  statTrunkEntry  4  }

statTrunkTrkGrpID	OBJECT-TYPE 
	SYNTAX	INTEGER ( 0..2147483647 )
	MAX-ACCESS	read-only 
	STATUS	obsolete
 
	
	DESCRIPTION
		"The identification number of the reporting trunk group"
	
	::=  {  statTrunkEntry  5  }

statTrunkTrkID	OBJECT-TYPE 
	SYNTAX	INTEGER ( 0..2147483647 )
	MAX-ACCESS	read-only 
	STATUS	obsolete
 
	
	DESCRIPTION
		"Trunk ID (CIC)"
	
	::=  {  statTrunkEntry  6  }

statTrunkCallAttemptIncoming	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	obsolete
 
	
	DESCRIPTION
		"The number of times the system recognizes an incoming seizure 
		for any trunk within the reporting trunk group"
	
	::=  {  statTrunkEntry  7  }

statTrunkCallAttemptOutgoing	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	obsolete
 
	
	DESCRIPTION
		"The number of times the system tries to access any trunk for 
		an outbound call within the reporting trunk group"
	
	::=  {  statTrunkEntry  8  }

statTrunkCallAttemptTot	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	obsolete
 
	
	DESCRIPTION
		"TBD"
	
	::=  {  statTrunkEntry  9  }

statTrunkUsageIncoming	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	obsolete
 
	
	DESCRIPTION
		"Summation of the number of trunk circuits within the 
		reporting trunk group marked as busy with originating calls 
		taken every 100 seconds during the interval"
	
	::=  {  statTrunkEntry  10  }

statTrunkUsageOutgoing	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	obsolete
 
	
	DESCRIPTION
		"Summation of the number of trunk circuits within the 
		reporting trunk group marked as busy with terminating calls 
		taken every 100 seconds during the interval"
	
	::=  {  statTrunkEntry  11  }

statTrunkUsageTot	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	obsolete
 
	
	DESCRIPTION
		"Summation of the incoming busy trunk and the outgoing busy 
		trunk counters for the reporting trunk group"
	
	::=  {  statTrunkEntry  12  }

statTrunkOOS	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	obsolete
 
	
	DESCRIPTION
		"The number of transitions to the locally blocked state for 
		all trunks within the reporting trunk group"
	
	::=  {  statTrunkEntry  13  }

statTrunkOOSTime	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	obsolete
 
	
	DESCRIPTION
		"TBD"
	
	::=  {  statTrunkEntry  14  }


statSIATable	OBJECT-TYPE
	SYNTAX	SEQUENCE  OF  StatSIAEntry
	MAX-ACCESS	not-accessible
	STATUS	current
 	DESCRIPTION
		"SIA Statistics."
	::=  { callAgentStatistics  6 }

statSIAEntry	OBJECT-TYPE
	SYNTAX	StatSIAEntry
	MAX-ACCESS	not-accessible
	STATUS	current
 	DESCRIPTION
		"Row description for SIA Statistics Table."
	INDEX	{  statSIAComponentID  }
	::=  { statSIATable 1 }

StatSIAEntry  ::=  SEQUENCE {
	statSIAComponentID  DisplayString,
	statSIADOW  DayOfWeek,
	statSIATOD  TimeOfDay,
	statSIASIPInMsg  Counter32,
	statSIASIPInMsgSucc  Counter32,
	statSIASIPOutMsg  Counter32,
	statSIASIPOutMsgSucc  Counter32,
	statSIASIPMsgREQRETRANRcv  Counter32,
	statSIASIPMsgREQRETRANXmit  Counter32,
	statSIASIPMsgRSPRETRANRcv  Counter32,
	statSIASIPMsgRSPRETRANXmit  Counter32,
	statSIASIPT1TimerExpired  Counter32,
	statSIASIPT2TimerReached  Counter32,
	statSIASIPMsgINVITERcv  Counter32,
	statSIASIPMsgINVITEXmit  Counter32,
	statSIASIPMsgCANCELRcv  Counter32,
	statSIASIPMsgCANCELXmit  Counter32,
	statSIASIPMsgBYERcv  Counter32,
	statSIASIPMsgBYEXmit  Counter32,
	statSIASIPMsgACKRcv  Counter32,
	statSIASIPMsgACKXmit  Counter32,
	statSIASIPMsgOPTIONRcv  Counter32,
	statSIASIPMsgOPTIONXmit  Counter32,
	statSIASIPMsgREGISTERRcv  Counter32,
	statSIASIPMsgREGISTERXmit  Counter32,
	statSIASIPMsgINFORcv  Counter32,
	statSIASIPMsgINFOXmit  Counter32,
	statSIASIPMsgNotifyRcv  Counter32,
	statSIASIPMsgNotifyXmit  Counter32,
	statSIASIP100Rcv  Counter32,
	statSIASIP100Xmit  Counter32,
	statSIASIP18xRcv  Counter32,
	statSIASIP18xXmit  Counter32,
	statSIASIP200Rcv  Counter32,
	statSIASIP200Xmit  Counter32,
	statSIASIP3xxRcv  Counter32,
	statSIASIP3xxXmit  Counter32,
	statSIASIP4xxRcv  Counter32,
	statSIASIP4xxXmit  Counter32,
	statSIASIP5xxRcv  Counter32,
	statSIASIP5xxXmit  Counter32,
	statSIASIP6xxRcv  Counter32,
	statSIASIP6xxXmit  Counter32,
	statSIASIP7xxRcv  Counter32,
	statSIASIP7xxXmit  Counter32,
	statSIASIPOutCallsInit  Counter32,
	statSIASIPOutCallsSucc  Counter32,
	statSIASIPOutCallsFail  Counter32,
	statSIASIPInCallsInit  Counter32,
	statSIASIPInCallsSucc  Counter32,
	statSIASIPinCallsFail  Counter32,
	statSIASIPTotCallsSucc  Counter32,
	statSIASIPTotCallsFail  Counter32,
	statSIASIPOutMsgFail  Counter32,
	statSIASIPInMsgFail  Counter32,
	statSIASIPMsgProvRSPRETRANRcv	Counter32,
	statSIASIPMsgProvRSPRETRANXmit	Counter32,
	statSIASIPMsgPRACKRcv	Counter32,
	statSIASIPMsgPRACKXmit	Counter32,
	statSIASIPMsgSUBSCRIBERcv	Counter32,
	statSIASIPMsgSUBSCRIBEXmit	Counter32,
	statSIASIPMsgREFERRcv	Counter32,
	statSIASIPMsgREFERXmit	Counter32,
	statSIASIPMsgREFERREPLACESRcv	Counter32,
	statSIASIPMsgINVITEREPLACESXmit	Counter32,
	statSIASIPMsgINVITEREPLACESRcv	Counter32,
	statSIASIPMsgREL100Rcv	Counter32,
	statSIASIPMsgREL100Xmit	Counter32,
	statSIASIPMsgUNSUPPORTEDRcv	Counter32,
	statSIASIPMsgUPDATERcv	Counter32,
	statSIASIPMsgUPDATEXmit	Counter32,
	statSIARefreshesXmit	Counter32,
	statSIATotSessTimerFail	Counter32
	}

statSIAComponentID	OBJECT-TYPE 
	SYNTAX	DisplayString 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"SIA Component Identifier"
	
	::=  {  statSIAEntry  1  }

statSIADOW	OBJECT-TYPE 
	SYNTAX	DayOfWeek 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"Day of week statistics was collected."
	
	::=  {  statSIAEntry  2  }

statSIATOD	OBJECT-TYPE 
	SYNTAX	TimeOfDay 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"Time of day statistics was collected in XX minutes interval"
	
	::=  {  statSIAEntry  3  }

statSIASIPInMsg	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of SIP messages the reporting call agent or 
		feature server attempted to receive"
	
	::=  {  statSIAEntry  4  }

statSIASIPInMsgSucc	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of SIP messages the reporting call agent or 
		feature server successfully received"
	
	::=  {  statSIAEntry  5  }

statSIASIPOutMsg	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of SIP messages the reporting call agent or 
		feature server attempted to send"
	
	::=  {  statSIAEntry  6  }

statSIASIPOutMsgSucc	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of SIP messages the reporting call agent or 
		feature server successfully sent"
	
	::=  {  statSIAEntry  7  }

statSIASIPMsgREQRETRANRcv	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of SIP request retransmission messages the 
		reporting call agent or feature server received"
	
	::=  {  statSIAEntry  8  }

statSIASIPMsgREQRETRANXmit	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of SIP request retransmission messages the 
		reporting call agent or feature server sent"
	
	::=  {  statSIAEntry  9  }

statSIASIPMsgRSPRETRANRcv	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of SIP response retransmission messages the 
		reporting call agent or feature server received"
	
	::=  {  statSIAEntry  10  }

statSIASIPMsgRSPRETRANXmit	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of SIP response retransmission messages the 
		reporting call agent or feature server sent"
	
	::=  {  statSIAEntry  11  }

statSIASIPT1TimerExpired	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of SIP T1 Timer expirations that occurred on the 
		reporting call agent or feature server received over the 
		collection interval"
	
	::=  {  statSIAEntry  12  }

statSIASIPT2TimerReached	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of SIP T2 Timer expirations that occurred on the 
		reporting call agent or feature server received over the 
		collection interval"
	
	::=  {  statSIAEntry  13  }

statSIASIPMsgINVITERcv	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of SIP INVITE messages the reporting call agent 
		or feature server received"
	
	::=  {  statSIAEntry  14  }

statSIASIPMsgINVITEXmit	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of SIP INVITE messages the reporting call agent 
		or feature server sent"
	
	::=  {  statSIAEntry  15  }

statSIASIPMsgCANCELRcv	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of SIP CANCEL messages the reporting call agent 
		or feature server received"
	
	::=  {  statSIAEntry  18  }

statSIASIPMsgCANCELXmit	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of SIP CANCEL messages the reporting call agent 
		or feature server sent"
	
	::=  {  statSIAEntry  19  }

statSIASIPMsgBYERcv	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of SIP BYE messages the reporting call agent 
		or feature server received"
	
	::=  {  statSIAEntry  20  }

statSIASIPMsgBYEXmit	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of SIP BYE messages the reporting call agent 
		or feature server sent"
	
	::=  {  statSIAEntry  21  }

statSIASIPMsgACKRcv	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of SIP ACK messages the reporting call agent 
		or feature server received"
	
	::=  {  statSIAEntry  22  }

statSIASIPMsgACKXmit	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of SIP ACK messages the reporting call agent 
		or feature server sent"
	
	::=  {  statSIAEntry  23  }

statSIASIPMsgOPTIONRcv	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of SIP OPTIONS messages the reporting call agent 
		or feature server received"
	
	::=  {  statSIAEntry  24  }

statSIASIPMsgOPTIONXmit	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of SIP OPTIONS messages the reporting call agent 
		or feature server sent"
	
	::=  {  statSIAEntry  25  }

statSIASIPMsgREGISTERRcv	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of SIP REGISTER messages the reporting call agent 
		or feature server received"
	
	::=  {  statSIAEntry  26  }

statSIASIPMsgREGISTERXmit	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of SIP REGISTER messages the reporting call agent 
		or feature server sent"
	
	::=  {  statSIAEntry  27  }

statSIASIPMsgINFORcv	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of SIP INFO messages the reporting call agent 
		or feature server received"
	
	::=  {  statSIAEntry  28  }

statSIASIPMsgINFOXmit	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of SIP INFO messages the reporting call agent 
		or feature server sent"
	
	::=  {  statSIAEntry  29  }

statSIASIPMsgNotifyRcv	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of SIP NOTIFY messages the reporting call agent 
		or feature server received"
	
	::=  {  statSIAEntry  30  }

statSIASIPMsgNotifyXmit	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of SIP NOTIFY messages the reporting call agent 
		or feature server sent"
	
	::=  {  statSIAEntry  31  }

statSIASIP100Rcv	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	DESCRIPTION
		"The number of 100 class (TRYING) messages the reporting 
		call agent or feature server received"
	
	::=  {  statSIAEntry  32  }

statSIASIP100Xmit	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of 100 class (TRYING) messages the reporting 
		call agent or feature server sent"
	
	::=  {  statSIAEntry  33  }

statSIASIP18xRcv	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of 18x class (INFORMATIONAL) messages the 
		reporting call agent or feature server received"
	
	::=  {  statSIAEntry  34  }

statSIASIP18xXmit	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of 18x class (INFORMATIONAL) messages the 
		reporting call agent or feature server sent"
	
	::=  {  statSIAEntry  35  }

statSIASIP200Rcv	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of 200 class (SUCCESS) messages the reporting 
		call agent or feature server received"
	
	::=  {  statSIAEntry  36  }

statSIASIP200Xmit	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of 200 class (SUCCESS) messages the reporting 
		call agent or feature server sent"
	
	::=  {  statSIAEntry  37  }

statSIASIP3xxRcv	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of 3xx class (REDIRECTION) messages the 
		reporting call agent or feature server received"
	
	::=  {  statSIAEntry  38  }

statSIASIP3xxXmit	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of 3xx class (REDIRECTION) messages the 
		reporting call agent or feature server sent"
	
	::=  {  statSIAEntry  39  }

statSIASIP4xxRcv	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of 4xx class (REQUEST FAILURES) messages the 
		reporting call agent or feature server received"
	
	::=  {  statSIAEntry  40  }

statSIASIP4xxXmit	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of 4xx class (REQUEST FAILURES) messages the 
		reporting call agent or feature server sent"
	
	::=  {  statSIAEntry  41  }

statSIASIP5xxRcv	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of 5xx class (SERVER FAILURES) messages the 
		reporting call agent or feature server received"
	
	::=  {  statSIAEntry  42  }

statSIASIP5xxXmit	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of 5xx class (SERVER FAILURES) messages the 
		reporting call agent or feature server sent"
	
	::=  {  statSIAEntry  43  }

statSIASIP6xxRcv	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of 6xx class (GLOBAL FAILURES) messages the 
		reporting call agent or feature server received"
	
	::=  {  statSIAEntry  44  }

statSIASIP6xxXmit	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of 6xx class (GLOBAL FAILURES) messages the 
		reporting call agent or feature server sent"
	
	::=  {  statSIAEntry  45  }

statSIASIP7xxRcv	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of 7xx class (RESERVED) messages the reporting 
		call agent or feature server received"
	
	::=  {  statSIAEntry  46  }

statSIASIP7xxXmit	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of 7xx class (RESERVED) messages the reporting 
		call agent or feature server sent"
	
	::=  {  statSIAEntry  47  }

statSIASIPOutCallsInit	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of outgoing SIP call initializations on the 
		reporting call agent"
	
	::=  {  statSIAEntry  48  }

statSIASIPOutCallsSucc	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of successful outgoing SIP calls on the 
		reporting call agent"
	
	::=  {  statSIAEntry  49 }

statSIASIPOutCallsFail	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of failed outgoing SIP calls on the 
		reporting call agent"
	
	::=  {  statSIAEntry  50  }

statSIASIPInCallsInit	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of incoming SIP call initializations on the 
		reporting call agent"
	
	::=  {  statSIAEntry  51  }

statSIASIPInCallsSucc	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of successful incoming SIP calls on the 
		reporting call agent"
	
	::=  {  statSIAEntry  52  }

statSIASIPinCallsFail	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of failed incoming SIP calls on the 
		reporting call agent"
	
	::=  {  statSIAEntry  53  }

statSIASIPTotCallsSucc	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The total number of successfully completed SIP calls on the 
		reporting call agent"
	
	::=  {  statSIAEntry  54  }

statSIASIPTotCallsFail	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The total number of unsuccessfully completed SIP calls on the 
		reporting call agent"
	
	::=  {  statSIAEntry  55  }

statSIASIPOutMsgFail	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of outgoing SIP message attempts that were not 
		successfully transmitted by the reporting call agent"
	
	::=  {  statSIAEntry  56  }

statSIASIPInMsgFail	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of incoming SIP message attempts that were not 
		successfully received by the reporting call agent"
	
	::=  {  statSIAEntry  57  }

statSIASIPMsgProvRSPRETRANRcv	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of SIP provisioning response retransmission 
		messages the reporting call agent or feature server received"
	
	::=  {  statSIAEntry  58 }

statSIASIPMsgProvRSPRETRANXmit	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of SIP provisioning response retransmission 
		messages the reporting call agent or feature server sent"
	
	::=  {  statSIAEntry  59 }

statSIASIPMsgPRACKRcv	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of SIP PRACK messages the reporting call agent 
		or feature server received"
	
	::=  {  statSIAEntry  60 }

statSIASIPMsgPRACKXmit	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of SIP PRACK messages the reporting call agent 
		or feature server sent"
	
	::=  {  statSIAEntry  61 }

statSIASIPMsgSUBSCRIBERcv	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of SIP SUBSCRIBE messages the reporting call agent 
		or feature server received"
	
	::=  {  statSIAEntry  62 }

statSIASIPMsgSUBSCRIBEXmit	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of SIP SUBSCRIBE messages the reporting call agent 
		or feature server sent"
	
	::=  {  statSIAEntry  63 }

statSIASIPMsgREFERRcv	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of SIP REFER messages the reporting call agent 
		or feature server received"
	
	::=  {  statSIAEntry  64 }

statSIASIPMsgREFERXmit	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of SIP REFER messages the reporting call agent 
		or feature server sent"
	
	::=  {  statSIAEntry  65 }

statSIASIPMsgREFERREPLACESRcv	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of SIP REFER REPLACES messages the reporting 
		call agent or feature server received"
	
	::=  {  statSIAEntry  66 }

statSIASIPMsgINVITEREPLACESXmit	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of SIP INVITE REPLACES messages the reporting 
		call agent or feature server sent"
	
	::=  {  statSIAEntry  67 }

statSIASIPMsgINVITEREPLACESRcv	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of SIP INVITE REPLACES messages the reporting 
		call agent or feature server received"
	
	::=  {  statSIAEntry  68 }

statSIASIPMsgREL100Rcv	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of REL100 class (TRYING) messages the reporting 
		call agent or feature server received"
	
	::=  {  statSIAEntry  69 }

statSIASIPMsgREL100Xmit	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of REL100 class (TRYING) messages the reporting 
		call agent or feature server sent"
	
	::=  {  statSIAEntry  70 }

statSIASIPMsgUNSUPPORTEDRcv	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of unsupported SIP messages the reporting 
		call agent or feature server received"
	
	::=  {  statSIAEntry  71 }

statSIASIPMsgUPDATERcv	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of SIP UPDATE messages the reporting call agent 
		or feature server received"
	
	::=  {  statSIAEntry  72 }

statSIASIPMsgUPDATEXmit	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of SIP UPDATE messages the reporting call agent 
		or feature server sent"
	
	::=  {  statSIAEntry  73 }

statSIARefreshesXmit	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of SIP message refreshes that occurred on the 
		reporting call agent"
	
	::=  {  statSIAEntry  74 }

statSIATotSessTimerFail	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of call failures due to session timer expiry 
		that occurred on the reporting call agent"
	
	::=  {  statSIAEntry  75 }

statISDNTranslationTable	OBJECT-TYPE
	SYNTAX	SEQUENCE  OF  StatISDNTranslationEntry
	MAX-ACCESS	not-accessible
	STATUS	current
 	DESCRIPTION
		"ISDN Translation Statistics ."
	::=  { callAgentStatistics  7 }


statISDNTranslationEntry	OBJECT-TYPE
	SYNTAX	StatISDNTranslationEntry
	MAX-ACCESS	not-accessible
	STATUS	current
 	DESCRIPTION
		"Row description for ISDN Translation Table."
	INDEX	{  statISDNTransComponentID  }
	::=  { statISDNTranslationTable 1 }

StatISDNTranslationEntry  ::=  SEQUENCE {
	statISDNTransComponentID  DisplayString,
	statISDNTransDOW  DayOfWeek,
	statISDNTransTOD  TimeOfDay,
	statISDNTransMsgSETUPXmit  Counter32,
	statISDNTransMsgSETUPRcv  Counter32,
	statISDNTransMsgSETUPACKXmit  Counter32,
	statISDNTransMsgSETUPACKRcv  Counter32,
	statISDNTransMsgCALLPROCEEDXmit  Counter32,
	statISDNTransMsgCALLPROCEEDRcv  Counter32,
	statISDNTransMsgALERTINGXmit  Counter32,
	statISDNTransMsgALERTINGRcv  Counter32,
	statISDNTransMsgPROGRESSXmit  Counter32,
	statISDNTransMsgPROGRESSRcv  Counter32,
	statISDNTransMsgCONNECTXmit  Counter32,
	statISDNTransMsgCONNECTRcv  Counter32,
	statISDNTransMsgCONNECTACKXmit  Counter32,
	statISDNTransMsgCONNECTACKRcv  Counter32,
	statISDNTransMsgDISCONNECTXmit  Counter32,
	statISDNTransMsgDISCONNECTRcv  Counter32,
	statISDNTransMsgRELEASEXmit  Counter32,
	statISDNTransMsgRELEASERcv  Counter32,
	statISDNTransMsgRELEASECOMPLETEXmit  Counter32,
	statISDNTransMsgRELEASECOMPLETERcv  Counter32,
	statISDNTransMsgRESTARTXmit  Counter32,
	statISDNTransMsgRESTARTRcv  Counter32,
	statISDNTransMsgRESTARTACKXmit  Counter32,
	statISDNTransMsgRESTARTACKRcv  Counter32,
	statISDNTransMsgINFORMATIONXmit  Counter32,
	statISDNTransMsgINFORMATIONRcv  Counter32,
	statISDNTransMsgNOTIFYXmit  Counter32,
	statISDNTransMsgNOTIFYRcv  Counter32,
	statISDNTransMsgSTATUSXmit  Counter32,
	statISDNTransMsgSTATUSRcv  Counter32,
	statISDNTransMsgSTATUSENQUIRYXmit  Counter32,
	statISDNTransMsgSTATUSENQUIRYRcv  Counter32,
	statISDNTransMsgSERVICEXmit  Counter32,
	statISDNTransMsgSERVICERcv  Counter32,
	statISDNTransMsgSERVICEACKXmit  Counter32,
	statISDNTransMsgSERVICEACKRcv  Counter32,
	statISDNTransMsgFACILITYXmit  Counter32,
	statISDNTransMsgFACILITYRcv  Counter32,
        statISDNTransMsgSUSPENDXmit  Counter32,
        statISDNTransMsgSUSPENDRcv  Counter32,
        statISDNTransMsgSUSPENDACKXmit  Counter32,
        statISDNTransMsgSUSPENDACKRcv  Counter32,
        statISDNTransMsgSUSPENDREJXmit  Counter32,
        statISDNTransMsgSUSPENDREJRcv  Counter32,
        statISDNTransMsgRESUMEXmit  Counter32,
        statISDNTransMsgRESUMERcv  Counter32,
        statISDNTransMsgRESUMEACKXmit  Counter32,
        statISDNTransMsgRESUMEACKRcv  Counter32,
        statISDNTransMsgRESUMEREJXmit  Counter32,
        statISDNTransMsgRESUMEREJRcv  Counter32,
        statISDNTransMsgUSERINFOXmit  Counter32,
        statISDNTransMsgUSERINFORcv  Counter32,
        statISDNTransMsgCONGCNTLXmit  Counter32,
        statISDNTransMsgCONGCTRLRcv  Counter32,
        statISDNTransMsgSEGMENTXmit  Counter32,
        statISDNTransMsgSEGMENTRcv  Counter32
	}
statISDNTransComponentID	OBJECT-TYPE 
	SYNTAX	DisplayString 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"ISDN Component Identifier"
	
	::=  {  statISDNTranslationEntry  1  }

statISDNTransDOW	OBJECT-TYPE 
	SYNTAX	DayOfWeek 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"Day of week statistics was collected."
	
	::=  {  statISDNTranslationEntry  3  }

statISDNTransTOD	OBJECT-TYPE 
	SYNTAX	TimeOfDay 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"Time of day statistics was collected in XX minutes interval"
	
	::=  {  statISDNTranslationEntry  4  }

statISDNTransMsgSETUPXmit	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of ISDN SETUP messages sent from the reporting 
		call agent"
	
	::=  {  statISDNTranslationEntry  5  }

statISDNTransMsgSETUPRcv	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of ISDN SETUP messages received by the reporting 
		call agent"
	
	::=  {  statISDNTranslationEntry  6  }

statISDNTransMsgSETUPACKXmit	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of ISDN SETUP ACK messages sent from the reporting 
		call agent"
	
	::=  {  statISDNTranslationEntry  7  }

statISDNTransMsgSETUPACKRcv	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of ISDN SETUP ACK messages received by the 
		reporting call agent"
	
	::=  {  statISDNTranslationEntry  8  }

statISDNTransMsgCALLPROCEEDXmit	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of ISDN CALL PROCEED messages sent from the 
		reporting call agent"
	
	::=  {  statISDNTranslationEntry  9  }

statISDNTransMsgCALLPROCEEDRcv	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of ISDN CALL PROCEED messages received by the 
		reporting call agent"
	
	::=  {  statISDNTranslationEntry  10  }

statISDNTransMsgALERTINGXmit	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of ISDN ALERTING messages sent from the 
		reporting call agent"
	
	::=  {  statISDNTranslationEntry  11  }

statISDNTransMsgALERTINGRcv	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of ISDN ALERTING messages received by the 
		reporting call agent"
	
	::=  {  statISDNTranslationEntry  12  }

statISDNTransMsgPROGRESSXmit	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of ISDN PROGRESS messages sent from the 
		reporting call agent"
	
	::=  {  statISDNTranslationEntry  13  }

statISDNTransMsgPROGRESSRcv	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of ISDN PROGRESS messages received by the 
		reporting call agent"
	
	::=  {  statISDNTranslationEntry  14  }

statISDNTransMsgCONNECTXmit	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of ISDN CONNECT messages sent from the 
		reporting call agent"
	
	::=  {  statISDNTranslationEntry  15  }

statISDNTransMsgCONNECTRcv	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of ISDN CONNECT messages received by the 
		reporting call agent"
	
	::=  {  statISDNTranslationEntry  16  }

statISDNTransMsgCONNECTACKXmit	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of ISDN CONNECT ACK messages sent from the 
		reporting call agent"
	
	::=  {  statISDNTranslationEntry  17  }

statISDNTransMsgCONNECTACKRcv	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of ISDN CONNECT ACK messages received by the 
		reporting call agent"
	
	::=  {  statISDNTranslationEntry  18  }

statISDNTransMsgDISCONNECTXmit	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of ISDN DISCONNECT messages sent from the 
		reporting call agent"
	
	::=  {  statISDNTranslationEntry  19  }

statISDNTransMsgDISCONNECTRcv	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of ISDN DISCONNECT messages received by the 
		reporting call agent"
	
	::=  {  statISDNTranslationEntry  20  }

statISDNTransMsgRELEASEXmit	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of ISDN RELEASE messages sent from the 
		reporting call agent"
	
	::=  {  statISDNTranslationEntry  21  }

statISDNTransMsgRELEASERcv	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of ISDN RELEASE messages received by the 
		reporting call agent"
	
	::=  {  statISDNTranslationEntry  22  }

statISDNTransMsgRELEASECOMPLETEXmit	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of ISDN RELEASE COMPLETE messages sent from the 
		reporting call agent"
	
	::=  {  statISDNTranslationEntry  23  }

statISDNTransMsgRELEASECOMPLETERcv	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of ISDN RELEASE COMPLETE messages received by the 
		reporting call agent"
	
	::=  {  statISDNTranslationEntry  24  }

statISDNTransMsgRESTARTXmit	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of ISDN RESTART messages sent from the 
		reporting call agent"
	
	::=  {  statISDNTranslationEntry  25  }

statISDNTransMsgRESTARTRcv	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of ISDN RESTART messages received by the 
		reporting call agent"
	
	::=  {  statISDNTranslationEntry  26  }

statISDNTransMsgRESTARTACKXmit	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of ISDN RESTART ACK messages sent from the 
		reporting call agent"
	
	::=  {  statISDNTranslationEntry  27  }

statISDNTransMsgRESTARTACKRcv	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of ISDN RESTART ACK messages received by the 
		reporting call agent"
	
	::=  {  statISDNTranslationEntry  28  }

statISDNTransMsgINFORMATIONXmit	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of ISDN INFORMATION messages sent from the 
		reporting call agent"
	
	::=  {  statISDNTranslationEntry  29  }

statISDNTransMsgINFORMATIONRcv	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of ISDN INFORMATION messages received by the 
		reporting call agent"
	
	::=  {  statISDNTranslationEntry  30  }

statISDNTransMsgNOTIFYXmit	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of ISDN NOTIFY messages sent from the 
		reporting call agent"
	
	::=  {  statISDNTranslationEntry  31  }

statISDNTransMsgNOTIFYRcv	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of ISDN NOTIFY messages received by the 
		reporting call agent"
	
	::=  {  statISDNTranslationEntry  32  }

statISDNTransMsgSTATUSXmit	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of ISDN STATUS messages sent from the 
		reporting call agent"
	
	::=  {  statISDNTranslationEntry  33  }

statISDNTransMsgSTATUSRcv	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of ISDN STATUS messages received by the 
		reporting call agent"
	
	::=  {  statISDNTranslationEntry  34  }

statISDNTransMsgSTATUSENQUIRYXmit	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of ISDN STATUS ENQUIRY messages sent from the 
		reporting call agent"
	
	::=  {  statISDNTranslationEntry  35  }

statISDNTransMsgSTATUSENQUIRYRcv	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of ISDN STATUS ENQUIRY messages received by the 
		reporting call agent"
	
	::=  {  statISDNTranslationEntry  36  }

statISDNTransMsgSERVICEXmit	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of ISDN SERVICE messages sent from the 
		reporting call agent"
	
	::=  {  statISDNTranslationEntry  37  }

statISDNTransMsgSERVICERcv	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of ISDN SERVICE messages received by the 
		reporting call agent"
	
	::=  {  statISDNTranslationEntry  38  }

statISDNTransMsgSERVICEACKXmit	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of ISDN SERVICE ACK messages sent from the 
		reporting call agent"
	
	::=  {  statISDNTranslationEntry  39  }

statISDNTransMsgSERVICEACKRcv	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of ISDN SERVICE ACK messages received by the 
		reporting call agent"
	
	::=  {  statISDNTranslationEntry  40  }

statISDNTransMsgFACILITYXmit	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of ISDN FACILITY messages sent from the reporting 
		call agent"
	
	::=  {  statISDNTranslationEntry  41  }

statISDNTransMsgFACILITYRcv	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of ISDN FACILITY messages received by the 
		reporting call agent"
	
	::=  {  statISDNTranslationEntry  42  }

statISDNTransMsgSUSPENDXmit	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of ISDN Suspend messages sent from the reporting 
		call agent.  This counter is only applicable to ETSI PRI."
	
	::=  {  statISDNTranslationEntry  43  }

statISDNTransMsgSUSPENDRcv	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of ISDN Suspend messages received by the reporting 
		call agent.  This counter is only applicable to ETSI PRI."
	
	::=  {  statISDNTranslationEntry  44  }

statISDNTransMsgSUSPENDACKXmit	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of ISDN Suspend Acknowledge messages sent from the 
		reporting call agent.  This counter is only applicable to 
		ETSI PRI."
	
	::=  {  statISDNTranslationEntry  45  }

statISDNTransMsgSUSPENDACKRcv	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of ISDN Suspend Acknowledge messages received by 
		the reporting call agent.  This counter is only applicable to 
		ETSI PRI."
	
	::=  {  statISDNTranslationEntry  46  }

statISDNTransMsgSUSPENDREJXmit	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of ISDN Suspend Reject messages sent from the 
		reporting call agent.  This counter is only applicable to 
		ETSI PRI."
	
	::=  {  statISDNTranslationEntry  47  }

statISDNTransMsgSUSPENDREJRcv	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of ISDN Suspend Reject messages received by the 
		reporting call agent.  This counter is only applicable to 
		ETSI PRI."
	
	::=  {  statISDNTranslationEntry  48  }

statISDNTransMsgRESUMEXmit	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of ISDN Resume messages sent from the reporting 
		call agent.  This counter is only applicable to ETSI PRI."
	
	::=  {  statISDNTranslationEntry  49  }

statISDNTransMsgRESUMERcv	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of ISDN Resume messages received by the reporting 
		call agent.  This counter is only applicable to ETSI PRI."
	
	::=  {  statISDNTranslationEntry  50  }

statISDNTransMsgRESUMEACKXmit	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of ISDN Resume Acknowledge messages sent from the 
		reporting call agent.  This counter is only applicable to 
		ETSI PRI."
	
	::=  {  statISDNTranslationEntry  51  }

statISDNTransMsgRESUMEACKRcv	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of ISDN Resume Acknowledge messages received by 
		the reporting call agent.  This counter is only applicable to 
		ETSI PRI."
	
	::=  {  statISDNTranslationEntry  52  }

statISDNTransMsgRESUMEREJXmit	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of ISDN Resume Reject messages sent from the 
		reporting call agent.  This counter is only applicable to 
		ETSI PRI."
	
	::=  {  statISDNTranslationEntry  53  }

statISDNTransMsgRESUMEREJRcv	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of ISDN Resume Reject messages received by the 
		reporting call agent.  This counter is only applicable to 
		ETSI PRI."
	
	::=  {  statISDNTranslationEntry  54  }

statISDNTransMsgUSERINFOXmit	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of ISDN User Information messages sent from the 
		reporting call agent.  This counter is only applicable to 
		ETSI PRI."
	
	::=  {  statISDNTranslationEntry  55  }

statISDNTransMsgUSERINFORcv	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of ISDN User Information messages received by the 
		reporting call agent.  This counter is only applicable to 
		ETSI PRI."
	
	::=  {  statISDNTranslationEntry  56  }

statISDNTransMsgCONGCNTLXmit	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of ISDN Congestion Control messages sent from the 
		reporting call agent.  This counter is only applicable to 
		ETSI PRI."
	
	::=  {  statISDNTranslationEntry  57  }

statISDNTransMsgCONGCTRLRcv	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of ISDN Congestion Control messages received by 
		the reporting call agent.  This counter is only applicable to 
		ETSI PRI."
	
	::=  {  statISDNTranslationEntry  58  }

statISDNTransMsgSEGMENTXmit	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of ISDN Segment messages sent from the reporting 
		call agent.  This counter is only applicable to ETSI PRI."
	
	::=  {  statISDNTranslationEntry  59  }

statISDNTransMsgSEGMENTRcv	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of ISDN Segment messages received by the reporting 
		call agent.  This counter is only applicable to ETSI PRI."
	
	::=  {  statISDNTranslationEntry  60  }

statTGUsageTable        OBJECT-TYPE
        SYNTAX  SEQUENCE  OF  StatTGUsageEntry
        MAX-ACCESS      not-accessible
        STATUS  current
        DESCRIPTION
                "TG Usage Statistics ."
        ::=  { callAgentStatistics  10 }


statTGUsageEntry        OBJECT-TYPE
        SYNTAX  StatTGUsageEntry
        MAX-ACCESS      not-accessible
        STATUS  current
        DESCRIPTION
                "Row description for TG Usage Table."
        INDEX   {  statTGUsageComponentID, statTGUsageTrkGrpType, statTGUsageTrkGrpID  }
        ::=  { statTGUsageTable 1 }

StatTGUsageEntry  ::=  SEQUENCE {
        statTGUsageComponentID  DisplayString,
        statTGUsageDOW  DayOfWeek,
        statTGUsageTOD  TimeOfDay,
	statTGUsageTrkGrpType	DisplayString,
	statTGUsageTrkGrpID	DisplayString,
	statTGUsageIncomingCallAttempt	Counter32,
	statTGUsageOutgoingCallAttempt	Counter32,
	statTGUsageOutboundCallFail	Counter32,
	statTGUsageOverflowTot		Counter32,
	statTGUsageTrunkTot		Counter32,
	statTGusageIncomingBusyTrunk	Counter32,
	statTGUsageOutgoingBusyTrunk	Counter32,
	statTGUsageOOSTrunkTot		Counter32,
	statTGUsageIncomingUsageTot		Counter32,
	statTGUsageOutgoingUsageTot		Counter32,
	statTGUsageTotalUsage		Counter32,
	statTGUsageAverageUsage		Counter32
}

statTGUsageComponentID  OBJECT-TYPE
        SYNTAX  DisplayString
        MAX-ACCESS      read-only
        STATUS  current


        DESCRIPTION
                "TG Usage Component Identifier"

        ::=  {  statTGUsageEntry  1  }

statTGUsageDOW  OBJECT-TYPE
        SYNTAX  DayOfWeek
        MAX-ACCESS      read-only
        STATUS  current


        DESCRIPTION
                "Day of week statistics was collected."

        ::=  {  statTGUsageEntry  2  }

statTGUsageTOD  OBJECT-TYPE
        SYNTAX  TimeOfDay
        MAX-ACCESS      read-only
        STATUS  current


        DESCRIPTION
                "Time of day statistics was collected in XX minutes interval"

        ::=  {  statTGUsageEntry  3  }

statTGUsageTrkGrpType  OBJECT-TYPE
	SYNTAX	DisplayString
        MAX-ACCESS      read-only
        STATUS  current


        DESCRIPTION
                "The signaling type of the reporting trunk group"

        ::=  {  statTGUsageEntry  4  }

statTGUsageTrkGrpID  OBJECT-TYPE
        SYNTAX  DisplayString
        MAX-ACCESS      read-only
        STATUS  current


        DESCRIPTION
                "The identification number of the reporting trunk group"

        ::=  {  statTGUsageEntry  5  }

statTGUsageIncomingCallAttempt  OBJECT-TYPE
        SYNTAX  Counter32
        MAX-ACCESS      read-only
        STATUS  current


        DESCRIPTION
                "The number of times the system recognizes an incoming seizure 
		for any trunk within the reporting trunk group"

        ::=  {  statTGUsageEntry  7  }

statTGUsageOutgoingCallAttempt  OBJECT-TYPE
        SYNTAX  Counter32
        MAX-ACCESS      read-only
        STATUS  current


        DESCRIPTION
                "The number of times the system tries to access any trunk for 
		an outbound call within the reporting trunk group"

        ::=  {  statTGUsageEntry  8  }

statTGUsageOutboundCallFail  OBJECT-TYPE
        SYNTAX  Counter32
        MAX-ACCESS      read-only
        STATUS  current


        DESCRIPTION
                "The number of times the system tries to access any trunk for 
		an outbound call unsuccessfully within the reporting trunk 
		group"

        ::=  {  statTGUsageEntry  9  }

statTGUsageOverflowTot  OBJECT-TYPE
        SYNTAX  Counter32
        MAX-ACCESS      read-only
        STATUS  current


        DESCRIPTION
                "The number of outbound trunk call attempt failures due to 
		all trunks within the reporting trunk group being unavailable"

        ::=  {  statTGUsageEntry  10  }

statTGUsageTrunkTot  OBJECT-TYPE
        SYNTAX  Counter32
        MAX-ACCESS      read-only
        STATUS  current


        DESCRIPTION
                "The number of trunks within the reporting trunk group"

        ::=  {  statTGUsageEntry  11  }

statTGusageIncomingBusyTrunk  OBJECT-TYPE
        SYNTAX  Counter32
        MAX-ACCESS      read-only
        STATUS  current


        DESCRIPTION
                "Summation of the number of trunk circuits within the 
		reporting trunk group marked as busy with originating calls 
		taken every 100 seconds during the interval"

        ::=  {  statTGUsageEntry  12  }

statTGUsageOutgoingBusyTrunk  OBJECT-TYPE
        SYNTAX  Counter32
        MAX-ACCESS      read-only
        STATUS  current


        DESCRIPTION
                "Summation of the number of trunk circuits within the 
		reporting trunk group marked as busy with terminating calls 
		taken every 100 seconds during the interval"

        ::=  {  statTGUsageEntry  13  }

statTGUsageOOSTrunkTot  OBJECT-TYPE
        SYNTAX  Counter32
        MAX-ACCESS      read-only
        STATUS  current


        DESCRIPTION
                "The number of transitions to the locally blocked state for 
		all trunks within the reporting trunk group"

        ::=  {  statTGUsageEntry  14  }

statTGUsageIncomingUsageTot  OBJECT-TYPE
        SYNTAX  Counter32
        MAX-ACCESS      read-only
        STATUS  current


        DESCRIPTION
                "Summation of the number of trunk circuits within the 
		reporting trunk group marked as busy with originating calls 
		taken every 100 seconds during the interval"

        ::=  {  statTGUsageEntry  15  }

statTGUsageOutgoingUsageTot  OBJECT-TYPE
        SYNTAX  Counter32
        MAX-ACCESS      read-only
        STATUS  current


        DESCRIPTION
                "Summation of the number of trunk circuits within the 
		reporting trunk group marked as busy with terminating calls 
		taken every 100 seconds during the interval"

        ::=  {  statTGUsageEntry  16  }

statTGUsageTotalUsage  OBJECT-TYPE
        SYNTAX  Counter32
        MAX-ACCESS      read-only
        STATUS  current


        DESCRIPTION
                "Summation of the incoming busy trunk and the outgoing 
		busy trunk counters for the reporting trunk group"

        ::=  {  statTGUsageEntry  17  }

statTGUsageAverageUsage  OBJECT-TYPE
        SYNTAX  Counter32
        MAX-ACCESS      read-only
        STATUS  current


        DESCRIPTION
                "The total usage counter divided by the number of trunks in 
		the reporting trunk group"

        ::=  {  statTGUsageEntry  18  }


statAnnouncementTable        OBJECT-TYPE
        SYNTAX  SEQUENCE  OF  StatAnnouncementEntry
        MAX-ACCESS      not-accessible
        STATUS  current
        DESCRIPTION
                "Announcement Statistics ."
        ::=  { callAgentStatistics  14 }

statAnnouncementEntry        OBJECT-TYPE
        SYNTAX  StatAnnouncementEntry
        MAX-ACCESS      not-accessible
        STATUS  current
        DESCRIPTION
                "Row description for 0 call trunk provTable."
        INDEX   { statAnnouncementComponentID   }
        ::=  { statAnnouncementTable 1 }

StatAnnouncementEntry  ::=  SEQUENCE {
        statAnnouncementComponentID  DisplayString,
        statAnnouncementDOW  DayOfWeek,
        statAnnouncementTOD  TimeOfDay,
	statAnnouncementUnAvailable	Counter32,
	statAnnouncementCallRejected	Counter32,
	statAnnouncementAddrIncomplete	Counter32,
	statAnnouncementFacRejected	Counter32,
	statAnnouncementPre01Absent	Counter32,
	statAnnouncementPre01Present	Counter32,
	statAnnouncementHPNAAbsent	Counter32,
	statAnnouncementNoRouteDest	Counter32,
	statAnnouncementUnAllocatedNum	Counter32,
	statAnnouncementNumberChanged	Counter32,
	statAnnouncementDestOutOfOrder	Counter32,
	statAnnouncementTempDisconnect	Counter32,
	statAnnouncemenFeatureNotSubs	Counter32,
	statAnnouncementAuthcodeInvalid	Counter32,
	statAnnouncementNoRTETransit	Counter32,
	statAnnouncementCauseUnknown	Counter32
}

statAnnouncementComponentID  OBJECT-TYPE
        SYNTAX  DisplayString
        MAX-ACCESS      read-only
        STATUS  current


        DESCRIPTION
                "Component Identifier"

        ::=  {  statAnnouncementEntry  1  }

statAnnouncementDOW  OBJECT-TYPE
        SYNTAX  DayOfWeek
        MAX-ACCESS      read-only
        STATUS  current


        DESCRIPTION
                "Day of week statistics was collected."

        ::=  {  statAnnouncementEntry  2  }

statAnnouncementTOD  OBJECT-TYPE
        SYNTAX  TimeOfDay
        MAX-ACCESS      read-only
        STATUS  current


        DESCRIPTION
                "Time of day statistics was collected in XX minutes interval"

        ::=  {  statAnnouncementEntry  3  }

statAnnouncementUnAvailable  OBJECT-TYPE
        SYNTAX  Counter32
        MAX-ACCESS      read-only
        STATUS  current


        DESCRIPTION
                "The number of calls resulting in the playing of the circuit 
		unavailable announcement by the reporting call agent"

        ::=  {  statAnnouncementEntry  4  }


statAnnouncementCallRejected  OBJECT-TYPE
        SYNTAX  Counter32
        MAX-ACCESS      read-only
        STATUS  current


        DESCRIPTION
                "The number of calls resulting in the playing of the call 
		rejected announcement by the reporting call agent"

        ::=  {  statAnnouncementEntry  5  }


statAnnouncementAddrIncomplete  OBJECT-TYPE
        SYNTAX  Counter32
        MAX-ACCESS      read-only
        STATUS  current


        DESCRIPTION
                "The number of calls resulting in the playing of the address 
		incomplete announcement by the reporting call agent"

        ::=  {  statAnnouncementEntry  6  }


statAnnouncementFacRejected  OBJECT-TYPE
        SYNTAX  Counter32
        MAX-ACCESS      read-only
        STATUS  current


        DESCRIPTION
                "The number of calls resulting in the playing of the facility 
		rejected announcement by the reporting call agent"

        ::=  {  statAnnouncementEntry  7  }


statAnnouncementPre01Absent  OBJECT-TYPE
        SYNTAX  Counter32
        MAX-ACCESS      read-only
        STATUS  current


        DESCRIPTION
                "The number of calls resulting in the playing of the prefix 
		of 0 or 1 absent announcement by the reporting call agent"

        ::=  {  statAnnouncementEntry  8  }


statAnnouncementPre01Present  OBJECT-TYPE
        SYNTAX  Counter32
        MAX-ACCESS      read-only
        STATUS  current


        DESCRIPTION
                "The number of calls resulting in the playing of the 
		prefix 0 or 1 present announcement by the reporting call agent"

        ::=  {  statAnnouncementEntry  9  }


statAnnouncementHPNAAbsent  OBJECT-TYPE
        SYNTAX  Counter32
        MAX-ACCESS      read-only
        STATUS  current


        DESCRIPTION
                "The number of calls resulting in the playing of the HNPA 
		area code announcement by the reporting call agent"

        ::=  {  statAnnouncementEntry  10  }




statAnnouncementNoRouteDest  OBJECT-TYPE
        SYNTAX  Counter32
        MAX-ACCESS      read-only
        STATUS  current


        DESCRIPTION
                "The number of calls resulting in the playing of the no 
		route to destination announcement by the reporting call agent"

        ::=  {  statAnnouncementEntry  11  }

statAnnouncementUnAllocatedNum  OBJECT-TYPE
        SYNTAX  Counter32
        MAX-ACCESS      read-only
        STATUS  current


        DESCRIPTION
                "The number of calls resulting in the playing of the 
		unallocated directory number announcement by the reporting 
		call agent"

        ::=  {  statAnnouncementEntry  12  }

statAnnouncementNumberChanged  OBJECT-TYPE
        SYNTAX  Counter32
        MAX-ACCESS      read-only
        STATUS  current


        DESCRIPTION
                "The number of calls resulting in the playing of the directory 
		number changed announcement by the reporting call agent"

        ::=  {  statAnnouncementEntry  13  }

statAnnouncementDestOutOfOrder  OBJECT-TYPE
        SYNTAX  Counter32
        MAX-ACCESS      read-only
        STATUS  current


        DESCRIPTION
                "The number of calls resulting in the playing of the 
		destination out of order announcement by the reporting 
		call agent"

        ::=  {  statAnnouncementEntry  14  }

statAnnouncementTempDisconnect  OBJECT-TYPE
        SYNTAX  Counter32
        MAX-ACCESS      read-only
        STATUS  current


        DESCRIPTION
                "The number of calls resulting in the playing of the 
		temporarily disconnected announcement by the reporting 
		call agent"

        ::=  {  statAnnouncementEntry  15  }

statAnnouncemenFeatureNotSubs  OBJECT-TYPE
        SYNTAX  Counter32
        MAX-ACCESS      read-only
        STATUS  current


        DESCRIPTION
                "The number of calls resulting in the playing of the feature 
		not subscribed to announcement by the reporting call agent"

        ::=  {  statAnnouncementEntry  16  }

statAnnouncementAuthcodeInvalid  OBJECT-TYPE
        SYNTAX  Counter32
        MAX-ACCESS      read-only
        STATUS  current


        DESCRIPTION
                "The number of calls resulting in the playing of the 
		authorization code invalid announcement by the reporting 
		call agent"

        ::=  {  statAnnouncementEntry  17  }

statAnnouncementNoRTETransit  OBJECT-TYPE
        SYNTAX  Counter32
        MAX-ACCESS      read-only
        STATUS  current


        DESCRIPTION
                "The number of calls resulting in the playing of the no 
		route to specified network announcement by the reporting 
		call agent"

        ::=  {  statAnnouncementEntry  18  }

statAnnouncementCauseUnknown  OBJECT-TYPE
        SYNTAX  Counter32
        MAX-ACCESS      read-only
        STATUS  current


        DESCRIPTION
                "The number of calls resulting in the playing of the cause 
		unknown announcement by the reporting call agent"

        ::=  {  statAnnouncementEntry  19  }

statH323Table        OBJECT-TYPE
        SYNTAX  SEQUENCE  OF  StatH323Entry
        MAX-ACCESS      not-accessible
        STATUS  current
        DESCRIPTION
                "H323 Statistics ."
        ::=  { callAgentStatistics  15 }

statH323Entry        OBJECT-TYPE
        SYNTAX  StatH323Entry
        MAX-ACCESS      not-accessible
        STATUS  current
        DESCRIPTION
                "Row description for 0 call trunk provTable."
        INDEX   { statH323ComponentID   }
        ::=  { statH323Table 1 }

StatH323Entry  ::=  SEQUENCE {
        statH323ComponentID  DisplayString,
        statH323DOW  DayOfWeek,
        statH323TOD  TimeOfDay,
	statH323MsgGRQXmit  Counter32,
	statH323MsgGCFXmit  Counter32,
	statH323MsgGRJXmit  Counter32,
	statH323MsgRRQXmit  Counter32,
	statH323MsgRCFXmit  Counter32,
	statH323MsgRRJXmit  Counter32,
	statH323MsgARQXmit  Counter32,
	statH323MsgACFXmit  Counter32,
	statH323MsgARJXmit  Counter32,
	statH323MsgBRQXmit  Counter32,
	statH323MsgBCFXmit  Counter32,
	statH323MsgBRJXmit  Counter32,
	statH323MsgDRQXmit  Counter32,
	statH323MsgDCFXmit  Counter32,
	statH323MsgDRJXmit  Counter32,
	statH323MsgURQXmit  Counter32,
	statH323MsgUCFXmit  Counter32,
	statH323MsgURJXmit  Counter32,
	statH323MsgRIPXmit  Counter32,
	statH323MsgRAIXmit  Counter32,
	statH323MsgRACXmit  Counter32,
	statH323MsgGRQRcv  Counter32,
	statH323MsgGCFRcv  Counter32,
	statH323MsgGRJRcv  Counter32,
	statH323MsgRRQRcv  Counter32,
	statH323MsgRCFRcv  Counter32,
	statH323MsgRRJRcv  Counter32,
	statH323MsgARQRcv  Counter32,
	statH323MsgACFRcv  Counter32,
	statH323MsgARJRcv  Counter32,
	statH323MsgBRQRcv  Counter32,
	statH323MsgBCFRcv  Counter32,
	statH323MsgBRJRcv  Counter32,
	statH323MsgDRQRcv  Counter32,
	statH323MsgDCFRcv  Counter32,
	statH323MsgDRJRcv  Counter32,
	statH323MsgURQRcv  Counter32,
	statH323MsgUCFRcv  Counter32,
	statH323MsgURJRcv  Counter32,
	statH323MsgRIPRcv  Counter32,
	statH323MsgRAIRcv  Counter32,
	statH323MsgRACRcv  Counter32,
	statH323MsgSETUPXmit  Counter32,
	statH323MsgCONNECTXmit  Counter32,
	statH323MsgALERTXmit  Counter32,
	statH323MsgINPROGRESSXmit  Counter32,
	statH323MsgCALLPROCEEDINGXmit  Counter32,
	statH323MsgNOTIFYXmit  Counter32,
	statH323MsgINFOXmit  Counter32,
	statH323MsgUSERINFOXmit  Counter32,
	statH323MsgFACILITYXmit  Counter32,
	statH323MsgRELEASEXmit  Counter32,
	statH323MsgREJECTXmit  Counter32,
	statH323MsgPASSTHROUXmit  Counter32,
	statH323MsgSETUPRcv  Counter32,
	statH323MsgCONNECTRcv  Counter32,
	statH323MsgALERTRcv  Counter32,
	statH323MsgINPROGRESSRcv  Counter32,
	statH323MsgCALLPROCEEDINGRcv  Counter32,
	statH323MsgNOTIFYRcv  Counter32,
	statH323MsgINFORcv  Counter32,
	statH323MsgUSERINFORcv  Counter32,
	statH323MsgFACILITYRcv  Counter32,
	statH323MsgRELEASERcv  Counter32,
	statH323MsgREJECTRcv  Counter32,
	statH323MsgPASSTHROURcv  Counter32,
	statH323MsgSETUPFail  Counter32,
	statH323MsgCONNECTFail  Counter32,
	statH323MsgALERTFail  Counter32,
	statH323MsgINPROGRESSFail  Counter32,
	statH323MsgCALLPROCEEDINGFail  Counter32,
	statH323MsgNOTIFYFail  Counter32,
	statH323MsgINFOFail  Counter32,
	statH323MsgUSERINFOFail  Counter32,
	statH323MsgFACILITYFail  Counter32,
	statH323MsgRELEASEFail  Counter32,
	statH323MsgREJECTFail  Counter32,
	statH323MsgPASSTHROUFail  Counter32
}

statH323ComponentID  OBJECT-TYPE
        SYNTAX  DisplayString
        MAX-ACCESS      read-only
        STATUS  current


        DESCRIPTION
                "Component Identifier"

        ::=  {  statH323Entry  1  }

statH323DOW	OBJECT-TYPE 
	SYNTAX	DayOfWeek 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"Day of week statistics was collected."
	
	::=  {  statH323Entry  2  }

statH323TOD	OBJECT-TYPE 
	SYNTAX	TimeOfDay 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"Time of day statistics was collected in XX minutes interval"
	
	::=  {  statH323Entry  3  }

statH323MsgGRQXmit  OBJECT-TYPE
        SYNTAX  Counter32
        MAX-ACCESS      read-only
        STATUS  current


        DESCRIPTION
                "The total number of H323 GRQs transmitted by the reporting 
		call agent"

        ::=  {  statH323Entry  4  }

statH323MsgGCFXmit  OBJECT-TYPE
        SYNTAX  Counter32
        MAX-ACCESS      read-only
        STATUS  current


        DESCRIPTION
                "The total number of H323 GCFs transmitted by the reporting 
		call agent"

        ::=  {  statH323Entry  5  }

statH323MsgGRJXmit  OBJECT-TYPE
        SYNTAX  Counter32
        MAX-ACCESS      read-only
        STATUS  current


        DESCRIPTION
                "The total number of H323 GRJs received by the reporting 
		call agent"

        ::=  {  statH323Entry  6  }

statH323MsgRRQXmit  OBJECT-TYPE
        SYNTAX  Counter32
        MAX-ACCESS      read-only
        STATUS  current


        DESCRIPTION
                "The total number of H323 RRQs transmitted by the reporting 
		call agent"

        ::=  {  statH323Entry  7  }

statH323MsgRCFXmit  OBJECT-TYPE
        SYNTAX  Counter32
        MAX-ACCESS      read-only
        STATUS  current


        DESCRIPTION
                "The total number of H323 RCFs transmitted by the reporting 
		call agent"

        ::=  {  statH323Entry  8  }

statH323MsgRRJXmit  OBJECT-TYPE
        SYNTAX  Counter32
        MAX-ACCESS      read-only
        STATUS  current


        DESCRIPTION
                "The total number of H323 RRJs transmitted by the reporting 
		call agent"

        ::=  {  statH323Entry  9  }

statH323MsgARQXmit  OBJECT-TYPE
        SYNTAX  Counter32
        MAX-ACCESS      read-only
        STATUS  current


        DESCRIPTION
                "The total number of H323 ARQs transmitted by the reporting 
		call agent"

        ::=  {  statH323Entry  10  }

statH323MsgACFXmit  OBJECT-TYPE
        SYNTAX  Counter32
        MAX-ACCESS      read-only
        STATUS  current


        DESCRIPTION
                "The total number of H323 ACFs transmitted by the reporting 
		call agent"

        ::=  {  statH323Entry  11  }

statH323MsgARJXmit  OBJECT-TYPE
        SYNTAX  Counter32
        MAX-ACCESS      read-only
        STATUS  current


        DESCRIPTION
                "The total number of H323 ARJs transmitted by the reporting 
		call agent"

        ::=  {  statH323Entry  12  }

statH323MsgBRQXmit  OBJECT-TYPE
        SYNTAX  Counter32
        MAX-ACCESS      read-only
        STATUS  current


        DESCRIPTION
                "The total number of H323 BRQs transmitted by the reporting 
		call agent"

        ::=  {  statH323Entry  13  }

statH323MsgBCFXmit  OBJECT-TYPE
        SYNTAX  Counter32
        MAX-ACCESS      read-only
        STATUS  current


        DESCRIPTION
                "The total number of H323 BCFs transmitted by the reporting 
		call agent"

        ::=  {  statH323Entry  14  }

statH323MsgBRJXmit  OBJECT-TYPE
        SYNTAX  Counter32
        MAX-ACCESS      read-only
        STATUS  current


        DESCRIPTION
                "The total number of H323 BRJs transmitted by the reporting 
		call agent"

        ::=  {  statH323Entry  15  }

statH323MsgDRQXmit  OBJECT-TYPE
        SYNTAX  Counter32
        MAX-ACCESS      read-only
        STATUS  current


        DESCRIPTION
                "The total number of H323 DRQs transmitted by the reporting 
		call agent"

        ::=  {  statH323Entry  16  }

statH323MsgDCFXmit  OBJECT-TYPE
        SYNTAX  Counter32
        MAX-ACCESS      read-only
        STATUS  current


        DESCRIPTION
                "The total number of H323 DCFs transmitted by the reporting 
		call agent"

        ::=  {  statH323Entry  17  }

statH323MsgDRJXmit  OBJECT-TYPE
        SYNTAX  Counter32
        MAX-ACCESS      read-only
        STATUS  current


        DESCRIPTION
                "The total number of H323 DRJs transmitted by the reporting 
		call agent"

        ::=  {  statH323Entry  18  }

statH323MsgURQXmit  OBJECT-TYPE
        SYNTAX  Counter32
        MAX-ACCESS      read-only
        STATUS  current


        DESCRIPTION
                "The total number of H323 URQs transmitted by the reporting 
		call agent"

        ::=  {  statH323Entry  19  }

statH323MsgUCFXmit  OBJECT-TYPE
        SYNTAX  Counter32
        MAX-ACCESS      read-only
        STATUS  current


        DESCRIPTION
                "The total number of H323 UCFs transmitted by the reporting 
		call agent"

        ::=  {  statH323Entry  20  }

statH323MsgURJXmit  OBJECT-TYPE
        SYNTAX  Counter32
        MAX-ACCESS      read-only
        STATUS  current


        DESCRIPTION
                "The total number of H323 URJs transmitted by the reporting 
		call agent"

        ::=  {  statH323Entry  21  }

statH323MsgRIPXmit  OBJECT-TYPE
        SYNTAX  Counter32
        MAX-ACCESS      read-only
        STATUS  current


        DESCRIPTION
                "The total number of H323 RIPs transmitted by the reporting 
		call agent"

        ::=  {  statH323Entry  22  }

statH323MsgRAIXmit  OBJECT-TYPE
        SYNTAX  Counter32
        MAX-ACCESS      read-only
        STATUS  current


        DESCRIPTION
                "The total number of H323 RAIs transmitted by the reporting 
		call agent"

        ::=  {  statH323Entry  23  }

statH323MsgRACXmit  OBJECT-TYPE
        SYNTAX  Counter32
        MAX-ACCESS      read-only
        STATUS  current


        DESCRIPTION
                "The total number of H323 RACs transmitted by the reporting 
		call agent"

        ::=  {  statH323Entry  24  }

statH323MsgGRQRcv  OBJECT-TYPE
        SYNTAX  Counter32
        MAX-ACCESS      read-only
        STATUS  current


        DESCRIPTION
                "The total number of H323 GRQs recieved by the reporting 
		call agent"

        ::=  {  statH323Entry  25  }

statH323MsgGCFRcv  OBJECT-TYPE
        SYNTAX  Counter32
        MAX-ACCESS      read-only
        STATUS  current


        DESCRIPTION
                "The total number of H323 GCFs received by the reporting 
		call agent"

        ::=  {  statH323Entry  26  }

statH323MsgGRJRcv  OBJECT-TYPE
        SYNTAX  Counter32
        MAX-ACCESS      read-only
        STATUS  current


        DESCRIPTION
                "The total number of H323 GRJs transmitted by the reporting 
		call agent"

        ::=  {  statH323Entry  27  }

statH323MsgRRQRcv  OBJECT-TYPE
        SYNTAX  Counter32
        MAX-ACCESS      read-only
        STATUS  current


        DESCRIPTION
                "The total number of H323 RRQs received by the reporting 
		call agent"

        ::=  {  statH323Entry  28  }

statH323MsgRCFRcv  OBJECT-TYPE
        SYNTAX  Counter32
        MAX-ACCESS      read-only
        STATUS  current


        DESCRIPTION
                "The total number of H323 RCFs received by the reporting 
		call agent"

        ::=  {  statH323Entry  29  }

statH323MsgRRJRcv  OBJECT-TYPE
        SYNTAX  Counter32
        MAX-ACCESS      read-only
        STATUS  current


        DESCRIPTION
                "The total number of H323 RRJs received by the reporting 
		call agent"

        ::=  {  statH323Entry  30  }

statH323MsgARQRcv  OBJECT-TYPE
        SYNTAX  Counter32
        MAX-ACCESS      read-only
        STATUS  current


        DESCRIPTION
                "The total number of H323 ARQs received by the reporting 
		call agent"

        ::=  {  statH323Entry  31  }

statH323MsgACFRcv  OBJECT-TYPE
        SYNTAX  Counter32
        MAX-ACCESS      read-only
        STATUS  current


        DESCRIPTION
                "The total number of H323 ACFs received by the reporting 
		call agent"

        ::=  {  statH323Entry  32  }

statH323MsgARJRcv  OBJECT-TYPE
        SYNTAX  Counter32
        MAX-ACCESS      read-only
        STATUS  current


        DESCRIPTION
                "The total number of H323 ARJs received by the reporting 
		call agent"

        ::=  {  statH323Entry  33  }

statH323MsgBRQRcv  OBJECT-TYPE
        SYNTAX  Counter32
        MAX-ACCESS      read-only
        STATUS  current


        DESCRIPTION
                "The total number of H323 BRQs received by the reporting 
		call agent"

        ::=  {  statH323Entry  34  }

statH323MsgBCFRcv  OBJECT-TYPE
        SYNTAX  Counter32
        MAX-ACCESS      read-only
        STATUS  current


        DESCRIPTION
                "The total number of H323 BCFs received by the reporting 
		call agent"

        ::=  {  statH323Entry  35  }

statH323MsgBRJRcv  OBJECT-TYPE
        SYNTAX  Counter32
        MAX-ACCESS      read-only
        STATUS  current


        DESCRIPTION
                "The total number of H323 BRJs received by the reporting 
		call agent"

        ::=  {  statH323Entry  36  }

statH323MsgDRQRcv  OBJECT-TYPE
        SYNTAX  Counter32
        MAX-ACCESS      read-only
        STATUS  current


        DESCRIPTION
                "The total number of H323 DRQs received by the reporting 
		call agent"

        ::=  {  statH323Entry  37  }

statH323MsgDCFRcv  OBJECT-TYPE
        SYNTAX  Counter32
        MAX-ACCESS      read-only
        STATUS  current


        DESCRIPTION
                "The total number of H323 DCFs received by the reporting 
		call agent"

        ::=  {  statH323Entry  38  }

statH323MsgDRJRcv  OBJECT-TYPE
        SYNTAX  Counter32
        MAX-ACCESS      read-only
        STATUS  current


        DESCRIPTION
                "The total number of H323 DRJs received by the reporting 
		call agent"

        ::=  {  statH323Entry  39  }

statH323MsgURQRcv  OBJECT-TYPE
        SYNTAX  Counter32
        MAX-ACCESS      read-only
        STATUS  current


        DESCRIPTION
                "The total number of H323 URQs received by the reporting 
		call agent"

        ::=  {  statH323Entry  40  }

statH323MsgUCFRcv  OBJECT-TYPE
        SYNTAX  Counter32
        MAX-ACCESS      read-only
        STATUS  current


        DESCRIPTION
                "The total number of H323 UCFs received by the reporting 
		call agent"

        ::=  {  statH323Entry  41  }

statH323MsgURJRcv  OBJECT-TYPE
        SYNTAX  Counter32
        MAX-ACCESS      read-only
        STATUS  current


        DESCRIPTION
                "The total number of H323 URJs received by the reporting 
		call agent"

        ::=  {  statH323Entry  42  }

statH323MsgRIPRcv  OBJECT-TYPE
        SYNTAX  Counter32
        MAX-ACCESS      read-only
        STATUS  current


        DESCRIPTION
                "The total number of H323 RIPs received by the reporting 
		call agent"

        ::=  {  statH323Entry  43  }

statH323MsgRAIRcv  OBJECT-TYPE
        SYNTAX  Counter32
        MAX-ACCESS      read-only
        STATUS  current


        DESCRIPTION
                "The total number of H323 RAIs received by the reporting 
		call agent"

        ::=  {  statH323Entry  44  }

statH323MsgRACRcv  OBJECT-TYPE
        SYNTAX  Counter32
        MAX-ACCESS      read-only
        STATUS  current


        DESCRIPTION
                "The total number of H323 RACs received by the reporting 
		call agent"

        ::=  {  statH323Entry  45  }

statH323MsgSETUPXmit  OBJECT-TYPE
        SYNTAX  Counter32
        MAX-ACCESS      read-only
        STATUS  current


        DESCRIPTION
                "The total number of H323 SETUPs transmitted by the reporting 
		call agent"

        ::=  {  statH323Entry  46  }

statH323MsgCONNECTXmit  OBJECT-TYPE
        SYNTAX  Counter32
        MAX-ACCESS      read-only
        STATUS  current


        DESCRIPTION
                "The total number of H323 CONNECTs transmitted by the reporting 
		call agent"

        ::=  {  statH323Entry  47  }

statH323MsgALERTXmit  OBJECT-TYPE
        SYNTAX  Counter32
        MAX-ACCESS      read-only
        STATUS  current


        DESCRIPTION
                "The total number of H323 ALERTs transmitted by the reporting 
		call agent"

        ::=  {  statH323Entry  48  }

statH323MsgINPROGRESSXmit  OBJECT-TYPE
        SYNTAX  Counter32
        MAX-ACCESS      read-only
        STATUS  current


        DESCRIPTION
                "The total number of H323 IN PROGRESSs transmitted by the 
		reporting call agent"

        ::=  {  statH323Entry  49  }

statH323MsgCALLPROCEEDINGXmit  OBJECT-TYPE
        SYNTAX  Counter32
        MAX-ACCESS      read-only
        STATUS  current


        DESCRIPTION
                "The total number of H323 CALL PROCEEDINGs transmitted by the 
		reporting call agent"

        ::=  {  statH323Entry  50  }

statH323MsgNOTIFYXmit  OBJECT-TYPE
        SYNTAX  Counter32
        MAX-ACCESS      read-only
        STATUS  current


        DESCRIPTION
                "The total number of H323 NOTIFYs transmitted by the reporting 
		call agent"

        ::=  {  statH323Entry  51  }

statH323MsgINFOXmit  OBJECT-TYPE
        SYNTAX  Counter32
        MAX-ACCESS      read-only
        STATUS  current


        DESCRIPTION
                "The total number of H323 INFOs transmitted by the reporting 
		call agent"

        ::=  {  statH323Entry  52  }

statH323MsgUSERINFOXmit  OBJECT-TYPE
        SYNTAX  Counter32
        MAX-ACCESS      read-only
        STATUS  current


        DESCRIPTION
                "The total number of H323 USER INFOs transmitted by the 
		reporting call agent"

        ::=  {  statH323Entry  53  }

statH323MsgFACILITYXmit  OBJECT-TYPE
        SYNTAX  Counter32
        MAX-ACCESS      read-only
        STATUS  current


        DESCRIPTION
                "The total number of H323 FACILITYs transmitted by the 
		reporting call agent"

        ::=  {  statH323Entry  54  }

statH323MsgRELEASEXmit  OBJECT-TYPE
        SYNTAX  Counter32
        MAX-ACCESS      read-only
        STATUS  current


        DESCRIPTION
                "The total number of H323 RELEASEs transmitted by the 
		reporting call agent"

        ::=  {  statH323Entry  55  }

statH323MsgREJECTXmit  OBJECT-TYPE
        SYNTAX  Counter32
        MAX-ACCESS      read-only
        STATUS  current


        DESCRIPTION
                "The total number of H323 REJECTs transmitted by the reporting 
		call agent"

        ::=  {  statH323Entry  56  }

statH323MsgPASSTHROUXmit  OBJECT-TYPE
        SYNTAX  Counter32
        MAX-ACCESS      read-only
        STATUS  current


        DESCRIPTION
                "The total number of H323 PASS THROUGHs transmitted by the 
		reporting call agent"

        ::=  {  statH323Entry  57  }

statH323MsgSETUPRcv  OBJECT-TYPE
        SYNTAX  Counter32
        MAX-ACCESS      read-only
        STATUS  current


        DESCRIPTION
                "The total number of H323 SETUPs received by the reporting 
		call agent"

        ::=  {  statH323Entry  58  }

statH323MsgCONNECTRcv  OBJECT-TYPE
        SYNTAX  Counter32
        MAX-ACCESS      read-only
        STATUS  current


        DESCRIPTION
                "The total number of H323 CONNECTs received by the reporting 
		call agent"

        ::=  {  statH323Entry  59  }

statH323MsgALERTRcv  OBJECT-TYPE
        SYNTAX  Counter32
        MAX-ACCESS      read-only
        STATUS  current


        DESCRIPTION
                "The total number of H323 ALERTs received by the reporting 
		call agent"

        ::=  {  statH323Entry  60  }

statH323MsgINPROGRESSRcv  OBJECT-TYPE
        SYNTAX  Counter32
        MAX-ACCESS      read-only
        STATUS  current


        DESCRIPTION
                "The total number of H323 IN PROGRESSs received by the 
		reporting call agent"

        ::=  {  statH323Entry  61  }

statH323MsgCALLPROCEEDINGRcv  OBJECT-TYPE
        SYNTAX  Counter32
        MAX-ACCESS      read-only
        STATUS  current


        DESCRIPTION
                "The total number of H323 CALL PROCEEDINGs received by the 
		reporting call agent"

        ::=  {  statH323Entry  62  }

statH323MsgNOTIFYRcv  OBJECT-TYPE
        SYNTAX  Counter32
        MAX-ACCESS      read-only
        STATUS  current


        DESCRIPTION
                "The total number of H323 NOTIFYs received by the reporting 
		call agent"

        ::=  {  statH323Entry  63  }

statH323MsgINFORcv  OBJECT-TYPE
        SYNTAX  Counter32
        MAX-ACCESS      read-only
        STATUS  current


        DESCRIPTION
                "The total number of H323 INFOs received by the reporting 
		call agent"

        ::=  {  statH323Entry  64  }

statH323MsgUSERINFORcv  OBJECT-TYPE
        SYNTAX  Counter32
        MAX-ACCESS      read-only
        STATUS  current


        DESCRIPTION
                "The total number of H323 USER INFOs received by the reporting 
		call agent"

        ::=  {  statH323Entry  65  }

statH323MsgFACILITYRcv  OBJECT-TYPE
        SYNTAX  Counter32
        MAX-ACCESS      read-only
        STATUS  current


        DESCRIPTION
                "The total number of H323 FACILITYs received by the reporting 
		call agent"

        ::=  {  statH323Entry  66  }

statH323MsgRELEASERcv  OBJECT-TYPE
        SYNTAX  Counter32
        MAX-ACCESS      read-only
        STATUS  current


        DESCRIPTION
                "The total number of H323 RELEASEs received by the reporting 
		call agent"

        ::=  {  statH323Entry  67  }

statH323MsgREJECTRcv  OBJECT-TYPE
        SYNTAX  Counter32
        MAX-ACCESS      read-only
        STATUS  current


        DESCRIPTION
                "The total number of H323 REJECTs received by the reporting 
		call agent"

        ::=  {  statH323Entry  68  }

statH323MsgPASSTHROURcv  OBJECT-TYPE
        SYNTAX  Counter32
        MAX-ACCESS      read-only
        STATUS  current


        DESCRIPTION
                "The total number of H323 PASS THROUGHs received by the 
		reporting call agent"

        ::=  {  statH323Entry  69  }

statH323MsgSETUPFail  OBJECT-TYPE
        SYNTAX  Counter32
        MAX-ACCESS      read-only
        STATUS  current


        DESCRIPTION
                "The total number of H323 SETUPs that failed.  The failure is 
		due to one of the following scenarios:  unable to send due to 
		full socket queue, unable to compose message due to invalid 
		socket, or lack of available memory."

        ::=  {  statH323Entry  70  }

statH323MsgCONNECTFail  OBJECT-TYPE
        SYNTAX  Counter32
        MAX-ACCESS      read-only
        STATUS  current


        DESCRIPTION
                "TBD"

        ::=  {  statH323Entry  71  }

statH323MsgALERTFail  OBJECT-TYPE
        SYNTAX  Counter32
        MAX-ACCESS      read-only
        STATUS  current


        DESCRIPTION
                "The total number of H323 ALERTs that failed.  The 
		failure is due to one of the following scenarios:  unable 
		to send due to full socket queue, unable to compose message 
		due to invalid socket, or lack of available memory."

        ::=  {  statH323Entry  72  }

statH323MsgINPROGRESSFail  OBJECT-TYPE
        SYNTAX  Counter32
        MAX-ACCESS      read-only
        STATUS  current


        DESCRIPTION
                "The total number of H323 IN PROGRESSs that failed.  The 
		failure is due to one of the following scenarios:  unable to 
		send due to full socket queue, unable to compose message due 
		to invalid socket, or lack of available memory."

        ::=  {  statH323Entry  73  }

statH323MsgCALLPROCEEDINGFail  OBJECT-TYPE
        SYNTAX  Counter32
        MAX-ACCESS      read-only
        STATUS  current


        DESCRIPTION
                "The total number of H323 CALL PROCEEDINGs that failed.  The 
		failure is due to one of the following scenarios:  unable to 
		send due to full socket queue, unable to compose message due 
		to invalid socket, or lack of available memory."

        ::=  {  statH323Entry  74  }

statH323MsgNOTIFYFail  OBJECT-TYPE
        SYNTAX  Counter32
        MAX-ACCESS      read-only
        STATUS  current


        DESCRIPTION
                "The total number of H323 NOTIFYs that failed.  The failure 
		is due to one of the following scenarios:  unable to send due 
		to full socket queue, unable to compose message due to 
		invalid socket, or lack of available memory."

        ::=  {  statH323Entry  75  }

statH323MsgINFOFail  OBJECT-TYPE
        SYNTAX  Counter32
        MAX-ACCESS      read-only
        STATUS  current


        DESCRIPTION
                "The total number of H323 INFOs that failed.  The failure 
		is due to one of the following scenarios:  unable to send due 
		to full socket queue, unable to compose message due to 
		invalid socket, or lack of available memory."

        ::=  {  statH323Entry  76  }

statH323MsgUSERINFOFail  OBJECT-TYPE
        SYNTAX  Counter32
        MAX-ACCESS      read-only
        STATUS  current


        DESCRIPTION
                "The total number of H323 USER INFOs that failed.  The 
		failure is due to one of the following scenarios:  unable to 
		send due to full socket queue, unable to compose message 
		due to invalid socket, or lack of available memory."

        ::=  {  statH323Entry  77  }

statH323MsgFACILITYFail  OBJECT-TYPE
        SYNTAX  Counter32
        MAX-ACCESS      read-only
        STATUS  current


        DESCRIPTION
                "The total number of H323 FACILITYs that failed.  The failure 
		is due to one of the following scenarios:  unable to send 
		due to full socket queue, unable to compose message due to 
		invalid socket, or lack of available memory."

        ::=  {  statH323Entry  78  }

statH323MsgRELEASEFail  OBJECT-TYPE
        SYNTAX  Counter32
        MAX-ACCESS      read-only
        STATUS  current


        DESCRIPTION
                "The total number of H323 RELEASEs that failed.  The failure 
		is due to one of the following scenarios:  unable to send due 
		to full socket queue, unable to compose message due to 
		invalid socket, or lack of available memory."

        ::=  {  statH323Entry  79  }

statH323MsgREJECTFail  OBJECT-TYPE
        SYNTAX  Counter32
        MAX-ACCESS      read-only
        STATUS  current


        DESCRIPTION
                "The total number of H323 REJECTs that failed.  The failure 
		is due to one of the following scenarios:  unable to send 
		due to full socket queue, unable to compose message due to 
		invalid socket, or lack of available memory."

        ::=  {  statH323Entry  80  }

statH323MsgPASSTHROUFail  OBJECT-TYPE
        SYNTAX  Counter32
        MAX-ACCESS      read-only
        STATUS  current


        DESCRIPTION
                "The total number of H323 PASS THROUGHs that failed.  The 
		failure is due to one of the following scenarios:  unable to 
		send due to full socket queue, unable to compose message 
		due to invalid socket, or lack of available memory."

        ::=  {  statH323Entry  81  }


statISUPSGATable	OBJECT-TYPE
	SYNTAX	SEQUENCE  OF  StatISUPSGAEntry
	MAX-ACCESS	not-accessible
	STATUS	current
 	DESCRIPTION
		"ISDN User Part (SS7) signaling protocol related statistics - in a Signaling Gateway configuration."
	::=  { callAgentStatistics  16 }

statISUPSGAEntry	OBJECT-TYPE
	SYNTAX	StatISUPSGAEntry
	MAX-ACCESS	not-accessible
	STATUS	current
 	DESCRIPTION
		"Row description for ISDN User Part (SS7) signaling protocol related statistics Table - in a Signaling Gateway configuration."
	INDEX	{  statISUPSGAComponentID, statISUPSGATrkgrpId  }
	::=  { statISUPSGATable 1 }

StatISUPSGAEntry  ::=  SEQUENCE {
	statISUPSGAComponentID  DisplayString,
	statISUPSGADOW  DayOfWeek,
	statISUPSGATOD  TimeOfDay,
	statISUPSGATrkgrpId  DisplayString,
	statISUPSGAMsgTx		Counter32,
	statISUPSGAMsgRx		Counter32,
	statISUPSGAAcmTx		Counter32,
	statISUPSGAAcmRx		Counter32,
	statISUPSGAAnmTx		Counter32,
	statISUPSGAAnmRx		Counter32,
	statISUPSGABloTx		Counter32,
	statISUPSGABloRx		Counter32,
	statISUPSGABlaTx		Counter32,
	statISUPSGABlaRx		Counter32,
	statISUPSGACcrTx		Counter32,
	statISUPSGACcrRx		Counter32,
	statISUPSGACfnTx		Counter32,
	statISUPSGACfnRx		Counter32,
	statISUPSGACpgTx		Counter32,
	statISUPSGACpgRx		Counter32,
	statISUPSGACgbTx		Counter32,
	statISUPSGACgbRx		Counter32,
	statISUPSGACguTx		Counter32,
	statISUPSGACguRx		Counter32,
	statISUPSGACgbaTx		Counter32,
	statISUPSGACgbaRx		Counter32,
	statISUPSGACguaTx		Counter32,
	statISUPSGACguaRx		Counter32,
	statISUPSGACotTx		Counter32,
	statISUPSGACotRx		Counter32,
	statISUPSGACqmTx		Counter32,
	statISUPSGACqmRx		Counter32,
	statISUPSGACqrTx		Counter32,
	statISUPSGACqrRx		Counter32,
	statISUPSGACraTx		Counter32,
	statISUPSGACraRx		Counter32,
	statISUPSGACrmTx		Counter32,
	statISUPSGACrmRx		Counter32,
	statISUPSGACvrTx		Counter32,
	statISUPSGACvrRx		Counter32,
	statISUPSGACvtTx		Counter32,
	statISUPSGACvtRx		Counter32,
	statISUPSGAExmTx		Counter32,
	statISUPSGAExmRx		Counter32,
	statISUPSGAFacTx		Counter32,
	statISUPSGAFacRx		Counter32,
	statISUPSGAFotTx		Counter32,
	statISUPSGAFotRx		Counter32,
	statISUPSGAGrsTx		Counter32,
	statISUPSGAGrsRx		Counter32,
	statISUPSGAGraTx		Counter32,
	statISUPSGAGraRx		Counter32,
	statISUPSGAIamTx		Counter32,
	statISUPSGAIamRx		Counter32,
	statISUPSGAInfTx		Counter32,
	statISUPSGAInfRx		Counter32,
	statISUPSGAInrTx		Counter32,
	statISUPSGAInrRx		Counter32,
	statISUPSGALpaTx		Counter32,
	statISUPSGALpaRx		Counter32,
	statISUPSGAPamTx		Counter32,
	statISUPSGAPamRx		Counter32,
	statISUPSGARelTx		Counter32,
	statISUPSGARelRx		Counter32,
	statISUPSGARlcTx		Counter32,
	statISUPSGARlcRx		Counter32,
	statISUPSGARscTx		Counter32,
	statISUPSGARscRx		Counter32,
	statISUPSGAResTx		Counter32,
	statISUPSGAResRx		Counter32,
	statISUPSGASusTx		Counter32,
	statISUPSGASusRx		Counter32,
	statISUPSGAUblTx		Counter32,
	statISUPSGAUblRx		Counter32,
	statISUPSGAUbaTx		Counter32,
	statISUPSGAUbaRx		Counter32,
	statISUPSGAUcicTx		Counter32,
	statISUPSGAUcicRx		Counter32,
	statISUPSGAUsrTx		Counter32,
	statISUPSGAUsrRx		Counter32,
	statISUPSGAAbnormalRelRx		Counter32,
	statISUPSGAUnexpectMsgRx		Counter32,
	statISUPSGAUnrecogMsgRx		Counter32
	}
statISUPSGAComponentID	OBJECT-TYPE 
	SYNTAX	DisplayString 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"ISUP SGA Component Identifier"
	
	::=  {  statISUPSGAEntry  1  }

statISUPSGADOW	OBJECT-TYPE 
	SYNTAX	DayOfWeek 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"Day of week statistics was collected."
	
	::=  {  statISUPSGAEntry  2  }

statISUPSGATOD	OBJECT-TYPE 
	SYNTAX	TimeOfDay 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"Time of day statistics was collected in XX minutes interval"
	
	::=  {  statISUPSGAEntry  3  }

statISUPSGATrkgrpId	OBJECT-TYPE 
	SYNTAX	DisplayString 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"TrkGrp Identifier"
	
	::=  {  statISUPSGAEntry  4  }

statISUPSGAMsgTx	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of messages sent on the reporting call agent"

	::=  {  statISUPSGAEntry  5  }

statISUPSGAMsgRx	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of messages received on the reporting call agent"

	::=  {  statISUPSGAEntry  6  }

statISUPSGAAcmTx	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of ACM messages sent on the reporting call agent"

	::=  {  statISUPSGAEntry  7  }

statISUPSGAAcmRx	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of ACM messages received on the reporting call agent"

	::=  {  statISUPSGAEntry  8  }

statISUPSGAAnmTx	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of ANM messages sent on the reporting call agent"

	::=  {  statISUPSGAEntry  9  }

statISUPSGAAnmRx	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of ANM messages received on the reporting call agent"

	::=  {  statISUPSGAEntry  10  }

statISUPSGABloTx	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of BLO messages sent on the reporting call agent"

	::=  {  statISUPSGAEntry  11  }

statISUPSGABloRx	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of BLO messages received on the reporting call agent"

	::=  {  statISUPSGAEntry  12  }

statISUPSGABlaTx	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of BLA messages sent on the reporting call agent"

	::=  {  statISUPSGAEntry  13  }

statISUPSGABlaRx	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of BLA messages received on the reporting call agent"

	::=  {  statISUPSGAEntry  14  }

statISUPSGACcrTx	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of CCR messages sent on the reporting call agent"

	::=  {  statISUPSGAEntry  15  }

statISUPSGACcrRx	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of CCR messages received on the reporting call agent"

	::=  {  statISUPSGAEntry  16  }

statISUPSGACfnTx	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of CFN messages sent on the reporting call agent"

	::=  {  statISUPSGAEntry  17  }

statISUPSGACfnRx	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of CFN messages received on the reporting call agent"

	::=  {  statISUPSGAEntry  18  }

statISUPSGACpgTx	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of CPG messages sent on the reporting call agent"

	::=  {  statISUPSGAEntry  19  }

statISUPSGACpgRx	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of CPG messages received on the reporting call agent"

	::=  {  statISUPSGAEntry  20  }

statISUPSGACgbTx	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of CGB messages sent on the reporting call agent"

	::=  {  statISUPSGAEntry  21  }

statISUPSGACgbRx	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of CGB messages received on the reporting call agent"

	::=  {  statISUPSGAEntry  22  }

statISUPSGACguTx	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of CGU messages sent on the reporting call agent"

	::=  {  statISUPSGAEntry  23  }

statISUPSGACguRx	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of CGU messages received on the reporting call agent"

	::=  {  statISUPSGAEntry  24  }

statISUPSGACgbaTx	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of CGBA messages sent on the reporting call agent"

	::=  {  statISUPSGAEntry  25  }

statISUPSGACgbaRx	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of CGBA messages received on the reporting call agent"

	::=  {  statISUPSGAEntry  26  }

statISUPSGACguaTx	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of CGUA messages sent on the reporting call agent"

	::=  {  statISUPSGAEntry  27  }

statISUPSGACguaRx	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of CGUA messages received on the reporting call agent"

	::=  {  statISUPSGAEntry  28  }

statISUPSGACotTx	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of COT messages sent on the reporting call agent"

	::=  {  statISUPSGAEntry  29  }

statISUPSGACotRx	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of COT messages received on the reporting call agent"

	::=  {  statISUPSGAEntry  30  }

statISUPSGACqmTx	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of CQM messages sent on the reporting call agent"

	::=  {  statISUPSGAEntry  31  }

statISUPSGACqmRx	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of CQM messages received on the reporting call agent"

	::=  {  statISUPSGAEntry  32  }

statISUPSGACqrTx	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of CQR messages sent on the reporting call agent"

	::=  {  statISUPSGAEntry  33  }

statISUPSGACqrRx	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of CQR messages received on the reporting call agent"

	::=  {  statISUPSGAEntry  34  }

statISUPSGACraTx	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of CRA messages sent on the reporting call agent"

	::=  {  statISUPSGAEntry  35  }

statISUPSGACraRx	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of CRA messages received on the reporting call agent"

	::=  {  statISUPSGAEntry  36  }

statISUPSGACrmTx	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of CRM messages sent on the reporting call agent"

	::=  {  statISUPSGAEntry  37  }

statISUPSGACrmRx	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of CRM messages received on the reporting call agent"

	::=  {  statISUPSGAEntry  38  }

statISUPSGACvrTx	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of CVR messages sent on the reporting call agent"

	::=  {  statISUPSGAEntry  39  }

statISUPSGACvrRx	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of CVR messages received on the reporting call agent"

	::=  {  statISUPSGAEntry  40  }

statISUPSGACvtTx	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of CVT messages sent on the reporting call agent"

	::=  {  statISUPSGAEntry  41  }

statISUPSGACvtRx	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of CVT messages received on the reporting call agent"

	::=  {  statISUPSGAEntry  42  }

statISUPSGAExmTx	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of EXM messages sent on the reporting call agent"

	::=  {  statISUPSGAEntry  43  }

statISUPSGAExmRx	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of EXM messages received on the reporting call agent"

	::=  {  statISUPSGAEntry  44  }

statISUPSGAFacTx	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of FAC messages sent on the reporting call agent"

	::=  {  statISUPSGAEntry  45  }

statISUPSGAFacRx	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of FAC messages received on the reporting call agent"

	::=  {  statISUPSGAEntry  46  }

statISUPSGAFotTx	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of FOT messages sent on the reporting call agent"

	::=  {  statISUPSGAEntry  47  }

statISUPSGAFotRx	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of FOT messages received on the reporting call agent"

	::=  {  statISUPSGAEntry  48  }

statISUPSGAGrsTx	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of GRS messages sent on the reporting call agent"

	::=  {  statISUPSGAEntry  49  }

statISUPSGAGrsRx	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of GRS messages received on the reporting call agent"

	::=  {  statISUPSGAEntry  50  }

statISUPSGAGraTx	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of GRA messages sent on the reporting call agent"

	::=  {  statISUPSGAEntry  51  }

statISUPSGAGraRx	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of GRA messages received on the reporting call agent"

	::=  {  statISUPSGAEntry  52  }

statISUPSGAIamTx	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of IAM messages sent on the reporting call agent"

	::=  {  statISUPSGAEntry  53  }

statISUPSGAIamRx	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of IAM messages received on the reporting call agent"

	::=  {  statISUPSGAEntry  54  }

statISUPSGAInfTx	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of INF messages sent on the reporting call agent"

	::=  {  statISUPSGAEntry  55  }

statISUPSGAInfRx	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of INF messages received on the reporting call agent"

	::=  {  statISUPSGAEntry  56  }

statISUPSGAInrTx	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of INR messages sent on the reporting call agent"

	::=  {  statISUPSGAEntry  57  }

statISUPSGAInrRx	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of INR messages received on the reporting call agent"

	::=  {  statISUPSGAEntry  58  }

statISUPSGALpaTx	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of LPA messages sent on the reporting call agent"

	::=  {  statISUPSGAEntry  59  }

statISUPSGALpaRx	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of LPA messages received on the reporting call agent"

	::=  {  statISUPSGAEntry  60  }

statISUPSGAPamTx	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of PAM messages sent on the reporting call agent"

	::=  {  statISUPSGAEntry  61  }

statISUPSGAPamRx	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of PAM messages received on the reporting call agent"

	::=  {  statISUPSGAEntry  62  }

statISUPSGARelTx	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of REL messages sent on the reporting call agent"

	::=  {  statISUPSGAEntry  63  }

statISUPSGARelRx	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of REL messages received on the reporting call agent"

	::=  {  statISUPSGAEntry  64  }

statISUPSGARlcTx	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of RLC messages sent on the reporting call agent"

	::=  {  statISUPSGAEntry  65  }

statISUPSGARlcRx	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of RLC messages received on the reporting call agent"

	::=  {  statISUPSGAEntry  66  }

statISUPSGARscTx	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of RSC messages sent on the reporting call agent"

	::=  {  statISUPSGAEntry  67  }

statISUPSGARscRx	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of RSC messages received on the reporting call agent"

	::=  {  statISUPSGAEntry  68  }

statISUPSGAResTx	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of RES messages sent on the reporting call agent"

	::=  {  statISUPSGAEntry  69  }

statISUPSGAResRx	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of RES messages received on the reporting call agent"

	::=  {  statISUPSGAEntry  70  }

statISUPSGASusTx	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of SUS messages sent on the reporting call agent"

	::=  {  statISUPSGAEntry  71  }

statISUPSGASusRx	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of SUS messages received on the reporting call agent"

	::=  {  statISUPSGAEntry  72  }

statISUPSGAUblTx	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of UBL messages sent on the reporting call agent"

	::=  {  statISUPSGAEntry  73  }

statISUPSGAUblRx	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of UBL messages received on the reporting call agent"

	::=  {  statISUPSGAEntry  74  }

statISUPSGAUbaTx	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of UBA messages sent on the reporting call agent"

	::=  {  statISUPSGAEntry  75  }

statISUPSGAUbaRx	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of UBA messages received on the reporting call agent"

	::=  {  statISUPSGAEntry  76  }

statISUPSGAUcicTx	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of UCIC messages sent on the reporting call agent"

	::=  {  statISUPSGAEntry  77  }

statISUPSGAUcicRx	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of UCIC messages received on the reporting call agent"

	::=  {  statISUPSGAEntry  78  }

statISUPSGAUsrTx	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of USR messages sent on the reporting call agent"

	::=  {  statISUPSGAEntry  79  }

statISUPSGAUsrRx	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of USR messages received on the reporting call agent"

	::=  {  statISUPSGAEntry  80  }

statISUPSGAAbnormalRelRx	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of RELs received with ac cause other than NORMAL on the reporting call agent"

	::=  {  statISUPSGAEntry  81  }

statISUPSGAUnexpectMsgRx	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of unexpected messages received on the reporting call agent"

	::=  {  statISUPSGAEntry  82  }

statISUPSGAUnrecogMsgRx	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of unrecognized messages received on the reporting call agent"

	::=  {  statISUPSGAEntry  83  }

statDQOSTable	OBJECT-TYPE
	SYNTAX	SEQUENCE  OF  StatDQOSEntry
	MAX-ACCESS	not-accessible
	STATUS	current
 	DESCRIPTION
		"Dynamic Quality of Service related statistics."
	::=  { callAgentStatistics  17 }

statDQOSEntry	OBJECT-TYPE
	SYNTAX	StatDQOSEntry
	MAX-ACCESS	not-accessible
	STATUS	current
 	DESCRIPTION
		"Row description for Dynamic Quality of Service related statistics Table."
	INDEX	{  statDQOSComponentID, statDQOSAggrId  }
	::=  { statDQOSTable 1 }

StatDQOSEntry  ::=  SEQUENCE {
	statDQOSComponentID  DisplayString,
	statDQOSDOW  DayOfWeek,
	statDQOSTOD  TimeOfDay,
	statDQOSAggrId     DisplayString,
	statDQOSGatesetAttmp		Counter32,
	statDQOSGatesetSucc		Counter32,
	statDQOSGateCommit		Counter32
	}
statDQOSComponentID	OBJECT-TYPE 
	SYNTAX	DisplayString 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"DQOS Component Identifier"
	
	::=  {  statDQOSEntry  1  }

statDQOSDOW	OBJECT-TYPE 
	SYNTAX	DayOfWeek 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"Day of week statistics was collected."
	
	::=  {  statDQOSEntry  2  }

statDQOSTOD	OBJECT-TYPE 
	SYNTAX	TimeOfDay 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"Time of day statistics was collected in XX minutes interval"
	
	::=  {  statDQOSEntry  3  }

statDQOSAggrId	OBJECT-TYPE 
	SYNTAX	DisplayString 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"AGGR Identifier"
	
	::=  {  statDQOSEntry  4  }

statDQOSGatesetAttmp	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The number of DQOS gate set attempts of all types on the reporting call agent."

	::=  {  statDQOSEntry  5  }

statDQOSGatesetSucc	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The number of successful DQOS gate set attempts of all types on the reporting call agent."

	::=  {  statDQOSEntry  6  }

statDQOSGateCommit	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The number of successfully committed  DQOS gates of all types on the reporting call agent."

	::=  {  statDQOSEntry  7  }

statCallToolsTable	OBJECT-TYPE
	SYNTAX	SEQUENCE  OF  StatCallToolsEntry
	MAX-ACCESS	not-accessible
	STATUS	current
 	DESCRIPTION
		"Metrics related to invocations of the Translation Verification Tools."
	::=  { callAgentStatistics  18 }

statCallToolsEntry	OBJECT-TYPE
	SYNTAX	StatCallToolsEntry
	MAX-ACCESS	not-accessible
	STATUS	current
 	DESCRIPTION
		"Row description for metrics related to invocations of the Translation 
		Verification Tools related statistics Table."
	INDEX	{  statCallToolsComponentID  }
	::=  { statCallToolsTable 1 }

StatCallToolsEntry  ::=  SEQUENCE {
	statCallToolsComponentID  DisplayString,
	statCallToolsDOW  DayOfWeek,
	statCallToolsTOD  TimeOfDay,
	statCallToolsTrunkTransAttmp		Counter32,
	statCallToolsTrunkTransSucc		Counter32,
	statCallToolsLineTransAttmp		Counter32,
	statCallToolsLineTransSucc		Counter32
	}
statCallToolsComponentID	OBJECT-TYPE 
	SYNTAX	DisplayString 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"Call Tools Component Identifier"
	
	::=  {  statCallToolsEntry  1  }

statCallToolsDOW	OBJECT-TYPE 
	SYNTAX	DayOfWeek 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"Day of week statistics was collected."
	
	::=  {  statCallToolsEntry  2  }

statCallToolsTOD	OBJECT-TYPE 
	SYNTAX	TimeOfDay 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"Time of day statistics was collected in XX minutes interval"
	
	::=  {  statCallToolsEntry  3  }

statCallToolsTrunkTransAttmp	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of times the TVT process on the reporting call 
		agent received a request to perform a trunk based translation."

	::=  {  statCallToolsEntry  4  }

statCallToolsTrunkTransSucc	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of times the TVT process on the reporting call 
		agent received a request to perform a trunk based translation and 
		completed it successfully."

	::=  {  statCallToolsEntry  5  }

statCallToolsLineTransSucc	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of times the TVT process on the reporting call 
		agent received a request to perform a line based translation."

	::=  {  statCallToolsEntry  6  }

statCallToolsLineTransAttmp	OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current


	DESCRIPTION
		"The total number of times the TVT process on the reporting call 
		agent received a request to perform a line based translation and 
		completed it successfully."

	::=  {  statCallToolsEntry  7  }

statBillingTable	OBJECT-TYPE
	SYNTAX	SEQUENCE  OF  StatBillingEntry
	MAX-ACCESS	not-accessible
	STATUS	current
 	DESCRIPTION
		"Billing Statistics."
	::=  { emsStatistics  4 }

statBillingEntry	OBJECT-TYPE
	SYNTAX	StatBillingEntry
	MAX-ACCESS	not-accessible
	STATUS	current
 	DESCRIPTION
		"Row description for Billing Statistics Table."
	INDEX	{  statBillingComponentID  }
	::=  { statBillingTable 1 }

StatBillingEntry  ::=  SEQUENCE {
	statBillingComponentID  DisplayString,
	statBillingDOW  DayOfWeek,
	statBillingTOD  TimeOfDay,
	statBillingTestCalls  Counter32, 
	statBillingIntlCalls  Counter32,
	statBillingLocalCalls  Counter32,
	statBillingTollCalls  Counter32,
	statBillingInterlataCalls  Counter32,
	statBillingTandemCalls  Counter32,
	statBillingEmergencyCalls  Counter32,
	statBillingNonEmergencyCalls  Counter32,
	statBillingDirAssistCalls  Counter32,
	statBillingDirAssistTollCalls  Counter32,
	statBillingRepairCalls  Counter32,
	statBillingRelayCalls  Counter32,
	statBillingBusinessCalls  Counter32,
	statBillingTollfreeCalls  Counter32,
	statBilling900Calls  Counter32,
	statBillingPCSCalls  Counter32,
	statBillingVacantCalls  Counter32,
	statBillingInvalidCalls  Counter32,
	statBilling500Calls  Counter32,
	statBilling700Calls  Counter32,
	statBilling976Calls  Counter32,
	statBillingUndefinedCalls  Counter32,
	statBillingLRNCalls  Counter32,
	statBillingExtensionCalls  Counter32,
	statBillingCutThruCalls  Counter32,
	statBillingCallTypeOper  Counter32,
	statBillingCallTypeCarrOper  Counter32,
	statBillingCallTypeOperAssist  Counter32,
	statBillingCallTypeBlv  Counter32,
	statBillingCallTypeSpeedDial  Counter32,
	statBillingCallTypeNational  Counter32,
	statBillingCallTypeTW  Counter32,
	statBillingCallTypeInfo  Counter32,
	statBillingCallTypePremium  Counter32,
	statBillingCallTypeAttendant  Counter32,
	statBillingCallTypeNAS  Counter32,
	statBillingCallTypePolice  Counter32,
	statBillingCallTypeFire  Counter32,
	statBillingCallTypeAmbulance  Counter32,
	statBillingCallTypeTime  Counter32,
	statBillingCallTypeTraffic  Counter32,
	statBillingEMAcked  Counter32,
	statBillingEMLogged  Counter32,
	statBillingEMRetrans  Counter32,
	statBillingCallTypeWeather  Counter32
	}
statBillingComponentID	OBJECT-TYPE 
	SYNTAX	DisplayString 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"Billing Component Identifier"
	
	::=  {  statBillingEntry  1  }

statBillingDOW	OBJECT-TYPE 
	SYNTAX	DayOfWeek 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"Day of week statistics was collected."
	
	::=  {  statBillingEntry  2  }

statBillingTOD	OBJECT-TYPE 
	SYNTAX	TimeOfDay 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"Time of day statistics was collected in XX minutes interval"
	
	::=  {  statBillingEntry  3  }

statBillingTestCalls  OBJECT-TYPE
        SYNTAX  Counter32
        MAX-ACCESS      read-only
        STATUS  current


        DESCRIPTION
                "The number call detail block of type test call created by the 
		reporting element management system"

        ::=  {  statBillingEntry  4  }

statBillingIntlCalls  OBJECT-TYPE
        SYNTAX  Counter32
        MAX-ACCESS      read-only
        STATUS  current


        DESCRIPTION
                "The number call detail block of type international created by 
		the reporting element management system"

        ::=  {  statBillingEntry  5  }

statBillingLocalCalls  OBJECT-TYPE
        SYNTAX  Counter32
        MAX-ACCESS      read-only
        STATUS  current


        DESCRIPTION
                "The number call detail block of type local created by the 
		reporting element management system"

        ::=  {  statBillingEntry  6  }

statBillingTollCalls  OBJECT-TYPE
        SYNTAX  Counter32
        MAX-ACCESS      read-only
        STATUS  current


        DESCRIPTION
                "The number call detail block of type toll created by the 
		reporting element management system"

        ::=  {  statBillingEntry  7  }

statBillingInterlataCalls  OBJECT-TYPE
        SYNTAX  Counter32
        MAX-ACCESS      read-only
        STATUS  current


        DESCRIPTION
                "The number call detail block of type interlata created by the 
		reporting element management system"

        ::=  {  statBillingEntry  8  }


statBillingTandemCalls  OBJECT-TYPE
        SYNTAX  Counter32
        MAX-ACCESS      read-only
        STATUS  current


        DESCRIPTION
                "The number call detail block of type tandem created by the 
		reporting element management system"

        ::=  {  statBillingEntry  9  }

statBillingEmergencyCalls  OBJECT-TYPE
        SYNTAX  Counter32
        MAX-ACCESS      read-only
        STATUS  current


        DESCRIPTION
                "The number call detail block of type emergency created by the 
		reporting element management system"

        ::=  {  statBillingEntry  10  }

statBillingNonEmergencyCalls  OBJECT-TYPE
        SYNTAX  Counter32
        MAX-ACCESS      read-only
        STATUS  current


        DESCRIPTION
                "The number call detail block of type non-emergency created by 
		the reporting element management system"

        ::=  {  statBillingEntry  11  }

statBillingDirAssistCalls  OBJECT-TYPE
        SYNTAX  Counter32
        MAX-ACCESS      read-only
        STATUS  current


        DESCRIPTION
                "The number call detail block of type directory assistance 
		created by the reporting element management system"

        ::=  {  statBillingEntry  12  }

statBillingDirAssistTollCalls  OBJECT-TYPE
        SYNTAX  Counter32
        MAX-ACCESS      read-only
        STATUS  current


        DESCRIPTION
                "The number call detail block of type directory assistance 
		toll created by the reporting element management system"

        ::=  {  statBillingEntry  13  }

statBillingRepairCalls  OBJECT-TYPE
        SYNTAX  Counter32
        MAX-ACCESS      read-only
        STATUS  current


        DESCRIPTION
                "The number call detail block of type repair created by the 
		reporting element management system"

        ::=  {  statBillingEntry  14  }


statBillingRelayCalls  OBJECT-TYPE
        SYNTAX  Counter32
        MAX-ACCESS      read-only
        STATUS  current


        DESCRIPTION
                "The number call detail block of type relay created by the 
		reporting element management system"

        ::=  {  statBillingEntry  15  }


statBillingBusinessCalls  OBJECT-TYPE
        SYNTAX  Counter32
        MAX-ACCESS      read-only
        STATUS  current


        DESCRIPTION
                "The number call detail block of type business created by the 
		reporting element management system"

        ::=  {  statBillingEntry  16  }


statBillingTollfreeCalls  OBJECT-TYPE
        SYNTAX  Counter32
        MAX-ACCESS      read-only
        STATUS  current


        DESCRIPTION
                "The number call detail block of type toll free created by the 
		reporting element management system"

        ::=  {  statBillingEntry  17  }


statBilling900Calls  OBJECT-TYPE
        SYNTAX  Counter32
        MAX-ACCESS      read-only
        STATUS  current


        DESCRIPTION
                "The number call detail block of type 900 created by the 
		reporting element management system"

        ::=  {  statBillingEntry  18  }

statBillingPCSCalls  OBJECT-TYPE
        SYNTAX  Counter32
        MAX-ACCESS      read-only
        STATUS  current


        DESCRIPTION
                "The number call detail block of type pcs created by the 
		reporting element management system"

        ::=  {  statBillingEntry  19  }

statBillingVacantCalls  OBJECT-TYPE
        SYNTAX  Counter32
        MAX-ACCESS      read-only
        STATUS  current


        DESCRIPTION
                "The number call detail block of type vacant created by the 
		reporting element management system"

        ::=  {  statBillingEntry  20  }

statBillingInvalidCalls	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number call detail block of type invalid created by the 
		reporting element management system"
	
	::=  {  statBillingEntry  21  }

statBilling500Calls	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number call detail block of type 500 created by the 
		reporting element management system"
	
	::=  {  statBillingEntry  22  }

statBilling700Calls	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number call detail block of type 700 created by the 
		reporting element management system"
	
	::=  {  statBillingEntry  23  }

statBilling976Calls	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number call detail block of type 976 created by the 
		reporting element management system"
	
	::=  {  statBillingEntry  24  }

statBillingUndefinedCalls	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number call detail block of type none created by the 
		reporting element management system"
	
	::=  {  statBillingEntry  25  }

statBillingLRNCalls	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number call detail block of type lrn created by the 
		reporting element management system"
	
	::=  {  statBillingEntry  26 }

statBillingExtensionCalls	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number call detail block of type extension created by the 
		reporting element management system"
	
	::=  {  statBillingEntry  27 }

statBillingCutThruCalls	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number call detail block of type cut thru created by the 
		reporting element management system"
	
	::=  {  statBillingEntry  28  }

statBillingCallTypeOper	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number call detail block of type cut operator created by 
		the reporting element management system"
	
	::=  {  statBillingEntry  29  }

statBillingCallTypeCarrOper	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number call detail block of type carrier operator created 
		by the reporting element management system"
	
	::=  {  statBillingEntry  30  }

statBillingCallTypeOperAssist	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number call detail block of type operator assisted 
		created by the reporting element management system"
	
	::=  {  statBillingEntry  31  }

statBillingCallTypeBlv	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number call detail block of type busy line verification 
		created by the reporting element management system"
	
	::=  {  statBillingEntry  32  }

statBillingCallTypeSpeedDial	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number call detail block of type speed dial created by 
		the reporting element management system"
	
	::=  {  statBillingEntry  33  }

statBillingCallTypeNational	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number call detail block of type national (NANP) created 
		by the reporting element management system"
	
	::=  {  statBillingEntry  34  }

statBillingCallTypeTW	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number call detail block of type time and weather created 
		by the reporting element management system"
	
	::=  {  statBillingEntry  35  }

statBillingCallTypeInfo	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number call detail block of type information (i.e. 976 
		calls) created by the reporting element management system"
	
	::=  {  statBillingEntry  36  }

statBillingCallTypePremium	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number call detail block of type premium (i.e. 900 
		calls) created by the reporting element management system"
	
	::=  {  statBillingEntry  37  }

statBillingCallTypeAttendant	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number call detail block of type attendant created by the 
		reporting element management system"
	
	::=  {  statBillingEntry  38  }

statBillingCallTypeNAS	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number call detail block of type nascreated by the 
		reporting element management system"
	
	::=  {  statBillingEntry  39  }

statBillingCallTypePolice	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number call detail block of type police created by the 
		reporting element management system"
	
	::=  {  statBillingEntry  40  }

statBillingCallTypeFire	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number call detail block of type fire created by the 
		reporting element management system"
	
	::=  {  statBillingEntry  41  }

statBillingCallTypeAmbulance	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number call detail block of type ambulance created by the 
		reporting element management system"
	
	::=  {  statBillingEntry  42  }

statBillingCallTypeTime	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number call detail block of type time created by the 
		reporting element management system"
	
	::=  {  statBillingEntry  43  }

statBillingCallTypeTraffic	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number call detail block of type traffic created by the 
		reporting element management system"
	
	::=  {  statBillingEntry  44  }

statBillingEMAcked	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	obsolete
 
	
	DESCRIPTION
		"EM Acked"
	
	::=  {  statBillingEntry  45  }

statBillingEMLogged	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	obsolete
 
	
	DESCRIPTION
		"EM Logged"
	
	::=  {  statBillingEntry  46  }

statBillingEMRetrans	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	obsolete
 
	
	DESCRIPTION
		"EM Retrans"
	
	::=  {  statBillingEntry  47  }

statBillingCallTypeWeather	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number call detail block of type weather created by the 
		reporting element management system"
	
	::=  {  statBillingEntry  48  }



statSNMPTable	OBJECT-TYPE
	SYNTAX	SEQUENCE  OF  StatSNMPEntry
	MAX-ACCESS	not-accessible
	STATUS	current
 	DESCRIPTION
		"SNMP Statistics ."
	::=  { emsStatistics  2 }

statSNMPEntry	OBJECT-TYPE
	SYNTAX	StatSNMPEntry
	MAX-ACCESS	not-accessible
	STATUS	current
 	DESCRIPTION
		"Row description for SNMP Statistics Table."
	INDEX	{  statSNMPComponentID  }
	::=  { statSNMPTable 1 }

StatSNMPEntry  ::=  SEQUENCE {
	statSNMPComponentID  DisplayString,
	statSNMPDOW  DayOfWeek,
	statSNMPTOD  TimeOfDay,
	statSNMPTrapsXmit  Counter32,
	statSNMPSetsRcv  Counter32,
	statSNMPSetsXmit  Counter32,
	statSNMPGetsRcv  Counter32,
	statSNMPGetsXmit  Counter32,
	statSNMPGetNextsRcv  Counter32,
	statSNMPGetNextsXmit  Counter32
	}
statSNMPComponentID	OBJECT-TYPE 
	SYNTAX	DisplayString 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"SNMP Component Identifier"
	
	::=  {  statSNMPEntry  1  }

statSNMPDOW	OBJECT-TYPE 
	SYNTAX	DayOfWeek 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"Day of week statistics was collected."
	
	::=  {  statSNMPEntry  3  }

statSNMPTOD	OBJECT-TYPE 
	SYNTAX	TimeOfDay 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"Time of day statistics was collected in XX minutes interval"
	
	::=  {  statSNMPEntry  4  }

statSNMPTrapsXmit	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The total number of SNMP TRAPs generated by the reporting 
		element management system"
	
	::=  {  statSNMPEntry  5  }

statSNMPSetsRcv	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The total number of SNMP SETs received by the reporting 
		element management system"
	
	::=  {  statSNMPEntry  6  }

statSNMPSetsXmit	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The total number of SNMP SETs transmitted by the reporting 
		element management system"
	
	::=  {  statSNMPEntry  7  }

statSNMPGetsRcv	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The total number of SNMP GETs received by the reporting 
		element management system"
	
	::=  {  statSNMPEntry  8  }

statSNMPGetsXmit	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The total number of SNMP GETs transmitted by the reporting 
		element management system"
	
	::=  {  statSNMPEntry  9  }

statSNMPGetNextsRcv	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The total number of SNMP GET NEXTs received by the reporting 
		element management system"
	
	::=  {  statSNMPEntry  10  }

statSNMPGetNextsXmit	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The total number of SNMP GET NEXTs transmitted by the 
		reporting element management system"
	
	::=  {  statSNMPEntry  11  }


statEMATable	OBJECT-TYPE
	SYNTAX	SEQUENCE  OF  StatEMAEntry
	MAX-ACCESS	not-accessible
	STATUS	current
 	DESCRIPTION
		"Event Messaging Billing related statistics."
	::=  { emsStatistics  5 }

statEMAEntry	OBJECT-TYPE
	SYNTAX	StatEMAEntry
	MAX-ACCESS	not-accessible
	STATUS	current
 	DESCRIPTION
		"Row description for Event Messaging Billing related statistics Table."
	INDEX	{  statEMAComponentID  }
	::=  { statEMATable 1 }

StatEMAEntry  ::=  SEQUENCE {
	statEMAComponentID  DisplayString,
	statEMADOW  DayOfWeek,
	statEMATOD  TimeOfDay,
	statEMABillingEMAcked  Counter32,
	statEMABillingEMLogged  Counter32,
	statEMABillingEMRetrans  Counter32
	}
statEMAComponentID	OBJECT-TYPE 
	SYNTAX	DisplayString 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"EMA Component Identifier"
	
	::=  {  statEMAEntry  1  }

statEMADOW	OBJECT-TYPE 
	SYNTAX	DayOfWeek 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"Day of week statistics was collected."
	
	::=  {  statEMAEntry  2  }

statEMATOD	OBJECT-TYPE 
	SYNTAX	TimeOfDay 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"Time of day statistics was collected in XX minutes interval"
	
	::=  {  statEMAEntry  3  }

statEMABillingEMAcked	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of event messages acknowledged by the Record 
		Keeping System."
	
	::=  {  statEMAEntry  4  }

statEMABillingEMLogged	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of event messages written to disk but not sent to 
		any RKS."
	
	::=  {  statEMAEntry  5  }

statEMABillingEMRetrans	OBJECT-TYPE 
	SYNTAX	Counter32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"The number of event messages that were retransmitted due to 
		a lack of acknowledgement by the Record Keeping System."
	
	::=  {  statEMAEntry  6  }


callAgentOAMPTable	OBJECT-TYPE
	SYNTAX	SEQUENCE  OF  CallAgentOAMPEntry
	MAX-ACCESS	not-accessible
	STATUS	current
 	DESCRIPTION
		"Call Agent Access for Control/Status"
	::=  { callAgentStatusControl  1 }

callAgentOAMPEntry	OBJECT-TYPE
	SYNTAX	CallAgentOAMPEntry
	MAX-ACCESS	not-accessible
	STATUS	current
 	DESCRIPTION
		"Row description for Call Agent access table"
	INDEX	{  callAgentOAMPID  }
	::=  { callAgentOAMPTable 1 }

CallAgentOAMPEntry  ::=  SEQUENCE {
	callAgentOAMPID  DisplayString1To64,
	callAgentOAMPPrimaryState  KAMState,
	callAgentOAMPSecondaryState  KAMState
	}
callAgentOAMPID	OBJECT-TYPE 
	SYNTAX	DisplayString1To64 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"Call Agent ID"
	
	::=  {  callAgentOAMPEntry  1  }

callAgentOAMPPrimaryState	OBJECT-TYPE 
	SYNTAX	KAMState 
	MAX-ACCESS	read-write 
	STATUS	current
 
	
	DESCRIPTION
		"Current State of Primary Call Agent"
	
	::=  {  callAgentOAMPEntry  2  }

callAgentOAMPSecondaryState	OBJECT-TYPE 
	SYNTAX	KAMState 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"Current State of Secondary Call Agent"
	
	::=  {  callAgentOAMPEntry  3  }


featureServerOAMPTable	OBJECT-TYPE
	SYNTAX	SEQUENCE  OF  FeatureServerOAMPEntry
	MAX-ACCESS	not-accessible
	STATUS	current
 	DESCRIPTION
		"Feature Server Access for Control/Status"
	::=  { featureServer  3 }

featureServerOAMPEntry	OBJECT-TYPE
	SYNTAX	FeatureServerOAMPEntry
	MAX-ACCESS	not-accessible
	STATUS	current
 	DESCRIPTION
		"Row description for Feature Server Access for Control/Status"
	INDEX	{  featureServerOAMPID }
	::=  { featureServerOAMPTable 1 }

FeatureServerOAMPEntry  ::=  SEQUENCE {
	featureServerOAMPID  DisplayString1To64,
	featureServerOAMPPrimaryState  KAMState,
	featureServerOAMPSecondaryState  KAMState
	}
featureServerOAMPID	OBJECT-TYPE 
	SYNTAX	DisplayString1To64 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"Feature Server ID"
	
	::=  {  featureServerOAMPEntry  1  }

featureServerOAMPPrimaryState	OBJECT-TYPE 
	SYNTAX	KAMState 
	MAX-ACCESS	read-write 
	STATUS	current
 
	
	DESCRIPTION
		"Current State of Primary Feature Server"
	
	::=  {  featureServerOAMPEntry  3  }

featureServerOAMPSecondaryState	OBJECT-TYPE 
	SYNTAX	KAMState 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"Current State of Secondary Feature Server"
	
	::=  {  featureServerOAMPEntry  4  }

mediaGatewayOAMPTable	OBJECT-TYPE
	SYNTAX	SEQUENCE  OF  MediaGatewayOAMPEntry
	MAX-ACCESS	not-accessible
	STATUS	current
 	DESCRIPTION
		"Media Gateway Access for Status/Control"
	::=  { callAgentStatusControl  2 }

mediaGatewayOAMPEntry	OBJECT-TYPE
	SYNTAX	MediaGatewayOAMPEntry
	MAX-ACCESS	not-accessible
	STATUS	current
 	DESCRIPTION
		"Row description for Media Gateway Status/Control Access Table"
	INDEX	{  mediaGatewayOAMPID  }
	::=  { mediaGatewayOAMPTable 1 }

MediaGatewayOAMPEntry  ::=  SEQUENCE {
	mediaGatewayOAMPID  DisplayString1To32,
	mediaGatewayOAMPAdminState  ADMAdminState,
	mediaGatewayOAMPOperState  MGWOperState,
	mediaGatewayOAMPTargetState  ADMTargetState,
	mediaGatewayOAMPMode  ADMMode,
	mediaGatewayControlState  ControlState
	}
mediaGatewayOAMPID	OBJECT-TYPE 
	SYNTAX	DisplayString1To32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"Media Gateway ID"
	
	::=  {  mediaGatewayOAMPEntry  1  }

mediaGatewayOAMPAdminState	OBJECT-TYPE 
	SYNTAX	ADMAdminState 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"Media Gateway Current State"
	
	::=  {  mediaGatewayOAMPEntry  2  }

mediaGatewayOAMPOperState	OBJECT-TYPE 
	SYNTAX	MGWOperState 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"Media Gateway Operational State"
	
	::=  {  mediaGatewayOAMPEntry  3  }

mediaGatewayOAMPTargetState	OBJECT-TYPE 
	SYNTAX	ADMTargetState 
	MAX-ACCESS	read-write 
	STATUS	current
 
	
	DESCRIPTION
		"Media Gateway Target State.  'not-set' if state is not set."
	
	DEFVAL	{1}

	::=  {  mediaGatewayOAMPEntry  4  }

mediaGatewayOAMPMode	OBJECT-TYPE 
	SYNTAX	ADMMode 
	MAX-ACCESS	read-write 
	STATUS	current
 
	
	DESCRIPTION
		"Media Gateway Mode of control.  'not-set' if state is not set"

	DEFVAL { 1 }
	
	::=  {  mediaGatewayOAMPEntry  5  }

mediaGatewayControlState	OBJECT-TYPE 
	SYNTAX	ControlState 
	MAX-ACCESS	read-write 
	STATUS	current
 
	
	DESCRIPTION
		"If the manager does a get, the 2 possible state will be return: insufficient-data is returned if target state column and/or mode of control column is not filled;  ready-to-commit is return if both target-state and mode of control columns are filled.
The manager can perform a set only with the commit state and the value that is immediately returned if successfull is committed.  If not successful, then insufficient data is returned or general error is returned."
	
	::=  {  mediaGatewayOAMPEntry  6  }


trunkGroupOAMPTable	OBJECT-TYPE
	SYNTAX	SEQUENCE  OF  TrunkGroupOAMPEntry
	MAX-ACCESS	not-accessible
	STATUS	current
 	DESCRIPTION
		"Trunk Group Access for OAMP"
	::=  { callAgentStatusControl  3 }

trunkGroupOAMPEntry	OBJECT-TYPE
	SYNTAX	TrunkGroupOAMPEntry
	MAX-ACCESS	not-accessible
	STATUS	current
 	DESCRIPTION
		"Row description for Trunk Group Table Access"
	INDEX	{  trunkGroupOAMPID, trunkGroupOAMPCallAgentID }
	::=  { trunkGroupOAMPTable 1 }

TrunkGroupOAMPEntry  ::=  SEQUENCE {
	trunkGroupOAMPID  Integer32,
	trunkGroupOAMPCallAgentID  DisplayString1To64,
	trunkGroupOAMPAdminState  ADMAdminState,
	trunkGroupOAMPOperState  TrunkGrpOperState,
	trunkGroupOAMPTargetState  ADMTargetState,
	trunkGroupOAMPMode  ADMMode,
	trunkGroupOAMPControlState  ControlState
	}
trunkGroupOAMPID	OBJECT-TYPE 
	SYNTAX	Integer32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"Trunk Group Number"
	
	::=  {  trunkGroupOAMPEntry  1  }

trunkGroupOAMPCallAgentID	OBJECT-TYPE 
	SYNTAX	DisplayString1To64 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"Call Agent ID"
	
	::=  {  trunkGroupOAMPEntry  2  }

trunkGroupOAMPAdminState	OBJECT-TYPE 
	SYNTAX	ADMAdminState 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"Trunk Group Admin State"
	
	::=  {  trunkGroupOAMPEntry  3  }

trunkGroupOAMPOperState	OBJECT-TYPE 
	SYNTAX	TrunkGrpOperState 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"Trunk Operational State"
	
	::=  {  trunkGroupOAMPEntry  4  }

trunkGroupOAMPTargetState	OBJECT-TYPE 
	SYNTAX	ADMTargetState 
	MAX-ACCESS	read-write 
	STATUS	current
 
	
	DESCRIPTION
		"Trunk Target State.  'not-set' if state is not set."
	
	DEFVAL	{1}

	::=  {  trunkGroupOAMPEntry  5  }

trunkGroupOAMPMode	OBJECT-TYPE 
	SYNTAX	ADMMode 
	MAX-ACCESS	read-write 
	STATUS	current
 
	
	DESCRIPTION
		"Trunk Target Mode of control.  'not-set' if state is not set."
	
	DEFVAL { 1 }
	
	::=  {  trunkGroupOAMPEntry  6  }

trunkGroupOAMPControlState	OBJECT-TYPE 
	SYNTAX	ControlState 
	MAX-ACCESS	read-write 
	STATUS	current
 
	
	DESCRIPTION
		"If the manager does a get, the 2 possible state will be return: insufficient-data is returned if target state column and/or mode of control column is not filled;  ready-to-commit is return if both target-state and mode of control columns are filled.
The manager can perform a set only with the commit state and the value that is immediately returned if successfull is committed.  If not successful, then insufficient data is returned or general error is returned."
	
	::=  {  trunkGroupOAMPEntry  7  }


subscrLineTermOAMPTable	OBJECT-TYPE
	SYNTAX	SEQUENCE  OF  SubscrLineTermOAMPEntry
	MAX-ACCESS	not-accessible
	STATUS	current
 	DESCRIPTION
		"Subscriber Line Termination Access of OAMP"
	::=  { callAgentStatusControl  8 }

subscrLineTermOAMPEntry	OBJECT-TYPE
	SYNTAX	SubscrLineTermOAMPEntry
	MAX-ACCESS	not-accessible
	STATUS	current
 	DESCRIPTION
		"Row description for Subscriber Line Termination Access Table"
	INDEX	{  subscrLineTermOAMPID  }
	::=  { subscrLineTermOAMPTable 1 }

SubscrLineTermOAMPEntry  ::=  SEQUENCE {
	subscrLineTermOAMPID  DisplayString,
	subscrLineTermOAMPAdminState  ADMAdminState,
	subscrLineTermOAMPOperState  TerminationOperState,
	subscrLineTermOAMPTargetState  ADMTargetState,
	subscrLineTermOAMPMode  ADMMode,
	subscrLineTermOAMPControlState  ControlState
	}
subscrLineTermOAMPID	OBJECT-TYPE 
	SYNTAX	DisplayString ( SIZE ( 1..30 ) )  
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"Subscriber Line Termination ID"
	
	::=  {  subscrLineTermOAMPEntry  1  }

subscrLineTermOAMPAdminState	OBJECT-TYPE 
	SYNTAX	ADMAdminState 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"Subscriber Line Termination Current State"
	
	::=  {  subscrLineTermOAMPEntry  2  }

subscrLineTermOAMPOperState	OBJECT-TYPE 
	SYNTAX	TerminationOperState 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"Subscriber Line Termination Operational State"
	
	::=  {  subscrLineTermOAMPEntry  3  }

subscrLineTermOAMPTargetState	OBJECT-TYPE 
	SYNTAX	ADMTargetState 
	MAX-ACCESS	read-write 
	STATUS	current
 
	
	DESCRIPTION
		"Subscriber Line Termination Target State.  'not-set' if state is not set."
	
	DEFVAL	{ 1 }

	::=  {  subscrLineTermOAMPEntry  4  }

subscrLineTermOAMPMode	OBJECT-TYPE 
	SYNTAX	ADMMode 
	MAX-ACCESS	read-write 
	STATUS	current
 
	
	DESCRIPTION
		"Subscriber Line Termination Mode of control.  'not-set' if state is not set."
	
	DEFVAL { 1 }
	
	::=  {  subscrLineTermOAMPEntry  5  }

subscrLineTermOAMPControlState	OBJECT-TYPE 
	SYNTAX	ControlState 
	MAX-ACCESS	read-write 
	STATUS	current
 
	
	DESCRIPTION
		"If the manager does a get, the 2 possible state will be return: insufficient-data is returned if target state column and/or mode of control column is not filled;  ready-to-commit is return if both target-state and mode of control columns are filled.
The manager can perform a set only with the commit state and the value that is immediately returned if successfull is committed.  If not successful, then insufficient data is returned or general error is returned."
	
	::=  {  subscrLineTermOAMPEntry  6  }


trunkTermOAMPTable	OBJECT-TYPE
	SYNTAX	SEQUENCE  OF  TrunkTermOAMPEntry
	MAX-ACCESS	not-accessible
	STATUS	current
 	DESCRIPTION
		"Trunk Termination Access for OAMP"
	::=  { callAgentStatusControl  9 }

trunkTermOAMPEntry	OBJECT-TYPE
	SYNTAX	TrunkTermOAMPEntry
	MAX-ACCESS	not-accessible
	STATUS	current
 	DESCRIPTION
		"Row description for Trunk Termination Access Table"
	INDEX	{  trunkTermOAMPTrunkGrpID, trunkTermOAMPCIC }
	::=  { trunkTermOAMPTable 1 }

TrunkTermOAMPEntry  ::=  SEQUENCE {
	trunkTermOAMPTrunkGrpID  Integer32,
	trunkTermOAMPCIC  INTEGER,
	trunkTermOAMPAdminState  ADMAdminState,
	trunkTermOAMPOperState  TerminationOperState,
	trunkTermOAMPStaticState  TrunkTermStaticState,
	trunkTermOAMPDynamicState  TrunkTermDynamicState,
	trunkTermOAMPTargetState  ADMTargetState,
	trunkTermOAMPMode  ADMMode,
	trunkTermOAMPControlState  ControlState
	}
trunkTermOAMPTrunkGrpID	OBJECT-TYPE 
	SYNTAX	Integer32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"Trunk Group ID"
	
	::=  {  trunkTermOAMPEntry  1  }

trunkTermOAMPCIC	OBJECT-TYPE 
	SYNTAX	INTEGER ( 1..65535 )  
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"Trunk CIC"
	
	::=  {  trunkTermOAMPEntry  2  }

trunkTermOAMPAdminState	OBJECT-TYPE 
	SYNTAX	ADMAdminState 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"Trunk Termination Admin State"
	
	::=  {  trunkTermOAMPEntry  3  }

trunkTermOAMPOperState	OBJECT-TYPE 
	SYNTAX	TerminationOperState 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"Trunk Termination Operational State"
	
	::=  {  trunkTermOAMPEntry  4  }

trunkTermOAMPStaticState	OBJECT-TYPE 
	SYNTAX	TrunkTermStaticState 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"Trunk Termination Static State"
	
	::=  {  trunkTermOAMPEntry  5  }

trunkTermOAMPDynamicState	OBJECT-TYPE 
	SYNTAX	TrunkTermDynamicState 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"Trunk Termination Dynamic State"
	
	::=  {  trunkTermOAMPEntry  6  }

trunkTermOAMPTargetState	OBJECT-TYPE 
	SYNTAX	ADMTargetState 
	MAX-ACCESS	read-write 
	STATUS	current
 
	
	DESCRIPTION
		"Trunk Termination Target State.  'not-set' if state is not set."
	
	DEFVAL	{ 1 }

	::=  {  trunkTermOAMPEntry  7  }

trunkTermOAMPMode	OBJECT-TYPE 
	SYNTAX	ADMMode 
	MAX-ACCESS	read-write 
	STATUS	current
 
	
	DESCRIPTION
		"Trunk Termination Mode of control.  'not-set' if state is not set."
	
	DEFVAL { 1 }
	
	::=  {  trunkTermOAMPEntry  8  }

trunkTermOAMPControlState	OBJECT-TYPE 
	SYNTAX	ControlState 
	MAX-ACCESS	read-write 
	STATUS	current
 
	
	DESCRIPTION
		"If the manager does a get, the 2 possible state will be return: insufficient-data is returned if target state column and/or mode of control column is not filled;  ready-to-commit is return if both target-state and mode of control columns are filled.
The manager can perform a set only with the commit state and the value that is immediately returned if successfull is committed.  If not successful, then insufficient data is returned or general error is returned."
	
	::=  {  trunkTermOAMPEntry  9  }

aggrOAMPTable	OBJECT-TYPE
	SYNTAX	SEQUENCE  OF  AggrOAMPEntry
	MAX-ACCESS	not-accessible
	STATUS	current
 	DESCRIPTION
		"Aggr Access for Status/Control"
	::=  { callAgentStatusControl  10 }

aggrOAMPEntry	OBJECT-TYPE
	SYNTAX	AggrOAMPEntry
	MAX-ACCESS	not-accessible
	STATUS	current
 	DESCRIPTION
		"Row description for Aggr Status/Control Access Table"
	INDEX	{  aggrOAMPID  }
	::=  { aggrOAMPTable 1 }

AggrOAMPEntry  ::=  SEQUENCE {
	aggrOAMPID  DisplayString1To32,
	aggrOAMPOperState  AGGROperState
	}
aggrOAMPID	OBJECT-TYPE 
	SYNTAX	DisplayString1To32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"AGGR ID"
	
	::=  {  aggrOAMPEntry  1  }

aggrOAMPOperState	OBJECT-TYPE 
	SYNTAX	AGGROperState 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"AGGR Operational State"
	
	::=  {  aggrOAMPEntry  2  }


mgwBulkStatTable	OBJECT-TYPE
	SYNTAX	SEQUENCE  OF  MgwBulkStatEntry
	MAX-ACCESS	not-accessible
	STATUS	current
 	DESCRIPTION
		"Bulk Status Access for MGW Access"
	::=  { statusControlBulk  1 }

mgwBulkStatEntry	OBJECT-TYPE
	SYNTAX	MgwBulkStatEntry
	MAX-ACCESS	not-accessible
	STATUS	current
 	DESCRIPTION
		"Row description for MGW Bulk Status Table"
	INDEX	{  mgwBulkStatPage }
	::=  { mgwBulkStatTable 1 }

MgwBulkStatEntry  ::=  SEQUENCE {
	mgwBulkStatPage  INTEGER,
	mgwBulkStatVal  OCTET STRING
	}
mgwBulkStatPage	OBJECT-TYPE 
	SYNTAX	INTEGER ( 1..65535 )  
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"Page Number or Row"
	
	::=  {  mgwBulkStatEntry  1  }

mgwBulkStatVal	OBJECT-TYPE 
	SYNTAX	OCTET STRING ( SIZE ( 0..65535 ) )  
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"Delimited string of X number of MGWs.
		The delimiters are:
		';' = delimits each MGW.
		'|' = delimits status fields.

		The protocol of which is: 
		'MGW_ID|admin_state|oper_state;MGW_ID|admin_state...'

		And example: 
		'MGW_ABC|1|3;MGW_XYZ|1|3...'

		The enumerated states are the same as that of 
		mediaGatewayOAMPTable.
		"
	
	::=  {  mgwBulkStatEntry  2  }

trunkGroupBulkStatTable	OBJECT-TYPE
	SYNTAX	SEQUENCE  OF  TrunkGroupBulkStatEntry
	MAX-ACCESS	not-accessible
	STATUS	current
 	DESCRIPTION
		"Bulk Status Access for Trunk Group Access"
	::=  { statusControlBulk  2 }

trunkGroupBulkStatEntry	OBJECT-TYPE
	SYNTAX	TrunkGroupBulkStatEntry
	MAX-ACCESS	not-accessible
	STATUS	current
 	DESCRIPTION
		"Row description for Trunk Group Bulk Status Table"
	INDEX	{  trunkGroupBulkStatPage }
	::=  { trunkGroupBulkStatTable 1 }

TrunkGroupBulkStatEntry  ::=  SEQUENCE {
	trunkGroupBulkStatPage  INTEGER,
	trunkGroupBulkStatVal  OCTET STRING
	}
trunkGroupBulkStatPage	OBJECT-TYPE 
	SYNTAX	INTEGER ( 1..65535 )  
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"Page Number or Row"
	
	::=  {  trunkGroupBulkStatEntry  1  }

trunkGroupBulkStatVal	OBJECT-TYPE 
	SYNTAX	OCTET STRING ( SIZE ( 0..65535 ) )  
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"Delimited string of X number of Trunk Groups.
		The delimiters are:
		';' = delimits each Trunk Group.
		'|' = delimits status fields.

		The protocol of which is: 
		'TGN_ID|admin_state|oper_state;TGN_ID|admin_state...'

		And example: 
		'232|1|3;233|1|3...'

		The enumerated states are the same as that of 
		trunkGroupOAMPTable.
		"
	
	::=  {  trunkGroupBulkStatEntry  2  }

subscriberTermBulkStatTable	OBJECT-TYPE
	SYNTAX	SEQUENCE  OF  SubscriberTermBulkStatEntry
	MAX-ACCESS	not-accessible
	STATUS	current
 	DESCRIPTION
		"Bulk Status Access for Subscriber Termination Access"
	::=  { statusControlBulk  3 }

subscriberTermBulkStatEntry	OBJECT-TYPE
	SYNTAX	SubscriberTermBulkStatEntry
	MAX-ACCESS	not-accessible
	STATUS	current
 	DESCRIPTION
		"Row description for Subscriber Termination Bulk Status Table"
	INDEX	{  subscriberTermBulkStatPage }
	::=  { subscriberTermBulkStatTable 1 }

SubscriberTermBulkStatEntry  ::=  SEQUENCE {
	subscriberTermBulkStatPage  INTEGER,
	subscriberTermBulkStatVal  OCTET STRING
	}
subscriberTermBulkStatPage	OBJECT-TYPE 
	SYNTAX	INTEGER ( 1..65535 )  
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"Page Number or Row"
	
	::=  {  subscriberTermBulkStatEntry  1  }

subscriberTermBulkStatVal	OBJECT-TYPE 
	SYNTAX	OCTET STRING ( SIZE ( 0..65535 ) )  
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"Delimited string of X number of Subscriber Terminations.
		The delimiters are:
		';' = delimits each Subscriber Termination.
		'|' = delimits status fields.

		The protocol of which is: 
		'SUB_ID|admin_state|oper_state;SUB_ID|admin_state...'

		And example: 
		'SUB_ABC|1|3;SUB_XYZ|1|3...'

		The enumerated states are the same as that of 
		subscrLineTermOAMPTable.
		"
	
	::=  {  subscriberTermBulkStatEntry  2  }

trunkTermBulkStatTable	OBJECT-TYPE
	SYNTAX	SEQUENCE  OF  TrunkTermBulkStatEntry
	MAX-ACCESS	not-accessible
	STATUS	current
 	DESCRIPTION
		"Bulk Status Access for Trunk Termination Access"
	::=  { statusControlBulk  4 }

trunkTermBulkStatEntry	OBJECT-TYPE
	SYNTAX	TrunkTermBulkStatEntry
	MAX-ACCESS	not-accessible
	STATUS	current
 	DESCRIPTION
		"Row description for Trunk Termination Bulk Status Table"
	INDEX	{  trunkTermBulkStatPage }
	::=  { trunkTermBulkStatTable 1 }

TrunkTermBulkStatEntry  ::=  SEQUENCE {
	trunkTermBulkStatPage  INTEGER,
	trunkTermBulkStatVal  OCTET STRING
	}
trunkTermBulkStatPage	OBJECT-TYPE 
	SYNTAX	INTEGER ( 1..65535 )  
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"Page Number or Row"
	
	::=  {  trunkTermBulkStatEntry  1  }

trunkTermBulkStatVal	OBJECT-TYPE 
	SYNTAX	OCTET STRING ( SIZE ( 0..65535 ) )  
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"Delimited string of X number of Trunk Terminations.
		The delimiters are:
		';' = delimits each Trunk Termination.
		'|' = delimits status fields.
		'.' = delimits CIC and TGN_ID.

		The protocol of which is: 
		'TGN_ID.CIC|admin_state|oper_state|static_state|dynamic_state;CIC.TGN_ID|admin_state...'

		And example: 
		'232.22|1|3|1|1;233.22|1|3|1|1...'

		The enumerated states are the same as that of 
		trunkTermOAMPTable.
		"
	
	::=  {  trunkTermBulkStatEntry  2  }


optiMediaGatewayOAMPTable	OBJECT-TYPE
    SYNTAX SEQUENCE OF		OptiMediaGatewayOAMPEntry
    MAX-ACCESS			not-accessible
    STATUS  			obsolete
    DESCRIPTION
	"Optimized Media Gateway Access for Status/Control"
    ::= { callAgentOptimized  1 }

optiMediaGatewayOAMPEntry	OBJECT-TYPE
    SYNTAX			OptiMediaGatewayOAMPEntry
    MAX-ACCESS			not-accessible
    STATUS			obsolete
    DESCRIPTION
	"Row description for Optimized Media Gateway Status/Control Access Table"
    INDEX  { optiMediaGatewayOAMPID }	
    ::= { optiMediaGatewayOAMPTable  1 }

OptiMediaGatewayOAMPEntry  ::=  SEQUENCE {
	optiMediaGatewayOAMPID  DisplayString1To32,
	optiMediaGatewayOAMPAdminState  ADMAdminState,
	optiMediaGatewayOAMPOperState  OptiMGWOperState,
	optiMediaGatewayOAMPTargetState  ADMTargetState,
	optiMediaGatewayOAMPMode  ADMMode,
	optiMediaGatewayControlState  ControlState
	}

optiMediaGatewayOAMPID	OBJECT-TYPE
	SYNTAX  DisplayString1To32
	MAX-ACCESS	read-only
	STATUS		obsolete
	DESCRIPTION
		"Media Gateway ID"
	::=  {  optiMediaGatewayOAMPEntry  1  }

optiMediaGatewayOAMPAdminState      OBJECT-TYPE
        SYNTAX  ADMAdminState
        MAX-ACCESS      read-only
        STATUS  obsolete


        DESCRIPTION
                "Media Gateway obsolete State"

        ::=  {  optiMediaGatewayOAMPEntry  2  }

optiMediaGatewayOAMPOperState       OBJECT-TYPE
        SYNTAX  OptiMGWOperState
        MAX-ACCESS      read-only
        STATUS  obsolete


        DESCRIPTION
                "Media Gateway Operational State"

        ::=  {  optiMediaGatewayOAMPEntry  3  }

optiMediaGatewayOAMPTargetState     OBJECT-TYPE
        SYNTAX  ADMTargetState
        MAX-ACCESS      read-write
        STATUS  obsolete


        DESCRIPTION
                "Media Gateway Target State.  'not-set' if state is not set."

        DEFVAL  {1}

        ::=  {  optiMediaGatewayOAMPEntry  4  }

optiMediaGatewayOAMPMode    OBJECT-TYPE
        SYNTAX  ADMMode
        MAX-ACCESS      read-write
        STATUS  obsolete


        DESCRIPTION
                "Media Gateway Mode of control.  'not-set' if state is not set"

        DEFVAL { 1 }

        ::=  {  optiMediaGatewayOAMPEntry  5  }

optiMediaGatewayControlState        OBJECT-TYPE
        SYNTAX  ControlState
        MAX-ACCESS      read-write
        STATUS  obsolete


        DESCRIPTION
                "If the manager does a get, the 2 possible state will be return:
 insufficient-data is returned if target state column and/or mode of control col
umn is not filled;  ready-to-commit is return if both target-state and mode of c
ontrol columns are filled.
The manager can perform a set only with the commit state and the value that is i
mmediately returned if successfull is committed.  If not successful, then insuff
icient data is returned or general error is returned."

        ::=  {  optiMediaGatewayOAMPEntry  6  }


optiSubscrLineTermOAMPTable OBJECT-TYPE
        SYNTAX  SEQUENCE  OF  OptiSubscrLineTermOAMPEntry
        MAX-ACCESS      not-accessible
        STATUS  obsolete
        DESCRIPTION
                "Optimized Subscriber Line Termination Access of OAMP"
        ::=  { callAgentOptimized  2 }

optiSubscrLineTermOAMPEntry OBJECT-TYPE
        SYNTAX  OptiSubscrLineTermOAMPEntry
        MAX-ACCESS      not-accessible
        STATUS  obsolete
        DESCRIPTION
                "Row description for Optimized Subscriber Line Termination Access Table"
        INDEX   {  optiSubscrLineTermOAMPID  }
        ::=  { optiSubscrLineTermOAMPTable 1 }

OptiSubscrLineTermOAMPEntry  ::=  SEQUENCE {
        optiSubscrLineTermOAMPID  DisplayString,
        optiSubscrLineTermOAMPAdminState  ADMAdminState,
        optiSubscrLineTermOAMPOperState  OptiTerminationOperState,
        optiSubscrLineTermOAMPTargetState  ADMTargetState,
        optiSubscrLineTermOAMPMode  ADMMode,
        optiSubscrLineTermOAMPControlState  ControlState
        }

optiSubscrLineTermOAMPID    OBJECT-TYPE
        SYNTAX  DisplayString ( SIZE ( 1..30 ) ) 
        MAX-ACCESS      read-only
        STATUS  obsolete


        DESCRIPTION
                "Subscriber Line Termination ID"

        ::=  {  optiSubscrLineTermOAMPEntry  1  }

optiSubscrLineTermOAMPAdminState    OBJECT-TYPE
        SYNTAX  ADMAdminState
        MAX-ACCESS      read-only
        STATUS  obsolete


        DESCRIPTION
                "Subscriber Line Termination obsolete State"

        ::=  {  optiSubscrLineTermOAMPEntry  2  }

optiSubscrLineTermOAMPOperState     OBJECT-TYPE
        SYNTAX  OptiTerminationOperState
        MAX-ACCESS      read-only
        STATUS  obsolete


        DESCRIPTION
                "Subscriber Line Termination Operational State"

        ::=  {  optiSubscrLineTermOAMPEntry  3  }

optiSubscrLineTermOAMPTargetState   OBJECT-TYPE
        SYNTAX  ADMTargetState
        MAX-ACCESS      read-write
        STATUS  obsolete


        DESCRIPTION
                "Subscriber Line Termination Target State.  'not-set' if state i
s not set."

        DEFVAL  { 1 }

        ::=  {  optiSubscrLineTermOAMPEntry  4  }

optiSubscrLineTermOAMPMode  OBJECT-TYPE
        SYNTAX  ADMMode
        MAX-ACCESS      read-write
        STATUS  obsolete


        DESCRIPTION
                "Subscriber Line Termination Mode of control.  'not-set' if stat
e is not set."

        DEFVAL { 1 }

        ::=  {  optiSubscrLineTermOAMPEntry  5  }

optiSubscrLineTermOAMPControlState  OBJECT-TYPE
        SYNTAX  ControlState
        MAX-ACCESS      read-write
        STATUS  obsolete


        DESCRIPTION
                "If the manager does a get, the 2 possible state will be return:
 insufficient-data is returned if target state column and/or mode of control col
umn is not filled;  ready-to-commit is return if both target-state and mode of c
ontrol columns are filled.
The manager can perform a set only with the commit state and the value that is i
mmediately returned if successfull is committed.  If not successful, then insuff
icient data is returned or general error is returned."

        ::=  {  optiSubscrLineTermOAMPEntry  6  }



optiTrunkGroupOAMPTable     OBJECT-TYPE
        SYNTAX  SEQUENCE  OF  OptiTrunkGroupOAMPEntry
        MAX-ACCESS      not-accessible
        STATUS  obsolete
        DESCRIPTION
                "Optimized Trunk Group Access for OAMP"
        ::=  { callAgentOptimized  3 }

optiTrunkGroupOAMPEntry     OBJECT-TYPE
        SYNTAX  OptiTrunkGroupOAMPEntry
        MAX-ACCESS      not-accessible
        STATUS  obsolete
        DESCRIPTION
                "Row description for Optimized Trunk Group Table Access"
        INDEX   {  optiTrunkGroupOAMPID, optiTrunkGroupOAMPCallAgentID }
        ::=  { optiTrunkGroupOAMPTable  1 }

OptiTrunkGroupOAMPEntry  ::=  SEQUENCE {
        optiTrunkGroupOAMPID  Integer32,
        optiTrunkGroupOAMPCallAgentID  DisplayString1To64,
        optiTrunkGroupOAMPAdminState  ADMAdminState,
        optiTrunkGroupOAMPOperState  OptiTrunkGrpOperState,
        optiTrunkGroupOAMPTargetState  ADMTargetState,
        optiTrunkGroupOAMPMode  ADMMode,
        optiTrunkGroupOAMPControlState  ControlState
        }

optiTrunkGroupOAMPID        OBJECT-TYPE
        SYNTAX  Integer32
        MAX-ACCESS      read-only
        STATUS  obsolete


        DESCRIPTION
                "Trunk Group Number"

        ::=  {  optiTrunkGroupOAMPEntry  1  }

optiTrunkGroupOAMPCallAgentID       OBJECT-TYPE
        SYNTAX  DisplayString1To64
        MAX-ACCESS      read-only
        STATUS  obsolete


        DESCRIPTION
                "Call Agent ID"

        ::=  {  optiTrunkGroupOAMPEntry  2  }

optiTrunkGroupOAMPAdminState        OBJECT-TYPE
        SYNTAX  ADMAdminState
        MAX-ACCESS      read-only
        STATUS  obsolete


        DESCRIPTION
                "Trunk Group Admin State"

        ::=  {  optiTrunkGroupOAMPEntry  3  }

optiTrunkGroupOAMPOperState OBJECT-TYPE
        SYNTAX  OptiTrunkGrpOperState
        MAX-ACCESS      read-only
        STATUS  obsolete


        DESCRIPTION
                "Trunk Operational State"

        ::=  {  optiTrunkGroupOAMPEntry  4  }

optiTrunkGroupOAMPTargetState       OBJECT-TYPE
        SYNTAX  ADMTargetState
        MAX-ACCESS      read-write
        STATUS  obsolete


        DESCRIPTION
                "Trunk Target State.  'not-set' if state is not set."

        DEFVAL  {1}

        ::=  {  optiTrunkGroupOAMPEntry  5  }

optiTrunkGroupOAMPMode      OBJECT-TYPE
        SYNTAX  ADMMode
        MAX-ACCESS      read-write
        STATUS  obsolete


        DESCRIPTION
                "Trunk Target Mode of control.  'not-set' if state is not set."

        DEFVAL { 1 }

        ::=  {  optiTrunkGroupOAMPEntry  6  }

optiTrunkGroupOAMPControlState      OBJECT-TYPE
        SYNTAX  ControlState
        MAX-ACCESS      read-write
        STATUS  obsolete


        DESCRIPTION
                "If the manager does a get, the 2 possible state will be return:
 insufficient-data is returned if target state column and/or mode of control col
umn is not filled;  ready-to-commit is return if both target-state and mode of c
ontrol columns are filled.
The manager can perform a set only with the commit state and the value that is i
mmediately returned if successfull is committed.  If not successful, then insuff
icient data is returned or general error is returned."

        ::=  {  optiTrunkGroupOAMPEntry  7  }


optiTrunkTermOAMPTable      OBJECT-TYPE
        SYNTAX  SEQUENCE  OF  OptiTrunkTermOAMPEntry
        MAX-ACCESS      not-accessible
        STATUS  obsolete
        DESCRIPTION
                "Optimized Trunk Termination Access for OAMP"
        ::=  {  callAgentOptimized  4  }

optiTrunkTermOAMPEntry      OBJECT-TYPE
        SYNTAX  OptiTrunkTermOAMPEntry
        MAX-ACCESS      not-accessible
        STATUS  obsolete
        DESCRIPTION
                "Row description for Optimized Trunk Termination Access Table"
        INDEX   {  optiTrunkTermOAMPTrunkGrpID, optiTrunkTermOAMPCIC }
        ::=  { optiTrunkTermOAMPTable 1 }

OptiTrunkTermOAMPEntry  ::=  SEQUENCE {
        optiTrunkTermOAMPTrunkGrpID  Integer32,
        optiTrunkTermOAMPCIC  INTEGER,
        optiTrunkTermOAMPAdminState  ADMAdminState,
        optiTrunkTermOAMPOperState  OptiTerminationOperState,
        optiTrunkTermOAMPTargetState  ADMTargetState,
        optiTrunkTermOAMPMode  ADMMode,
        optiTrunkTermOAMPControlState  ControlState
        }

optiTrunkTermOAMPTrunkGrpID OBJECT-TYPE
        SYNTAX  Integer32
        MAX-ACCESS      read-only
        STATUS  obsolete


        DESCRIPTION
                "Trunk Group ID"

        ::=  {  optiTrunkTermOAMPEntry  1  }

optiTrunkTermOAMPCIC        OBJECT-TYPE
        SYNTAX  INTEGER ( 1..65535 )
        MAX-ACCESS      read-only
        STATUS  obsolete


        DESCRIPTION
                "Trunk CIC"

        ::=  {  optiTrunkTermOAMPEntry  2  }

optiTrunkTermOAMPAdminState OBJECT-TYPE
        SYNTAX  ADMAdminState
        MAX-ACCESS      read-only
        STATUS  obsolete


        DESCRIPTION
                "Trunk Termination Admin State"

        ::=  {  optiTrunkTermOAMPEntry  3  }

optiTrunkTermOAMPOperState  OBJECT-TYPE
        SYNTAX  OptiTerminationOperState
        MAX-ACCESS      read-only
        STATUS  obsolete


        DESCRIPTION
                "Trunk Termination Operational State"

        ::=  {  optiTrunkTermOAMPEntry  4  }

optiTrunkTermOAMPTargetState        OBJECT-TYPE
        SYNTAX  ADMTargetState
        MAX-ACCESS      read-write
        STATUS  obsolete


        DESCRIPTION
                "Trunk Termination Target State.  'not-set' if state is not set.
"

        DEFVAL  { 1 }

        ::=  {  optiTrunkTermOAMPEntry  5  }

optiTrunkTermOAMPMode       OBJECT-TYPE
        SYNTAX  ADMMode
        MAX-ACCESS      read-write
        STATUS  obsolete


        DESCRIPTION
                "Trunk Termination Mode of control.  'not-set' if state is not s
et."

        DEFVAL { 1 }

        ::=  {  optiTrunkTermOAMPEntry  6  }

optiTrunkTermOAMPControlState       OBJECT-TYPE
        SYNTAX  ControlState
        MAX-ACCESS      read-write
        STATUS  obsolete


        DESCRIPTION
                "If the manager does a get, the 2 possible state will be return:
 insufficient-data is returned if target state column and/or mode of control col
umn is not filled;  ready-to-commit is return if both target-state and mode of c
ontrol columns are filled.
The manager can perform a set only with the commit state and the value that is i
mmediately returned if successfull is committed.  If not successful, then insuff
icient data is returned or general error is returned."

        ::=  {  optiTrunkTermOAMPEntry  7  }


elementManagerOAMPTable	OBJECT-TYPE
	SYNTAX	SEQUENCE  OF  ElementManagerOAMPEntry
	MAX-ACCESS	not-accessible
	STATUS	current
 	DESCRIPTION
		"Element Manager Access for Control/Status"
	::=  { emsStatusControl  1 }

elementManagerOAMPEntry	OBJECT-TYPE
	SYNTAX	ElementManagerOAMPEntry
	MAX-ACCESS	not-accessible
	STATUS	current
 	DESCRIPTION
		"Row description for Element Manager access table"
	INDEX	{  elementManagerOAMPID  }
	::=  { elementManagerOAMPTable 1 }

ElementManagerOAMPEntry  ::=  SEQUENCE {
	elementManagerOAMPID  DisplayString1To64,
	elementManagerOAMPPrimaryState  KAMState,
	elementManagerOAMPSecondaryState  KAMState
	}

elementManagerOAMPID	OBJECT-TYPE 
	SYNTAX	DisplayString1To64 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"Call Agent ID"
	
	::=  {  elementManagerOAMPEntry  1  }

elementManagerOAMPPrimaryState	OBJECT-TYPE 
	SYNTAX	KAMState 
	MAX-ACCESS	read-write 
	STATUS	current
 
	
	DESCRIPTION
		"Current State of Primary Call Agent"
	
	::=  {  elementManagerOAMPEntry  2  }

elementManagerOAMPSecondaryState	OBJECT-TYPE 
	SYNTAX	KAMState 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"Current State of Secondary Call Agent"
	
	::=  {  elementManagerOAMPEntry  3  }

bdmsOAMPTable	OBJECT-TYPE
	SYNTAX	SEQUENCE  OF  BdmsOAMPEntry
	MAX-ACCESS	not-accessible
	STATUS	current
 	DESCRIPTION
		"Billing Database Management Server BDMS Access for Control/Status"
	::=  { emsStatusControl  2 }

bdmsOAMPEntry	OBJECT-TYPE
	SYNTAX	BdmsOAMPEntry
	MAX-ACCESS	not-accessible
	STATUS	current
 	DESCRIPTION
		"Row description for BDMS access table"
	INDEX	{  bdmsOAMPID  }
	::=  { bdmsOAMPTable 1 }

BdmsOAMPEntry  ::=  SEQUENCE {
	bdmsOAMPID  DisplayString1To64,
	bdmsOAMPPrimaryState  KAMState,
	bdmsOAMPSecondaryState  KAMState
	}

bdmsOAMPID	OBJECT-TYPE 
	SYNTAX	DisplayString1To64 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"Call Agent ID"
	
	::=  {  bdmsOAMPEntry  1  }

bdmsOAMPPrimaryState	OBJECT-TYPE 
	SYNTAX	KAMState 
	MAX-ACCESS	read-write 
	STATUS	current
 
	
	DESCRIPTION
		"Current State of Primary Call Agent"
	
	::=  {  bdmsOAMPEntry  2  }

bdmsOAMPSecondaryState	OBJECT-TYPE 
	SYNTAX	KAMState 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"Current State of Secondary Call Agent"
	
	::=  {  bdmsOAMPEntry  3  }


sgpOAMPTable	OBJECT-TYPE
	SYNTAX	SEQUENCE  OF  SgpOAMPEntry
	MAX-ACCESS	not-accessible
	STATUS	current
 	DESCRIPTION
		"SGP Access for Status/Control"
	::=  { signalingAdapterStatusControl  1 }

sgpOAMPEntry	OBJECT-TYPE
	SYNTAX	SgpOAMPEntry
	MAX-ACCESS	not-accessible
	STATUS	current
 	DESCRIPTION
		"Row description for SGP Status/Control Access Table"
	INDEX	{  sgpOAMPID, sgpOAMPPlatformID  }
	::=  { sgpOAMPTable 1 }

SgpOAMPEntry  ::=  SEQUENCE {
	sgpOAMPID  DisplayString1To32,
	sgpOAMPPlatformID  DisplayString1To32,
	sgpOAMPOperState  SGPOperState
	}
sgpOAMPID	OBJECT-TYPE 
	SYNTAX	DisplayString1To32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"SGP ID"
	
	::=  {  sgpOAMPEntry  1  }

sgpOAMPPlatformID	OBJECT-TYPE 
	SYNTAX	DisplayString1To32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"SGP Platform ID"
	
	::=  {  sgpOAMPEntry  2  }

sgpOAMPOperState	OBJECT-TYPE 
	SYNTAX	SGPOperState 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"SGP Operational State"
	
	::=  {  sgpOAMPEntry  3  }

dpcOAMPTable	OBJECT-TYPE
	SYNTAX	SEQUENCE  OF  DpcOAMPEntry
	MAX-ACCESS	not-accessible
	STATUS	current
 	DESCRIPTION
		"DPC Access for Status/Control"
	::=  { signalingAdapterStatusControl  2 }

dpcOAMPEntry	OBJECT-TYPE
	SYNTAX	DpcOAMPEntry
	MAX-ACCESS	not-accessible
	STATUS	current
 	DESCRIPTION
		"Row description for DPC Status/Control Access Table"
	INDEX	{  dpcOAMPID, dpcOAMPPlatformID  }
	::=  { dpcOAMPTable 1 }

DpcOAMPEntry  ::=  SEQUENCE {
	dpcOAMPID  DisplayString1To32,
	dpcOAMPPlatformID  DisplayString1To32,
	dpcOAMPOperState  DPCOperState
	}
dpcOAMPID	OBJECT-TYPE 
	SYNTAX	DisplayString1To32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"DPC ID"
	
	::=  {  dpcOAMPEntry  1  }

dpcOAMPPlatformID	OBJECT-TYPE 
	SYNTAX	DisplayString1To32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"DPC Platform ID"
	
	::=  {  dpcOAMPEntry  2  }

dpcOAMPOperState	OBJECT-TYPE 
	SYNTAX	DPCOperState 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"DPC Operational State"
	
	::=  {  dpcOAMPEntry  3  }

sctpAssOAMPTable	OBJECT-TYPE
	SYNTAX	SEQUENCE  OF  SctpAssOAMPEntry
	MAX-ACCESS	not-accessible
	STATUS	current
 	DESCRIPTION
		"SCTP Associated Access for Status/Control"
	::=  { signalingAdapterStatusControl  3 }

sctpAssOAMPEntry	OBJECT-TYPE
	SYNTAX	SctpAssOAMPEntry
	MAX-ACCESS	not-accessible
	STATUS	current
 	DESCRIPTION
		"Row description for SCTP Associated Status/Control Access Table"
	INDEX	{  sctpAssOAMPID  }
	::=  { sctpAssOAMPTable 1 }

SctpAssOAMPEntry  ::=  SEQUENCE {
	sctpAssOAMPID  DisplayString1To32,
	sctpAssOAMPAdminState  ADMAdminState,
	sctpAssOAMPOperState  SCTPAssOperState,
	sctpAssOAMPTargetState  SCTPAssTargetState,
	sctpAssOAMPMode  ADMMode,
	sctpAssControlState  ControlState
	}
sctpAssOAMPID	OBJECT-TYPE 
	SYNTAX	DisplayString1To32 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"SCTP Associated ID"
	
	::=  {  sctpAssOAMPEntry  1  }

sctpAssOAMPAdminState	OBJECT-TYPE 
	SYNTAX	ADMAdminState 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"SCTP Associated Current State"
	
	::=  {  sctpAssOAMPEntry  2  }

sctpAssOAMPOperState	OBJECT-TYPE 
	SYNTAX	SCTPAssOperState 
	MAX-ACCESS	read-only 
	STATUS	current
 
	
	DESCRIPTION
		"SCTP Associated Operational State"
	
	::=  {  sctpAssOAMPEntry  3  }

sctpAssOAMPTargetState	OBJECT-TYPE 
	SYNTAX	SCTPAssTargetState 
	MAX-ACCESS	read-write 
	STATUS	current
 
	
	DESCRIPTION
		"SCTP Associated Target State.  'not-set' if state is not set."
	
	DEFVAL	{1}

	::=  {  sctpAssOAMPEntry  4  }

sctpAssOAMPMode	OBJECT-TYPE 
	SYNTAX	ADMMode 
	MAX-ACCESS	read-write 
	STATUS	current
 
	
	DESCRIPTION
		"SCTP Associated Mode of control.  'not-set' if state is not set"

	DEFVAL { 1 }
	
	::=  {  sctpAssOAMPEntry  5  }

sctpAssControlState	OBJECT-TYPE 
	SYNTAX	ControlState 
	MAX-ACCESS	read-write 
	STATUS	current
 
	
	DESCRIPTION
		"If the manager does a get, the 2 possible state will be return: insufficient-data is returned if target state column and/or mode of control column is not filled;  ready-to-commit is return if both target-state and mode of control columns are filled.
The manager can perform a set only with the commit state and the value that is immediately returned if successfull is committed.  If not successful, then insufficient data is returned or general error is returned."
	
	::=  {  sctpAssOAMPEntry  6  }

--
-- Start of Current Trap Definitions
--

startOrStopOfSS7CICAudit	NOTIFICATION-TYPE
	OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	current
	DESCRIPTION	"Start or Stop of SS7-CIC audit.
			SS7 CIC audit has started or stopped.
			Report Type: audit, Report Num: 2,
			Severity: info, Threshhold: 100, Throttle: 0;
			The details contain syntax in the form:
			type of audit = value."
	REFERENCE	""
  ::=  {  auditTraps  2  }


ss7CICAuditTerminatedBeforeSuccessfulCompletion	NOTIFICATION-TYPE
	OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	current
	DESCRIPTION	"SS7 CIC audit terminated before successful completion.
			A higher priority SS7 CIC audit interrupted and terminated a lower priority SS7 CIC audit.
			Report Type: audit, Report Num: 3,
			Severity: warning, Threshhold: 100, Throttle: 0;
			The details contain syntax in the form:
			type of audit = value."
	REFERENCE	""
  ::=  {  auditTraps  3  }


callExceedsALongDurationThreshold	NOTIFICATION-TYPE
	OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	current
	DESCRIPTION	"Call exceeds a long-duration threshold.
			Call exceeds current system long-duration threshold.
			Report Type: audit, Report Num: 4,
			Severity: warning, Threshhold: 100, Throttle: 0;
			The details contain syntax in the form:
			Trunk group number = value; Trunk member number = value;
			Current long-duration threshold = value."
	REFERENCE	""
  ::=  {  auditTraps  4  }


criticalInternalAuditFailure	NOTIFICATION-TYPE
	OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	current
	DESCRIPTION	"Critical Internal Audit Failure.
			See Data Field
			Report Type: audit, Report Num: 5,
			Severity: critical, Threshhold: 100, Throttle: 0;
			The details contain syntax in the form:
			Failure Details = value; Probable Causes = value;
			Corrective Actions = value."
	REFERENCE	""
  ::=  {  auditTraps  5  }


majorInternalAuditFailure	NOTIFICATION-TYPE
	OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	current
	DESCRIPTION	"Major Internal Audit Failure.
			See Data Field
			Report Type: audit, Report Num: 6,
			Severity: major, Threshhold: 100, Throttle: 0;
			The details contain syntax in the form:
			Failure Details = value; Probable Causes = value;
			Corrective Actions = value."
	REFERENCE	""
  ::=  {  auditTraps  6  }


minorInternalAuditFailure	NOTIFICATION-TYPE
	OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	current
	DESCRIPTION	"Minor Internal Audit Failure.
			See Data Field
			Report Type: audit, Report Num: 7,
			Severity: minor, Threshhold: 100, Throttle: 0;
			The details contain syntax in the form:
			Failure Details = value; Probable Causes = value;
			Corrective Actions = value."
	REFERENCE	""
  ::=  {  auditTraps  7  }


warningFromInternalAudit	NOTIFICATION-TYPE
	OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	current
	DESCRIPTION	"Warning From Internal Audit.
			See Data Field
			Report Type: audit, Report Num: 8,
			Severity: warning, Threshhold: 100, Throttle: 0;
			The details contain syntax in the form:
			Failure Details = value; Probable Causes = value;
			Corrective Actions = value."
	REFERENCE	""
  ::=  {  auditTraps  8  }


processHeapMemoryUsageExceedsMinorThresholdLevel	NOTIFICATION-TYPE
	OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	current
	DESCRIPTION	"Process Heap memory usage exceeds minor threshold level.
			Increase in heap usage due to high call traffic or maintenance operation.
			Report Type: audit, Report Num: 16,
			Severity: minor, Threshhold: 100, Throttle: 0;
			The details contain syntax in the form:
			Process Name = value; Heap size in KB = value;
			Heap Limit in KB = value; Heap usage percentage = value;
			Threshold level percentge = value."
	REFERENCE	""
  ::=  {  auditTraps  16  }


processHeapMemoryUsageExceedsMajorThresholdLevel	NOTIFICATION-TYPE
	OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	current
	DESCRIPTION	"Process Heap memory usage exceeds major threshold level.
			Increase in heap usage due to high call traffic or maintenance operation.
			Report Type: audit, Report Num: 17,
			Severity: major, Threshhold: 100, Throttle: 0;
			The details contain syntax in the form:
			Process Name = value; Heap size in KB = value;
			Heap Limit in KB = value; Heap usage percentage = value;
			Threshold level percentge = value."
	REFERENCE	""
  ::=  {  auditTraps  17  }


processHeapMemoryUsageExceedsCriticalThresholdLevel	NOTIFICATION-TYPE
	OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	current
	DESCRIPTION	"Process Heap memory usage exceeds critical threshold level.
			Increase in heap usage due to high call traffic or maintenance operation.
			Report Type: audit, Report Num: 18,
			Severity: critical, Threshhold: 100, Throttle: 0;
			The details contain syntax in the form:
			Process Name = value; Heap size in KB = value;
			Heap Limit in KB = value; Heap usage percentage = value;
			Threshold level percentge = value."
	REFERENCE	""
  ::=  {  auditTraps  18  }


billingPartitionDiskUsageMinorThresholdExceeded	NOTIFICATION-TYPE
	OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	current
	DESCRIPTION	"Billing Partition Disk Usage Minor Threshold Exceeded.
			Call detail records are accumulating on the disk associated with the billing database in the EMS. This is because data is being written into the database faster than it is being read out of the database. The minor threshold (default value=70%) has been exceeded.
			NOTE: Some fluctuation in disk usage is to be expected as call volume rises and falls during the day. Threshold crossings might step upward (from MINOR to MAJOR to CRITICAL) when there is a rapid increase in call volume, and then step downward (CRITICAL to MAJOR to MINOR) when call volume slows.
			Report Type: billing, Report Num: 2,
			Severity: minor, Threshhold: 100, Throttle: 0;
			The details contain syntax in the form:
			Disk Usage Percentag = value."
	REFERENCE	""
  ::=  {  billingTraps  2  }


billingPartitionDiskUsageMajorThresholdExceeded	NOTIFICATION-TYPE
	OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	current
	DESCRIPTION	"Billing Partition Disk Usage Major Threshold Exceeded.
			Call detail records are accumulating on the disk associated with the billing database in the EMS. This is because data is being written into the database faster than it is being read out of the database. The major threshold (default value=80%) has been exceeded.
			NOTE: Some fluctuation in disk usage is to be expected as call volume rises and falls during the day. Threshold crossings might step upward (from MINOR to MAJOR to CRITICAL) when there is a rapid increase in call volume, and then step downward (CRITICAL to MAJOR to MINOR) when call volume slows.
			Report Type: billing, Report Num: 3,
			Severity: major, Threshhold: 100, Throttle: 0;
			The details contain syntax in the form:
			Disk Usage Percentag = value."
	REFERENCE	""
  ::=  {  billingTraps  3  }


billingPartitionDiskUsageCriticalThresholdExceeded	NOTIFICATION-TYPE
	OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	current
	DESCRIPTION	"Billing Partition Disk Usage Critical Threshold Exceeded.
			Call detail records are accumulating on the disk associated with the billing database in the EMS. This is because data is being written into the database faster than it is being read out of the database. The major threshold (default value=90%) has been exceeded.
			NOTE: Some fluctuation in disk usage is to be expected as call volume rises and falls during the day. Threshold crossings might step upward (from MINOR to MAJOR to CRITICAL) when there is a rapid increase in call volume, and then step downward (CRITICAL to MAJOR to MINOR) when call volume slows.
			Report Type: billing, Report Num: 4,
			Severity: critical, Threshhold: 100, Throttle: 0;
			The details contain syntax in the form:
			Disk Usage Percentag = value."
	REFERENCE	""
  ::=  {  billingTraps  4  }


billingPartitionDiskUsageWithinNormalRange	NOTIFICATION-TYPE
	OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	current
	DESCRIPTION	"Billing Partition Disk Usage Within Normal Range.
			Report Type: billing, Report Num: 5,
			Severity: info, Threshhold: 100, Throttle: 0;
			The details contain syntax in the form:
			Disk Usage Percentag = value."
	REFERENCE	""
  ::=  {  billingTraps  5  }


failedToMakeFtpTransfer	NOTIFICATION-TYPE
	OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	current
	DESCRIPTION	"FTP/SFTP transfer failed.
			Unable to connect to remote host.
			Unable to login to remote host.
			File transfer error.
			Report Type: billing, Report Num: 6,
			Severity: major, Threshhold: 100, Throttle: 0;
			The details contain syntax in the form:
			TransferType = value; FileName = value; 
			RemoteAddress = value; Error = value."
	REFERENCE	""
  ::=  {  billingTraps  6  }


tcpConnectionError	NOTIFICATION-TYPE
	OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	current
	DESCRIPTION	"TCP Connection Error.
			System call error.
			Not connected to the right address.
			Report Type: billing, Report Num: 7,
			Severity: critical, Threshhold: 100, Throttle: 0;
			The details contain syntax in the form:
			Hostname = value."
	REFERENCE	""
  ::=  {  billingTraps  7  }


tcpPacketReceiveFailure	NOTIFICATION-TYPE
	OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	current
	DESCRIPTION	"TCP Packet Receive Failure.
			Peer went down; Socket closed.
			Report Type: billing, Report Num: 8,
			Severity: major, Threshhold: 100, Throttle: 0;
			The details contain syntax in the form:
			Host Name = value."
	REFERENCE	""
  ::=  {  billingTraps  8  }


duplicateEventMessageReceived	NOTIFICATION-TYPE
	OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	obsolete
	DESCRIPTION	"Duplicate Event Message Received.
			The Basic Call Model (BCM) supplied a duplicate message for the same call. The message is redundant.
			Report Type: billing, Report Num: 9,
			Severity: warning, Threshhold: 100, Throttle: 0;
			The details contain syntax in the form:
			Event Message Type = value."
	REFERENCE	""
  ::=  {  billingTraps  9  }


databaseLockError	NOTIFICATION-TYPE
	OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	obsolete
	DESCRIPTION	"Database Lock Error.
			SQL server went down.
			Connection has been corrupted.
			Report Type: billing, Report Num: 10,
			Severity: warning, Threshhold: 100, Throttle: 0;
			There are no details associated."
	REFERENCE	""
  ::=  {  billingTraps  10  }


databaseUnlockError	NOTIFICATION-TYPE
	OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	obsolete
	DESCRIPTION	"Database Unlock Error.
			Database connection lost.
			The tables are locked by another thread, and the current thread has timed out waiting for the lock to be released.
			Report Type: billing, Report Num: 11,
			Severity: warning, Threshhold: 100, Throttle: 0;
			There are no details associated."
	REFERENCE	""
  ::=  {  billingTraps  11  }


tablePointerReadError	NOTIFICATION-TYPE
	OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	obsolete
	DESCRIPTION	"Table Pointer Read Error.
			Database connection lost.
			The tables might be locked by another thread, and the current thread has timed out waiting for the lock to be released.
			Report Type: billing, Report Num: 12,
			Severity: warning, Threshhold: 100, Throttle: 0;
			The details contain syntax in the form:
			Table Name = value."
	REFERENCE	""
  ::=  {  billingTraps  12  }


databaseConnectionError	NOTIFICATION-TYPE
	OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	current
	DESCRIPTION	"Database Connection Error.
			SQL server is down.
			Report Type: billing, Report Num: 13,
			Severity: critical, Threshhold: 100, Throttle: 0;
			There are no details associated."
	REFERENCE	""
  ::=  {  billingTraps  13  }


fileOpenError	NOTIFICATION-TYPE
	OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	current
	DESCRIPTION	"File Open Error.
			System error, may be out of file descriptors.
			Report Type: billing, Report Num: 14,
			Severity: warning, Threshhold: 100, Throttle: 0;
			The details contain syntax in the form:
			Path Name = value."
	REFERENCE	""
  ::=  {  billingTraps  14  }


fileWriteError	NOTIFICATION-TYPE
	OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	current
	DESCRIPTION	"File Write Error.
			System error, may be out of file descriptors.
			Report Type: billing, Report Num: 15,
			Severity: major, Threshhold: 100, Throttle: 0;
			The details contain syntax in the form:
			Path Name = value."
	REFERENCE	""
  ::=  {  billingTraps  15  }


timePointCalculationError	NOTIFICATION-TYPE
	OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	obsolete
	DESCRIPTION	"Time Point Calculation Error.
			Either the time points are 0 or call disconnection is less than connect time.
			Report Type: billing, Report Num: 16,
			Severity: warning, Threshhold: 100, Throttle: 0;
			The details contain syntax in the form:
			Start Time = value; End Time = value."
	REFERENCE	""
  ::=  {  billingTraps  16  }


sharedMemoryAddFailure	NOTIFICATION-TYPE
	OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	obsolete
	DESCRIPTION	"Shared Memory Add Failure.
			Out of allocated shared memory space.
			Report Type: billing, Report Num: 17,
			Severity: minor, Threshhold: 100, Throttle: 0;
			There are no details associated."
	REFERENCE	""
  ::=  {  billingTraps  17  }


errorCallingMKTIMEFunction	NOTIFICATION-TYPE
	OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	obsolete
	DESCRIPTION	"Error Calling MKTIME Function.
			System call error.
			Report Type: billing, Report Num: 18,
			Severity: warning, Threshhold: 100, Throttle: 0;
			The details contain syntax in the form:
			Seconds = value; Minutes = value;
			Hour = value; Day = value;
			Month = value; Year = value."
	REFERENCE	""
  ::=  {  billingTraps  18  }


callDetailBlockDatabaseWriteError	NOTIFICATION-TYPE
	OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	obsolete
	DESCRIPTION	"Call Detail Block Database Write Error.
			SQL server is down.
			Query is wrong; software error
			Report Type: billing, Report Num: 19,
			Severity: minor, Threshhold: 100, Throttle: 0;
			There are no details associated."
	REFERENCE	""
  ::=  {  billingTraps  19  }


callDetailBlockDatabaseReadError	NOTIFICATION-TYPE
	OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	obsolete
	DESCRIPTION	"Call Detail Block Database Read Error.
			SQL server is down.
			Query is wrong; software error.
			Report Type: billing, Report Num: 20,
			Severity: minor, Threshhold: 100, Throttle: 0;
			There are no details associated."
	REFERENCE	""
  ::=  {  billingTraps  20  }


unknownBillingEventMessageReceived	NOTIFICATION-TYPE
	OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	obsolete
	DESCRIPTION	"Unknown Billing Event Message Received.
			Unrecognized message recalled from Basic Call Model (BCM).
			Report Type: billing, Report Num: 21,
			Severity: warning, Threshhold: 100, Throttle: 0;
			The details contain syntax in the form:
			Message Type = value."
	REFERENCE	""
  ::=  {  billingTraps  21  }


errorReleasingStagingAreaInSharedMemory	NOTIFICATION-TYPE
	OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	obsolete
	DESCRIPTION	"Error releasing staging area in shared memory.
			Trying to release nonexistent record; software error.
			Report Type: billing, Report Num: 22,
			Severity: info, Threshhold: 100, Throttle: 0;
			There are no details associated."
	REFERENCE	""
  ::=  {  billingTraps  22  }


errorReleasingBusyListEntryInSharedMemory	NOTIFICATION-TYPE
	OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	obsolete
	DESCRIPTION	"Error releasing busy list entry in shared memory.
			Trying to release nonexistent record; software error.
			Report Type: billing, Report Num: 23,
			Severity: info, Threshhold: 100, Throttle: 0;
			There are no details associated."
	REFERENCE	""
  ::=  {  billingTraps  23  }


updateTablePointerError	NOTIFICATION-TYPE
	OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	obsolete
	DESCRIPTION	"Update Table Pointer Error.
			SQL server is down.
			Wrong query supplied.
			Report Type: billing, Report Num: 24,
			Severity: warning, Threshhold: 100, Throttle: 0;
			There are no details associated."
	REFERENCE	""
  ::=  {  billingTraps  24  }


sharedMemoryUpdateFailed	NOTIFICATION-TYPE
	OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	obsolete
	DESCRIPTION	"Shared Memory update failed.
			The Shared Memory is full (maybe because EMS is down).
			Call Volume is very high. ( more than 200 calls per sec).
			Report Type: billing, Report Num: 26,
			Severity: major, Threshhold: 100, Throttle: 0;
			The details contain syntax in the form:
			Reason = value; EntryNumber = value."
	REFERENCE	""
  ::=  {  billingTraps  26  }


sharedMemoryEntryRemoveFailed	NOTIFICATION-TYPE
	OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	obsolete
	DESCRIPTION	"Shared Memory entry remove failed.
			Software Error, (maybe because the entry is not in shared memory).
			Report Type: billing, Report Num: 27,
			Severity: major, Threshhold: 100, Throttle: 0;
			The details contain syntax in the form:
			EntryNumber = value."
	REFERENCE	""
  ::=  {  billingTraps  27  }


wrongPortNumberSpecified	NOTIFICATION-TYPE
	OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	obsolete
	DESCRIPTION	"Wrong port number specified.
			Wrong Port Number specified in platform.cfg file
			Report Type: billing, Report Num: 28,
			Severity: major, Threshhold: 100, Throttle: 0;
			The details contain syntax in the form:
			PortNumber = value."
	REFERENCE	""
  ::=  {  billingTraps  28  }


cdbSendFailed	NOTIFICATION-TYPE
	OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	current
	DESCRIPTION	"CDB Send failed.
			TCP Send call failure
			Both the EMSs down
			Report Type: billing, Report Num: 29,
			Severity: major, Threshhold: 100, Throttle: 0;
			There are no details associated."
	REFERENCE	""
  ::=  {  billingTraps  29  }


domainNameMappingFailed	NOTIFICATION-TYPE
	OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	current
	DESCRIPTION	"Domain name mapping failed.
			Wrong DNS Name mapping specified in the cfg files
			Report Type: billing, Report Num: 30,
			Severity: major, Threshhold: 100, Throttle: 0;
			The details contain syntax in the form:
			Address = value."
	REFERENCE	""
  ::=  {  billingTraps  30  }


portNotSpecified	NOTIFICATION-TYPE
	OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	current
	DESCRIPTION	"Port not specified.
			Port not specified in platform.cfg
			Report Type: billing, Report Num: 31,
			Severity: major, Threshhold: 100, Throttle: 0;
			There are no details associated."
	REFERENCE	""
  ::=  {  billingTraps  31  }


emsAddressNotSpecified	NOTIFICATION-TYPE
	OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	current
	DESCRIPTION	"EMS address not specified.
			Either the primary or secondary EMS address has not been specified in the platform.cfg
			Report Type: billing, Report Num: 32,
			Severity: major, Threshhold: 100, Throttle: 0;
			There are no details associated."
	REFERENCE	""
  ::=  {  billingTraps  32  }


billingFTPParametersInvalid	NOTIFICATION-TYPE
	OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	current
	DESCRIPTION	"FTP/SFTP parameters invalid.
			The billing-acct-addr table is not fully provisioned with the information needed to perform file transfers.
			Report Type: billing, Report Num: 33,
			Severity: major, Threshhold: 100, Throttle: 0;
			The details contain syntax in the form:
			TransferType = value; BillingServerDir = value; 
			BillingServerAddr = value; User name = value."
	REFERENCE	""
  ::=  {  billingTraps  33  }


allBillingLinksAtCADown	NOTIFICATION-TYPE
	OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	obsolete
	DESCRIPTION	"All Billing Links at CA down.
			Cable has been pulled
			ifconfig down has been performed on the interfaces
			Report Type: billing, Report Num: 34,
			Severity: critical, Threshhold: 100, Throttle: 0;
			There are no details associated."
	REFERENCE	""
  ::=  {  billingTraps  34  }


allBillingLinksAtBillingServerDown	NOTIFICATION-TYPE
	OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	current
	DESCRIPTION	"All Billing Links at Billing Server down.
			cable connection might have been pulled out.
			'ifconfig down' might have been done on the interfaces
			Report Type: billing, Report Num: 35,
			Severity: critical, Threshhold: 100, Throttle: 0;
			There are no details associated."
	REFERENCE	""
  ::=  {  billingTraps  35  }


billingLinkRestored	NOTIFICATION-TYPE
	OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	current
	DESCRIPTION	"Billing Link Restored.
			cable has been restored
			Report Type: billing, Report Num: 36,
			Severity: info, Threshhold: 100, Throttle: 0;
			The details contain syntax in the form:
			Interface Name = value."
	REFERENCE	""
  ::=  {  billingTraps  36  }


billingLinkFailure	NOTIFICATION-TYPE
	OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	current
	DESCRIPTION	"Billing link failure.
			Cable may have been pulled
			'ifconfig down' may have been performed on the interface
			Report Type: billing, Report Num: 37,
			Severity: major, Threshhold: 100, Throttle: 0;
			The details contain syntax in the form:
			Interface name = value."
	REFERENCE	""
  ::=  {  billingTraps  37  }


emLogFileAccessError	NOTIFICATION-TYPE
	OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	current
	DESCRIPTION	"EM log file access error.
			System error-may be out of file descriptiors.
			Disk may be faulty.
			Report Type: billing, Report Num: 38,
			Severity: major, Threshhold: 50, Throttle: 0;
			The details contain syntax in the form:
			Type of access error = value; Reason for error = value;
			Sequence number of f = value; Index of event messa = value;
			Location tag = value."
	REFERENCE	""
  ::=  {  billingTraps  38  }


radiusAccountingReceiveFailure	NOTIFICATION-TYPE
	OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	current
	DESCRIPTION	"RADIUS Accounting receive failure.
			System error.
			Report Type: billing, Report Num: 39,
			Severity: minor, Threshhold: 25, Throttle: 0;
			The details contain syntax in the form:
			Location tag = value."
	REFERENCE	""
  ::=  {  billingTraps  39  }


emEncodeFailure	NOTIFICATION-TYPE
	OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	current
	DESCRIPTION	"EM encode failure.
			There is a problem with the format of the data to be sent to the RKS.
			Report Type: billing, Report Num: 40,
			Severity: minor, Threshhold: 100, Throttle: 0;
			The details contain syntax in the form:
			Location tag = value."
	REFERENCE	""
  ::=  {  billingTraps  40  }


messageContentError	NOTIFICATION-TYPE
	OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	current
	DESCRIPTION	"Message content error.
			There is a mismatch between what the sender populated in the message and what the receiver expects.
			Report Type: billing, Report Num: 41,
			Severity: minor, Threshhold: 100, Throttle: 0;
			The details contain syntax in the form:
			Message type = value; Field name = value;
			Field value (text) = value; Field value (numeric = value;
			Location tag = value."
	REFERENCE	""
  ::=  {  billingTraps  41  }


errorReadingProvisionedDataUsingDefault	NOTIFICATION-TYPE
	OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	current
	DESCRIPTION	"Error reading provisioned data-using default.
			Application was unable to read provisioned data, and had to resort to using default values.
			Report Type: billing, Report Num: 42,
			Severity: warning, Threshhold: 100, Throttle: 0;
			The details contain syntax in the form:
			Error code = value; Table name = value;
			Field name = value; Default value (decim = value;
			Default value (text) = value; Location tag = value."
	REFERENCE	""
  ::=  {  billingTraps  42  }


invalidBillingConfigurationProgramExiting	NOTIFICATION-TYPE
	OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	obsolete
	DESCRIPTION	"Invalid billing configuration-program exiting.
			The Call Agent is provisioned to have both
CDB billing and EM billing enabled,
or is provisioned to have no billing enabled.
			Report Type: billing, Report Num: 43,
			Severity: major, Threshhold: 50, Throttle: 0;
			The details contain syntax in the form:
			Field name = value; Table name = value;
			Location tag = value."
	REFERENCE	""
  ::=  {  billingTraps  43  }


rksSwitchOccurred	NOTIFICATION-TYPE
	OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	current
	DESCRIPTION	"RKS switch occurred.
			Billing changed the destination RKS for transmitting Event Messages. The change could have been triggered by a communication problem with an RKS, or by an attempt to reestablish RKS communication.
			Report Type: billing, Report Num: 44,
			Severity: major, Threshhold: 100, Throttle: 0;
			The details contain syntax in the form:
			Type of RKS switch = value; Location tag = value."
	REFERENCE	""
  ::=  {  billingTraps  44  }


eventMessageLogFileOpened	NOTIFICATION-TYPE
	OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	current
	DESCRIPTION	"Event Message log file opened.
			A log file has been created for the storage of Event Messages that cannot be transmitted to an RKS.
			Report Type: billing, Report Num: 45,
			Severity: minor, Threshhold: 50, Throttle: 0;
			The details contain syntax in the form:
			Element type = value; File name = value;
			Location tag = value."
	REFERENCE	""
  ::=  {  billingTraps  45  }


eventMessageLogFileClosed	NOTIFICATION-TYPE
	OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	current
	DESCRIPTION	"Event Message log file closed.
			An open Event Message log file has been closed.
			Report Type: billing, Report Num: 46,
			Severity: minor, Threshhold: 50, Throttle: 0;
			The details contain syntax in the form:
			Element type = value; File name = value;
			Location tag = value."
	REFERENCE	""
  ::=  {  billingTraps  46  }


rkssUnreachableFor1Hour	NOTIFICATION-TYPE
	OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	current
	DESCRIPTION	"RKSs unreachable for 1 hour.
			Billing has not been able to communicate with any RKS for the past one hour.
			Report Type: billing, Report Num: 47,
			Severity: minor, Threshhold: 25, Throttle: 0;
			The details contain syntax in the form:
			Location tag = value."
	REFERENCE	""
  ::=  {  billingTraps  47  }


rkssUnreachableFor3Hours	NOTIFICATION-TYPE
	OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	current
	DESCRIPTION	"RKSs unreachable for 3 hours.
			Billing has not been able to communicate with any RKS for the past three hours.
			Report Type: billing, Report Num: 48,
			Severity: major, Threshhold: 25, Throttle: 0;
			The details contain syntax in the form:
			Location tag = value."
	REFERENCE	""
  ::=  {  billingTraps  48  }


rkssUnreachableFor5Hours	NOTIFICATION-TYPE
	OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	current
	DESCRIPTION	"RKSs unreachable for 5 hours.
			Billing has not been able to communicate with any RKS for the past five hours.
			Report Type: billing, Report Num: 49,
			Severity: critical, Threshhold: 25, Throttle: 0;
			The details contain syntax in the form:
			Location tag = value."
	REFERENCE	""
  ::=  {  billingTraps  49  }


bdmsStoppedGeneratingNewBillingFile	NOTIFICATION-TYPE
	OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	current
	DESCRIPTION	"BDMS stopped generating new billing file.
			Call detail records are accumulating on the disk associated with the billing files in the EMS. This is because data is being written into the billing files faster than it is being forwarded to the Billing Mediation Server. FTP to the Billing Mediation Server may not be working. The maximum disk partition for billing has been exceeded or the maximum number of files has been exceeded.
			Report Type: billing, Report Num: 52,
			Severity: critical, Threshhold: 100, Throttle: 0;
			There are no details associated."
	REFERENCE	""
  ::=  {  billingTraps  52  }


eventMessageDiskSpace50PercentFull	NOTIFICATION-TYPE
	OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	current
	DESCRIPTION	"Event Message disk space 50 percent full.
			Event Message storage has reached 50% of the maximum storage allowed.
			Report Type: billing, Report Num: 53,
			Severity: minor, Threshhold: 100, Throttle: 0;
			The details contain syntax in the form:
			Number of megabytes used for Eve = value; Directory containing Event Messa = value;
			Location tag = value."
	REFERENCE	""
  ::=  {  billingTraps  53  }


eventMessageDiskSpace70PercentFull	NOTIFICATION-TYPE
	OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	current
	DESCRIPTION	"Event Message disk space 70 percent full.
			Event Message storage has reached 70% of the maximum storage allowed.
			Report Type: billing, Report Num: 54,
			Severity: major, Threshhold: 100, Throttle: 0;
			The details contain syntax in the form:
			Number of megabytes used for Eve = value; Directory containing Event Messa = value;
			Location tag = value."
	REFERENCE	""
  ::=  {  billingTraps  54  }


eventMessageDiskSpace100PercentFull	NOTIFICATION-TYPE
	OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	current
	DESCRIPTION	"Event Message disk space 100 percent full.
			Event Message storage has been completely filled.  No additional Event Messages will be written to disk until more space is made available.
			Report Type: billing, Report Num: 55,
			Severity: critical, Threshhold: 100, Throttle: 0;
			The details contain syntax in the form:
			Number of megabytes used for Eve = value; Directory containing Event Messa = value;
			Location tag = value."
	REFERENCE	""
  ::=  {  billingTraps  55  }


billingDataCorruptionDetected	NOTIFICATION-TYPE
	OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	current
	DESCRIPTION	"Billing data corruption detected.
			Billing data stored on disk may have become corrupted due to a power outage, ungraceful shutdown, or disk failure.
			Report Type: billing, Report Num: 56,
			Severity: critical, Threshhold: 100, Throttle: 0;
			The details contain syntax in the form:
			File/table that may be corrupt = value; Low end of the range of records = value;
			High end of the range of records = value; Error code = value;
			Location tag = value."
	REFERENCE	""
  ::=  {  billingTraps  56  }


noRouteAvailableForCalledNumber	NOTIFICATION-TYPE
	OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	current
	DESCRIPTION	"No Route Available for Called Number.
			Call originates from a subscriber or trunk for a called party number that has no route available.
			Parameter(s) in the subscriber and/or dial-plan table are missing or incorrect for this dialed number
			Report Type: callp, Report Num: 8,
			Severity: warning, Threshhold: 100, Throttle: 500;
			The details contain syntax in the form:
			Orig Type(Trunk or S = value; Orig Sub or TG id = value;
			Calling Party Number = value; Called Party Number = value."
	REFERENCE	""
  ::=  {  callpTraps  8  }


noRouteAvailableForCarrierDialed	NOTIFICATION-TYPE
	OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	current
	DESCRIPTION	"No Route Available for Carrier Dialed.
			No route is available for the interexchange carrier (IXC) dialed.
			Parameter(s) in the carrier and/or route-grp table are missing or incorrect for the carrier.
			Report Type: callp, Report Num: 9,
			Severity: info, Threshhold: 100, Throttle: 0;
			The details contain syntax in the form:
			Orig Type(Trunk or S = value; Orig Sub or TG id = value;
			Calling Party Number = value; Called Party Number = value;
			Carrier Code Dialed = value."
	REFERENCE	""
  ::=  {  callpTraps  9  }


featureServerOneLinkDown	NOTIFICATION-TYPE
	OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	current
	DESCRIPTION	"Feature Server one link down.
			Hardware Broken
			Report Type: callp, Report Num: 11,
			Severity: minor, Threshhold: 100, Throttle: 0;
			The details contain syntax in the form:
			Interface Name = value; Interface IP Address = value."
	REFERENCE	""
  ::=  {  callpTraps  11  }


featureServerBothLinksDown	NOTIFICATION-TYPE
	OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	current
	DESCRIPTION	"Feature Server Both links down.
			Hardware Broken
			Report Type: callp, Report Num: 12,
			Severity: critical, Threshhold: 100, Throttle: 0;
			The details contain syntax in the form:
			Interface Name = value; Interface IP Address = value;
			Interface Name = value; Interface IP Address = value."
	REFERENCE	""
  ::=  {  callpTraps  12  }


nasCRCXError	NOTIFICATION-TYPE
	OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	current
	DESCRIPTION	"NAS CRCX error.
			Preauthentication failure
			Report Type: callp, Report Num: 13,
			Severity: info, Threshhold: 100, Throttle: 0;
			There are no details associated."
	REFERENCE	""
  ::=  {  callpTraps  13  }


nasAuthenticationFailure	NOTIFICATION-TYPE
	OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	current
	DESCRIPTION	"NAS Authentication Failure.
			AAA Server denied the request
			Report Type: callp, Report Num: 14,
			Severity: info, Threshhold: 100, Throttle: 0;
			There are no details associated."
	REFERENCE	""
  ::=  {  callpTraps  14  }


cmtsERIDNotFoundInMGWTable	NOTIFICATION-TYPE
	OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	current
	DESCRIPTION	"CMTS ER ID Not found in MGW table.
			CMTS/ER Entry not found in Media gateway table
			Report Type: callp, Report Num: 15,
			Severity: info, Threshhold: 100, Throttle: 0;
			The details contain syntax in the form:
			MGW-NAME = value."
	REFERENCE	""
  ::=  {  callpTraps  15  }


routeIndexHasNoTrunkGroupAssigned	NOTIFICATION-TYPE
	OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	current
	DESCRIPTION	"Route Index has no Trunk Group Assigned.
			A trunk group was not assigned to the given route.
			Report Type: callp, Report Num: 16,
			Severity: warning, Threshhold: 100, Throttle: 0;
			The details contain syntax in the form:
			Route Index = value."
	REFERENCE	""
  ::=  {  callpTraps  16  }


invalidRouteIndexUsed	NOTIFICATION-TYPE
	OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	current
	DESCRIPTION	"Invalid Route Index Used.
			An invalid route index was used.
			Report Type: callp, Report Num: 17,
			Severity: warning, Threshhold: 100, Throttle: 0;
			The details contain syntax in the form:
			Route Index = value."
	REFERENCE	""
  ::=  {  callpTraps  17  }


unableToPlayAnnouncement	NOTIFICATION-TYPE
	OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	current
	DESCRIPTION	"Unable to Play Announcement.
			Announcement was not provisioned correctly.
			Report Type: callp, Report Num: 18,
			Severity: warning, Threshhold: 100, Throttle: 0;
			The details contain syntax in the form:
			Announcement Index = value."
	REFERENCE	""
  ::=  {  callpTraps  18  }


callRoutedToUnprovisionedSubscriber	NOTIFICATION-TYPE
	OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	current
	DESCRIPTION	"Call Routed to Unprovisioned Subscriber.
			Subscriber was not provisioned correctly.
			Report Type: callp, Report Num: 19,
			Severity: warning, Threshhold: 100, Throttle: 0;
			The details contain syntax in the form:
			Subscriber Index = value; Directory Number Dia = value."
	REFERENCE	""
  ::=  {  callpTraps  19  }


noRouteOrTrunkGroupAvailableToRouteCall	NOTIFICATION-TYPE
	OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	current
	DESCRIPTION	"No Route or Trunk Group available to route call.
			Trunk Group was not provisioned correctly in route.
			Report Type: callp, Report Num: 20,
			Severity: warning, Threshhold: 100, Throttle: 0;
			The details contain syntax in the form:
			Calling Number = value; Called Number = value;
			Route Index = value; Trunk Group ID = value."
	REFERENCE	""
  ::=  {  callpTraps  20  }


callReleasedDueToMaximumHopCountsExceeded	NOTIFICATION-TYPE
	OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	current
	DESCRIPTION	"Call Released due to maximum hop counts exceeded.
			Hops between destinations is excessive.
			Report Type: callp, Report Num: 21,
			Severity: warning, Threshhold: 100, Throttle: 0;
			The details contain syntax in the form:
			Calling Number = value; Called Number = value;
			Hop Count = value."
	REFERENCE	""
  ::=  {  callpTraps  21  }


trunkGroupIndexReadFailure	NOTIFICATION-TYPE
	OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	current
	DESCRIPTION	"Trunk Group Index Read Failure.
			Trunk Group Index could not be retrieved from call_data.
			Report Type: callp, Report Num: 22,
			Severity: warning, Threshhold: 100, Throttle: 0;
			The details contain syntax in the form:
			Trunk Group Index = value; Call Index = value."
	REFERENCE	""
  ::=  {  callpTraps  22  }


routingErrorTerminationIsNotASubscriber	NOTIFICATION-TYPE
	OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	current
	DESCRIPTION	"Routing Error: Termination is not a subscriber.
			Destination Termination is not provisioned as a Subscriber.
			Report Type: callp, Report Num: 23,
			Severity: warning, Threshhold: 100, Throttle: 0;
			The details contain syntax in the form:
			Termination Index = value; Termination Type = value."
	REFERENCE	""
  ::=  {  callpTraps  23  }


invalidRouteForSubscriberIndex	NOTIFICATION-TYPE
	OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	current
	DESCRIPTION	"Invalid Route for Subscriber Index.
			Route is not provisioned correctly for specified subscriber.
			Report Type: callp, Report Num: 24,
			Severity: warning, Threshhold: 100, Throttle: 0;
			The details contain syntax in the form:
			Route = value; Subscriber Index = value."
	REFERENCE	""
  ::=  {  callpTraps  24  }


invalidRouteGroupForSubscriberRouting	NOTIFICATION-TYPE
	OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	current
	DESCRIPTION	"Invalid Route Group for Subscriber Routing.
			Route Group is not provisioned correctly for specified subscriber.
			Report Type: callp, Report Num: 25,
			Severity: warning, Threshhold: 100, Throttle: 0;
			The details contain syntax in the form:
			Route = value; Subscriber Index = value."
	REFERENCE	""
  ::=  {  callpTraps  25  }


invalidTrunkGroupForSubscriberRouting	NOTIFICATION-TYPE
	OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	current
	DESCRIPTION	"Invalid Trunk Group for Subscriber Routing.
			Trunk Group is not provisioned correctly for specified subscriber.
			Report Type: callp, Report Num: 26,
			Severity: warning, Threshhold: 100, Throttle: 0;
			The details contain syntax in the form:
			Trunk Group Index = value; Subscriber Index = value."
	REFERENCE	""
  ::=  {  callpTraps  26  }


unableToRouteBlockedByDestinationSubscriberStatus	NOTIFICATION-TYPE
	OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	current
	DESCRIPTION	"Unable to Route: Blocked by Destination Subscriber Status.
			Subscriber is not in the correct state.
			Report Type: callp, Report Num: 27,
			Severity: warning, Threshhold: 100, Throttle: 0;
			The details contain syntax in the form:
			Subscriber Index = value; Subscriber Status = value."
	REFERENCE	""
  ::=  {  callpTraps  27  }


routeNameDoesNotExist	NOTIFICATION-TYPE
	OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	current
	DESCRIPTION	"Route Name does not exist.
			Route is not correctly provisioned.
			Report Type: callp, Report Num: 28,
			Severity: warning, Threshhold: 100, Throttle: 0;
			The details contain syntax in the form:
			Route Name = value."
	REFERENCE	""
  ::=  {  callpTraps  28  }


routingSelectionFailure	NOTIFICATION-TYPE
	OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	current
	DESCRIPTION	"Routing Selection Failure.
			Route is not correctly provisioned.
			Report Type: callp, Report Num: 29,
			Severity: warning, Threshhold: 100, Throttle: 0;
			The details contain syntax in the form:
			Route Index = value; Calling Number = value;
			Called Number = value."
	REFERENCE	""
  ::=  {  callpTraps  29  }


cotTestFailed	NOTIFICATION-TYPE
	OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	current
	DESCRIPTION	"COT Test Failed.
			COT test has failed.
			Report Type: callp, Report Num: 30,
			Severity: warning, Threshhold: 100, Throttle: 0;
			The details contain syntax in the form:
			Termination Index = value."
	REFERENCE	""
  ::=  {  callpTraps  30  }


callAuthorizationFailure	NOTIFICATION-TYPE
	OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	current
	DESCRIPTION	"Call Authorization Failure.
			Due to provisioning the call cannot be completed.
			Report Type: callp, Report Num: 31,
			Severity: warning, Threshhold: 100, Throttle: 0;
			The details contain syntax in the form:
			Calling Number = value; Called Number = value."
	REFERENCE	""
  ::=  {  callpTraps  31  }


countryCodeDialingPlanError	NOTIFICATION-TYPE
	OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	current
	DESCRIPTION	"Country Code Dialing Plan Error.
			The country code was not found in the Dial Plan
			Report Type: callp, Report Num: 32,
			Severity: warning, Threshhold: 100, Throttle: 0;
			The details contain syntax in the form:
			Called Number = value; Dial Plan Index = value."
	REFERENCE	""
  ::=  {  callpTraps  32  }


invalidCall	NOTIFICATION-TYPE
	OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	current
	DESCRIPTION	"Invalid Call.
			The Call could not be completed because the number entered was invalid
			Report Type: callp, Report Num: 33,
			Severity: warning, Threshhold: 100, Throttle: 0;
			The details contain syntax in the form:
			Calling Number = value; Called Number = value."
	REFERENCE	""
  ::=  {  callpTraps  33  }


dialPlanInformationNotFoundForDigitsReceived	NOTIFICATION-TYPE
	OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	current
	DESCRIPTION	"Dial Plan Information not found for digits received.
			The Call could not be completed because the number entered could not be located in the dial-plan.
			Report Type: callp, Report Num: 34,
			Severity: warning, Threshhold: 100, Throttle: 0;
			The details contain syntax in the form:
			Calling Number = value; Called Number = value;
			Dial Plan Index = value."
	REFERENCE	""
  ::=  {  callpTraps  34  }


dialPlanInformationForTestCallNotFound	NOTIFICATION-TYPE
	OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	current
	DESCRIPTION	"Dial Plan Information for Test Call not found.
			The Test Call could not be completed because the number entered could not be located in the dial-plan.
			Report Type: callp, Report Num: 35,
			Severity: warning, Threshhold: 100, Throttle: 0;
			The details contain syntax in the form:
			Dial Plan Index = value."
	REFERENCE	""
  ::=  {  callpTraps  35  }


invalidOrUnknownNOA	NOTIFICATION-TYPE
	OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	current
	DESCRIPTION	"Invalid or Unknown NOA.
			The NOA was incorrect in the dial-plan.
			Report Type: callp, Report Num: 36,
			Severity: warning, Threshhold: 100, Throttle: 0;
			The details contain syntax in the form:
			NOA Received = value; Calling Number = value;
			Called Number = value."
	REFERENCE	""
  ::=  {  callpTraps  36  }


callFailure	NOTIFICATION-TYPE
	OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	current
	DESCRIPTION	"Call Failure.
			The Call failed for the listed indication.
			Report Type: callp, Report Num: 37,
			Severity: warning, Threshhold: 100, Throttle: 0;
			The details contain syntax in the form:
			Type of Call = value; Calling Number = value;
			Called Number = value; Failure Indication = value."
	REFERENCE	""
  ::=  {  callpTraps  37  }


releaseCause25ExchangeRoutingErrorReceived	NOTIFICATION-TYPE
	OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	current
	DESCRIPTION	"Release Cause 25 Exchange Routing Error Received.
			Received REL w/cause
#25
			Report Type: callp, Report Num: 38,
			Severity: minor, Threshhold: 100, Throttle: 0;
			The details contain syntax in the form:
			CIC = value; TGN-ID = value;
			DPC = value; OPC = value."
	REFERENCE	""
  ::=  {  callpTraps  38  }


testCallBlockedDueToCongestionOrIsolation	NOTIFICATION-TYPE
	OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	current
	DESCRIPTION	"Test call blocked due to congestion or isolation.
			IAM for test call blocked due to congestion/isolation. GR-317 1999 R3-214
			Report Type: callp, Report Num: 39,
			Severity: warning, Threshhold: 100, Throttle: 0;
			The details contain syntax in the form:
			cic = value; tgn-id = value;
			dpc = value; opc = value."
	REFERENCE	""
  ::=  {  callpTraps  39  }


signalingMGAWronglyConfiguredDomainName	NOTIFICATION-TYPE
	OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	current
	DESCRIPTION	"Signaling MGA wrongly configured domain name..
			Domain name is invalid.
			(Atleast)half of the local machine address does not match MGCP domain name.
			Report Type: config, Report Num: 2,
			Severity: info, Threshhold: 1, Throttle: 1;
			The details contain syntax in the form:
			configured domain na = value; cause = value."
	REFERENCE	""
  ::=  {  configTraps  2  }


kamMateConfigurationError	NOTIFICATION-TYPE
	OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	current
	DESCRIPTION	"KAM: Mate configuration error.
			Mate and local are configured to be of same side.
			Mate is configured with wrong mate Red DNS name.
			Mate Red. DNS entries are changed.
			Report Type: config, Report Num: 3,
			Severity: major, Threshhold: 100, Throttle: 0;
			The details contain syntax in the form:
			Reason = value."
	REFERENCE	""
  ::=  {  configTraps  3  }


configurationError	NOTIFICATION-TYPE
	OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	current
	DESCRIPTION	"Configuration Error.
			wrong configuration in the platform.cfg
			Report Type: config, Report Num: 4,
			Severity: critical, Threshhold: 100, Throttle: 0;
			The details contain syntax in the form:
			Reason = value."
	REFERENCE	""
  ::=  {  configTraps  4  }


dbmUpdateFailureMasterSlaveDatabaseOutOfSynch	NOTIFICATION-TYPE
	OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	current
	DESCRIPTION	"DBM Update Failure: Master/Slave Database out of synch.
			The master database under Oracle control in the EMS was successfully updated, but the subsequent update of the shared memory tables in the CA(s) and/or FS(s) were not properly updated.
			Report Type: database, Report Num: 2,
			Severity: warning, Threshhold: 100, Throttle: 0;
			The details contain syntax in the form:
			Error Code = value; Error String = value;
			Provisioning String = value."
	REFERENCE	""
  ::=  {  databaseTraps  2  }


thereAreErrorsInEMSDatabaseDefErrorQueueContactDBA	NOTIFICATION-TYPE
	OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	current
	DESCRIPTION	"There are errors in EMS database DefError queue; contact DBA.
			Replication data conflicts.
			Update/delete on non-existing data.
			Unique constraint (Primary key) violated.
			Report Type: database, Report Num: 3,
			Severity: critical, Threshhold: 100, Throttle: 0;
			The details contain syntax in the form:
			HostName = value; DatabaseName = value;
			ErrorCount = value; TimeStamp = value."
	REFERENCE	""
  ::=  {  databaseTraps  3  }


emsDbHeartBeatReplicationPUSHJobBroken	NOTIFICATION-TYPE
	OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	current
	DESCRIPTION	"EMS db_heart_beat: replication PUSH job broken.
			Remote database is not accessible.
			Remote database is down.
			Remote Oracle Listener process died.
			Network connection is broken.
			Report Type: database, Report Num: 4,
			Severity: critical, Threshhold: 100, Throttle: 0;
			The details contain syntax in the form:
			HostName = value; LocalDatabase = value;
			RemoteDatabase = value; Job = value;
			TimeStamp = value."
	REFERENCE	""
  ::=  {  databaseTraps  4  }


emsDbHeartBeatProcessDied	NOTIFICATION-TYPE
	OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	current
	DESCRIPTION	"EMS db_heart_beat process died..
			Unknown
			Report Type: database, Report Num: 5,
			Severity: critical, Threshhold: 100, Throttle: 0;
			The details contain syntax in the form:
			HostName = value; DatabaseName = value;
			TimeStamp = value."
	REFERENCE	""
  ::=  {  databaseTraps  5  }


emsDatabaseReplicationDefTranDestQueueOverloaded	NOTIFICATION-TYPE
	OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	current
	DESCRIPTION	"EMS database replication DefTranDest queue overloaded.
			Replication PUSH job is broken.
			Remote database is not accessible.
			Database is overloaded.
			Report Type: database, Report Num: 6,
			Severity: major, Threshhold: 100, Throttle: 0;
			The details contain syntax in the form:
			HostName = value; DatabaseName = value;
			Threshold = value; TimeStamp = value."
	REFERENCE	""
  ::=  {  databaseTraps  6  }


emsDatabaseDefTranQueueIsOverloaded	NOTIFICATION-TYPE
	OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	current
	DESCRIPTION	"EMS database DefTran queue is overloaded.
			Replication DefTranDest queue is overloaded.
			Too many errors in DefError queue.
			Replication PURGE job is broken or overloaded.
			Report Type: database, Report Num: 7,
			Severity: minor, Threshhold: 100, Throttle: 0;
			The details contain syntax in the form:
			HostName = value; DatabaseName = value;
			Threshold = value; TimeStamp = value."
	REFERENCE	""
  ::=  {  databaseTraps  7  }


emsDatabaseTablespaceIsOutOfFreeSpace	NOTIFICATION-TYPE
	OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	current
	DESCRIPTION	"EMS database tablespace is out of free space..
			Increased data volume or transactions.
			Report Type: database, Report Num: 8,
			Severity: major, Threshhold: 100, Throttle: 0;
			The details contain syntax in the form:
			Hostname = value; DatabaseName = value;
			TablespaceName = value; TotalFreeSpace = value;
			TimeStamp = value."
	REFERENCE	""
  ::=  {  databaseTraps  8  }


urgentEMSDatabaseArchiveLogDirectoryIsGettingFull	NOTIFICATION-TYPE
	OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	current
	DESCRIPTION	"URGENT: EMS database archive log directory is getting full!.
			Transaction volume increased.
			Report Type: database, Report Num: 9,
			Severity: critical, Threshhold: 100, Throttle: 0;
			The details contain syntax in the form:
			HostName = value; DatabaseName = value;
			DirectoryName = value; FreeSpace = value;
			TimeStamp = value."
	REFERENCE	""
  ::=  {  databaseTraps  9  }


emsDatabaseBackupFails	NOTIFICATION-TYPE
	OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	current
	DESCRIPTION	"EMS database: Backup fails.
			System or hardware unstable.
			Report Type: database, Report Num: 10,
			Severity: major, Threshhold: 100, Throttle: 0;
			The details contain syntax in the form:
			HostName = value; DatabaseName = value;
			Message1 = value; Message2 = value;
			TimeStamp = value."
	REFERENCE	""
  ::=  {  databaseTraps  10  }


emsDatabaseAlertlogAlerts	NOTIFICATION-TYPE
	OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	current
	DESCRIPTION	"EMS database alert.log alerts..
			Unknown
			Report Type: database, Report Num: 11,
			Severity: major, Threshhold: 100, Throttle: 0;
			The details contain syntax in the form:
			HostName = value; DatabaseName = value;
			Message1 = value; Message2 = value;
			TimeStamp = value."
	REFERENCE	""
  ::=  {  databaseTraps  11  }


emsDatabaseProcessDied	NOTIFICATION-TYPE
	OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	current
	DESCRIPTION	"EMS database process died.
			Possible Error Source: 1. Process Name, if local process is not running. 2. 'Cannot_connect_database' if local DB is unreachable. 3. 'Cannot_connect_' if remote DB is unreachable.
			Report Type: database, Report Num: 12,
			Severity: critical, Threshhold: 100, Throttle: 0;
			The details contain syntax in the form:
			HostName = value; DatabaseName = value;
			ErrorSource = value; Message = value;
			TimeStamp = value."
	REFERENCE	""
  ::=  {  databaseTraps  12  }


emsDatabasePerformanceAlert	NOTIFICATION-TYPE
	OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	current
	DESCRIPTION	"EMS database performance alert..
			See StatEvenName
			Report Type: database, Report Num: 13,
			Severity: major, Threshhold: 100, Throttle: 0;
			The details contain syntax in the form:
			HostName = value; DatabaseName = value;
			StatEventName = value; Value1 = value;
			Value2 = value; Message = value;
			TimeStamp = value."
	REFERENCE	""
  ::=  {  databaseTraps  13  }


tableSizeExceedsMinorThresholdLimit	NOTIFICATION-TYPE
	OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	current
	DESCRIPTION	"Table Size Exceeds Minor Threshold Limit.
			The pre-provisioned size for the stated table is nearing the licensed limit on the number of entries it can hold
			Report Type: database, Report Num: 14,
			Severity: minor, Threshhold: 100, Throttle: 0;
			The details contain syntax in the form:
			TableName = value."
	REFERENCE	""
  ::=  {  databaseTraps  14  }


tableSizeExceedsMajorThresholdLimit	NOTIFICATION-TYPE
	OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	current
	DESCRIPTION	"Table Size Exceeds Major Threshold Limit.
			Major threshold limit exceeded
			Report Type: database, Report Num: 15,
			Severity: major, Threshhold: 100, Throttle: 0;
			The details contain syntax in the form:
			TableName = value."
	REFERENCE	""
  ::=  {  databaseTraps  15  }


tableSizeExceedsCriticalThresholdLimit	NOTIFICATION-TYPE
	OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	current
	DESCRIPTION	"Table Size Exceeds Critical Threshold Limit.
			Critical threshold limit exceeded
			Report Type: database, Report Num: 16,
			Severity: critical, Threshhold: 100, Throttle: 0;
			The details contain syntax in the form:
			TableName = value."
	REFERENCE	""
  ::=  {  databaseTraps  16  }


dataReplicationFailed	NOTIFICATION-TYPE
	OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	current
	DESCRIPTION	"Data replication failed.
			index out of range
			record size mismatch
			Report Type: database, Report Num: 17,
			Severity: major, Threshhold: 100, Throttle: 0;
			The details contain syntax in the form:
			Replication-stage = value; Table Name = value;
			Index = value; Table id = value."
	REFERENCE	""
  ::=  {  databaseTraps  17  }


unexpectedRuntimeDataInteraction	NOTIFICATION-TYPE
	OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	current
	DESCRIPTION	"Unexpected runtime data interaction.
			Unexpected data interaction has been detected at runtime in the call agent or feature server.
			Report Type: database, Report Num: 18,
			Severity: warning, Threshhold: 100, Throttle: 0;
			The details contain syntax in the form:
			Internal/External In = value; Table Name = value;
			Table Entry = value; Table Field Name = value;
			Descriptive Data1 = value; Descriptive Data2 = value;
			Descriptive Data3 = value; Descriptive Data4 = value."
	REFERENCE	""
  ::=  {  databaseTraps  18  }


dailyDatabaseBackupCompletedSuccessfully	NOTIFICATION-TYPE
	OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	current
	DESCRIPTION	"Daily database backup completed successfully.
			Normal operaton
			None
			None
			None
			Report Type: database, Report Num: 19,
			Severity: info, Threshhold: 0, Throttle: 0;
			The details contain syntax in the form:
			HOSTNAME = value; ORACLE_SID = value;
			PROCESS = value; Message1 = value;
			Message2 = value; Message3 = value."
	REFERENCE	""
  ::=  {  databaseTraps  19  }


replicationDataFlushTimeoutDuringSwitchover	NOTIFICATION-TYPE
	OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	current
	DESCRIPTION	"Replication data flush timeout during switchover.
			Replication Module software problem
			Report Type: database, Report Num: 20,
			Severity: major, Threshhold: 100, Throttle: 0;
			The details contain syntax in the form:
			Tables failed = value."
	REFERENCE	""
  ::=  {  databaseTraps  20  }


reportThresholdExceeded	NOTIFICATION-TYPE
	OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	current
	DESCRIPTION	"Report Threshold Exceeded.
			Issu d when the threshold for a given report type and number is exceeded.
			Report Type: maintenance, Report Num: 2,
			Severity: info, Threshhold: 0, Throttle: 0;
			The details contain syntax in the form:
			Report Type = value; Report Number = value;
			Threshold Level = value."
	REFERENCE	""
  ::=  {  maintenanceTraps  2  }


kamLocalSideHasBecomeFaulty	NOTIFICATION-TYPE
	OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	current
	DESCRIPTION	"KAM: Local Side has become Faulty.
			Can result from maintenance report 5, 6, 9, 10, 19, 20.
			Manually shutting down the system using platform stop command.
			Report Type: maintenance, Report Num: 3,
			Severity: major, Threshhold: 100, Throttle: 0;
			The details contain syntax in the form:
			Local State = value; Mate State = value;
			Reason = value; Probable cause = value."
	REFERENCE	""
  ::=  {  maintenanceTraps  3  }


kamMateSideHasBecomeFaulty	NOTIFICATION-TYPE
	OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	current
	DESCRIPTION	"KAM: Mate Side has become Faulty.
			Local side has detected the mate side going to faulty state.
			Report Type: maintenance, Report Num: 4,
			Severity: major, Threshhold: 100, Throttle: 0;
			The details contain syntax in the form:
			Local State = value; Mate State = value;
			Reason = value; Probable cause = value;
			Mate Ping = value."
	REFERENCE	""
  ::=  {  maintenanceTraps  4  }


kamChangeoverFailure	NOTIFICATION-TYPE
	OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	current
	DESCRIPTION	"KAM: Changeover Failure.
			Issued when changing from an active processor to a standby and the changeover fails.
			This alarm is usually caused by a software problem on the specific platform identified in the alarm report.
			Report Type: maintenance, Report Num: 5,
			Severity: major, Threshhold: 100, Throttle: 0;
			The details contain syntax in the form:
			Local State = value; Mate State = value."
	REFERENCE	""
  ::=  {  maintenanceTraps  5  }


kamChangeoverTimeout	NOTIFICATION-TYPE
	OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	current
	DESCRIPTION	"KAM: Changeover Timeout.
			System failed to changeover within time period. Soon after this event is issued, one platform will go to faulty state.
			This alarm is usually caused by a software problem on the specific platform identified in the alarm report.
			Report Type: maintenance, Report Num: 6,
			Severity: major, Threshhold: 100, Throttle: 0;
			The details contain syntax in the form:
			Local State = value; Mate State = value."
	REFERENCE	""
  ::=  {  maintenanceTraps  6  }


kamMateRejectedChangeover	NOTIFICATION-TYPE
	OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	current
	DESCRIPTION	"KAM: Mate Rejected Changeover.
			Mate is not yet in stable state.
			Mate detects itself faulty during changeover and then rejects changeover. Note: This attempted changeover could be caused by a forced (operator) switch, or could be caused by secondary instance rejecting changeover as primary is being brought up.
			Report Type: maintenance, Report Num: 7,
			Severity: major, Threshhold: 100, Throttle: 0;
			The details contain syntax in the form:
			Local State = value; Mate State = value."
	REFERENCE	""
  ::=  {  maintenanceTraps  7  }


kamMateChangeoverTimeout	NOTIFICATION-TYPE
	OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	current
	DESCRIPTION	"KAM: Mate Changeover Timeout.
			Faulty mate.
			Report Type: maintenance, Report Num: 8,
			Severity: major, Threshhold: 100, Throttle: 0;
			The details contain syntax in the form:
			Local State = value; Mate State = value."
	REFERENCE	""
  ::=  {  maintenanceTraps  8  }


kamLocalInitializationFailure	NOTIFICATION-TYPE
	OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	current
	DESCRIPTION	"KAM: Local Initialization Failure.
			Local initialization has failed.
			Report Type: maintenance, Report Num: 9,
			Severity: major, Threshhold: 100, Throttle: 0;
			The details contain syntax in the form:
			Local State = value; Mate State = value."
	REFERENCE	""
  ::=  {  maintenanceTraps  9  }


kamLocalInitializationTimeout	NOTIFICATION-TYPE
	OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	current
	DESCRIPTION	"KAM: Local Initialization Timeout.
			Local initialization has timed out.
			When the event report is issued, the system has failed and the re-initialization process has failed.
			Report Type: maintenance, Report Num: 10,
			Severity: major, Threshhold: 100, Throttle: 0;
			The details contain syntax in the form:
			Local State = value; Mate State = value."
	REFERENCE	""
  ::=  {  maintenanceTraps  10  }


switchoverComplete	NOTIFICATION-TYPE
	OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	current
	DESCRIPTION	"Switchover Complete.
			Acknowledges that the changeover successfully completed.
			Report Type: maintenance, Report Num: 11,
			Severity: info, Threshhold: 100, Throttle: 0;
			The details contain syntax in the form:
			Local State = value; Mate State = value."
	REFERENCE	""
  ::=  {  maintenanceTraps  11  }


kamInitializationSuccessful	NOTIFICATION-TYPE
	OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	current
	DESCRIPTION	"KAM: Initialization Successful.
			Initiates a local initialization that is successful.
			Report Type: maintenance, Report Num: 12,
			Severity: info, Threshhold: 100, Throttle: 0;
			The details contain syntax in the form:
			Local State = value; Mate State = value."
	REFERENCE	""
  ::=  {  maintenanceTraps  12  }


adminStateChange	NOTIFICATION-TYPE
	OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	current
	DESCRIPTION	"Admin State Change.
			The administrative state of a managed resource has changed
			Report Type: maintenance, Report Num: 13,
			Severity: info, Threshhold: 100, Throttle: 0;
			The details contain syntax in the form:
			Facility Type = value; Facility Id = value;
			Initial Admin State = value; Target Admin State = value;
			Current Admin State = value."
	REFERENCE	""
  ::=  {  maintenanceTraps  13  }


callAgentAdminStateChange	NOTIFICATION-TYPE
	OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	current
	DESCRIPTION	"Call Agent Admin State Change.
			Informational:Indicates that call agent has changed operational state as a result of a manual switchover (control command in CLI).
			Report Type: maintenance, Report Num: 14,
			Severity: info, Threshhold: 100, Throttle: 0;
			The details contain syntax in the form:
			Call Agent Id = value; Current Local State = value;
			Current Mate State = value."
	REFERENCE	""
  ::=  {  maintenanceTraps  14  }


featureServerAdminStateChange	NOTIFICATION-TYPE
	OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	current
	DESCRIPTION	"Feature Server Admin State Change.
			Informational: Indicates that call agent has changed operational state as a result of a manual switchover (control command in CLI).
			Report Type: maintenance, Report Num: 15,
			Severity: info, Threshhold: 100, Throttle: 0;
			The details contain syntax in the form:
			Feature Server Id = value; Feature Server Type = value;
			Current Local State = value; Current Mate State = value."
	REFERENCE	""
  ::=  {  maintenanceTraps  15  }


pmgStartingProcess	NOTIFICATION-TYPE
	OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	current
	DESCRIPTION	"PMG: Starting Process.
			Informational:process is being started as system is being brought up.
			Report Type: maintenance, Report Num: 16,
			Severity: info, Threshhold: 100, Throttle: 0;
			The details contain syntax in the form:
			Process Name = value; Restart Type = value;
			Restart Mode = value; Process Group = value."
	REFERENCE	""
  ::=  {  maintenanceTraps  16  }


invalidEventReportReceived	NOTIFICATION-TYPE
	OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	current
	DESCRIPTION	"Invalid Event Report Received.
			Indicates that a process has sent an Event Report that cannot be found in the database.
			Report Type: maintenance, Report Num: 17,
			Severity: info, Threshhold: 100, Throttle: 0;
			The details contain syntax in the form:
			Report Type = value; ReportNumber = value;
			Validation Failure = value."
	REFERENCE	""
  ::=  {  maintenanceTraps  17  }


pmgProcessHasDied	NOTIFICATION-TYPE
	OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	current
	DESCRIPTION	"PMG: Process has Died.
			Software problem.
			Report Type: maintenance, Report Num: 18,
			Severity: minor, Threshhold: 100, Throttle: 0;
			The details contain syntax in the form:
			Process Name = value; Process Group = value."
	REFERENCE	""
  ::=  {  maintenanceTraps  18  }


pmgProcessExceededRestartRate	NOTIFICATION-TYPE
	OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	current
	DESCRIPTION	"PMG: Process Exceeded Restart Rate.
			This alarm is usually caused by a software problem on the specific platform identified in the alarm report. Soon after this event is issued, one platform will go to faulty state.
			Report Type: maintenance, Report Num: 19,
			Severity: major, Threshhold: 100, Throttle: 0;
			The details contain syntax in the form:
			Process Name = value; Restart Rate = value;
			Process Group = value."
	REFERENCE	""
  ::=  {  maintenanceTraps  19  }


kamLostKAMConnectionToMate	NOTIFICATION-TYPE
	OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	current
	DESCRIPTION	"KAM: Lost KAM Connection to Mate.
			Network interface hardware problem.
			Router problem.
			Soon after this event is issued, one platform may go to faulty state.
			Report Type: maintenance, Report Num: 20,
			Severity: major, Threshhold: 100, Throttle: 0;
			The details contain syntax in the form:
			Mate ping = value."
	REFERENCE	""
  ::=  {  maintenanceTraps  20  }


kamNetworkInterfaceDown	NOTIFICATION-TYPE
	OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	current
	DESCRIPTION	"KAM: Network Interface Down.
			Network interface hardware problem.
			Soon after this event is issued, one platform may go to faulty state.
			Report Type: maintenance, Report Num: 21,
			Severity: major, Threshhold: 100, Throttle: 0;
			The details contain syntax in the form:
			IP Address = value."
	REFERENCE	""
  ::=  {  maintenanceTraps  21  }


kamMateIsAlive	NOTIFICATION-TYPE
	OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	current
	DESCRIPTION	"KAM: Mate is Alive.
			Report Type: maintenance, Report Num: 22,
			Severity: info, Threshhold: 100, Throttle: 0;
			The details contain syntax in the form:
			Local State = value; Mate State = value."
	REFERENCE	""
  ::=  {  maintenanceTraps  22  }


pmgProcessFailedToCompleteInitialization	NOTIFICATION-TYPE
	OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	current
	DESCRIPTION	"PMG: Process Failed to Complete Initialization.
			The specified process failed to complete initialization during the restoral process.
			Report Type: maintenance, Report Num: 23,
			Severity: major, Threshhold: 100, Throttle: 0;
			The details contain syntax in the form:
			Process Name = value; Process Group = value."
	REFERENCE	""
  ::=  {  maintenanceTraps  23  }


pmgRestartingProcess	NOTIFICATION-TYPE
	OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	current
	DESCRIPTION	"PMG: Restarting Process.
			Software problem process has exited abnormally and had to be restarted.
			Report Type: maintenance, Report Num: 24,
			Severity: minor, Threshhold: 100, Throttle: 0;
			The details contain syntax in the form:
			Process Name = value; Restart Type = value;
			Restart Mode = value; Process Group = value."
	REFERENCE	""
  ::=  {  maintenanceTraps  24  }


pmgChangingState	NOTIFICATION-TYPE
	OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	current
	DESCRIPTION	"PMG: Changing State.
			Report Type: maintenance, Report Num: 25,
			Severity: info, Threshhold: 100, Throttle: 0;
			The details contain syntax in the form:
			Platform State = value."
	REFERENCE	""
  ::=  {  maintenanceTraps  25  }


pmgGoingFaulty	NOTIFICATION-TYPE
	OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	current
	DESCRIPTION	"PMG: Going Faulty.
			System has been brought down/system has detected a fault.
			Report Type: maintenance, Report Num: 26,
			Severity: major, Threshhold: 100, Throttle: 0;
			The details contain syntax in the form:
			Reason = value."
	REFERENCE	""
  ::=  {  maintenanceTraps  26  }


pmgChangingOverToActive	NOTIFICATION-TYPE
	OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	current
	DESCRIPTION	"PMG: Changing Over to Active.
			Report Type: maintenance, Report Num: 27,
			Severity: info, Threshhold: 100, Throttle: 0;
			The details contain syntax in the form:
			null = value."
	REFERENCE	""
  ::=  {  maintenanceTraps  27  }


pmgChangingOverToStandby	NOTIFICATION-TYPE
	OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	current
	DESCRIPTION	"PMG: Changing Over to Standby.
			Report Type: maintenance, Report Num: 28,
			Severity: info, Threshhold: 100, Throttle: 0;
			The details contain syntax in the form:
			null = value."
	REFERENCE	""
  ::=  {  maintenanceTraps  28  }


adminStateChangeFailure	NOTIFICATION-TYPE
	OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	current
	DESCRIPTION	"Admin State Change Failure.
			An attempt to change the Administrative state of a device has failed.
			Report Type: maintenance, Report Num: 29,
			Severity: warning, Threshhold: 100, Throttle: 0;
			The details contain syntax in the form:
			Facility Type = value; Facility Instance = value;
			Failure Reason = value; Initial Admin State = value;
			Target Admin State = value; Current Admin State = value."
	REFERENCE	""
  ::=  {  maintenanceTraps  29  }


elementManagerStateChange	NOTIFICATION-TYPE
	OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	current
	DESCRIPTION	"Element Manager State Change.
			The specified EMS has changed to the indicated state either naturally or via user request.
			Report Type: maintenance, Report Num: 30,
			Severity: info, Threshhold: 100, Throttle: 0;
			The details contain syntax in the form:
			Element Manager ID = value; Current Local State = value;
			Current Mate State = value."
	REFERENCE	""
  ::=  {  maintenanceTraps  30  }


pmgSendingGoActiveToProcess	NOTIFICATION-TYPE
	OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	current
	DESCRIPTION	"PMG: Sending Go Active to Process.
			Informational:process is being notified to switch to active state as the system is switching over from standby to active.
			Report Type: maintenance, Report Num: 32,
			Severity: info, Threshhold: 100, Throttle: 0;
			The details contain syntax in the form:
			Process Name = value; Process Group = value."
	REFERENCE	""
  ::=  {  maintenanceTraps  32  }


pmgSendingGoStandbyToProcess	NOTIFICATION-TYPE
	OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	current
	DESCRIPTION	"PMG: Sending Go Standby to Process.
			Informational: process is being notified to exit gracefully as the system is switching over to standby state, or is shutting down. The switchover or shutdown could be due to either of the following: (1) operator is taking the action to switch or shut down the system (2)the system has detected a fault
			Report Type: maintenance, Report Num: 33,
			Severity: info, Threshhold: 100, Throttle: 0;
			The details contain syntax in the form:
			Process Name = value; Process Group = value."
	REFERENCE	""
  ::=  {  maintenanceTraps  33  }


pmgSendingEndProcessToProcess	NOTIFICATION-TYPE
	OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	current
	DESCRIPTION	"PMG: Sending End Process to Process.
			Informational: process is being notified to exit gracefully as the system is switching over to standby state, or is shutting down. The switchover or shutdown could be due to either of the following: (1) operator is taking the action to switch or shut down the system (2)the system has detected a fault
			Report Type: maintenance, Report Num: 34,
			Severity: info, Threshhold: 100, Throttle: 0;
			The details contain syntax in the form:
			Process Name = value; Process Group = value."
	REFERENCE	""
  ::=  {  maintenanceTraps  34  }


pmgAllProcessesCompletedInitialization	NOTIFICATION-TYPE
	OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	current
	DESCRIPTION	"PMG: All Processes Completed Initialization.
			Informational:The system is being brought up, and all processes are ready to start executing.
			Report Type: maintenance, Report Num: 35,
			Severity: info, Threshhold: 100, Throttle: 0;
			There are no details associated."
	REFERENCE	""
  ::=  {  maintenanceTraps  35  }


pmgSendingAllProcessesInitCompleteToProcess	NOTIFICATION-TYPE
	OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	current
	DESCRIPTION	"PMG: Sending All Processes Init Complete to Process.
			Informational: The system is being brought up, and all processes are being notified to start executing
			Report Type: maintenance, Report Num: 36,
			Severity: info, Threshhold: 100, Throttle: 0;
			The details contain syntax in the form:
			Process Name = value; Process Group = value."
	REFERENCE	""
  ::=  {  maintenanceTraps  36  }


pmgKillingProcess	NOTIFICATION-TYPE
	OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	current
	DESCRIPTION	"PMG: Killing Process.
			Informational: One of the following software problems occurred while the system was being brought up or shut down:
			a process did not come up when the system was brought up and had to be killed in order to restart it.
			a process did not exit when asked to exit
			Report Type: maintenance, Report Num: 37,
			Severity: info, Threshhold: 100, Throttle: 0;
			The details contain syntax in the form:
			Process Name = value; Process Group = value."
	REFERENCE	""
  ::=  {  maintenanceTraps  37  }


pmgClearingTheDatabase	NOTIFICATION-TYPE
	OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	current
	DESCRIPTION	"PMG: Clearing the Database.
			Informational:The system is preparing to copy data from the mate. (The system has been brought up and the mate side is running.)
			Report Type: maintenance, Report Num: 38,
			Severity: info, Threshhold: 100, Throttle: 0;
			The details contain syntax in the form:
			null = value."
	REFERENCE	""
  ::=  {  maintenanceTraps  38  }


pmgClearedTheDatabase	NOTIFICATION-TYPE
	OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	current
	DESCRIPTION	"PMG: Cleared the Database.
			Informational: The system is prepared to copy data from the mate. (The system has been brought up and the mate side is running.)
			Report Type: maintenance, Report Num: 39,
			Severity: info, Threshhold: 100, Throttle: 0;
			The details contain syntax in the form:
			null = value."
	REFERENCE	""
  ::=  {  maintenanceTraps  39  }


pmgBinaryDoesNotExistForProcess	NOTIFICATION-TYPE
	OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	current
	DESCRIPTION	"PMG: Binary does not exist for Process.
			Platform not installed correctly
			Report Type: maintenance, Report Num: 40,
			Severity: critical, Threshhold: 100, Throttle: 0;
			The details contain syntax in the form:
			Program Name = value; Executable Name = value."
	REFERENCE	""
  ::=  {  maintenanceTraps  40  }


adminStateChangeSuccessfulWithWarning	NOTIFICATION-TYPE
	OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	current
	DESCRIPTION	"Admin State Change Successful with Warning.
			Device was in a flux state.
			Report Type: maintenance, Report Num: 41,
			Severity: warning, Threshhold: 100, Throttle: 0;
			The details contain syntax in the form:
			Facility Type = value; Facility Instance = value;
			Initial State = value; Target State = value;
			Current State = value; Warning Reason = value."
	REFERENCE	""
  ::=  {  maintenanceTraps  41  }


kamOfHBMessagesReceivedIsLessThan50PercentOfExpected	NOTIFICATION-TYPE
	OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	current
	DESCRIPTION	"KAM: # of HB messages received is less than 50% of expected.
			Network Problem.
			Report Type: maintenance, Report Num: 42,
			Severity: major, Threshhold: 100, Throttle: 0;
			The details contain syntax in the form:
			Interface name = value; IP Address = value;
			Expected HB messages = value; HB messages received = value."
	REFERENCE	""
  ::=  {  maintenanceTraps  42  }


pmgProcessFailedToComeUpInActiveMode	NOTIFICATION-TYPE
	OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	current
	DESCRIPTION	"PMG: Process failed to come up in active mode.
			Software or configuration problem
			Report Type: maintenance, Report Num: 43,
			Severity: critical, Threshhold: 100, Throttle: 0;
			The details contain syntax in the form:
			Process Name = value; Process Group = value."
	REFERENCE	""
  ::=  {  maintenanceTraps  43  }


pmgProcessFailedToComeUpInStandbyMode	NOTIFICATION-TYPE
	OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	current
	DESCRIPTION	"PMG: Process failed to come up in standby mode.
			Software or configuration problem
			Report Type: maintenance, Report Num: 44,
			Severity: critical, Threshhold: 100, Throttle: 0;
			The details contain syntax in the form:
			Process Name = value; Process Group = value."
	REFERENCE	""
  ::=  {  maintenanceTraps  44  }


applicationInstanceStateChangeFailure	NOTIFICATION-TYPE
	OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	current
	DESCRIPTION	"Application Instance State Change Failure.
			Switchover of Application Instace Failed because of a Platform fault
			Report Type: maintenance, Report Num: 45,
			Severity: major, Threshhold: 100, Throttle: 0;
			The details contain syntax in the form:
			Application Instance = value; Failure Reason = value."
	REFERENCE	""
  ::=  {  maintenanceTraps  45  }


networkInterfaceRestored	NOTIFICATION-TYPE
	OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	current
	DESCRIPTION	"Network interface restored.
			interface cable is put back/interface is put 'up' using ifconfig command
			Report Type: maintenance, Report Num: 46,
			Severity: info, Threshhold: 100, Throttle: 0;
			The details contain syntax in the form:
			Interface name = value; interface IP address = value."
	REFERENCE	""
  ::=  {  maintenanceTraps  46  }


threadWatchdogCounterExpiredForAThread	NOTIFICATION-TYPE
	OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	current
	DESCRIPTION	"Thread watchdog counter expired for a thread.
			Software Error
			Report Type: maintenance, Report Num: 47,
			Severity: critical, Threshhold: 100, Throttle: 0;
			The details contain syntax in the form:
			Process Name = value; Thread Type = value;
			Thread Instance = value."
	REFERENCE	""
  ::=  {  maintenanceTraps  47  }


idxTableUsageExceededMinorUsageThresholdLevel	NOTIFICATION-TYPE
	OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	current
	DESCRIPTION	"IDX Table Usage Exceeded Minor Usage Threshold Level.
			Call traffic above design limits.
			Software problem requiring manufacture analysis.
			Report Type: maintenance, Report Num: 48,
			Severity: minor, Threshhold: 100, Throttle: 0;
			The details contain syntax in the form:
			Table Name = value; Size = value;
			Used = value."
	REFERENCE	""
  ::=  {  maintenanceTraps  48  }


idxTableUsageExceededMajorUsageThresholdLevel	NOTIFICATION-TYPE
	OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	current
	DESCRIPTION	"IDX Table Usage Exceeded Major Usage Threshold Level.
			Call traffic above design limits.
			Software problem requiring manufacture analysis.
			Report Type: maintenance, Report Num: 49,
			Severity: major, Threshhold: 100, Throttle: 0;
			The details contain syntax in the form:
			Table Name = value; Table Size = value;
			Used = value."
	REFERENCE	""
  ::=  {  maintenanceTraps  49  }


idxTableUsageExceededCriticalUsageThresholdLevel	NOTIFICATION-TYPE
	OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	current
	DESCRIPTION	"IDX Table Usage Exceeded Critical Usage Threshold Level.
			Call traffic above design limits.
			Software problem requiring manufacture analysis.
			Report Type: maintenance, Report Num: 50,
			Severity: critical, Threshhold: 100, Throttle: 0;
			The details contain syntax in the form:
			Table Name = value; Table Size = value;
			Used = value."
	REFERENCE	""
  ::=  {  maintenanceTraps  50  }


aProcessExceeds70PercentOfCPUUsage	NOTIFICATION-TYPE
	OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	current
	DESCRIPTION	"A process exceeds 70% of CPU Usage.
			A process has entered a state of irratic behavior.
			Report Type: maintenance, Report Num: 51,
			Severity: major, Threshhold: 100, Throttle: 0;
			The details contain syntax in the form:
			Hostname = value; PID = value;
			Process Name = value; CPU Usage = value."
	REFERENCE	""
  ::=  {  maintenanceTraps  51  }


cpuUsageIsNowBelowThe50PercentLevel	NOTIFICATION-TYPE
	OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	current
	DESCRIPTION	"CPU usage is now below the 50% level.
			No probable cause is necessary.
			Report Type: maintenance, Report Num: 52,
			Severity: info, Threshhold: 100, Throttle: 0;
			The details contain syntax in the form:
			Hostname = value; PID = value;
			Process name = value; CPU usage = value."
	REFERENCE	""
  ::=  {  maintenanceTraps  52  }


theCPUUsageIsOver90PercentBusy	NOTIFICATION-TYPE
	OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	current
	DESCRIPTION	"The CPU usage is over 90% busy.
			To numerous to determine.
			Report Type: maintenance, Report Num: 53,
			Severity: critical, Threshhold: 100, Throttle: 0;
			The details contain syntax in the form:
			Hostname = value; CPU Usage = value."
	REFERENCE	""
  ::=  {  maintenanceTraps  53  }


theCPUHasReturnedToNormalLevelsOfOperation	NOTIFICATION-TYPE
	OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	current
	DESCRIPTION	"The CPU has returned to normal levels of operation..
			N/A
			Report Type: maintenance, Report Num: 54,
			Severity: info, Threshhold: 100, Throttle: 0;
			The details contain syntax in the form:
			Hostname = value; CPU Usage = value."
	REFERENCE	""
  ::=  {  maintenanceTraps  54  }


the5MinuteLoadAverageIsAbnormallyHigh	NOTIFICATION-TYPE
	OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	current
	DESCRIPTION	"The 5 minute load average is abnormally high.
			Multiple processes are vying for processing time on the system, which is normal in a high traffic situation such as heavy call processing or bulk provisioning.
			Report Type: maintenance, Report Num: 55,
			Severity: major, Threshhold: 100, Throttle: 0;
			The details contain syntax in the form:
			Hostname = value; Load Average = value."
	REFERENCE	""
  ::=  {  maintenanceTraps  55  }


theLoadAverageHasReturnedToNormalLevels	NOTIFICATION-TYPE
	OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	current
	DESCRIPTION	"The load average has returned to normal levels..
			N/A
			Report Type: maintenance, Report Num: 56,
			Severity: info, Threshhold: 100, Throttle: 0;
			The details contain syntax in the form:
			Hostname = value; Load Average = value."
	REFERENCE	""
  ::=  {  maintenanceTraps  56  }


memoryAndSwapAreConsumedAtCriticalLevels	NOTIFICATION-TYPE
	OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	current
	DESCRIPTION	"Memory and swap are consumed at critical levels.
			A process or multiple processes have consumed a critical amount of memory on the system and the operating system is utilizing a critical amount of the swap space for process execution. This can be a result of high call rates or bulk provisioning activity.
			Report Type: maintenance, Report Num: 57,
			Severity: critical, Threshhold: 100, Throttle: 0;
			The details contain syntax in the form:
			Hostname = value; Memory = value;
			Swap = value."
	REFERENCE	""
  ::=  {  maintenanceTraps  57  }


memoryAndSwapAreConsumedAtAbnormalLevels	NOTIFICATION-TYPE
	OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	current
	DESCRIPTION	"Memory and swap are consumed at abnormal levels.
			A process or multiple processes have consumed an abnormal amount of memory on the system and the operating system is utilizing an abnormal amount of the swap space for process execution. This can be a result of high call rates or bulk provisioning activity.
			Report Type: maintenance, Report Num: 58,
			Severity: info, Threshhold: 100, Throttle: 0;
			The details contain syntax in the form:
			Hostname = value; Memory = value;
			Swap = value."
	REFERENCE	""
  ::=  {  maintenanceTraps  58  }


diskReportsGreaterThan70PercentUtilization	NOTIFICATION-TYPE
	OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	obsolete
	DESCRIPTION	"Disk reports greater than 70% utilization.
			N/A
			Report Type: maintenance, Report Num: 59,
			Severity: major, Threshhold: 100, Throttle: 0;
			The details contain syntax in the form:
			Hostname = value; Disk = value;
			Usage = value."
	REFERENCE	""
  ::=  {  maintenanceTraps  59  }


diskUtilizationHasReturnedToNormalLevels	NOTIFICATION-TYPE
	OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	obsolete
	DESCRIPTION	"Disk utilization has returned to normal levels..
			N/A
			Report Type: maintenance, Report Num: 60,
			Severity: info, Threshhold: 100, Throttle: 0;
			The details contain syntax in the form:
			Hostname = value; Disk = value;
			Usage = value."
	REFERENCE	""
  ::=  {  maintenanceTraps  60  }


noHBMessagesReceivedThroughTheInterface	NOTIFICATION-TYPE
	OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	current
	DESCRIPTION	"No HB messages received through the interface.
			local network interface down
			mate network interface on the same sub-net is faulty
			network congestion
			Report Type: maintenance, Report Num: 61,
			Severity: critical, Threshhold: 100, Throttle: 0;
			The details contain syntax in the form:
			Interface Name = value; Interface IP address = value."
	REFERENCE	""
  ::=  {  maintenanceTraps  61  }


linkMonitorInterfaceLostCommunication	NOTIFICATION-TYPE
	OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	current
	DESCRIPTION	"Link Monitor: Interface lost communication.
			interface cable is pulled out/interface is set 'down' using ifconfig command
			interface has no connectivity to any of the machines/routers
			Report Type: maintenance, Report Num: 62,
			Severity: major, Threshhold: 100, Throttle: 0;
			The details contain syntax in the form:
			Interface Name = value; Interface IP address = value."
	REFERENCE	""
  ::=  {  maintenanceTraps  62  }


outgoingHBPeriodExceededLimit	NOTIFICATION-TYPE
	OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	current
	DESCRIPTION	"Outgoing HB period exceeded limit.
			This is caused by system performance degradation due to CPU overload or excessive I/O operations.
			Report Type: maintenance, Report Num: 63,
			Severity: major, Threshhold: 100, Throttle: 0;
			The details contain syntax in the form:
			Max. HB period(ms) = value; HB period(ms) = value."
	REFERENCE	""
  ::=  {  maintenanceTraps  63  }


averageOutgoingHBPeriodExceedsMajAlarmLimit	NOTIFICATION-TYPE
	OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	current
	DESCRIPTION	"Average outgoing HB period exceeds Maj Alarm limit.
			This is caused by system performance degradation due to CPU overload or excessive I/O operations.
			Report Type: maintenance, Report Num: 64,
			Severity: major, Threshhold: 100, Throttle: 0;
			The details contain syntax in the form:
			Max. Avg HB period = value; Avg. HB period(ms) = value."
	REFERENCE	""
  ::=  {  maintenanceTraps  64  }


diskPartitionCriticallyConsumed	NOTIFICATION-TYPE
	OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	current
	DESCRIPTION	"Disk Partition Critically Consumed.
			A process or processes is/are writing extraneous data to the named parition.
			Report Type: maintenance, Report Num: 65,
			Severity: critical, Threshhold: 100, Throttle: 0;
			The details contain syntax in the form:
			Directory = value; Device = value;
			Percentage Used = value."
	REFERENCE	""
  ::=  {  maintenanceTraps  65  }


diskPartitionSignificantlyConsumed	NOTIFICATION-TYPE
	OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	current
	DESCRIPTION	"Disk Partition Significantly Consumed.
			A process or processes is/are writing extraneous data to the named parition.
			Report Type: maintenance, Report Num: 66,
			Severity: major, Threshhold: 100, Throttle: 0;
			The details contain syntax in the form:
			Directory = value; Device = value;
			Percentage Used = value."
	REFERENCE	""
  ::=  {  maintenanceTraps  66  }


theFreeIpcPoolBuffersBelowMinorThreshold	NOTIFICATION-TYPE
	OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	current
	DESCRIPTION	"The free ipc pool buffers below minor threshold.
			IPC pool buffers are not being freed properly by the application or the application is not able to keep up with the incoming IPC messaging traffic.
			Report Type: maintenance, Report Num: 67,
			Severity: minor, Threshhold: 100, Throttle: 0;
			The details contain syntax in the form:
			Free ipc pool buffer = value; Threshold = value."
	REFERENCE	""
  ::=  {  maintenanceTraps  67  }


theFreeIpcPoolBuffersBelowMajorThreshold	NOTIFICATION-TYPE
	OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	current
	DESCRIPTION	"The free ipc pool buffers below major threshold.
			IPC pool buffers are not being freed properly by the application or the application is not able to keep up with the incoming IPC messaging traffic.
			Report Type: maintenance, Report Num: 68,
			Severity: major, Threshhold: 100, Throttle: 0;
			The details contain syntax in the form:
			Free ipc poll buffer = value; Threshold = value."
	REFERENCE	""
  ::=  {  maintenanceTraps  68  }


theFreeIpcPoolBuffersBelowCriticalThreshold	NOTIFICATION-TYPE
	OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	current
	DESCRIPTION	"The free ipc pool buffers below critical threshold.
			IPC pool buffers are not being freed properly by the application or the application is not able to keep up with the incoming IPC messaging traffic.
			Report Type: maintenance, Report Num: 69,
			Severity: critical, Threshhold: 100, Throttle: 0;
			The details contain syntax in the form:
			Free ipc poll buffer = value; Threshold = value."
	REFERENCE	""
  ::=  {  maintenanceTraps  69  }


theFreeIpcPoolBufferCountBelowMinimumRequiredForSh	NOTIFICATION-TYPE
	OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	current
	DESCRIPTION	"The free ipc pool buffer count below minimum required for sh.
			IPC pool buffers are not being freed properly by the application or the application is not able to keep up with the incoming IPC messaging traffic.
			Report Type: maintenance, Report Num: 70,
			Severity: critical, Threshhold: 100, Throttle: 0;
			The details contain syntax in the form:
			Free ipc buffer coun = value; minimum count = value."
	REFERENCE	""
  ::=  {  maintenanceTraps  70  }


localDNSServerResponseTooSlow	NOTIFICATION-TYPE
	OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	current
	DESCRIPTION	"Local DNS server response too slow.
			Local DNS server too busy
			Report Type: maintenance, Report Num: 71,
			Severity: major, Threshhold: 100, Throttle: 0;
			The details contain syntax in the form:
			DNS server IP = value."
	REFERENCE	""
  ::=  {  maintenanceTraps  71  }


externalDNSServerResponseTooSlow	NOTIFICATION-TYPE
	OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	current
	DESCRIPTION	"External DNS server response too slow.
			The network traffic is busy, or the nameserver is very busy.
 			There is an daemon called monitorDNS.sh checking
 			DNS server every minute or so. It will issue
 			alarm if it cannot contact the DNS server or the
 			response is slow. But it will clear the alarm if
 			later it can contact the DNS server.
			Report Type: maintenance, Report Num: 72,
			Severity: major, Threshhold: 100, Throttle: 0;
			The details contain syntax in the form:
			DNS server IP = value."
	REFERENCE	""
  ::=  {  maintenanceTraps  72  }


externalDNSServerNotResponsive	NOTIFICATION-TYPE
	OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	current
	DESCRIPTION	"External DNS server not responsive.
			DNS servers or the network may be down.
 			There is an daemon called monitorDNS.sh checking
 			DNS server every minute or so. It will issue
 			alarm if it cannot contact the DNS server or the
 			response is slow. But it will clear the alarm if
 			later it can contact the DNS server.
			Report Type: maintenance, Report Num: 73,
			Severity: critical, Threshhold: 100, Throttle: 0;
			The details contain syntax in the form:
			DNS server IP = value."
	REFERENCE	""
  ::=  {  maintenanceTraps  73  }


localDNSServiceNotResponsive	NOTIFICATION-TYPE
	OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	current
	DESCRIPTION	"Local DNS service not responsive.
			Local DNS service may be down
			Report Type: maintenance, Report Num: 74,
			Severity: critical, Threshhold: 100, Throttle: 0;
			The details contain syntax in the form:
			DNS server IP = value."
	REFERENCE	""
  ::=  {  maintenanceTraps  74  }


mismatchOfIPAddrPercentLocalServerAndDNS	NOTIFICATION-TYPE
	OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	current
	DESCRIPTION	"Mismatch of IP addr % local server and DNS.
			DNS updates are not getting to the BTS from the external server, or the discrepancy was detected before the local DNS lookup table was updated.
			Report Type: maintenance, Report Num: 75,
			Severity: warning, Threshhold: 100, Throttle: 0;
			The details contain syntax in the form:
			hostname = value; IP addr local server = value;
			IP addr DNS server = value."
	REFERENCE	""
  ::=  {  maintenanceTraps  75  }


mateTimeDiffersBeyondTolerance	NOTIFICATION-TYPE
	OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	current
	DESCRIPTION	"Mate time differs beyond tolerance..
			Time synchronization not working.
			Report Type: maintenance, Report Num: 77,
			Severity: major, Threshhold: 100, Throttle: 0;
			The details contain syntax in the form:
			Max time difference( = value; Actual time differen = value."
	REFERENCE	""
  ::=  {  maintenanceTraps  77  }


bdmsAdminStateChange	NOTIFICATION-TYPE
	OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	current
	DESCRIPTION	"BDMS Admin State Change.
			The Bulk Data Management Server was switched over manually.
			Report Type: maintenance, Report Num: 78,
			Severity: info, Threshhold: 100, Throttle: 0;
			The details contain syntax in the form:
			Application Instance = value; Local State = value;
			Mate State = value."
	REFERENCE	""
  ::=  {  maintenanceTraps  78  }


resourceReset	NOTIFICATION-TYPE
	OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	current
	DESCRIPTION	"Resource Reset.
			Trunk-Termination Subscriber_termination Media Gatewasy
			Report Type: maintenance, Report Num: 79,
			Severity: info, Threshhold: 100, Throttle: 0;
			The details contain syntax in the form:
			Resource Type = value; Resource Instance = value."
	REFERENCE	""
  ::=  {  maintenanceTraps  79  }


resourceResetWarning	NOTIFICATION-TYPE
	OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	current
	DESCRIPTION	"Resource Reset Warning.
			Trunk-Termination Subscriber-Termination Media Gateway
			Report Type: maintenance, Report Num: 80,
			Severity: info, Threshhold: 100, Throttle: 0;
			The details contain syntax in the form:
			Resource Type = value; Resource Instance = value;
			Warning Reason = value."
	REFERENCE	""
  ::=  {  maintenanceTraps  80  }


resourceResetFailure	NOTIFICATION-TYPE
	OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	current
	DESCRIPTION	"Resource Reset Failure.
			This the result of an internal messaging error.
			Report Type: maintenance, Report Num: 81,
			Severity: info, Threshhold: 100, Throttle: 0;
			The details contain syntax in the form:
			Resource Type = value; Resource Instance = value;
			Failure Resason = value."
	REFERENCE	""
  ::=  {  maintenanceTraps  81  }


averageOutgoingHBPeriodExceedsCriticalLimit	NOTIFICATION-TYPE
	OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	current
	DESCRIPTION	"Average outgoing HB period exceeds Critical limit.
			CPU Overload
			Report Type: maintenance, Report Num: 82,
			Severity: critical, Threshhold: 100, Throttle: 0;
			The details contain syntax in the form:
			Critical threshold f = value; Current avg. HB peri = value."
	REFERENCE	""
  ::=  {  maintenanceTraps  82  }


swapSpaceBelowMinorThreshold	NOTIFICATION-TYPE
	OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	current
	DESCRIPTION	"Swap space below minor threshold..
			Too many processes
			/tmp or /var/run are over-used
			Report Type: maintenance, Report Num: 83,
			Severity: minor, Threshhold: 5, Throttle: 0;
			The details contain syntax in the form:
			Minor threshold (MB) = value; Current value (MB) = value."
	REFERENCE	""
  ::=  {  maintenanceTraps  83  }


swapSpaceBelowMajorThreshold	NOTIFICATION-TYPE
	OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	current
	DESCRIPTION	"Swap space below major threshold.
			Too many processes
			/tmp or /var/run over-used
			Report Type: maintenance, Report Num: 84,
			Severity: major, Threshhold: 5, Throttle: 0;
			The details contain syntax in the form:
			Major threshold (MB) = value; Current value (MB) = value."
	REFERENCE	""
  ::=  {  maintenanceTraps  84  }


swapSpaceBelowCriticalThreshold	NOTIFICATION-TYPE
	OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	current
	DESCRIPTION	"Swap space below critical threshold.
			Too many processes
			/tmp or /var/run are over-used
			Report Type: maintenance, Report Num: 85,
			Severity: critical, Threshhold: 5, Throttle: 0;
			The details contain syntax in the form:
			Critical threshold(M = value; Current value (MB) = value."
	REFERENCE	""
  ::=  {  maintenanceTraps  85  }


systemHealthReportCollectionError	NOTIFICATION-TYPE
	OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	current
	DESCRIPTION	"System Health Report Collection Error.
			An error occur while collecting System Health Report.
			Report Type: maintenance, Report Num: 86,
			Severity: minor, Threshhold: 100, Throttle: 0;
			The details contain syntax in the form:
			ErrString = value."
	REFERENCE	""
  ::=  {  maintenanceTraps  86  }


statusUpdateProcessRequestFailed	NOTIFICATION-TYPE
	OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	current
	DESCRIPTION	"Status Update Process Request Failed.
			'status' command not working properly
			Report Type: maintenance, Report Num: 87,
			Severity: major, Threshhold: 100, Throttle: 0;
			The details contain syntax in the form:
			ErrString = value; ComponentType = value."
	REFERENCE	""
  ::=  {  maintenanceTraps  87  }


statusUpdateProcessDBListRetrievalError	NOTIFICATION-TYPE
	OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	current
	DESCRIPTION	"Status Update Process DB List Retrieval Error.
			Oracle DB is not working properly
			Report Type: maintenance, Report Num: 88,
			Severity: major, Threshhold: 100, Throttle: 0;
			The details contain syntax in the form:
			ErrString = value."
	REFERENCE	""
  ::=  {  maintenanceTraps  88  }


statusUpdateProcessDBUpdateError	NOTIFICATION-TYPE
	OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	current
	DESCRIPTION	"Status Update Process DB Update Error.
			MySQL DB on EMS is not working properly
			Report Type: maintenance, Report Num: 89,
			Severity: major, Threshhold: 100, Throttle: 0;
			The details contain syntax in the form:
			ErrString = value; SQLCommand = value."
	REFERENCE	""
  ::=  {  maintenanceTraps  89  }


diskPartitionModeratelyConsumed	NOTIFICATION-TYPE
	OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	current
	DESCRIPTION	"Disk Partition Moderately Consumed.
			A process or processes is/are writing extraneous data to the named parition.
			Report Type: maintenance, Report Num: 90,
			Severity: minor, Threshhold: 100, Throttle: 0;
			The details contain syntax in the form:
			Directory = value; Device = value;
			Percentage Used = value."
	REFERENCE	""
  ::=  {  maintenanceTraps  90  }


ipmConfigFileError	NOTIFICATION-TYPE
	OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	current
	DESCRIPTION	"IPM config file error.
			IPM config file error
			Report Type: maintenance, Report Num: 91,
			Severity: critical, Threshhold: 100, Throttle: 0;
			The details contain syntax in the form:
			REASON = value."
	REFERENCE	""
  ::=  {  maintenanceTraps  91  }


ipmInitializationError	NOTIFICATION-TYPE
	OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	current
	DESCRIPTION	"IPM initialization error.
			IPM failed to initialize correctly
			Report Type: maintenance, Report Num: 92,
			Severity: major, Threshhold: 100, Throttle: 0;
			The details contain syntax in the form:
			REASON = value."
	REFERENCE	""
  ::=  {  maintenanceTraps  92  }


ipmInterfaceFailure	NOTIFICATION-TYPE
	OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	current
	DESCRIPTION	"IPM interface failure.
			IPM failed to create logical interface
			Report Type: maintenance, Report Num: 93,
			Severity: major, Threshhold: 100, Throttle: 0;
			The details contain syntax in the form:
			INTERFACE_NAME = value; REASON = value."
	REFERENCE	""
  ::=  {  maintenanceTraps  93  }


ipmInterfaceStateChange	NOTIFICATION-TYPE
	OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	current
	DESCRIPTION	"IPM interface state change.
			IPM changed state on an interface (up/down)
			Report Type: maintenance, Report Num: 94,
			Severity: info, Threshhold: 100, Throttle: 0;
			The details contain syntax in the form:
			INTERFACE_NAME = value; STATE = value."
	REFERENCE	""
  ::=  {  maintenanceTraps  94  }


ipmInterfaceCreated	NOTIFICATION-TYPE
	OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	current
	DESCRIPTION	"IPM interface created.
			IPM created a new logical interface
			Report Type: maintenance, Report Num: 95,
			Severity: info, Threshhold: 100, Throttle: 0;
			The details contain syntax in the form:
			HOSTNAME = value; PHYSICAL_IF_NAME = value;
			LOGICAL_IF_NAME = value; IP_ADDR = value;
			NETMASK = value; BROADCAST_ADDR = value."
	REFERENCE	""
  ::=  {  maintenanceTraps  95  }


ipmInterfaceRemoved	NOTIFICATION-TYPE
	OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	current
	DESCRIPTION	"IPM interface removed.
			IPM removed a logical interface
			Report Type: maintenance, Report Num: 96,
			Severity: info, Threshhold: 100, Throttle: 0;
			The details contain syntax in the form:
			HOSTNAME = value; LOGICAL_IF_NAME = value;
			IP_ADDR = value."
	REFERENCE	""
  ::=  {  maintenanceTraps  96  }


ipcInputQueueEnteredThrottleState	NOTIFICATION-TYPE
	OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	current
	DESCRIPTION	"IPC Input Queue Entered Throttle State.
			The indicated thread is not able to process its IPC input messages fast enough, hence the input queue has grown too large and is using up too much of the IPC memory pool resource.
			Report Type: maintenance, Report Num: 97,
			Severity: critical, Threshhold: 500, Throttle: 0;
			The details contain syntax in the form:
			Process Name = value; Thread Type = value;
			Thread Instance = value; Hi Watermark = value;
			Lo Watermark = value."
	REFERENCE	""
  ::=  {  maintenanceTraps  97  }


ipcInputQueueDepthAt25pcOfItsHiWatermark	NOTIFICATION-TYPE
	OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	current
	DESCRIPTION	"IPC Input Queue Depth At 25pc Of Its Hi-Watermark.
			The indicated thread is not able to process its IPC input messages fast enough, hence the input queue has grown too large and is at 25% of the level at which it will enter the throttle state.
			Report Type: maintenance, Report Num: 98,
			Severity: minor, Threshhold: 500, Throttle: 0;
			The details contain syntax in the form:
			Process Name = value; Thread Type = value;
			Thread Instance = value; Hi Watermark = value;
			Lo Watermark = value."
	REFERENCE	""
  ::=  {  maintenanceTraps  98  }


ipcInputQueueDepthAt50pcOfItsHiWatermark	NOTIFICATION-TYPE
	OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	current
	DESCRIPTION	"IPC Input Queue Depth At 50pc Of Its Hi-Watermark.
			The indicated thread is not able to process its IPC input messages fast enough, hence the input queue has grown too large and is at 50% of the level at which it will enter the throttle state.
			Report Type: maintenance, Report Num: 99,
			Severity: major, Threshhold: 500, Throttle: 0;
			The details contain syntax in the form:
			Process Name = value; Thread Type = value;
			Thread Instance = value; Hi Watermark = value;
			Lo Watermark = value."
	REFERENCE	""
  ::=  {  maintenanceTraps  99  }


ipcInputQueueDepthAt75pcOfItsHiWatermark	NOTIFICATION-TYPE
	OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	current
	DESCRIPTION	"IPC Input Queue Depth At 75pc Of Its Hi-Watermark.
			he indicated thread is not able to process its IPC input messages fast enough, hence the input queue has grown too large and is at 75% of the level at which it will enter the throttle state.
			Report Type: maintenance, Report Num: 100,
			Severity: critical, Threshhold: 500, Throttle: 0;
			The details contain syntax in the form:
			Process Name = value; Thread Type = value;
			Thread Instance = value; Hi Watermark = value;
			Lo Watermark = value."
	REFERENCE	""
  ::=  {  maintenanceTraps  100  }


switchoverInProgress	NOTIFICATION-TYPE
	OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	current
	DESCRIPTION	"Switchover in Progress.
			This alarm is issued when system switchover either due to manual switchover (via CLI command), failover or automatic switchover.
			Report Type: maintenance, Report Num: 101,
			Severity: critical, Threshhold: 100, Throttle: 0;
			The details contain syntax in the form:
			Local state = value; Mate state = value;
			Reason = value."
	REFERENCE	""
  ::=  {  maintenanceTraps  101  }


threadWatchdogCounterCloseToExpiryForAThread	NOTIFICATION-TYPE
	OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	current
	DESCRIPTION	"Thread watchdog counter close to expiry for a thread.
			Software Error
			Report Type: maintenance, Report Num: 102,
			Severity: critical, Threshhold: 100, Throttle: 0;
			The details contain syntax in the form:
			Process Name = value; Thread Type = value;
			Thread Instance = value."
	REFERENCE	""
  ::=  {  maintenanceTraps  102  }


cpuIsOffline	NOTIFICATION-TYPE
	OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	current
	DESCRIPTION	"CPU Is Offline.
			Operator action
			Report Type: maintenance, Report Num: 103,
			Severity: critical, Threshhold: 100, Throttle: 0;
			The details contain syntax in the form:
			Hostname = value; CPU = value."
	REFERENCE	""
  ::=  {  maintenanceTraps  103  }


undefinedVariableInKnownSet	NOTIFICATION-TYPE
	OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	current
	DESCRIPTION	"Undefined variable in known set.
			There was no definition of a data column that could be found in the database.
			Report Type: oss, Report Num: 2,
			Severity: major, Threshhold: 100, Throttle: 0;
			The details contain syntax in the form:
			Module Name = value; Field Name = value;
			Field Value = value."
	REFERENCE	""
  ::=  {  ossTraps  2  }


undefinedDataColumnId	NOTIFICATION-TYPE
	OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	current
	DESCRIPTION	"Undefined data column id.
			The database does not contain the required data column that was requested via the SNMP interface.
			Report Type: oss, Report Num: 3,
			Severity: major, Threshhold: 100, Throttle: 0;
			The details contain syntax in the form:
			Noun = value; Data Column Id = value."
	REFERENCE	""
  ::=  {  ossTraps  3  }


requestHandlerInstantiationError	NOTIFICATION-TYPE
	OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	current
	DESCRIPTION	"Request Handler Instantiation Error.
			Resource limitation has prevented the creation of this object. This may come from a lack of memory or Class Path problem.
			Report Type: oss, Report Num: 4,
			Severity: major, Threshhold: 100, Throttle: 0;
			The details contain syntax in the form:
			User Name = value; Host = value;
			Subsystem = value."
	REFERENCE	""
  ::=  {  ossTraps  4  }


sqlErrorWhileGettingStatistics	NOTIFICATION-TYPE
	OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	current
	DESCRIPTION	"SQL Error While Getting Statistics.
			An error occurred in accessing the SQL database for statistical information in the SNMP subsystem. This may result from schema error.
			Report Type: oss, Report Num: 5,
			Severity: minor, Threshhold: 100, Throttle: 0;
			The details contain syntax in the form:
			Statistics Category = value."
	REFERENCE	""
  ::=  {  ossTraps  5  }


sqlConnectionError	NOTIFICATION-TYPE
	OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	current
	DESCRIPTION	"SQL Connection Error.
			The connection to the database timed out or the database server is not running. This is generated in the SNMP subsystem.
			Report Type: oss, Report Num: 6,
			Severity: major, Threshhold: 100, Throttle: 0;
			The details contain syntax in the form:
			Error Exception = value."
	REFERENCE	""
  ::=  {  ossTraps  6  }


snmpFileReadError	NOTIFICATION-TYPE
	OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	current
	DESCRIPTION	"SNMP File Read Error.
			The MIB file is missing or locked from access by the SNMP subsystem.
			Report Type: oss, Report Num: 7,
			Severity: warning, Threshhold: 100, Throttle: 0;
			The details contain syntax in the form:
			Filename = value."
	REFERENCE	""
  ::=  {  ossTraps  7  }


noReplyReceivedFromDestination	NOTIFICATION-TYPE
	OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	current
	DESCRIPTION	"No Reply Received from Destination.
			Received when there is no response to a CLI command from the Call Agent platform.
			Report Type: oss, Report Num: 8,
			Severity: minor, Threshhold: 100, Throttle: 5;
			The details contain syntax in the form:
			JMS Queue Name = value."
	REFERENCE	""
  ::=  {  ossTraps  8  }


snmpAuthenticationError	NOTIFICATION-TYPE
	OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	current
	DESCRIPTION	"SNMP Authentication error.
			NMS issueing wrong community string
			Report Type: oss, Report Num: 9,
			Severity: minor, Threshhold: 100, Throttle: 0;
			The details contain syntax in the form:
			RemoteHost = value."
	REFERENCE	""
  ::=  {  ossTraps  9  }


qamDBMIDXFailedWithError	NOTIFICATION-TYPE
	OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	current
	DESCRIPTION	"QAM DBM IDX Failed with Error.
			QAM is receiving an error because of Data Mismatch between what is in DBM IDX and what is in EMS db (oracle).
			DBM IDX is failing when attempting to perform SQL command.
			Report Type: oss, Report Num: 10,
			Severity: major, Threshhold: 50, Throttle: 0;
			The details contain syntax in the form:
			Transaction ID = value; Sequence Number = value;
			Location Of Error = value; DBM Result = value."
	REFERENCE	""
  ::=  {  ossTraps  10  }


qamDBMIDXMismatchDuringAddOrDelete	NOTIFICATION-TYPE
	OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	current
	DESCRIPTION	"QAM DBM IDX mismatch during Add or Delete.
			QAM is received a warning that either an entry already exists in DBM IDX during Add or an entry is nonexistent during a Delete operation.
			Report Type: oss, Report Num: 11,
			Severity: warning, Threshhold: 100, Throttle: 0;
			The details contain syntax in the form:
			Transaction ID = value; Sequence Number = value;
			Location Of Error = value; DBM Result = value."
	REFERENCE	""
  ::=  {  ossTraps  11  }


invalidCredentialsPresentedByASIPPhone	NOTIFICATION-TYPE
	OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	current
	DESCRIPTION	"Invalid credentials presented by a SIP phone.
			Invalid credentials in SIP request
			Report Type: security, Report Num: 2,
			Severity: warning, Threshhold: 100, Throttle: 0;
			The details contain syntax in the form:
			authentication user name = value; From AOR = value;
			SIP Request Type = value; Sender IP = value."
	REFERENCE	""
  ::=  {  securityTraps  2  }


ipsecConnectionDown	NOTIFICATION-TYPE
	OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	current
	DESCRIPTION	"IPSEC Connection Down.
			Kms fails to establish the pf_key socket with the IPSec engine. Implies that the IPSec engine is not running and that it may not be installed
			Report Type: security, Report Num: 3,
			Severity: major, Threshhold: 100, Throttle: 0;
			There are no details associated."
	REFERENCE	""
  ::=  {  securityTraps  3  }


ipsecMTAKeyEstablishError	NOTIFICATION-TYPE
	OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	current
	DESCRIPTION	"IPSEC MTA Key Establish Error.
			Failure to establish the IPSec keys to a given MTA using Kerberized key management protocol.
			Report Type: security, Report Num: 4,
			Severity: warning, Threshhold: 100, Throttle: 0;
			There are no details associated."
	REFERENCE	""
  ::=  {  securityTraps  4  }


ipsecOutgoingSANotFound	NOTIFICATION-TYPE
	OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	current
	DESCRIPTION	"IPSEC Outgoing SA Not Found.
			Kms receives SA-missing msgs from the IPSec engine and is unable to find a provisioned device to establish the needed SA.
			Report Type: security, Report Num: 5,
			Severity: warning, Threshhold: 100, Throttle: 0;
			There are no details associated."
	REFERENCE	""
  ::=  {  securityTraps  5  }


messageEncodingError	NOTIFICATION-TYPE
	OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	current
	DESCRIPTION	"Message Encoding Error.
			Issued when there is a message encoding error on sending an MGCP message.
			Report Type: signaling, Report Num: 2,
			Severity: warning, Threshhold: 100, Throttle: 0;
			The details contain syntax in the form:
			Endpoint Name = value; Message Type = value;
			Gateway Type = value."
	REFERENCE	""
  ::=  {  signalingTraps  2  }


messageDecodingError	NOTIFICATION-TYPE
	OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	current
	DESCRIPTION	"Message Decoding Error.
			Issued when there is a message decoding error on receiving an MGCP message.
			Report Type: signaling, Report Num: 3,
			Severity: warning, Threshhold: 100, Throttle: 0;
			The details contain syntax in the form:
			Endpoint Name = value; Gateway Type = value;
			Message Type = value."
	REFERENCE	""
  ::=  {  signalingTraps  3  }


invalidMessageReceived	NOTIFICATION-TYPE
	OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	current
	DESCRIPTION	"Invalid Message Received.
			Issued when a signaling adapter has received an invalid message from the specified endpoint.
			Report Type: signaling, Report Num: 4,
			Severity: warning, Threshhold: 100, Throttle: 0;
			The details contain syntax in the form:
			Endpoint Name = value; Message Type = value."
	REFERENCE	""
  ::=  {  signalingTraps  4  }


databaseModuleFunctionCallFailure	NOTIFICATION-TYPE
	OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	current
	DESCRIPTION	"Database Module Function Call Failure.
			A signaling adapter has detected an error while accessing a database interface.
			Report Type: signaling, Report Num: 6,
			Severity: warning, Threshhold: 100, Throttle: 0;
			The details contain syntax in the form:
			Endpoint Name = value; Return Code = value;
			Function Name = value; Calling Function = value;
			Index = value."
	REFERENCE	""
  ::=  {  signalingTraps  6  }


socketFailure	NOTIFICATION-TYPE
	OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	current
	DESCRIPTION	"Socket Failure.
			Issued when there is a failure in creating the UDP port used by the MGCP stacks.
			Some other application may already be active on the same UDP port and IP address to which the Call Agent MGCP stack is assigned.
			Report Type: signaling, Report Num: 7,
			Severity: major, Threshhold: 100, Throttle: 0;
			The details contain syntax in the form:
			Reason = value; Hostname = value."
	REFERENCE	""
  ::=  {  signalingTraps  7  }


cannotReceiveSIPMessagesFromNetwork	NOTIFICATION-TYPE
	OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	current
	DESCRIPTION	"Cannot receive SIP messages from network.
			Operating System level network errors or invalid network configuration.
			Report Type: signaling, Report Num: 8,
			Severity: major, Threshhold: 100, Throttle: 0;
			The details contain syntax in the form:
			Reason = value; Hostname = value."
	REFERENCE	""
  ::=  {  signalingTraps  8  }


timeoutOnIPAddress	NOTIFICATION-TYPE
	OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	current
	DESCRIPTION	"Timeout on IP Address.
			Issued when OptiCall is unable to communicate with a gateway.
			Report Type: signaling, Report Num: 9,
			Severity: major, Threshhold: 100, Throttle: 0;
			The details contain syntax in the form:
			MGW/Term Name = value; Gateway Type = value;
			Possible Cause = value."
	REFERENCE	""
  ::=  {  signalingTraps  9  }


failedToSendCompleteSIPMessage	NOTIFICATION-TYPE
	OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	current
	DESCRIPTION	"Failed to send complete SIP message.
			Notifies the user that the SIP stack failed to send an SIP message due to it exceeding the maximum length of a UDP packet.
			Report Type: signaling, Report Num: 10,
			Severity: minor, Threshhold: 100, Throttle: 0;
			The details contain syntax in the form:
			Destination Address = value."
	REFERENCE	""
  ::=  {  signalingTraps  10  }


failedToAllocateSIPControlBlock	NOTIFICATION-TYPE
	OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	current
	DESCRIPTION	"Failed to Allocate SIP Control Block.
			Issued when there is not enough memory to allocate a SIP Call Control Block.
			Report Type: signaling, Report Num: 11,
			Severity: major, Threshhold: 100, Throttle: 0;
			The details contain syntax in the form:
			Size = value; Detail = value."
	REFERENCE	""
  ::=  {  signalingTraps  11  }


featureServerIsNotUpOrIsNotRespondingToCallAgent	NOTIFICATION-TYPE
	OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	current
	DESCRIPTION	"Feature Server is not up or is not responding to Call Agent.
			Feature server platform is down or is not operating properly
			Report Type: signaling, Report Num: 12,
			Severity: critical, Threshhold: 30, Throttle: 0;
			The details contain syntax in the form:
			Domain Name of FS = value; Feature Server ID = value."
	REFERENCE	""
  ::=  {  signalingTraps  12  }


ss7SignalingLinkDown	NOTIFICATION-TYPE
	OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	current
	DESCRIPTION	"SS7 Signaling link down.
			SS7 trunk group may be out-of-service (OOS).
			The local Ulticom stack may be down
			SS7 link may be disconnected or faulty
			Remote SS7 signaling site may be down or incorrectly configured
			Report Type: signaling, Report Num: 13,
			Severity: major, Threshhold: 100, Throttle: 0;
			The details contain syntax in the form:
			link_number = value; link_name = value."
	REFERENCE	""
  ::=  {  signalingTraps  13  }


linkIsRemotelyInhibited	NOTIFICATION-TYPE
	OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	current
	DESCRIPTION	"Link is Remotely Inhibited.
			Issued when the specified SS7 link is inhibited at the remote end.
			Report Type: signaling, Report Num: 14,
			Severity: minor, Threshhold: 100, Throttle: 0;
			The details contain syntax in the form:
			Link = value; Link Name = value."
	REFERENCE	""
  ::=  {  signalingTraps  14  }


linkIsLocallyInhibited	NOTIFICATION-TYPE
	OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	current
	DESCRIPTION	"Link is Locally Inhibited.
			Issued when the specified SS7 link is inhibited at the local end.
			Report Type: signaling, Report Num: 15,
			Severity: minor, Threshhold: 100, Throttle: 0;
			The details contain syntax in the form:
			Link No = value; Link Name = value."
	REFERENCE	""
  ::=  {  signalingTraps  15  }


linkIsCongested	NOTIFICATION-TYPE
	OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	current
	DESCRIPTION	"Link is Congested.
			Issued when the specified SS7 link is experiencing congestion.
			Report Type: signaling, Report Num: 16,
			Severity: minor, Threshhold: 100, Throttle: 0;
			The details contain syntax in the form:
			Link No = value."
	REFERENCE	""
  ::=  {  signalingTraps  16  }


linkLocalProcessorOutage	NOTIFICATION-TYPE
	OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	current
	DESCRIPTION	"Link : Local Processor Outage.
			Issued when the specified SS7 link has experienced a processor outage.
			Report Type: signaling, Report Num: 17,
			Severity: minor, Threshhold: 100, Throttle: 0;
			The details contain syntax in the form:
			Link No = value; Link Name = value."
	REFERENCE	""
  ::=  {  signalingTraps  17  }


linkRemoteProcessorOutage	NOTIFICATION-TYPE
	OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	current
	DESCRIPTION	"Link : Remote Processor Outage.
			Issued when the specified SS7 link has experienced a processor outage.
			Report Type: signaling, Report Num: 18,
			Severity: minor, Threshhold: 100, Throttle: 0;
			The details contain syntax in the form:
			Link No = value; Link Name = value."
	REFERENCE	""
  ::=  {  signalingTraps  18  }


linkSetInaccessible	NOTIFICATION-TYPE
	OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	current
	DESCRIPTION	"Link Set Inaccessible.
			Issued when the specified SS7 link set is inaccessible.
			Report Type: signaling, Report Num: 19,
			Severity: major, Threshhold: 100, Throttle: 0;
			The details contain syntax in the form:
			Link Set No = value; Link Set Name = value."
	REFERENCE	""
  ::=  {  signalingTraps  19  }


linkSetCongestion	NOTIFICATION-TYPE
	OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	current
	DESCRIPTION	"Link Set Congestion.
			Issued when the specified SS7 link set is experiencing congestion.
			Report Type: signaling, Report Num: 20,
			Severity: major, Threshhold: 100, Throttle: 0;
			The details contain syntax in the form:
			Link Set No = value; Link Set Name = value;
			Congestion Level = value."
	REFERENCE	""
  ::=  {  signalingTraps  20  }


routeSetFailure	NOTIFICATION-TYPE
	OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	current
	DESCRIPTION	"Route set Failure.
			Issued when the specified route set has experienced a failure.
			Report Type: signaling, Report Num: 21,
			Severity: major, Threshhold: 100, Throttle: 0;
			The details contain syntax in the form:
			Route Set No = value; Route Set Name = value."
	REFERENCE	""
  ::=  {  signalingTraps  21  }


routeSetCongested	NOTIFICATION-TYPE
	OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	current
	DESCRIPTION	"Route set congested.
			Issued when the specified route set is experiencing congestion.
			Report Type: signaling, Report Num: 22,
			Severity: minor, Threshhold: 100, Throttle: 0;
			The details contain syntax in the form:
			Route Set No = value; Route Set Name = value;
			Congestion Level = value."
	REFERENCE	""
  ::=  {  signalingTraps  22  }


dpcUnavailable	NOTIFICATION-TYPE
	OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	current
	DESCRIPTION	"DPC Unavailable.
			Report Type: signaling, Report Num: 23,
			Severity: major, Threshhold: 100, Throttle: 0;
			The details contain syntax in the form:
			DPC = value."
	REFERENCE	""
  ::=  {  signalingTraps  23  }


dpcCongested	NOTIFICATION-TYPE
	OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	current
	DESCRIPTION	"DPC Congested.
			Issued when the specified destination point code is congested.
			Report Type: signaling, Report Num: 24,
			Severity: minor, Threshhold: 100, Throttle: 0;
			The details contain syntax in the form:
			DPC = value; DPC Type = value;
			Congestion Level = value."
	REFERENCE	""
  ::=  {  signalingTraps  24  }


unansweredBLO	NOTIFICATION-TYPE
	OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	current
	DESCRIPTION	"Unanswered BLO.
			Issued when a BLO message was not acknowledged before the T13 expired for the associated CIC.
			Report Type: signaling, Report Num: 25,
			Severity: warning, Threshhold: 100, Throttle: 0;
			The details contain syntax in the form:
			CIC Number = value; TGN-ID = value;
			DPC = value; OPC = value."
	REFERENCE	""
  ::=  {  signalingTraps  25  }


unansweredUBL	NOTIFICATION-TYPE
	OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	current
	DESCRIPTION	"Unanswered UBL.
			Issued when a UBL message was not acknowledged before the T15 expired for the associated CIC.
			Report Type: signaling, Report Num: 26,
			Severity: warning, Threshhold: 100, Throttle: 0;
			The details contain syntax in the form:
			CIC Number = value; TGN-ID = value;
			DPC = value; OPC = value."
	REFERENCE	""
  ::=  {  signalingTraps  26  }


unansweredCGB	NOTIFICATION-TYPE
	OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	current
	DESCRIPTION	"Unanswered CGB.
			Issued when a CGB message was not acknowledged before the T19 expired for the associated CIC.
			Report Type: signaling, Report Num: 27,
			Severity: warning, Threshhold: 100, Throttle: 0;
			The details contain syntax in the form:
			CIC Number = value; TGN-ID = value;
			DPC = value; OPC = value."
	REFERENCE	""
  ::=  {  signalingTraps  27  }


unansweredCGU	NOTIFICATION-TYPE
	OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	current
	DESCRIPTION	"Unanswered CGU.
			Issued when a CGU message was not acknowledged before the T21 expired for the associated CIC.
			Report Type: signaling, Report Num: 28,
			Severity: warning, Threshhold: 100, Throttle: 0;
			The details contain syntax in the form:
			CIC Number = value; TGN-ID = value;
			DPC = value; OPC = value."
	REFERENCE	""
  ::=  {  signalingTraps  28  }


unansweredCQM	NOTIFICATION-TYPE
	OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	current
	DESCRIPTION	"Unanswered CQM.
			Issued when a CQM message was not acknowledged before the T28 expired for the associated CIC.
			Report Type: signaling, Report Num: 29,
			Severity: warning, Threshhold: 100, Throttle: 0;
			The details contain syntax in the form:
			CIC Number = value; TGN-ID = value;
			DPC = value; OPC = value."
	REFERENCE	""
  ::=  {  signalingTraps  29  }


unansweredCVT	NOTIFICATION-TYPE
	OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	current
	DESCRIPTION	"Unanswered CVT.
			Issued when a CVT message was not acknowledged before the Tcvt expired for the associated CIC.
			Report Type: signaling, Report Num: 30,
			Severity: warning, Threshhold: 100, Throttle: 0;
			The details contain syntax in the form:
			CIC Number = value; TGN-ID = value;
			DPC = value; OPC = value."
	REFERENCE	""
  ::=  {  signalingTraps  30  }


unansweredRSC	NOTIFICATION-TYPE
	OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	current
	DESCRIPTION	"Unanswered RSC.
			Issued when a RSC message was not acknowledged before the T17 expired for the associated CIC.
			Report Type: signaling, Report Num: 31,
			Severity: warning, Threshhold: 100, Throttle: 0;
			The details contain syntax in the form:
			CIC Number = value; TGN-ID = value;
			DPC = value; OPC = value."
	REFERENCE	""
  ::=  {  signalingTraps  31  }


unansweredGRS	NOTIFICATION-TYPE
	OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	current
	DESCRIPTION	"Unanswered GRS.
			Issued when a GRS message was not acknowledged before the T23 expired for the associated CIC.
			Report Type: signaling, Report Num: 32,
			Severity: warning, Threshhold: 100, Throttle: 0;
			The details contain syntax in the form:
			CIC Number = value; TGN-ID = value;
			DPC = value; OPC = value."
	REFERENCE	""
  ::=  {  signalingTraps  32  }


unansweredREL	NOTIFICATION-TYPE
	OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	current
	DESCRIPTION	"Unanswered REL.
			Issued when a REL message was not acknowledged before the T5 expired for the associated CIC.
			Report Type: signaling, Report Num: 33,
			Severity: warning, Threshhold: 100, Throttle: 0;
			The details contain syntax in the form:
			CIC Number = value; TGN-ID = value;
			DPC = value; OPC = value."
	REFERENCE	""
  ::=  {  signalingTraps  33  }


unansweredCCR	NOTIFICATION-TYPE
	OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	current
	DESCRIPTION	"Unanswered CCR.
			Issued when an LPA message was not acknowledged before the Tccr expired for the associated CIC.
			Report Type: signaling, Report Num: 34,
			Severity: warning, Threshhold: 100, Throttle: 0;
			The details contain syntax in the form:
			CIC Number = value; TGN-ID = value;
			DPC = value; OPC = value."
	REFERENCE	""
  ::=  {  signalingTraps  34  }


trunkLocallyBlocked	NOTIFICATION-TYPE
	OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	current
	DESCRIPTION	"Trunk locally blocked.
			Issued when a BLO or CGB message was sent on the specified CIC.
			Report Type: signaling, Report Num: 36,
			Severity: minor, Threshhold: 500, Throttle: 0;
			The details contain syntax in the form:
			CIC Number = value; TGN-ID = value;
 			DPC = value; OPC = value;
 			MGW-EP-NAME = value; MGW-TSAP-ADDR = value;
 			REASON = value."
	REFERENCE	""
  ::=  {  signalingTraps  36  }


trunkRemotelyBlocked	NOTIFICATION-TYPE
	OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	current
	DESCRIPTION	"Trunk remotely blocked.
			Issued when a BLO or CGB message was received on the specified CIC if it is SS7 trunk. Issued when SERVICE OOS message is received for ISDN trunks. Issued when Reverse Make Busy (rbz) signal received for CAS operator trunk.
			Report Type: signaling, Report Num: 40,
			Severity: major, Threshhold: 500, Throttle: 0;
			The details contain syntax in the form:
			CIC Number = value; TGN-ID = value;
			DPC = value; OPC = value;
			MGW-EP-NAME = value; MGW-TSAP-ADDR = value."
	REFERENCE	""
  ::=  {  signalingTraps  40  }


cotMessageReceivedOnTheSpecifiedCIC	NOTIFICATION-TYPE
	OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	current
	DESCRIPTION	"COT message received on the specified CIC.
			Issued when a COT message was received on the specified CIC.
			Report Type: signaling, Report Num: 42,
			Severity: info, Threshhold: 100, Throttle: 0;
			The details contain syntax in the form:
			CIC Number = value; TGN-ID = value;
			DPC = value; OPC = value."
	REFERENCE	""
  ::=  {  signalingTraps  42  }


rlcReceivedInResponseToRSCMessageOnTheSpecifiedCIC	NOTIFICATION-TYPE
	OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	current
	DESCRIPTION	"RLC received in response to RSC message on the specified CIC.
			Issued when a RLC message was received in response to a RSC message on the specified CIC.
			Report Type: signaling, Report Num: 43,
			Severity: info, Threshhold: 100, Throttle: 0;
			The details contain syntax in the form:
			CIC Number = value; TGN-ID = value;
			DPC = value; OPC = value."
	REFERENCE	""
  ::=  {  signalingTraps  43  }


continuityRecheckIsPerformedOnSpecifiedCIC	NOTIFICATION-TYPE
	OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	current
	DESCRIPTION	"Continuity Recheck is performed on specified CIC.
			Issued when a continuity recheck was performed on the specified CIC.
			Report Type: signaling, Report Num: 44,
			Severity: info, Threshhold: 100, Throttle: 0;
			The details contain syntax in the form:
			CIC Number = value; TGN-ID = value;
			DPC = value; OPC = value."
	REFERENCE	""
  ::=  {  signalingTraps  44  }


circuitIsUNEQUIPPEDOnRemoteSide	NOTIFICATION-TYPE
	OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	current
	DESCRIPTION	"Circuit is UNEQUIPPED on Remote Side.
			Issued when an unequipped circuit has been detected on the remote side.
			Report Type: signaling, Report Num: 45,
			Severity: info, Threshhold: 100, Throttle: 0;
			The details contain syntax in the form:
			CIC Number = value; TGN-ID = value;
			DPC = value; OPC = value."
	REFERENCE	""
  ::=  {  signalingTraps  45  }


specifiedCICIsInvaildForTheOperation	NOTIFICATION-TYPE
	OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	current
	DESCRIPTION	"Specified CIC is Invaild for the operation.
			Issued when an invalid operation was performed on the specified CIC.
			Report Type: signaling, Report Num: 46,
			Severity: info, Threshhold: 100, Throttle: 0;
			The details contain syntax in the form:
			CIC Number = value; TGN-ID = value;
			DPC = value; OPC = value."
	REFERENCE	""
  ::=  {  signalingTraps  46  }


indicatedCircuitIsOutOfOrder	NOTIFICATION-TYPE
	OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	obsolete
	DESCRIPTION	"Indicated Circuit is out of order.
			Issued when the specified CIC is currently out of service.
			Report Type: signaling, Report Num: 47,
			Severity: info, Threshhold: 100, Throttle: 0;
			The details contain syntax in the form:
			CIC Number = value; TGN-ID = value;
			DPC = value."
	REFERENCE	""
  ::=  {  signalingTraps  47  }


indicatedCircuitIsBackInService	NOTIFICATION-TYPE
	OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	obsolete
	DESCRIPTION	"Indicated Circuit is back in Service.
			Issued when the specified CIC is restored to service.
			Report Type: signaling, Report Num: 48,
			Severity: info, Threshhold: 100, Throttle: 0;
			The details contain syntax in the form:
			CIC Number = value; TGN-ID = value;
			DPC = value."
	REFERENCE	""
  ::=  {  signalingTraps  48  }


aGeneralProcessingErrorEncountered	NOTIFICATION-TYPE
	OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	current
	DESCRIPTION	"A general Processing Error encountered.
			Issued when a general SS7 processing error occurred due to all resources being busy or an invalid event occurring.
			Report Type: signaling, Report Num: 49,
			Severity: info, Threshhold: 100, Throttle: 0;
			The details contain syntax in the form:
			CIC Number = value; TGN-ID = value;
			DPC = value; OPC = value."
	REFERENCE	""
  ::=  {  signalingTraps  49  }


unexpectedMessageForTheCallStateIsReceivedClearCa	NOTIFICATION-TYPE
	OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	current
	DESCRIPTION	"Unexpected Message for the Call State is received : Clear Ca.
			Issued when an unexpected message was received for the current call state.
			Report Type: signaling, Report Num: 50,
			Severity: info, Threshhold: 100, Throttle: 0;
			The details contain syntax in the form:
			CIC Number = value; TGN-ID = value;
			DPC = value; OPC = value."
	REFERENCE	""
  ::=  {  signalingTraps  50  }


setTrunkStateAsRemotlyUnequiped	NOTIFICATION-TYPE
	OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	current
	DESCRIPTION	"Set Trunk State as Remotly Unequiped.
			Issued when the specified CIC is marked at remotely unequipped due to the CQM response indicating that it is unequipped at the far end.
			Report Type: signaling, Report Num: 51,
			Severity: info, Threshhold: 100, Throttle: 0;
			The details contain syntax in the form:
			CIC Number = value; TGN-ID = value;
			DPC = value; OPC = value."
	REFERENCE	""
  ::=  {  signalingTraps  51  }


setTrunkStateAsNOTRemotlyBlocked	NOTIFICATION-TYPE
	OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	current
	DESCRIPTION	"Set Trunk State as NOT Remotly Blocked.
			Issued when the specified CIC is marked as not remotely blocked due to the CQM response indicating that it is not remotely blocked at the far end.
			Report Type: signaling, Report Num: 52,
			Severity: info, Threshhold: 100, Throttle: 0;
			The details contain syntax in the form:
			CIC Number = value; TGN-ID = value;
			DPC = value; OPC = value."
	REFERENCE	""
  ::=  {  signalingTraps  52  }


setTrunkStateAsRemotlyBlocked	NOTIFICATION-TYPE
	OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	current
	DESCRIPTION	"Set Trunk State as Remotly Blocked.
			Issued when the specified CIC is marked as remotely blocked due to the CQM response indicating that it is remotely blocked at the far end.
			Report Type: signaling, Report Num: 53,
			Severity: info, Threshhold: 100, Throttle: 0;
			The details contain syntax in the form:
			CIC Number = value; TGN-ID = value;
			DPC = value; OPC = value."
	REFERENCE	""
  ::=  {  signalingTraps  53  }


circuitValidationTestAborted	NOTIFICATION-TYPE
	OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	current
	DESCRIPTION	"Circuit Validation Test Aborted.
			Issued when the circuit specified failed a validation test due to an internal failure.
			Report Type: signaling, Report Num: 54,
			Severity: info, Threshhold: 100, Throttle: 0;
			The details contain syntax in the form:
			CIC Number = value; TGN-ID = value;
			DPC = value; OPC = value."
	REFERENCE	""
  ::=  {  signalingTraps  54  }


circuitValidationSuccessful	NOTIFICATION-TYPE
	OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	current
	DESCRIPTION	"Circuit Validation Successful.
			Issued when the specified circuit was successfully validated.
			Report Type: signaling, Report Num: 55,
			Severity: info, Threshhold: 100, Throttle: 0;
			The details contain syntax in the form:
			CIC Number = value; TGN-ID = value;
			DPC = value; OPC = value."
	REFERENCE	""
  ::=  {  signalingTraps  55  }


circuitValidationFailure	NOTIFICATION-TYPE
	OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	obsolete
	DESCRIPTION	"Circuit Validation Failure.
			Issued when the specified circuit was unsuccessfully validated.
			Report Type: signaling, Report Num: 56,
			Severity: info, Threshhold: 100, Throttle: 0;
			The details contain syntax in the form:
			CIC Number = value; TGN-ID = value;
			DPC = value."
	REFERENCE	""
  ::=  {  signalingTraps  56  }


continuityRecheckFailed	NOTIFICATION-TYPE
	OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	current
	DESCRIPTION	"Continuity Recheck Failed.
			Issued when a continuity recheck of the specified CIC failed.
			Report Type: signaling, Report Num: 57,
			Severity: info, Threshhold: 100, Throttle: 0;
			The details contain syntax in the form:
			CIC Number = value; TGN-ID = value;
			DPC = value; OPC = value."
	REFERENCE	""
  ::=  {  signalingTraps  57  }


continuityRecheckSuccessful	NOTIFICATION-TYPE
	OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	current
	DESCRIPTION	"Continuity Recheck Successful.
			Issued when a continuity recheck of the specified CIC was successful.
			Report Type: signaling, Report Num: 58,
			Severity: info, Threshhold: 100, Throttle: 0;
			The details contain syntax in the form:
			CIC Number = value; TGN-ID = value;
			DPC = value; OPC = value."
	REFERENCE	""
  ::=  {  signalingTraps  58  }


autoStateChangeForISDNTrunkGroupByMediaGateway	NOTIFICATION-TYPE
	OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	current
	DESCRIPTION	"Auto State Change for ISDN Trunk Group by Media Gateway.
			Issued when the specified ISDN trunk groupÆs status was changed due to a media gateway operation.
			Report Type: signaling, Report Num: 59,
			Severity: major, Threshhold: 100, Throttle: 0;
			The details contain syntax in the form:
			Trunk Group Id = value; Trunk Group Index = value;
			Media Gateway Name = value; Media Gateway Index = value;
			Service Status = value."
	REFERENCE	""
  ::=  {  signalingTraps  59  }


isdnSTATUSMessageContainingErrorIndicationReceived	NOTIFICATION-TYPE
	OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	current
	DESCRIPTION	"ISDN STATUS Message containing error indication received.
			Issued when an ISDN status message was received containing an error indication for the specified termination.
			Report Type: signaling, Report Num: 60,
			Severity: warning, Threshhold: 100, Throttle: 0;
			The details contain syntax in the form:
			Termination Name = value; Termination Index = value;
			Trunk Group Id = value; Trunk Group Index = value;
			Cause Value = value; Call State = value."
	REFERENCE	""
  ::=  {  signalingTraps  60  }


trunkOperationalStateChangedByServiceMessage	NOTIFICATION-TYPE
	OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	current
	DESCRIPTION	"Trunk Operational State Changed by Service Message.
			Issued when the specified trunk groupÆs operational status was changed via a service message from the specified gateway.
			Report Type: signaling, Report Num: 61,
			Severity: info, Threshhold: 100, Throttle: 0;
			The details contain syntax in the form:
			Termination Name = value; Termination Index = value;
			Trunk Group Id = value; Trunk Group Index = value;
			Service Status = value."
	REFERENCE	""
  ::=  {  signalingTraps  61  }


receivedISDNRESTARTMessage	NOTIFICATION-TYPE
	OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	current
	DESCRIPTION	"Received ISDN RESTART Message.
			Issued when an ISDN restart message was received from the specified gateway.
			Report Type: signaling, Report Num: 62,
			Severity: info, Threshhold: 100, Throttle: 0;
			The details contain syntax in the form:
			Termination Name = value; Termination Index = value;
			Trunk Group Id = value; Trunk Group Index = value;
			Flag = value."
	REFERENCE	""
  ::=  {  signalingTraps  62  }


mediaGatewayTerminationFaulty	NOTIFICATION-TYPE
	OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	current
	DESCRIPTION	"Media gateway/termination faulty.
			Issued when a media gateway or termination has gone faulty due to the detection of an unknown endpoint, unknown package type, and unknown event, a hardware failure, or a general call agent error.
			Report Type: signaling, Report Num: 63,
			Severity: major, Threshhold: 100, Throttle: 0;
			The details contain syntax in the form:
			fully qualified name = value; type of gateway(RGW, = value;
			Reason for failure(u = value."
	REFERENCE	""
  ::=  {  signalingTraps  63  }


mgaRunningOutOfSharedMemoryPools	NOTIFICATION-TYPE
	OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	current
	DESCRIPTION	"MGA running out of shared memory pools.
			Issued when the MGCP signaling adapter was unable to allocate data store for an IPC message due to a lack of resources.
			Report Type: signaling, Report Num: 64,
			Severity: critical, Threshhold: 100, Throttle: 0;
			There are no details associated."
	REFERENCE	""
  ::=  {  signalingTraps  64  }


mgaRunningOutOfHeapMemory	NOTIFICATION-TYPE
	OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	current
	DESCRIPTION	"MGA running out of heap memory.
			Issued when the MGCP signaling adapter was unable to allocate data store for an IPC message from the heap due to a lack of resources.
			Report Type: signaling, Report Num: 65,
			Severity: critical, Threshhold: 100, Throttle: 0;
			There are no details associated."
	REFERENCE	""
  ::=  {  signalingTraps  65  }


caInternalErrorBecauseOfWhichMGAHasToStartAutomat	NOTIFICATION-TYPE
	OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	current
	DESCRIPTION	"CA internal error (because of which MGA has to start automat.
			Issued when a call agent internal error has occurred causing the restart of the MGCP signaling adapter.
			Report Type: signaling, Report Num: 66,
			Severity: major, Threshhold: 100, Throttle: 0;
			The details contain syntax in the form:
			Fully qualified name = value; reason = value;
			detailed reason = value."
	REFERENCE	""
  ::=  {  signalingTraps  66  }


gatewayTerminationReturningTransientErrorForTheMGCPM	NOTIFICATION-TYPE
	OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	obsolete
	DESCRIPTION	"gateway/termination returning transient error for the MGCP m.
			Issued when a transient error is being returned from the specified media gateway.
			Report Type: signaling, Report Num: 67,
			Severity: major, Threshhold: 100, Throttle: 0;
			The details contain syntax in the form:
			fully qualified name = value; transient error stri = value."
	REFERENCE	""
  ::=  {  signalingTraps  67  }


mediaGatewayTerminationDown	NOTIFICATION-TYPE
	OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	current
	DESCRIPTION	"Media gateway/termination down.
			Issued when the specified media gateway is going out-of-service due to being powered down, the MGCP application going faulty, or a hardware failure.
			Report Type: signaling, Report Num: 68,
			Severity: major, Threshhold: 100, Throttle: 0; 
			The details contain syntax in the form:
			Fully qualified name = value; Type of mgw = value;
			Failure Cause = value; Subscriber Info = value;
			ICMP ping status = value."
	REFERENCE	""
  ::=  {  signalingTraps  68  }


caAndFSCommunicationMessageTimeout	NOTIFICATION-TYPE
	OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	current
	DESCRIPTION	"CA and FS communication message timeout.
			CA-FS communication failure due to wrong system configuration; -OR- CA or FS is down
			Report Type: signaling, Report Num: 69,
			Severity: critical, Threshhold: 100, Throttle: 0;
			The details contain syntax in the form:
			Configured CA Name = value."
	REFERENCE	""
  ::=  {  signalingTraps  69  }


isdnUnableToRestoreDChannelDueToFailedCommunication	NOTIFICATION-TYPE
	OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	current
	DESCRIPTION	"ISDN Unable to restore D-channel due to failed communication.
			The ISDN signaling adapter is unable to restore a D-channel due to incorrect backhaul provisioning at the media gateway or call agent.
			Report Type: signaling, Report Num: 70,
			Severity: warning, Threshhold: 100, Throttle: 0;
			The details contain syntax in the form:
			Trunk Group id = value; Trunk Group Index = value."
	REFERENCE	""
  ::=  {  signalingTraps  70  }


isdnUnableToEstablishDChannel	NOTIFICATION-TYPE
	OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	current
	DESCRIPTION	"ISDN Unable to establish D-channel.
			The ISDN signaling adapter is unable to establish a D-channel due to layer1 parameters not being provisioned correctly or improper provisioning of the network or user side.
			Report Type: signaling, Report Num: 71,
			Severity: warning, Threshhold: 100, Throttle: 0;
			The details contain syntax in the form:
			Trunk Group id = value; Trunk Group Index = value."
	REFERENCE	""
  ::=  {  signalingTraps  71  }


isdnCallsLostDueToDChannelDownForPeriodOfTime	NOTIFICATION-TYPE
	OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	current
	DESCRIPTION	"ISDN - Calls lost due to D-channel down for period of time.
			The ISDN signaling adapter has lost calls due to a D-channel being down as a result of a media gateway power loss or a loss of connection between the PBX and media gateway.
			Report Type: signaling, Report Num: 72,
			Severity: warning, Threshhold: 100, Throttle: 0;
			The details contain syntax in the form:
			Trunk Group Id = value; Trunk Group Index = value."
	REFERENCE	""
  ::=  {  signalingTraps  72  }


isdnUnableToSendRESTARTDueToRESTARTTimerExpired	NOTIFICATION-TYPE
	OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	current
	DESCRIPTION	"ISDN - unable to send RESTART due to RESTART timer expired.
			The ISDN signaling adapter was unable to send a RESTART message due to the expiration of the RESTART timer.
			Report Type: signaling, Report Num: 73,
			Severity: warning, Threshhold: 100, Throttle: 0;
			The details contain syntax in the form:
			Termination Name = value; Termination Index = value;
			Trunk Group ID = value; Trunk Group Index = value;
			Restart Class = value."
	REFERENCE	""
  ::=  {  signalingTraps  73  }


isdnUnableToSendTheSERVICEDueToTheSERVICETimerEx	NOTIFICATION-TYPE
	OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	current
	DESCRIPTION	"ISDN: unable to send the SERVICE due to the SERVICE timer ex.
			The ISDN signaling adapter was unable to send a SERVICE message due to the expiration of the SERVICE timer.
			Report Type: signaling, Report Num: 74,
			Severity: warning, Threshhold: 100, Throttle: 0;
			The details contain syntax in the form:
			Termination Name = value; Termination Index = value;
			Trunk Group ID = value; Trunk Group Index = value;
			Service Status = value."
	REFERENCE	""
  ::=  {  signalingTraps  74  }


ss7StackNotReady	NOTIFICATION-TYPE
	OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	current
	DESCRIPTION	"SS7 stack not ready.
			SS7 stack not configured properly.
			SS7 stack not ready.
			Report Type: signaling, Report Num: 75,
			Severity: critical, Threshhold: 100, Throttle: 0;
			The details contain syntax in the form:
			LogicalName = value."
	REFERENCE	""
  ::=  {  signalingTraps  75  }


timeoutOnRemoteInstance	NOTIFICATION-TYPE
	OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	current
	DESCRIPTION	"Timeout on Remote Instance.
			Communication between call agent and remote instance is faulty.
			Report Type: signaling, Report Num: 76,
			Severity: info, Threshhold: 100, Throttle: 0;
			The details contain syntax in the form:
			Port Number = value; Hostname = value."
	REFERENCE	""
  ::=  {  signalingTraps  76  }


isdnDChannelSwitchoverForNFAS	NOTIFICATION-TYPE
	OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	current
	DESCRIPTION	"ISDN D-channel Switchover for NFAS.
			Manually switched the D-channels using the CLI
			Lost active D-channel
			Report Type: signaling, Report Num: 77,
			Severity: info, Threshhold: 100, Throttle: 0;
			The details contain syntax in the form:
			Trunk Group Id = value; Trunk Group Index = value."
	REFERENCE	""
  ::=  {  signalingTraps  77  }


isdnSingleDChannelDownForNFAS	NOTIFICATION-TYPE
	OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	current
	DESCRIPTION	"ISDN single D-channel down for NFAS.
			One of the ISDN D-channels in PRI is down
			Report Type: signaling, Report Num: 78,
			Severity: minor, Threshhold: 100, Throttle: 0;
			The details contain syntax in the form:
			Trunk Group Id = value; Trunk Group Idx = value;
			Is_Primary_D_Channel = value."
	REFERENCE	""
  ::=  {  signalingTraps  78  }


generalMGCPSignalingErrorBetweenMGWAndCA	NOTIFICATION-TYPE
	OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	current
	DESCRIPTION	"General MGCP Signaling Error between MGW and CA..
			MGCP Signaling Interop Error
			Report Type: signaling, Report Num: 79,
			Severity: major, Threshhold: 100, Throttle: 0; 
			The details contain syntax in the form:
			Entity Name = value; General Context = value;
			Specifc Context = value; Failure Context = value."
	REFERENCE	""
  ::=  {  signalingTraps  79  }


outOfBoundsMemorySocketError	NOTIFICATION-TYPE
	OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	current
	DESCRIPTION	"Out of Bounds, Memory/Socket Error..
			Out of Heap Memory
			Out of IPC Pool Memory
			Socket Error - Inappropriate/Already Bound Socket in Use.
			Report Type: signaling, Report Num: 80,
			Severity: critical, Threshhold: 100, Throttle: 0;
			The details contain syntax in the form:
			Process Name = value; Description = value;
			Extra Info = value."
	REFERENCE	""
  ::=  {  signalingTraps  80  }


insufficientHeapMemory	NOTIFICATION-TYPE
	OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	current
	DESCRIPTION	"Insufficient heap memory.
			Issued when H323 signaling adapter was unable to allocate memory from the system
			Report Type: signaling, Report Num: 81,
			Severity: critical, Threshhold: 100, Throttle: 0;
			The details contain syntax in the form:
			gateway_id = value."
	REFERENCE	""
  ::=  {  signalingTraps  81  }


insufficientSharedMemoryPools	NOTIFICATION-TYPE
	OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	current
	DESCRIPTION	"Insufficient shared memory pools.
			Issued when H323 signaling adapter was unable to allocate storage
			Report Type: signaling, Report Num: 82,
			Severity: critical, Threshhold: 100, Throttle: 0;
			The details contain syntax in the form:
			gateway_id = value."
	REFERENCE	""
  ::=  {  signalingTraps  82  }


errorWhileBindingToSocket	NOTIFICATION-TYPE
	OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	current
	DESCRIPTION	"Error while binding to socket.
			Report Type: signaling, Report Num: 83,
			Severity: critical, Threshhold: 100, Throttle: 0;
			The details contain syntax in the form:
			gateway_id = value; socket_id = value;
			local_tsap_address = value; reason_str = value."
	REFERENCE	""
  ::=  {  signalingTraps  83  }


reachedMaximumSocketLimit	NOTIFICATION-TYPE
	OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	current
	DESCRIPTION	"Reached maximum socket limit.
			The configuration setting of an h3a parameter in platform.cfg is wrong.
			Report Type: signaling, Report Num: 84,
			Severity: critical, Threshhold: 100, Throttle: 0;
			The details contain syntax in the form:
			gateway_id = value; active_sockets = value."
	REFERENCE	""
  ::=  {  signalingTraps  84  }


initializationFailure	NOTIFICATION-TYPE
	OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	current
	DESCRIPTION	"Initialization failure.
			Process initialization failure has occurred.
			Report Type: signaling, Report Num: 85,
			Severity: critical, Threshhold: 100, Throttle: 0;
			The details contain syntax in the form:
			gateway_id = value; reason_str = value."
	REFERENCE	""
  ::=  {  signalingTraps  85  }


remoteH323GatewayIsNotReachable	NOTIFICATION-TYPE
	OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	current
	DESCRIPTION	"Remote H323 gateway is not reachable.
			Loss of communication with a remote gateway.
			Report Type: signaling, Report Num: 86,
			Severity: major, Threshhold: 100, Throttle: 0;
			The details contain syntax in the form:
			gateway_id = value; remote_gw_tsap_addr = value."
	REFERENCE	""
  ::=  {  signalingTraps  86  }


h323MessageParsingError	NOTIFICATION-TYPE
	OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	current
	DESCRIPTION	"H323 Message parsing error.
			Unable to successfully parse an incoming H323 message.
			Report Type: signaling, Report Num: 87,
			Severity: major, Threshhold: 100, Throttle: 0;
			The details contain syntax in the form:
			gateway_id = value; remote_gw_tsap_addr = value."
	REFERENCE	""
  ::=  {  signalingTraps  87  }


h323MessageEncodingError	NOTIFICATION-TYPE
	OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	current
	DESCRIPTION	"H323 Message encoding error.
			Unable to encode an H323 message for sending.
			Report Type: signaling, Report Num: 88,
			Severity: major, Threshhold: 100, Throttle: 0;
			The details contain syntax in the form:
			gateway_id = value; reason_str = value."
	REFERENCE	""
  ::=  {  signalingTraps  88  }


gatekeeperNotAvailableReachable	NOTIFICATION-TYPE
	OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	current
	DESCRIPTION	"Gatekeeper not available/reachable.
			Gatekeeper is not available or is unreachable
			Report Type: signaling, Report Num: 89,
			Severity: major, Threshhold: 100, Throttle: 0;
			The details contain syntax in the form:
			gateway_id = value; gatekeeper_id = value;
			gk_tsap_addr = value."
	REFERENCE	""
  ::=  {  signalingTraps  89  }


alternateGatekeeperIsNotResponding	NOTIFICATION-TYPE
	OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	current
	DESCRIPTION	"Alternate gatekeeper is not responding.
			Alternate gatekeeper is not responding
			Report Type: signaling, Report Num: 90,
			Severity: major, Threshhold: 100, Throttle: 0;
			The details contain syntax in the form:
			gateway_id = value; gatekeeper_id = value;
			gk_tsap_addr = value."
	REFERENCE	""
  ::=  {  signalingTraps  90  }


endpointSecurityViolation	NOTIFICATION-TYPE
	OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	current
	DESCRIPTION	"Endpoint Security Violation.
			An H323 security violation has occurred.
			Report Type: signaling, Report Num: 91,
			Severity: major, Threshhold: 100, Throttle: 0;
			The details contain syntax in the form:
			gateway_id = value; gatekeeper_id = value;
			gk_tsap_addr = value."
	REFERENCE	""
  ::=  {  signalingTraps  91  }


invalidCallIdentifier	NOTIFICATION-TYPE
	OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	current
	DESCRIPTION	"Invalid Call identifier.
			The call id was invalid or changed mid-call.
			Report Type: signaling, Report Num: 92,
			Severity: minor, Threshhold: 100, Throttle: 0;
			The details contain syntax in the form:
			gateway_id = value; remote_gw_tsap_addr = value;
			call_id = value."
	REFERENCE	""
  ::=  {  signalingTraps  92  }


invalidCallReferenceValue	NOTIFICATION-TYPE
	OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	current
	DESCRIPTION	"Invalid call reference value.
			The call id was invalid or changed mid-call.
			Report Type: signaling, Report Num: 93,
			Severity: minor, Threshhold: 100, Throttle: 0;
			The details contain syntax in the form:
			gateway_id = value; remote_gw_tsap_addr = value;
			call_id = value; call_ref_value = value."
	REFERENCE	""
  ::=  {  signalingTraps  93  }


invalidConferenceIdentifier	NOTIFICATION-TYPE
	OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	current
	DESCRIPTION	"Invalid conference identifier.
			The call id was invalid or changed mid-call.
			Report Type: signaling, Report Num: 94,
			Severity: minor, Threshhold: 100, Throttle: 0;
			The details contain syntax in the form:
			gateway_id = value; reason_str = value;
			remote_gw_port = value; call_id = value;
			conference_id = value."
	REFERENCE	""
  ::=  {  signalingTraps  94  }


invalidMessageFromTheNetwork	NOTIFICATION-TYPE
	OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	current
	DESCRIPTION	"Invalid message from the network.
			Unsupported or invalid message type received from network.
			Report Type: signaling, Report Num: 95,
			Severity: minor, Threshhold: 100, Throttle: 0;
			The details contain syntax in the form:
			gateway_id = value; remote_gw_tsap_addr = value;
			call_id = value; conf_id = value;
			call_ref_value = value."
	REFERENCE	""
  ::=  {  signalingTraps  95  }


internalCallProcessingError	NOTIFICATION-TYPE
	OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	current
	DESCRIPTION	"Internal call processing error.
			A software error has occurred.
			Report Type: signaling, Report Num: 96,
			Severity: minor, Threshhold: 100, Throttle: 0;
			The details contain syntax in the form:
			gateway_id = value; call_id = value;
			reason_str = value."
	REFERENCE	""
  ::=  {  signalingTraps  96  }


insufficientInformationToCompleteCall	NOTIFICATION-TYPE
	OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	current
	DESCRIPTION	"Insufficient information to complete call.
			Not enough initial call setup information was received to establish the call.
			Report Type: signaling, Report Num: 97,
			Severity: minor, Threshhold: 100, Throttle: 0;
			The details contain syntax in the form:
			gateway_id = value; call_id = value;
			conf_id = value; call_ref_value = value."
	REFERENCE	""
  ::=  {  signalingTraps  97  }


h323ProtocolInconsistencies	NOTIFICATION-TYPE
	OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	current
	DESCRIPTION	"H323 protocol inconsistencies.
			The H323 endpoint and BTS are running different protocol versions.
			Report Type: signaling, Report Num: 98,
			Severity: minor, Threshhold: 100, Throttle: 0;
			The details contain syntax in the form:
			gateway_id = value; call_id = value;
			reason_str = value."
	REFERENCE	""
  ::=  {  signalingTraps  98  }


abnormalCallClearing	NOTIFICATION-TYPE
	OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	current
	DESCRIPTION	"Abnormal call clearing.
			Unsupported or invalid message type received from network.
			Report Type: signaling, Report Num: 99,
			Severity: minor, Threshhold: 100, Throttle: 0;
			The details contain syntax in the form:
			gateway_id = value; call_id = value;
			reason_str = value."
	REFERENCE	""
  ::=  {  signalingTraps  99  }


codecNegotiationFailed	NOTIFICATION-TYPE
	OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	current
	DESCRIPTION	"Codec negotiation failed.
			Codec negotiation failed.
			Report Type: signaling, Report Num: 100,
			Severity: minor, Threshhold: 100, Throttle: 0;
			The details contain syntax in the form:
			gateway_id = value; call_id = value;
			reason_str = value."
	REFERENCE	""
  ::=  {  signalingTraps  100  }


perCallSecurityViolation	NOTIFICATION-TYPE
	OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	current
	DESCRIPTION	"Per call security violation.
			This is a future trap definition - it will not be issued in the 3.x release series.
			Report Type: signaling, Report Num: 101,
			Severity: minor, Threshhold: 100, Throttle: 0;
			The details contain syntax in the form:
			gateway_id = value; call_id = value;
			gatekeeper_id = value."
	REFERENCE	""
  ::=  {  signalingTraps  101  }


h323NetworkCongested	NOTIFICATION-TYPE
	OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	current
	DESCRIPTION	"H323 network congested.
			The H323 application processes has depleted it's resources . no more calls can be completed.
			Report Type: signaling, Report Num: 102,
			Severity: minor, Threshhold: 100, Throttle: 0;
			The details contain syntax in the form:
			gateway_id = value; gatekeeper_id = value."
	REFERENCE	""
  ::=  {  signalingTraps  102  }


aggrConnectionDown	NOTIFICATION-TYPE
	OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	current
	DESCRIPTION	"AGGR Connection Down.
			TCP connection down.
			Report Type: signaling, Report Num: 103,
			Severity: major, Threshhold: 100, Throttle: 0;
			The details contain syntax in the form:
			AGGR-ID = value."
	REFERENCE	""
  ::=  {  signalingTraps  103  }


aggrUnableToEstablishConnection	NOTIFICATION-TYPE
	OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	current
	DESCRIPTION	"AGGR Unable To Establish Connection.
			TCP Connection Establish Failure
			Report Type: signaling, Report Num: 104,
			Severity: info, Threshhold: 100, Throttle: 0;
			The details contain syntax in the form:
			AGGR-ID = value."
	REFERENCE	""
  ::=  {  signalingTraps  104  }


aggrGateSetFailed	NOTIFICATION-TYPE
	OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	current
	DESCRIPTION	"AGGR Gate Set Failed.
			Gate Set Ack Never came from CMTS
			Report Type: signaling, Report Num: 105,
			Severity: info, Threshhold: 100, Throttle: 0;
			The details contain syntax in the form:
			AGGR-ID = value; ERROR-CODE = value;
			SUB-ERROR-CODE = value."
	REFERENCE	""
  ::=  {  signalingTraps  105  }


esaBTSDFConnectionDown	NOTIFICATION-TYPE
	OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	current
	DESCRIPTION	"ESA BTS DF Connection Down.
			DF Server Not responding
			Report Type: signaling, Report Num: 106,
			Severity: minor, Threshhold: 100, Throttle: 0;
			There are no details associated."
	REFERENCE	""
  ::=  {  signalingTraps  106  }


siaLogicalIPAddressesNotMappedCorrectly	NOTIFICATION-TYPE
	OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	current
	DESCRIPTION	"SIA logical IP addresses not mapped correctly.
			Domain name for host and/or contact is invalid
			Wrong DNS Name specified for host and/or contact in the cfg files
			IP address manager not running
			Report Type: signaling, Report Num: 107,
			Severity: critical, Threshhold: 100, Throttle: 0;
			The details contain syntax in the form:
			SIA Host Domain Name = value; SIA Contact Domain N = value;
			Number of logical IP = value; Number of mapped log = value."
	REFERENCE	""
  ::=  {  signalingTraps  107  }


currentSIAConfigurationOnlyValidForSimplexSystems	NOTIFICATION-TYPE
	OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	current
	DESCRIPTION	"Current SIA configuration only valid for simplex systems.
			SIA host and contact parameters are the same in platform.cfg file
			SIA is configured for use on a simplex system
			Report Type: signaling, Report Num: 108,
			Severity: major, Threshhold: 100, Throttle: 0;
			The details contain syntax in the form:
			SIA Host Domain Name = value; SIA Contact Domain N = value."
	REFERENCE	""
  ::=  {  signalingTraps  108  }


sctpAssociationFailure	NOTIFICATION-TYPE
	OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	current
	DESCRIPTION	"SCTP Association Failure.
			Ethernet cables on SGP are unplugged or severed.
			SGP is not operational.
			Report Type: signaling, Report Num: 109,
			Severity: major, Threshhold: 100, Throttle: 0;
			The details contain syntax in the form:
			SCTP Association ID = value."
	REFERENCE	""
  ::=  {  signalingTraps  109  }


signalingGatewayGroupIsOutOfService	NOTIFICATION-TYPE
	OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	current
	DESCRIPTION	"Signaling Gateway Group is out-of-service.
			All SCTP Associations between CA and SGs are out-of-service.
			The M3UA layer is down between the CA and SGs.
			Report Type: signaling, Report Num: 110,
			Severity: critical, Threshhold: 100, Throttle: 0;
			The details contain syntax in the form:
			SG Group ID = value."
	REFERENCE	""
  ::=  {  signalingTraps  110  }


sctpAssociationDegradedOneOfTwoIPConnectionsDown	NOTIFICATION-TYPE
	OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	current
	DESCRIPTION	"SCTP Association Degraded (one of two IP connections down).
			Single Ethernet connection on CA or SGP is unplugged or severed.
			SCTP communication problem - protocol timeout.
			Report Type: signaling, Report Num: 111,
			Severity: major, Threshhold: 100, Throttle: 0;
			The details contain syntax in the form:
			SCTP Association ID = value; Destination IP Address = value."
	REFERENCE	""
  ::=  {  signalingTraps  111  }


sctpAssociationConfigurationError	NOTIFICATION-TYPE
	OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	current
	DESCRIPTION	"SCTP Association Configuration Error.
			Destination IP address is invalid
			Local IP address is invalid
			IP Routing Table is not configured properly.
			Report Type: signaling, Report Num: 112,
			Severity: minor, Threshhold: 100, Throttle: 0;
			The details contain syntax in the form:
			SCTP Association ID = value."
	REFERENCE	""
  ::=  {  signalingTraps  112  }


signalingGatewayFailure	NOTIFICATION-TYPE
	OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	current
	DESCRIPTION	"Signaling Gateway Failure.
			All associated Signaling Gateway Processes are out-of-service.
			Report Type: signaling, Report Num: 113,
			Severity: major, Threshhold: 100, Throttle: 0;
			The details contain syntax in the form:
			Signaling Gateway ID = value."
	REFERENCE	""
  ::=  {  signalingTraps  113  }


signalingGatewayProcessIsOutOfService	NOTIFICATION-TYPE
	OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	current
	DESCRIPTION	"Signaling Gateway Process is out-of-service.
			All SCTP associations between the SGP and the CA are out-of-service.
			The M3UA layer is down between the CA and SGP.
			Report Type: signaling, Report Num: 114,
			Severity: major, Threshhold: 100, Throttle: 0;
			The details contain syntax in the form:
			Signaling Gateway Pr = value."
	REFERENCE	""
  ::=  {  signalingTraps  114  }


invalidRoutingContextReceived	NOTIFICATION-TYPE
	OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	current
	DESCRIPTION	"Invalid Routing Context Received.
			routing context was configured improperly on CA or SG
			Report Type: signaling, Report Num: 115,
			Severity: warning, Threshhold: 100, Throttle: 0;
			The details contain syntax in the form:
			invalid routing cont = value; SG from which the in = value."
	REFERENCE	""
  ::=  {  signalingTraps  115  }


dpcUserPartUnavailable	NOTIFICATION-TYPE
	OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	current
	DESCRIPTION	"DPC User Part Unavailable.
			SGP sent a DUPU M3UA message to CA indicating that a User Part is unavailable on at a DPC.
			Report Type: signaling, Report Num: 116,
			Severity: major, Threshhold: 100, Throttle: 0;
			The details contain syntax in the form:
			DPC ID = value."
	REFERENCE	""
  ::=  {  signalingTraps  116  }


cvtMessageReceivedForAnUnequippedCIC	NOTIFICATION-TYPE
	OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	current
	DESCRIPTION	"CVT message received for an unequipped CIC.
			cic not provisioned
			Report Type: signaling, Report Num: 117,
			Severity: minor, Threshhold: 100, Throttle: 0;
			The details contain syntax in the form:
			cic = value; tgn-id = value;
			dpc = value."
	REFERENCE	""
  ::=  {  signalingTraps  117  }


cvrReceivedWithFailedIndication	NOTIFICATION-TYPE
	OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	current
	DESCRIPTION	"CVR received with failed indication.
			cic mismatch
			Report Type: signaling, Report Num: 118,
			Severity: minor, Threshhold: 100, Throttle: 0;
			The details contain syntax in the form:
			cic = value; tgn-id = value;
			dpc = value; OPC = value."
	REFERENCE	""
  ::=  {  signalingTraps  118  }


s7aProcessFaulty	NOTIFICATION-TYPE
	OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	current
	DESCRIPTION	"S7A process faulty.
			OMNI or S7A exception
			Report Type: signaling, Report Num: 119,
			Severity: critical, Threshhold: 100, Throttle: 0;
			The details contain syntax in the form:
			Reason = value."
	REFERENCE	""
  ::=  {  signalingTraps  119  }


s7mS7aFaulty	NOTIFICATION-TYPE
	OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	current
	DESCRIPTION	"S7M/S7A faulty.
			OMNI failure
			Report Type: signaling, Report Num: 120,
			Severity: critical, Threshhold: 100, Throttle: 0;
			The details contain syntax in the form:
			Reason = value."
	REFERENCE	""
  ::=  {  signalingTraps  120  }


m3uaCannotGoStandby	NOTIFICATION-TYPE
	OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	current
	DESCRIPTION	"M3UA Cannot Go Standby.
			No INACTIVE ACK messages received from any Signaling Gateway - SG or SCTP Associations are probably down.
			Report Type: signaling, Report Num: 121,
			Severity: major, Threshhold: 100, Throttle: 0;
			The details contain syntax in the form:
			Platform ID = value."
	REFERENCE	""
  ::=  {  signalingTraps  121  }


m3uaCannotGoActive	NOTIFICATION-TYPE
	OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	current
	DESCRIPTION	"M3UA Cannot Go Active.
			No ACTIVE ACK messages received from any Signaling Gateway - SG or SCTP Associations are probably down.
			Report Type: signaling, Report Num: 122,
			Severity: major, Threshhold: 100, Throttle: 0;
			The details contain syntax in the form:
			Platform ID = value."
	REFERENCE	""
  ::=  {  signalingTraps  122  }


destinationPointCodeIsUnavailable	NOTIFICATION-TYPE
	OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	obsolete
	DESCRIPTION	"Destination Point Code is unavailable.
			Link loss or DPC equipment out of service.
			Report Type: signaling, Report Num: 123,
			Severity: minor, Threshhold: 100, Throttle: 0;
			The details contain syntax in the form:
			Destination Point Code = value."
	REFERENCE	""
  ::=  {  signalingTraps  123  }


remoteSubsystemIsOutOfService	NOTIFICATION-TYPE
	OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	current
	DESCRIPTION	"Remote subsystem is out of service..
			Link loss or the remote subsystem out of service.
			Report Type: signaling, Report Num: 124,
			Severity: minor, Threshhold: 100, Throttle: 0;
			The details contain syntax in the form:
			Destination Point Co = value; Remote Subsystem Num = value."
	REFERENCE	""
  ::=  {  signalingTraps  124  }


sccpRoutingError	NOTIFICATION-TYPE
	OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	current
	DESCRIPTION	"SCCP routing error.
			SCCP route invalid or not available.
			Report Type: signaling, Report Num: 125,
			Severity: major, Threshhold: 100, Throttle: 0;
			There are no details associated."
	REFERENCE	""
  ::=  {  signalingTraps  125  }


sccpBindingFailure	NOTIFICATION-TYPE
	OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	current
	DESCRIPTION	"SCCP Binding Failure.
			Trillium stack binding failure
			Report Type: signaling, Report Num: 126,
			Severity: major, Threshhold: 100, Throttle: 0;
			The details contain syntax in the form:
			Local Point Code = value; Local Subsystem Numb = value."
	REFERENCE	""
  ::=  {  signalingTraps  126  }


tcapBindingFailure	NOTIFICATION-TYPE
	OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	current
	DESCRIPTION	"TCAP Binding Failure.
			Trillium stack binding failure
			Report Type: signaling, Report Num: 127,
			Severity: major, Threshhold: 100, Throttle: 0;
			There are no details associated."
	REFERENCE	""
  ::=  {  signalingTraps  127  }


inapBindingFailure	NOTIFICATION-TYPE
	OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	obsolete
	DESCRIPTION	"INAP Binding Failure.
			Trillium stack binding failure
			Report Type: signaling, Report Num: 128,
			Severity: major, Threshhold: 100, Throttle: 0;
			The details contain syntax in the form:
			Local Point Code = value; Local Subsystem Numb = value."
	REFERENCE	""
  ::=  {  signalingTraps  128  }


inapReachesTheProvisionedResourceLimit	NOTIFICATION-TYPE
	OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	obsolete
	DESCRIPTION	"INAP reaches the provisioned resource limit..
			INAP runs out of all the preconfigured dialogue ids or invoke ids.
			Report Type: signaling, Report Num: 131,
			Severity: warning, Threshhold: 100, Throttle: 0;
			The details contain syntax in the form:
			Dialogue/Invoke ID = value."
	REFERENCE	""
  ::=  {  signalingTraps  131  }


tcapReachesTheProvisionedResourceLimit	NOTIFICATION-TYPE
	OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	current
	DESCRIPTION	"TCAP reaches the provisioned resource limit..
			TCAP runs out of all the preconfigured dialogue ids or invoke ids.
			Report Type: signaling, Report Num: 132,
			Severity: warning, Threshhold: 100, Throttle: 0;
			The details contain syntax in the form:
			Dialogue/Invoke ID = value."
	REFERENCE	""
  ::=  {  signalingTraps  132  }


unableToDecodeGTDMessage	NOTIFICATION-TYPE
	OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	current
	DESCRIPTION	"Unable to decode GTD message.
			Issued when the GTD parser failed to decode a GTD message received from the specified endpoint.
			null
			Report Type: signaling, Report Num: 133,
			Severity: info, Threshhold: 100, Throttle: 0;
			The details contain syntax in the form:
			Endpoint Name = value; GTD Content Type = value."
	REFERENCE	""
  ::=  {  signalingTraps  133  }


ss7MessageEncodingFailure	NOTIFICATION-TYPE
	OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	current
	DESCRIPTION	"SS7 Message Encoding Failure.
			Error in ISUP stack or SAI message.
			Report Type: signaling, Report Num: 134,
			Severity: info, Threshhold: 100, Throttle: 0;
			The details contain syntax in the form:
			CIC Number = value; TGN-ID = value;
			DPC = value; OPC = value."
	REFERENCE	""
  ::=  {  signalingTraps  134  }


ss7MessageDecodingFailure	NOTIFICATION-TYPE
	OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	current
	DESCRIPTION	"SS7 Message Decoding Failure.
			Error in ISUP stack or SAI message.
			Report Type: signaling, Report Num: 135,
			Severity: info, Threshhold: 100, Throttle: 0;
			The details contain syntax in the form:
			CIC Number = value; TGN-ID = value;
			DPC = value; OPC = value."
	REFERENCE	""
  ::=  {  signalingTraps  135  }


ss7MessageInvalidReceived	NOTIFICATION-TYPE
	OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	current
	DESCRIPTION	"SS7 Message Invalid Received.
			Invalid message was recieved from line in ISUP stack.
			Invalid message was recieved from line in ISUP stack.
			Report Type: signaling, Report Num: 136,
			Severity: info, Threshhold: 100, Throttle: 0;
			The details contain syntax in the form:
			CIC Number = value; TGN-ID = value;
			DPC = value; OPC = value."
	REFERENCE	""
  ::=  {  signalingTraps  136  }


ss7ConfusionMessageReceived	NOTIFICATION-TYPE
	OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	current
	DESCRIPTION	"SS7 Confusion Message Received.
			An ISUP message or parameter received was not recognized or understood.
			Report Type: signaling, Report Num: 137,
			Severity: info, Threshhold: 100, Throttle: 0;
			The details contain syntax in the form:
			CIC Number = value; TGN-ID = value;
			DPC = value; OPC = value."
	REFERENCE	""
  ::=  {  signalingTraps  137  }


numberOfOpenSIPConnectionsIsReachingEngineeredLimit	NOTIFICATION-TYPE
	OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	current
	DESCRIPTION	"Number of open SIP connections is reaching engineered limit.
			System configuration and traffic load have caused the number of open connections to approach the engineered limit.  This limit will need to be increased to allow for more connections.
			Report Type: signaling, Report Num: 138,
			Severity: minor, Threshhold: 100, Throttle: 0;
			The details contain syntax in the form:
			Number of SIP connections open = value; SIP connection alarm threshold = value;
			Open SIP connection limit = value."
	REFERENCE	""
  ::=  {  signalingTraps  138  }


ss7TrunkWasFoundToBeInErroneousState	NOTIFICATION-TYPE
	OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	current
	DESCRIPTION	"SS7 trunk was found to be in erroneous state.
			Discrepency between local and remote trunk states.
			Report Type: signaling, Report Num: 139,
			Severity: info, Threshhold: 100, Throttle: 0;
			The details contain syntax in the form:
			CIC = value; TGN-ID = value;
			DPC = value; OPC = value;
			Near-End State = value; Far-End State = value;
			Resolution Action = value."
	REFERENCE	""
  ::=  {  signalingTraps  139  }


unansweredINFMessage	NOTIFICATION-TYPE
	OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	current
	DESCRIPTION	"Unanswered INF Message.
			Far-end switch is not responding to INF message with an INR message.
			Report Type: signaling, Report Num: 140,
			Severity: info, Threshhold: 100, Throttle: 0;
			The details contain syntax in the form:
			CIC = value; TGN-ID = value;
			DPC = value; OPC = value."
	REFERENCE	""
  ::=  {  signalingTraps  140  }


addressNotResolvedByDNSServer	NOTIFICATION-TYPE
	OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	current
	DESCRIPTION	"Address not resolved by DNS server.
			The tsap_address/hostname is not defined in DNS.
			Report Type: signaling, Report Num: 141,
			Severity: warning, Threshhold: 100, Throttle: 0;
			The details contain syntax in the form:
			tsap_address/hostname = value."
	REFERENCE	""
  ::=  {  signalingTraps  141  }


sipTrunkOperationallyOutOfService	NOTIFICATION-TYPE
	OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	current
	DESCRIPTION	"SIP trunk operationally out of service.
			Issued when BTS10200 is unable to communicate with a remote SIP party (Call-Agent or Proxy) over a SIP or SIP-T trunk
			Remote SIP party is not operational
			Report Type: signaling, Report Num: 142,
			Severity: critical, Threshhold: 100, Throttle: 0;
			The details contain syntax in the form:
			Trunk Group Description = value; Trunk TSAP Address = value."
	REFERENCE	""
  ::=  {  signalingTraps  142  }


ipInterfaceLinkToTheSS7SignalingGatewayIsDown	NOTIFICATION-TYPE
	OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	current
	DESCRIPTION	"IP interface link to the SS7 signaling gateway is down.
			Hardware Problem 
			Report Type: signaling, Report Num: 143,
			Severity: minor, Threshhold: 100, Throttle: 0;
			The details contain syntax in the form:
			Interface Name = value; Interface IP Address = value."
	REFERENCE	""
  ::=  {  signalingTraps  143  }


allIPInterfaceLinksToSS7SignalingGatewayAreDown	NOTIFICATION-TYPE
	OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	current
	DESCRIPTION	"All IP Interface links to SS7 signaling gateway are down.
			Hardware Problem.
			Report Type: signaling, Report Num: 144,
			Severity: critical, Threshhold: 100, Throttle: 0;
			The details contain syntax in the form:
			Interface Name = value; Interface IP Address = value;
			Interface Name = value; Interface IP Address = value."
	REFERENCE	""
  ::=  {  signalingTraps  144  }


oneIPInterfaceToSS7SignalingGatewayIsDown	NOTIFICATION-TYPE
	OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	current
	DESCRIPTION	"One IP interface to SS7 signaling gateway is down.
			Hardware Problem.
			Report Type: signaling, Report Num: 145,
			Severity: minor, Threshhold: 100, Throttle: 0;
			The details contain syntax in the form:
			Interface Name = value; Interface IP Address = value."
	REFERENCE	""
  ::=  {  signalingTraps  145  }


sctpAssociationCongested	NOTIFICATION-TYPE
	OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	current
	DESCRIPTION	"SCTP Association Congested.
			Network is congested -or-
			CPU is throttled.
			Report Type: signaling, Report Num: 150,
			Severity: minor, Threshhold: 100, Throttle: 0;
			The details contain syntax in the form:
			SCTP Association ID = value; Congestion Level = value."
	REFERENCE	""
  ::=  {  signalingTraps  150  }


callAgentMeasurementCollectionStarted	NOTIFICATION-TYPE
	OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	current
	DESCRIPTION	"Call Agent Measurement Collection Started.
			Report Type: statistics, Report Num: 2,
			Severity: info, Threshhold: 100, Throttle: 0;
			The details contain syntax in the form:
			Start Time = value."
	REFERENCE	""
  ::=  {  statisticsTraps  2  }


callAgentMeasurementCollectionFinished	NOTIFICATION-TYPE
	OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	current
	DESCRIPTION	"Call Agent Measurement Collection Finished.
			Report Type: statistics, Report Num: 3,
			Severity: info, Threshhold: 100, Throttle: 0;
			The details contain syntax in the form:
			End Time = value."
	REFERENCE	""
  ::=  {  statisticsTraps  3  }


potsCtxTdmFeatureServerMeasurementCollectionStarted	NOTIFICATION-TYPE
	OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	current
	DESCRIPTION	"POTS/CTX/TDM Feature Server Measurement Collection Started.
			Report Type: statistics, Report Num: 4,
			Severity: info, Threshhold: 100, Throttle: 0;
			The details contain syntax in the form:
			Start Time = value."
	REFERENCE	""
  ::=  {  statisticsTraps  4  }


potsCtxTdmFeatureServerMeasurementCollectionFinished	NOTIFICATION-TYPE
	OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	current
	DESCRIPTION	"POTS/CTX/TDM Feature Server Measurement Collection Finished.
			Report Type: statistics, Report Num: 5,
			Severity: info, Threshhold: 100, Throttle: 0;
			The details contain syntax in the form:
			End Time = value."
	REFERENCE	""
  ::=  {  statisticsTraps  5  }


ainFeatureServerMeasurementCollectionStarted	NOTIFICATION-TYPE
	OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	current
	DESCRIPTION	"AIN Feature Server Measurement Collection Started.
			Report Type: statistics, Report Num: 6,
			Severity: info, Threshhold: 100, Throttle: 0;
			The details contain syntax in the form:
			Start Time = value."
	REFERENCE	""
  ::=  {  statisticsTraps  6  }


ainFeatureServerMeasurementCollectionFinished	NOTIFICATION-TYPE
	OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	current
	DESCRIPTION	"AIN Feature Server Measurement Collection Finished.
			Report Type: statistics, Report Num: 7,
			Severity: info, Threshhold: 100, Throttle: 0;
			The details contain syntax in the form:
			End Time = value."
	REFERENCE	""
  ::=  {  statisticsTraps  7  }


messageSendFailure	NOTIFICATION-TYPE
	OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	current
	DESCRIPTION	"Message Send Failure.
			Originating process (for CA, FS or EMS) is not in active state, or is shut down
			HUB is down
			Platform is currently shutting down a process
			Report Type: statistics, Report Num: 8,
			Severity: warning, Threshhold: 100, Throttle: 0;
			The details contain syntax in the form:
			Originating Process = value; Traffic Mgr Msg Type = value;
			Traffic Agent Msg Ty = value."
	REFERENCE	""
  ::=  {  statisticsTraps  8  }


measurementTableSQLReadError	NOTIFICATION-TYPE
	OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	current
	DESCRIPTION	"Measurement Table SQL Read Error.
			There is no database connection, or the connection is faulty
			Traffic measurement table(s) are corrupted
			Two processors or more are attempting to access the table at the same time.
			Report Type: statistics, Report Num: 9,
			Severity: warning, Threshhold: 100, Throttle: 0;
			The details contain syntax in the form:
			Measurement Table Na = value."
	REFERENCE	""
  ::=  {  statisticsTraps  9  }


measurementTableSQLWriteError	NOTIFICATION-TYPE
	OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	current
	DESCRIPTION	"Measurement Table SQL Write Error.
			There is no database connection, or the connection is faulty
			Traffic measurement table(s) are corrupted
			Two processors or more are attempting to access the table at the same time.
			Report Type: statistics, Report Num: 10,
			Severity: warning, Threshhold: 100, Throttle: 0;
			The details contain syntax in the form:
			Measurement Table Na = value."
	REFERENCE	""
  ::=  {  statisticsTraps  10  }


measurementCollectionAPIFailure	NOTIFICATION-TYPE
	OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	current
	DESCRIPTION	"Measurement Collection API Failure.
			This report is issued when the traffic measurement subsystem on the call agent or feature server encounters difficulties when it tries to collect measurement values from one of the processes. This could be due to:
			Originating process (for CA, FS or EMS) is not in active state, or is shut down
			Platform is currently shutting down the originating process
			Report Type: statistics, Report Num: 11,
			Severity: warning, Threshhold: 100, Throttle: 0;
			The details contain syntax in the form:
			Message Type = value; Platform Type = value."
	REFERENCE	""
  ::=  {  statisticsTraps  11  }


measurementHandshakeErrorSchemaInconsistency	NOTIFICATION-TYPE
	OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	current
	DESCRIPTION	"Measurement Handshake Error - Schema Inconsistency.
			Counters added/deleted from schema in Oracle but not in the Call Agent.
			Load installed incorrectly.
			Report Type: statistics, Report Num: 12,
			Severity: major, Threshhold: 5, Throttle: 0;
			The details contain syntax in the form:
			Schemas Out of Syncronization = value."
	REFERENCE	""
  ::=  {  statisticsTraps  12  }


tmmAPIFailure	NOTIFICATION-TYPE
	OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	current
	DESCRIPTION	"tmm API failure.
			Unable to initialize shared memory
			Unable to attach to shared memory
			Shared memory table overflow
			Shared memory exhaustion
			Report Type: statistics, Report Num: 13,
			Severity: major, Threshhold: 1, Throttle: 10;
			The details contain syntax in the form:
			TMM error = value."
	REFERENCE	""
  ::=  {  statisticsTraps  13  }


ipcQueueReadFailure	NOTIFICATION-TYPE
	OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	current
	DESCRIPTION	"IPC queue read failure.
			There is a problem with IPC communication.
			Report Type: system, Report Num: 2,
			Severity: minor, Threshhold: 100, Throttle: 0;
			The details contain syntax in the form:
			Queue name = value; Location tag = value."
	REFERENCE	""
  ::=  {  systemTraps  2  }


ipcMessageAllocateFailure	NOTIFICATION-TYPE
	OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	current
	DESCRIPTION	"IPC message allocate failure.
			There is a system error, or there is not enough free memory left to allocate a message buffer.
			Report Type: system, Report Num: 3,
			Severity: minor, Threshhold: 100, Throttle: 0;
			The details contain syntax in the form:
			Requested size = value; Error code = value;
			Location tag = value."
	REFERENCE	""
  ::=  {  systemTraps  3  }


ipcMessageSendFailure	NOTIFICATION-TYPE
	OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	current
	DESCRIPTION	"IPC message send failure.
			The process for which the message is intended is not running.
			Internal error.
			Report Type: system, Report Num: 4,
			Severity: minor, Threshhold: 50, Throttle: 0;
			The details contain syntax in the form:
			Error code = value; Destination process = value;
			Message number = value; Location tag = value."
	REFERENCE	""
  ::=  {  systemTraps  4  }


unexpectedIPCMessageReceived	NOTIFICATION-TYPE
	OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	current
	DESCRIPTION	"Unexpected IPC message received.
			The process reporting the event is receiving messages it is not expecting.
			Report Type: system, Report Num: 5,
			Severity: warning, Threshhold: 100, Throttle: 0;
			The details contain syntax in the form:
			Source process type = value; Source thread type = value;
			Message number = value; Location tag = value."
	REFERENCE	""
  ::=  {  systemTraps  5  }


idxListInsertError	NOTIFICATION-TYPE
	OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	current
	DESCRIPTION	"IDX list insert error.
			Internal error.
			Report Type: system, Report Num: 6,
			Severity: minor, Threshhold: 100, Throttle: 0;
			The details contain syntax in the form:
			List name = value; Index of entry being = value;
			Location tag = value."
	REFERENCE	""
  ::=  {  systemTraps  6  }


idxListRemoveError	NOTIFICATION-TYPE
	OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	current
	DESCRIPTION	"IDX list remove error.
			Internal error.
			Report Type: system, Report Num: 7,
			Severity: minor, Threshhold: 100, Throttle: 0;
			The details contain syntax in the form:
			List name = value; Index of entry being = value;
			Location tag = value."
	REFERENCE	""
  ::=  {  systemTraps  7  }


threadCreationFailure	NOTIFICATION-TYPE
	OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	current
	DESCRIPTION	"Thread creation failure.
			Internal error-a process was unable to create one of its threads.
			Report Type: system, Report Num: 8,
			Severity: major, Threshhold: 100, Throttle: 0;
			The details contain syntax in the form:
			Error code = value; Thread name = value;
			Location tag = value."
	REFERENCE	""
  ::=  {  systemTraps  8  }


timerStartFailure	NOTIFICATION-TYPE
	OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	current
	DESCRIPTION	"Timer start failure.
			Process was unable to start a platform timer.
			Report Type: system, Report Num: 9,
			Severity: warning, Threshhold: 100, Throttle: 0;
			The details contain syntax in the form:
			Timer type = value; Location tag = value."
	REFERENCE	""
  ::=  {  systemTraps  9  }


idxUpdateRegistrationError	NOTIFICATION-TYPE
	OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	current
	DESCRIPTION	"IDX update registration error.
			Application unsuccessfully requested to be notified of table changes.
			Report Type: system, Report Num: 10,
			Severity: minor, Threshhold: 100, Throttle: 0;
			The details contain syntax in the form:
			Error code = value; Table name = value;
			Location tag = value."
	REFERENCE	""
  ::=  {  systemTraps  10  }


idxTableAddEntryError	NOTIFICATION-TYPE
	OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	current
	DESCRIPTION	"IDX table add-entry error.
			Internal error.
			Report Type: system, Report Num: 11,
			Severity: minor, Threshhold: 100, Throttle: 0;
			The details contain syntax in the form:
			Table name = value; Index of entry being = value;
			Error code = value; Location tag = value."
	REFERENCE	""
  ::=  {  systemTraps  11  }


softwareError	NOTIFICATION-TYPE
	OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	current
	DESCRIPTION	"Software Error.
			Logic path is not handled by algorithm in code
			Report Type: system, Report Num: 12,
			Severity: major, Threshhold: 100, Throttle: 0;
			The details contain syntax in the form:
			Context Description = value; FileName = value;
			Line Number of code = value; Error specific Information = value."
	REFERENCE	""
  ::=  {  systemTraps  12  }


--
-- End of Current Trap Definitions
--

--
-- Start of Obsoleted Trap Definitions
--

alarmEvent	NOTIFICATION-TYPE
	OBJECTS	{ 
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	obsolete
	DESCRIPTION	"Notification of general undefined alarms that are 
			raised.  This shows which subsystem the alarm occurred, 
			what serverity level, the alarm ID number, the 
			component ID, the component Type, and the details in 
			the dataword field.  The dataword field contains syntax 
			in the form of:
			key1 = value1; key2 = value2; ...; key8 = value8."
	REFERENCE	""
  ::=  {  generalTraps  4  }


billingPartDiskUsageMinor	NOTIFICATION-TYPE
	OBJECTS	{ 
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	obsolete
	DESCRIPTION	"Billing Partition Disk Usage Minor Threshhold Exceeded.
			Call detail records are accumulating on the disk 
			associated with the billing database in the EMS. This 
			is because data is being written into the database 
			faster than it is being read out of the database. The 
			minor threshold (default value=70%) has been exceeded.
			Threshhold: 100, Throttle: 0; Report Index: 2, 
			Category: billing, Level: minor; 
			The details contains syntax in the form of:
			Disk Usage Percentage = value."
	REFERENCE	""
  ::=  {  emsTraps  1  }

billingPartDiskUsageMajor	NOTIFICATION-TYPE
	OBJECTS	{ 
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	obsolete
	DESCRIPTION	"Billing Partition Disk Usage Major Threshhold Exceeded.
			Call detail records are accumulating on the disk 
			associated with the billing database in the EMS. This 
			is because data is being written into the database 
			faster than it is being read out of the database. The 
			major threshold (default value=80%) has been exceeded.
			Threshhold: 100, Throttle: 0; Report Index: 3, 
			Category: billing, Level: major; 
			The details contains syntax in the form of:
			Disk Usage Percentage = value."
	REFERENCE	""
  ::=  {  emsTraps  2  }

billingPartDiskUsageCritical	NOTIFICATION-TYPE
	OBJECTS	{ 
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	obsolete
	DESCRIPTION	"Billing Partition Disk Usage Critical Threshhold 
			Exceeded.  
			Call detail records are accumulating on the disk 
			associated with the billing database in the EMS. This 
			is because data is being written into the database 
			faster than it is being read out of the database. The 
			critical threshold (default value=90%) has been 
			exceeded.
			Threshhold: 100, Throttle: 0; Report Index: 4, 
			Category: billing, Level: critical; 
			The details contains syntax in the form of:
			Disk Usage Percentage = value."
	REFERENCE	""
  ::=  {  emsTraps  3  }

failedToMakeFTPTransfer	NOTIFICATION-TYPE
	OBJECTS	{ 
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	obsolete
	DESCRIPTION	"Billing Failed to make ftp transfer.
			If the FTP information has not been initialized, -or- 
			If the FTP information in the OptiCall database is 
			does not match the remote billing server -or- Login 
			user-name (for billing server) is missing or incorrect 
			in the Softswitch database, or user-name does not have 
			privilege to write to specified directory -or- 
			Password password (for billing server) is missing or 
			incorrect in the Softswitch database. Connection 
			billing-server-addr (IP address/domain name of billing 
			server) is missing or incorrect in the Softswitch 
			database, or connection to the billing server is 
			unavailable. Repository billing-server-directory 
			identifier is missing or incorrect in the OptiCall 
			database, or directory is not available on billing 
			server.
			Threshhold: 100, Throttle: 0; Report Index: 6, 
			Category: billing, Level: major; 
			The details contains syntax in the form of:
			FileName = value; FTPAddress = value;
			Error = value."
	REFERENCE	""
  ::=  {  emsTraps  4  }

localSideGoingToFaulty	NOTIFICATION-TYPE
		OBJECTS	{ 
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

		STATUS	obsolete
	DESCRIPTION	"Local Side Going to Faulty State.  
			Can result from maintenance report 5, 6, 9, 10, 19, 20. 
			(or)
			Manually shutting down the system using platform stop 
			command.
			Threshhold: 100, Throttle: 0; Report Index: 3, 
			Category: maintenance, Level: major; 
			The details contains syntax in the form of:
			Local State = value; Mate State = value; 
			Reason = value; Probable Cause = value."
	REFERENCE	""
  ::=  {  emsTraps  6  }

mateSideGoingToFaulty	NOTIFICATION-TYPE
	OBJECTS	{ 
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	obsolete
	DESCRIPTION	"Mate Side Going to Faulty State.  
			Local side has detected the mate side going to faulty 
			state.
			Threshhold: 100, Throttle: 0; Report Index: 4, 
			Category: maintenance, Level: major; 
			The details contains syntax in the form of:
			Local State = value; Mate State = value; 
			Reason = value; Probable Cause = value; 
			Mate Ping = value."
	REFERENCE	""
  ::=  {  emsTraps  7  }

changeOverFailure	NOTIFICATION-TYPE
	OBJECTS	{ 
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	obsolete
	DESCRIPTION	"Changeover Failure.  
			Issued when changing from active to standby or 
			standby to active and the changeover fails.
			(or)
			This alarm is usually caused by a software problem on 
			the specific platform identified in the alarm report.
			Threshhold: 100, Throttle: 0; Report Index: 5, 
			Category: maintenance, Level: major; 
			The details contains syntax in the form of:
			Local State = value; Mate State = value."
	REFERENCE	""
  ::=  {  emsTraps  8  }

changeOverTimeout	NOTIFICATION-TYPE
	OBJECTS	{ 
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	obsolete
	DESCRIPTION	"Changeover Timeout.  
			System failed to changeover within time period. Soon 
			after this event is issued, one platform will go to 
			faulty state.
			(or)
			This alarm is usually caused by a software problem on 
			the specific platform identified in the alarm report.
			Threshhold: 100, Throttle: 0; Report Index: 6, 
			Category: maintenance, Level: major; 
			The details contains syntax in the form of:
			Local State = value; Mate State = value."
	REFERENCE	""
  ::=  {  emsTraps  9  }

mateRejectedChangeOver	NOTIFICATION-TYPE
	OBJECTS	{ 
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	obsolete
	DESCRIPTION	"Mate Rejected Changeover.  
			Mate is not yet in stable state.
			(or)
			Mate detects itself faulty during changeover and then 
			rejects changeover.
			Threshhold: 100, Throttle: 0; Report Index: 7, 
			Category: maintenance, Level: major; 
			The details contains syntax in the form of:
			Local State = value; Mate State = value."
	REFERENCE	""
  ::=  {  emsTraps  10  }

mateChangeOverTimeout	NOTIFICATION-TYPE
	OBJECTS	{ 
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	obsolete
	DESCRIPTION	"Mate Changeover Timeout.  
			Faulty mate.
			Threshhold: 100, Throttle: 0; Report Index: 8, 
			Category: maintenance, Level: major; 
			The details contains syntax in the form of:
			Local State = value; Mate State = value."
	REFERENCE	""
  ::=  {  emsTraps  11  }

localInitFailure	NOTIFICATION-TYPE
	OBJECTS	{ 
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	obsolete
	DESCRIPTION	"Local Init Failure.  
			Bring up failed due to processes failing to 
			come up - see additional maintenance alarms that were 
			issued indicating detailed cause
			Threshhold: 100, Throttle: 0; Report Index: 9, 
			Category: maintenance, Level: major; 
			The details contains syntax in the form of:
			Local State = value; Mate State = value."
	REFERENCE	""
  ::=  {  emsTraps  12  }

localInitTimeout	NOTIFICATION-TYPE
	OBJECTS	{ 
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	obsolete
	DESCRIPTION	"Local Init Timeout.  
			Local initialization has timed out.
			(or)
			When the event report is issued, the system has 
			failed and the re-initialization process has failed. 
			Threshhold: 100, Throttle: 0; Report Index: 10, 
			Category: maintenance, Level: major; 
			The details contains syntax in the form of:
			Local State = value; Mate State = value."
	REFERENCE	""
  ::=  {  emsTraps  13  }

initSuccessful	NOTIFICATION-TYPE
	OBJECTS	{ 
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	obsolete
	DESCRIPTION	"Init Successful.  
			Initiates a local initialization that is successful.
			Threshhold: 100, Throttle: 0; Report Index: 12, 
			Category: maintenance, Level: major; 
			The details contains syntax in the form of:
			Local State = value; Mate State = value."
	REFERENCE	""
  ::=  {  emsTraps  15  }

adminStateChangeOld	NOTIFICATION-TYPE
	OBJECTS	{ 
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	obsolete
	DESCRIPTION	"Admin State Change.  
			The administrative state of a managed resource has 
			changed.
			Threshhold: 100, Throttle: 0; Report Index: 13, 
			Category: maintenance, Level: minor; 
			The details contains syntax in the form of:
			Facility Type = value; Facility Id = value; 
			Initial Admin State = value; Target Admin State = value;
			Current Admin State = value."
	REFERENCE	""
  ::=  {  emsTraps  16  }


undefinedVariableInKnowSet	NOTIFICATION-TYPE
	OBJECTS	{ 
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	obsolete
	DESCRIPTION	"Undefined Variable in Known Set.  
			There was no definition of a data column that could be 
			found in the database.
			Threshhold: 100, Throttle: 0; Report Index: 2, 
			Category: oss, Level: major; 
			The details contains syntax in the form of:
			Module Name = value; Field Name = value; 
			Field Value = value."
	REFERENCE	""
  ::=  {  emsTraps  17  }

undefinedDataColumnID	NOTIFICATION-TYPE
	OBJECTS	{ 
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	obsolete
	DESCRIPTION	"Undefined Data Column ID.  
			The database does not contain the required data 
			column that was requested via the SNMP interface.
			Threshhold: 100, Throttle: 0; Report Index: 3, 
			Category: oss, Level: major; 
			The details contains syntax in the form of:
			Noun = value; Column ID = value."
	REFERENCE	""
  ::=  {  emsTraps  18  }

requestHandlerInstantiationErrorOld	NOTIFICATION-TYPE
	OBJECTS	{ 
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	obsolete
	DESCRIPTION	"Request Handler Instantiation Error.  
			Resource limitation has prevented the creation of this 
			object. This may come from a lack of memory or Class 
			Path problem.
			Threshhold: 100, Throttle: 0; Report Index: 4, 
			Category: oss, Level: major; 
			The details contains syntax in the form of:
			User name = value; Host = value; 
			Subsystem = value."
	REFERENCE	""
  ::=  {  emsTraps  19  }

sqlErrorGettingStatistics	NOTIFICATION-TYPE
	OBJECTS	{ 
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	obsolete
	DESCRIPTION	"SQL error while getting statistics.  
			An error occurred in accessing the SQL database for 
			statistical information in the SNMP subsystem. This 
			may result from schema error.
			Threshhold: 100, Throttle: 0; Report Index: 5, 
			Category: oss, Level: minor; 
			The details contains syntax in the form of:
			Statistics Category = value."
	REFERENCE	""
  ::=  {  emsTraps  20  }

sqlErrorConnectionError	NOTIFICATION-TYPE
	OBJECTS	{ 
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	obsolete
	DESCRIPTION	"SQL connection error.  
			The connection to the database timed out or the 
			database server is not running. This is generated in 
			the SNMP subsystem.
			Threshhold: 100, Throttle: 0; Report Index: 6, 
			Category: oss, Level: major; 
			The details contains syntax in the form of:
			Error Exception = value."
	REFERENCE	""
  ::=  {  emsTraps  21  }

alarmProcessHasDied	NOTIFICATION-TYPE
	OBJECTS	{ 
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	obsolete
	DESCRIPTION	"Alarm Process has Died.  
			Software problem. If it happens often, may be followed 
			by MAINTNANCE #19.
			Threshhold: 100, Throttle: 0; Report Index: 18, 
			Category: maintenance, Level: minor; 
			The details contains syntax in the form of:
			Process Name = value; Process Group = value"
	REFERENCE	""
  ::=  {  emsTraps  47  }

processExceededRestartRate	NOTIFICATION-TYPE
	OBJECTS	{ 
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	obsolete
	DESCRIPTION	"Process Exceeded Restart Rate.  
			This alarm is usually caused by a software problem on 
			the specific side identified in the alarm report. Soon 
			after this event is issued, one side will go to faulty 
			state.
			Threshhold: 100, Throttle: 0; Report Index: 19, 
			Category: maintenance, Level: major; 
			The details contains syntax in the form of:
			Process Name = value; Restart Rate = value; 
			Process Group = value"
	REFERENCE	""
  ::=  {  emsTraps  48  }

noReplyRcvFromDestination	NOTIFICATION-TYPE
	OBJECTS	{ 
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	obsolete
	DESCRIPTION	"No Reply Received From Destination.  
			Received when there is no response to a CLI command 
			from the Call Agent platform.
			Threshhold: 100, Throttle: 5; Report Index: 8, 
			Category: oss, Level: minor; 
			The details contains syntax in the form of:
			Queue Name = value"
	REFERENCE	""
  ::=  {  emsTraps  49  }

billingTCPConnectionFail	NOTIFICATION-TYPE
	OBJECTS	{ 
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	obsolete
	DESCRIPTION	"Failed to make a tcp connection.  
			System call error.
			(or)
			Not connected to the right address.
			Threshhold: 100, Throttle: 0; Report Index: 7, 
			Category: billing, Level: critical; 
			The details contains syntax in the form of:
			Hostname = value."
	REFERENCE	""
  ::=  {  emsTraps  61  }

billingTCPPacketRecvFail	NOTIFICATION-TYPE
	OBJECTS	{ 
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	obsolete
	DESCRIPTION	"Failed to recv  tcp packets.  
			Peer went down; Socket closed.
			Threshhold: 100, Throttle: 0; Report Index: 8, 
			Category: billing, Level: major; 
			The details contains syntax in the form of:
			Hostname = value."
	REFERENCE	""
  ::=  {  emsTraps  62  }

billingFileWriteError	NOTIFICATION-TYPE
	OBJECTS	{ 
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	obsolete
	DESCRIPTION	"Error in writing to file.  
			System error, may be out of file descriptors.
			Threshhold: 100, Throttle: 0; Report Index: 15, 
			Category: billing, Level: major; 
			The details contains syntax in the form of:
			Pathname = value."
	REFERENCE	""
  ::=  {  emsTraps  63  }

billingSharedMemoryAddFail
	NOTIFICATION-TYPE OBJECTS	{ 
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	obsolete
	DESCRIPTION	"Error in adding to shared memory.  
			Out of allocated shared memory space.
			Threshhold: 100, Throttle: 0; Report Index: 17, 
			Category: billing, Level: minor; 
			The details contains no parameters."
	REFERENCE	""
  ::=  {  emsTraps  64  }

billingCDBWriteError
	NOTIFICATION-TYPE OBJECTS	{ 
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	obsolete
	DESCRIPTION	"Error in writing cdbs to disk.  
			SQL server is down.
			(or)
			Query is wrong; software error.
			Threshhold: 100, Throttle: 0; Report Index: 19, 
			Category: billing, Level: minor; 
			The details contain no parameters."
	REFERENCE	""
  ::=  {  emsTraps  65  }

billingCDBReadError
	NOTIFICATION-TYPE OBJECTS	{ 
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	obsolete
	DESCRIPTION	"Error in reading cdbs from disk.  
			SQL server is down.
			(or)
			Query is wrong; software error.
			Threshhold: 100, Throttle: 0; Report Index: 20, 
			Category: billing, Level: minor; 
			The details contain no parameters."
	REFERENCE	""
  ::=  {  emsTraps  66  }

lostKAMConToMate NOTIFICATION-TYPE
	OBJECTS	{ 
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	obsolete
	DESCRIPTION	"Lost KAM connection to mate.  
			Network interface hardware problem.
			(or)
			Router problem.
			(or)
			Soon after this event is issued, one side may go to 
			faulty state.
			Threshhold: 100, Throttle: 0; Report Index: 20, 
			Category: maintenance, Level: major; 
			The details contains syntax in the form of:
			Mate Ping = value; "
	REFERENCE	""
  ::=  {  emsTraps  67  }

netIFDown NOTIFICATION-TYPE
	OBJECTS	{ 
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	obsolete
	DESCRIPTION	"KAM: Network interface down.  
			Network interface hardware problem.
			(or)
			If these alarms are issued on multiple interfaces, the 
			side may go to a faulty state.
			(or)
			Ethernet link failure.
			Threshhold: 100, Throttle: 0; Report Index: 21, 
			Category: maintenance, Level: major; 
			The details contains syntax in the form of:
			IP Address = value;"
	REFERENCE	""
  ::=  {  emsTraps  68  }

procFailedCompleteInit NOTIFICATION-TYPE
	OBJECTS	{ 
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	obsolete
	DESCRIPTION	"Process Failed to Complete Initialization.  
			The specified process failed to complete 
			initialization during bring up.
			Threshhold: 100, Throttle: 0; Report Index: 23, 
			Category: maintenance, Level: major; 
			The details contains syntax in the form of:
			Process Name = value; Process Group = value"
	REFERENCE	""
  ::=  {  emsTraps  71  }

restartingProc NOTIFICATION-TYPE
	OBJECTS	{ 
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	obsolete
	DESCRIPTION	"Restarting Process.  
			The specified process is being restarted after having 
			experienced a failure.
			Threshhold: 100, Throttle: 0; Report Index: 24, 
			Category: maintenance, Level: minor; 
			The details contains syntax in the form of:
			Process Name = value; Restart Type = value; 
			Restart Mode = value; Process Group = value"
	REFERENCE	""
  ::=  {  emsTraps  72  }

pmgGoingFaultyOld NOTIFICATION-TYPE
	OBJECTS	{ 
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	obsolete
	DESCRIPTION	"PMG: Going Faulty.  
			A side is changing state to faulty due to the failure 
			of one or more component processes.
			Threshhold: 100, Throttle: 0; Report Index: 26, 
			Category: maintenance, Level: major; 
			The details contains syntax in the form of:
			Reason = value;"
	REFERENCE	""
  ::=  {  emsTraps  73  }

billingSharedMemUpdateFailed NOTIFICATION-TYPE
	OBJECTS	{ 
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	obsolete
	DESCRIPTION	"Shared Memory Update failed for billing.  
			EMS could possibly be down causing full shared memory.
			(or)
			High Call Volume of more than 200 calls per second.
			Threshhold: 100, Throttle: 0; Report Index: 26, 
			Category: billing, Level: major; 
			The details contains syntax in the form of:
			Reason = value; EntryNumber = value"
	REFERENCE	""
  ::=  {  emsTraps  74  }

billingSharedMemEntryRmFailed NOTIFICATION-TYPE
	OBJECTS	{ 
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	obsolete
	DESCRIPTION	"Shared Memory Entry Removed Failed for billing.  
			Software error. Entry may not be in shared memory.
			Threshhold: 100, Throttle: 0; Report Index: 27, 
			Category: billing, Level: major; 
			The details contains syntax in the form of:
			EntryNumber = value;"
	REFERENCE	""
  ::=  {  emsTraps  75  }

billingWrongPortNum NOTIFICATION-TYPE
	OBJECTS	{ 
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	obsolete
	DESCRIPTION	"Wrong Port Number Specified in Billing.  
			Wrong port number specified in platform .cfg file.
			Threshhold: 100, Throttle: 0; Report Index: 28, 
			Category: billing, Level: major; 
			The details contains syntax in the form of:
			PortNumber = value;"
	REFERENCE	""
  ::=  {  emsTraps  76  }

billingCdbSendFailed NOTIFICATION-TYPE
	OBJECTS	{ 
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	obsolete
	DESCRIPTION	"CDB Send Failed for Billing.  
			TCP Send call failure.
			(or)
			Both EMSs down.
			Threshhold: 100, Throttle: 0; Report Index: 29, 
			Category: billing, Level: major; 
			No details."
	REFERENCE	""
  ::=  {  emsTraps  77  }

billingDomainNameMappingFailed NOTIFICATION-TYPE
	OBJECTS	{ 
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	obsolete
	DESCRIPTION	"Domain Name Mapping Failed for Billing.  
			Wrong DNS name mapping specified in cfg files.
			Threshhold: 100, Throttle: 0; Report Index: 30, 
			Category: billing, Level: major; 
			The details contains syntax in the form of:
			Address = value;"
	REFERENCE	""
  ::=  {  emsTraps  78  }

billingPortNotSpecified NOTIFICATION-TYPE
	OBJECTS	{ 
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	obsolete
	DESCRIPTION	"Port Not Specified in Billing.  
			Port not specified in platform.cfg.
			Threshhold: 100, Throttle: 0; Report Index: 31, 
			Category: billing, Level: major; 
			No details."
	REFERENCE	""
  ::=  {  emsTraps  79  }

billingEMSAddrNotSpecified NOTIFICATION-TYPE
	OBJECTS	{ 
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	obsolete
	DESCRIPTION	"EMS Address Not Specified for Billing.  
			Either the primary or secondary EMS address has not 
			been specified in the platform.cfg.
			Threshhold: 100, Throttle: 0; Report Index: 32, 
			Category: billing, Level: major; 
			No details."
	REFERENCE	""
  ::=  {  emsTraps  80  }


configKAMMateConfigError NOTIFICATION-TYPE
	OBJECTS	{ 
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	obsolete
	DESCRIPTION	"KAM: Mate configuration error.  
			Mate and local are configured to be same side.
			(or)			
			One or both sides configured with wrong mate 
			Redundancy DNS name.
			(or)
			IP addresses associated with Mate Redundancy DNS names 
			have been changed.
			Threshhold: 100, Throttle: 0; Report Index: 3, 
			Category: config, Level: major; 
			The details contains syntax in the form of:
			Reason = value"
	REFERENCE	""
  ::=  {  emsTraps  81  }

dbErrorsInEMSDb NOTIFICATION-TYPE
	OBJECTS	{ 
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	obsolete
	DESCRIPTION	"There are errors in EMS database DefError queue; 
			contact support.  
			Replication data conflicts.
			(or)
			Update/delete on nonexisting data.
			(or)
			Unique constraint (Primary key) violated.
			Threshhold: 100, Throttle: 0; Report Index: 3, 
			Category: database, Level: critical; 
			The details contains syntax in the form of:
			HostName = value; DatabaseName = value; 
			ErrorCount = value; TimeStamp = value"
	REFERENCE	""
  ::=  {  emsTraps  82  }

dbReplicationPUSHJobBroken NOTIFICATION-TYPE
	OBJECTS	{ 
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	obsolete
	DESCRIPTION	"EMS db_heart_beat: replication PUSH job broken.  
			Remote database is not accessible.
			(or)
			Remote database is down.
			(or)
			Remote Oracle Listener process died.
			(or)
			Network connection is broken.
			Threshhold: 100, Throttle: 0; Report Index: 4, 
			Category: database, Level: critical; 
			The details contains syntax in the form of:
			HostName = value; LocalDatabase = value; 
			RemoteDatabase = value; Job = value; TimeStamp = value"
	REFERENCE	""
  ::=  {  emsTraps  83  }

dbHeartBeatProcessDied NOTIFICATION-TYPE
	OBJECTS	{ 
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	obsolete
	DESCRIPTION	"EMS db_heart_beat process died.  
			Threshhold: 100, Throttle: 0; Report Index: 5, 
			Category: database, Level: critical; 
			The details contains syntax in the form of:
			HostName = value; DatabaseName = value; 
			TimeStamp  =value"
	REFERENCE	""
  ::=  {  emsTraps  84  }

dbReplicationDefTranDestQueueOverloaded NOTIFICATION-TYPE
	OBJECTS	{ 
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	obsolete
	DESCRIPTION	"EMS database replication DefTranDest queue overloaded.
			Replication PUSH job is broken.
			(or)
			Remote database is not accessible.
			(or)
			Database is overloaded.
			Threshhold: 100, Throttle: 0; Report Index: 6, 
			Category: database, Level: major; 
			The details contains syntax in the form of:
			HostName = value; DatabaseName = value; 
			Threshold = value; TimeStamp = value"
	REFERENCE	""
  ::=  {  emsTraps  85  }

dbDefTranQueueOverloaded NOTIFICATION-TYPE
	OBJECTS	{ 
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	obsolete
	DESCRIPTION	"EMS database DefTran Queue is overloaded.  
			EMS database DefTranDest queue is overloaded.
			(or)
			Too many errors in DefError queue.
			(or)
			Replication PURGE job is broken or overloaded.
			Threshhold: 100, Throttle: 0; Report Index: 7, 
			Category: database, Level: minor; 
			The details contains syntax in the form of:
			HostName = value; DatabaseName = value; 
			Threshhold = value; TimeStamp = value"
	REFERENCE	""
  ::=  {  emsTraps  86  }

dbTablespaceOutOfSpace NOTIFICATION-TYPE
	OBJECTS	{ 
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	obsolete
	DESCRIPTION	"EMS database tablespace is out of free space.  
			Increased data volume or transactions
			Threshhold: 100, Throttle: 0; Report Index: 8, 
			Category: database, Level: major; 
			The details contains syntax in the form of:
			HostName = value; DatabaseName = value; 
			TablespaceName = value; TotalFreeSpace = value; 
			TimeStamp = value"
	REFERENCE	""
  ::=  {  emsTraps  87  }

dbArchiveLogDirGettingFull NOTIFICATION-TYPE
	OBJECTS	{ 
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	obsolete
	DESCRIPTION	"URGENT: EMS database archive log directory is getting 
			full.  
			Transaction volume increased.
			Threshhold: 100, Throttle: 0; Report Index: 9, 
			Category: database, Level: critical; 
			The details contains syntax in the form of:
			HostName = value; DatabaseName = value; 
			DirectoryName = value; FreeSpace = value; 
			TimeStamp = value"
	REFERENCE	""
  ::=  {  emsTraps  88  }

dbBackupFailed NOTIFICATION-TYPE
	OBJECTS	{ 
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	obsolete
	DESCRIPTION	"EMS database: Backup failed.  
			System or hardware unstable.
			Threshhold: 100, Throttle: 0; Report Index: 10, 
			Category: database, Level: major; 
			The details contains syntax in the form of:
			HostName = value; DatabaseName = value; 
			Message1 = value; Message2 = value; 
			TimeStamp = value"
	REFERENCE	""
  ::=  {  emsTraps  89  }

dbLogAlerts NOTIFICATION-TYPE
	OBJECTS	{ 
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	obsolete
	DESCRIPTION	"EMS database alert.  Log alerts.  
			Threshhold: 100, Throttle: 0; Report Index: 11, 
			Category: database, Level: major; 
			The details contains syntax in the form of:
			HostName = value; DatabaseName = value; 
			Message1 = value; Message2 = value; 
			TimeStamp = value"
	REFERENCE	""
  ::=  {  emsTraps  90  }

dbProcessDied NOTIFICATION-TYPE
	OBJECTS	{ 
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	obsolete
	DESCRIPTION	"Possible Error Source:
			1. Process Name, if local process is not running.
			2. 'Cannot_connect_database' if local DB is unreachable.
			3. 'Cannot_connect_' if remote DB is unreachable.
			Threshhold: 100, Throttle: 0; Report Index: 12, 
			Category: database, Level: critical; 
			The details contains syntax in the form of:
			HostName = value; DatabaseName = value; 
			ErrorSource = value; Message = value; 
			TimeStamp = value"
	REFERENCE	""
  ::=  {  emsTraps  91  }

dbPerformanceAlert NOTIFICATION-TYPE
	OBJECTS	{ 
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	obsolete
	DESCRIPTION	"EMS database performance alert.  
			See StatEvenName.
			Threshhold: 100, Throttle: 0; Report Index: 13, 
			Category: database, Level: major; 
			The details contains syntax in the form of:
			HostName = value; DatabaseName = value; 
			StatEventName = value; Value1 = value; 
			Value2 = value; Message = value; 
			TimeStamp = value"
	REFERENCE	""
  ::=  {  emsTraps  92  }

maintBinaryDoesNotExist NOTIFICATION-TYPE
	OBJECTS	{ 
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	obsolete
	DESCRIPTION	"PGM: Binary does not exist for Process.  
			Platform not installed correctly.
			Threshhold: 100, Throttle: 0; Report Index: 40, 
			Category: maintenance, Level: critical; 
			The details contains syntax in the form of:
			ProgramName = value; ExecutableName = value"
	REFERENCE	""
  ::=  {  emsTraps  93  }

maintNumHBMsgsRcvdIncorrect NOTIFICATION-TYPE
	OBJECTS	{ 
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	obsolete
	DESCRIPTION	"KAM: No. of HB Messages received is less than 50% of 
			expected.  
			Network problem.
			Threshhold: 100, Throttle: 0; Report Index: 42, 
			Category: maintenance, Level: minor; 
			The details contains syntax in the form of:
			InterfaceName = value; Address = value; 
			ExpectedHBMessages = value; HBMessagesReceived = value"
	REFERENCE	""
  ::=  {  emsTraps  94  }

maintProcessFailedUpInActiveMode NOTIFICATION-TYPE
	OBJECTS	{ 
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	obsolete
	DESCRIPTION	"PMG: Process failed to come up in active mode.  
			Software or configuration problem.
			Threshhold: 100, Throttle: 0; Report Index: 43, 
			Category: maintenance, Level: critical; 
			The details contains syntax in the form of:
			ProcessName = value; ProcessGroup = value"
	REFERENCE	""
  ::=  {  emsTraps  95  }

maintProcessFailedUpInStandbyMode NOTIFICATION-TYPE
	OBJECTS	{ 
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	obsolete
	DESCRIPTION	"PMG: Process failed to come up in standby mode.  
			Software or configuration problem.
			Threshhold: 100, Throttle: 0; Report Index: 44, 
			Category: maintenance, Level: critical; 
			The details contains syntax in the form of:
			ProcessName = value; ProcessGroup = value"
	REFERENCE	""
  ::=  {  emsTraps  96  }

maintAppInstStateChangeFailure NOTIFICATION-TYPE
	OBJECTS	{ 
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	obsolete
	DESCRIPTION	"Application Instance State Change Failure.  
			Switchover of application instance failed because of 
			a platform fault.
			Threshhold: 100, Throttle: 0; Report Index: 45, 
			Category: maintenance, Level: major; 
			The details contains syntax in the form of:
			ApplicationInstance = value; FailureReason = value"
	REFERENCE	""
  ::=  {  emsTraps  97  }

billingFTPParamInvalid NOTIFICATION-TYPE
	OBJECTS	{ 
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	obsolete
	DESCRIPTION	"Billing FTP Parameters Invalid.  
			One or more parameters were null.
			Threshhold: 100, Throttle: 0; Report Index: 33, 
			Category: billing, Level: major; 
			The details contains syntax in the form of:
			Billing Server Direct = value; Billing Servie Addre = value;
			FTP user name=value"
	REFERENCE	""
  ::=  {  emsTraps  98  }

dbTableSizeExceedsMinorThresh NOTIFICATION-TYPE
	OBJECTS	{ 
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	obsolete
	DESCRIPTION	"Table Size Exceeds Minor Threshold Limit.  
			The pre-provisioned size for the stated table is nearing the 
			licensed limit on the number of entries it can hold.
			Threshhold: 100, Throttle: 0; Report Index: 14, 
			Category: database, Level: minor; 
			The details contains syntax in the form of:
			TableName = value"
	REFERENCE	""
  ::=  {  emsTraps  99  }

dbTableSizeExceedsMajorThresh NOTIFICATION-TYPE
	OBJECTS	{ 
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	obsolete
	DESCRIPTION	"Table Size Exceeds Major Threshold Limit.  
			Major threshold limit exceeded.
			Threshhold: 100, Throttle: 0; Report Index: 15, 
			Category: database, Level: major; 
			The details contains syntax in the form of:
			TableName = value"
	REFERENCE	""
  ::=  {  emsTraps  100  }

dbTableSizeExceedsCriticalThresh NOTIFICATION-TYPE
	OBJECTS	{ 
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	obsolete
	DESCRIPTION	"Table Size Exceeds Critical Threshold Limit.  
			Critical threshold limit exceeded.
			Threshhold: 100, Throttle: 0; Report Index: 16, 
			Category: database, Level: critical; 
			The details contains syntax in the form of:
			TableName = value"
	REFERENCE	""
  ::=  {  emsTraps  101  }

allBillingLinksAtCADownOld NOTIFICATION-TYPE
	OBJECTS	{ 
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	obsolete
	DESCRIPTION	"All Billing Links at Call Agent Down.  
			Cable has been pulled.
			(or)
			(ifconfig down) has been performed on the interfaces.
			Threshhold: 100, Throttle: 0; Report Index: 34, 
			Category: billing, Level: critical; 
			There are no details associated"
	REFERENCE	""
  ::=  {  emsTraps  102  }

allBillingLinksAtBillingServerDownOld NOTIFICATION-TYPE
	OBJECTS	{ 
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	obsolete
	DESCRIPTION	"All Billing Links at Billing Server Down.  
			Cable may have been pulled.
			(or)
			(ifconfig down) may have been performed on the 
			interfaces.
			Threshhold: 100, Throttle: 0; Report Index: 35, 
			Category: billing, Level: critical; 
			There are no details associated"
	REFERENCE	""
  ::=  {  emsTraps  103  }

threadWatchdogCounterExpired NOTIFICATION-TYPE
	OBJECTS	{ 
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	obsolete
	DESCRIPTION	"Thread watchdog counter expired for a thread.  
			Software error.
			Threshhold: 100, Throttle: 0; Report Index: 47, 
			Category: maintenance, Level: critical; 
			The details contains syntax in the form of:
			Process Name = value; Thread Type = value; 
			Thread Instance = value"
	REFERENCE	""
  ::=  {  emsTraps  104  }

idxTableUsageExceedMinorThresh NOTIFICATION-TYPE
	OBJECTS	{ 
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	obsolete
	DESCRIPTION	"IDX Table Usage Exceeded Minor Usage Threshhold Level.
			Table not large enough.
			(or)
			Table not matched well with EMS.
			(or)
			System is over provisioned.
			Threshhold: 100, Throttle: 0; Report Index: 48, 
			Category: maintenance, Level: minor; 
			The details contains syntax in the form of:
			Table Name = value; Size = value; 
			Used = value"
	REFERENCE	""
  ::=  {  emsTraps  105  }

idxTableUsageExceedMajorThresh NOTIFICATION-TYPE
	OBJECTS	{ 
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	obsolete
	DESCRIPTION	"IDX Table Usage Exceeded Major Usage Threshhold Level.
			Table not large enough.
			(or)
			Table not matched well with EMS.
			(or)
			System is over provisioned.
			Threshhold: 100, Throttle: 0; Report Index: 49, 
			Category: maintenance, Level: major; 
			The details contains syntax in the form of:
			Table Name = value; Table Size = value; 
			Used = value"
	REFERENCE	""
  ::=  {  emsTraps  106  }

idxTableUsageExceedCriticalThresh NOTIFICATION-TYPE
	OBJECTS	{ 
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	obsolete
	DESCRIPTION	"IDX Table Usage Exceeded Critical Usage Threshhold 
			Level.  
			Table not large enough.
			(or)
			Table not matched well with EMS.
			(or)
			System is over provisioned.
			Threshhold: 100, Throttle: 0; Report Index: 50, 
			Category: maintenance, Level: critical; 
			The details contains syntax in the form of:
			Table Name = value; Table Size = value; 
			Used = value"
	REFERENCE	""
  ::=  {  emsTraps  107  }

aProcXceeds70PercUsage NOTIFICATION-TYPE
	OBJECTS	{ 
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	obsolete
	DESCRIPTION	"A Process Exceeds 70 Percent CPU Utilization.  
			A process has entered a state of erratic behavior.
			Threshhold: 100, Throttle: 0; Report Index: 51, 
			Category: maintenance, Level: major; 
			The details contains syntax in the form of:
			Hostname = value; PID = value ; 
			Process Name = value; CPU Usage = value"
	REFERENCE	""
  ::=  {  emsTraps  108  }

cpuUsageOver90Percent NOTIFICATION-TYPE
	OBJECTS	{ 
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	obsolete
	DESCRIPTION	"The CPU usage is over 90 Percent busy.  
			Threshhold: 100, Throttle: 0; Report Index: 53, 
			Category: maintenance, Level: critical; 
			The details contains syntax in the form of:
			Hostname = value; CPU Usage = value"
	REFERENCE	""
  ::=  {  emsTraps  109  }

loadAverageXceeds3For5Min NOTIFICATION-TYPE
	OBJECTS	{ 
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	obsolete
	DESCRIPTION	"The load average exceeds 3 for at least 5 minutes.  
			Multiple processes are vying for processing time on the 
			system, which is normal in a high traffic situation such as 
			heavy call processing or bulk provisioning.
			Threshhold: 100, Throttle: 0; Report Index: 55, 
			Category: maintenance, Level: major; 
			The details contains syntax in the form of:
			Hostname = value; Load Average = value"
	REFERENCE	""
  ::=  {  emsTraps  110  }

mem95PercentExhaustAndSwapIs50Percent NOTIFICATION-TYPE
	OBJECTS	{ 
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	obsolete
	DESCRIPTION	"Memory is 95 Percent exhausted and the swap is 50 
			Percent consumed.  
			A process or multiple processes have consumed more than 95% of 
			the memory on the system and the operating system is utilizing more 
			than 50% of the swap space for process execution. This can be a 
			result of high call rates or bulk provisioning activity.
			Threshhold: 100, Throttle: 0; Report Index: 57, 
			Category: maintenance, Level: critical; 
			The details contains syntax in the form of:
			Hostname = value; Memory = value; 
			Swap = value"
	REFERENCE	""
  ::=  {  emsTraps  111  }

diskReportsXceeds70Percent NOTIFICATION-TYPE
	OBJECTS	{ 
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	obsolete
	DESCRIPTION	"Disk reports greater than 70 percent utilization.  
			Threshhold: 100, Throttle: 0; Report Index: 59, 
			Category: maintenance, Level: major; 
			The details contains syntax in the form of:
			Hostname = value; Disk = value; 
			Usage = value"
	REFERENCE	""
  ::=  {  emsTraps  112  }

snmpAuthenticationErr NOTIFICATION-TYPE
	OBJECTS	{ 
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	obsolete
	DESCRIPTION	"SNMP Authentication Error.  
			NMS issuing wrong community string.
			Threshhold: 100, Throttle: 0; Report Index: 9, 
			Category: oss, Level: minor; 
			The details contains syntax in the form of:
			RemoteHost = value"
	REFERENCE	""
  ::=  {  emsTraps  113  }

noHBMsgsRcvdThroughIntf    NOTIFICATION-TYPE
        OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
                alarmComponentID,
                alarmComponentType,
                alarmDetails,
                alarmTime,
                alarmSetCleared
                }

        STATUS	obsolete
	DESCRIPTION	"No HB messages received through the interface.
			Local network interface is down.
			(or)
			Mate network interface on the same subnet.
			(or)
			Network congestion.
			Threshold=100, Throttle=0, ReportIndex:61,
			Category: maintenance, Level:critical;
			The details contain syntax in the form:
			Interface Name = value; Interface IP Address = value."
        REFERENCE       ""
  ::=  {  emsTraps  114  }

linkMonIntfLostComm    NOTIFICATION-TYPE
        OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
                alarmComponentID,
                alarmComponentType,
                alarmDetails,
                alarmTime,
                alarmSetCleared
                }

        STATUS	obsolete
	DESCRIPTION	"Link Monitor: Interface lost communication.
			Interface cable is pulled out; interface is set down 
			using ifconfig command.
			Threshold=0, Throttle=100, ReportIndex:62,
			Category: maintenance, Level:major;
			The details contain syntax in the form:
			Interface Name = value; Interface IP Address = value."  
        REFERENCE       ""
  ::=  {  emsTraps  115  }

outgoingHBPeriodExceeded    NOTIFICATION-TYPE
        OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
                alarmComponentID,
                alarmComponentType,
                alarmDetails,
                alarmTime,
                alarmSetCleared
                }

        STATUS	obsolete
	DESCRIPTION	"Outgoing HB period exceeded limit.
			This is caused by system performance degradation due to CPU 
			overload or excessive I/O operations.
			Threshold=100, Throttle=0, ReportIndex:63,
			Category: maintenance, Level:major;
			The details contain syntax in the form:
			Max HB period 'ms' = value; HB period 'ms' = value."  
        REFERENCE       ""
  ::=  {  emsTraps  116  }

avgOutgoingHBPeriodExceeded    NOTIFICATION-TYPE
        OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
                alarmComponentID,
                alarmComponentType,
                alarmDetails,
                alarmTime,
                alarmSetCleared
                }

        STATUS	obsolete
	DESCRIPTION	"Outgoing HB period exceeds Maj Alarm limit
			This is caused by system performance degradation due to CPU 
			overload or excessive I/O operations.
			Threshold=100, Throttle=0, ReportIndex:64,
			Category: maintenance, Level:major;
			The details contain syntax in the form:
			Max Avg HB period = value; Avg HB period = value."  
        REFERENCE       ""
  ::=  {  emsTraps  117  }

diskPartition90PercentConsumed    NOTIFICATION-TYPE
        OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
                alarmComponentID,
                alarmComponentType,
                alarmDetails,
                alarmTime,
                alarmSetCleared
                }

        STATUS	obsolete
	DESCRIPTION	"Disk Partition Critically Consumed.
			A process or processes is/are writing extraneous data 
			to the named parition.
			Threshold=100, Throttle=0, ReportIndex:65,
			Category: maintenance, Level:critical;
			The details contain syntax in the form:
			Directory = value; Device = value;
			Percentage Used = value."  
        REFERENCE       ""
  ::=  {  emsTraps  118  }

freeIPCPoolBuffBelowMinorThresh    NOTIFICATION-TYPE
        OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
                alarmComponentID,
                alarmComponentType,
                alarmDetails,
                alarmTime,
                alarmSetCleared
                }

        STATUS	obsolete
	DESCRIPTION	"The free IPC pool buffers below minor threshold.
			IPC pool buffers are not being freed properly by the application 
			or the application is not able to keep up with the incoming IPC 
			messaging traffic.
			Threshold=100, Throttle=0, ReportIndex:67,
			Category: maintenance, Level:minor;
			The details contain syntax in the form:
			Free ipc pool buffer = value; Threshold = value."  
        REFERENCE       ""
  ::=  {  emsTraps  119  }

freeIPCPoolBuffBelowMajorThresh    NOTIFICATION-TYPE
        OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
                alarmComponentID,
                alarmComponentType,
                alarmDetails,
                alarmTime,
                alarmSetCleared
                }

        STATUS	obsolete
	DESCRIPTION	"The free IPC pool buffers below major threshold.
			IPC pool buffers are not being freed properly by the application 
			or the application is not able to keep up with the incoming IPC 
			messaging traffic.
			Threshold=100, Throttle=0, ReportIndex:68,
			Category: maintenance, Level:major;
			The details contain syntax in the form:
			Free ipc pool buffer = value; Threshold = value."  
        REFERENCE       ""
  ::=  {  emsTraps  120  }

freeIPCPoolBuffBelowCriticalThresh    NOTIFICATION-TYPE
        OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
                alarmComponentID,
                alarmComponentType,
                alarmDetails,
                alarmTime,
                alarmSetCleared
                }

        STATUS	obsolete
	DESCRIPTION	"The free IPC pool buffers below critical threshold.
			IPC pool buffers are not being freed properly by the application 
			or the application is not able to keep up with the incoming IPC 
			messaging traffic.
			Threshold=100, Throttle=0, ReportIndex:69,
			Category: maintenance, Level:critical;
			The details contain syntax in the form:
			Free ipc pool buffer = value; Threshold = value."  
        REFERENCE       ""
  ::=  {  emsTraps  121  }

freeIPCPoolBuffCountBelowMinRequired    NOTIFICATION-TYPE
        OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
                alarmComponentID,
                alarmComponentType,
                alarmDetails,
                alarmTime,
                alarmSetCleared
                }

        STATUS	obsolete
	DESCRIPTION	"The free IPC pool buffer count below minimum 
			required for sh.
			IPC pool buffers are not being freed properly by the application 
			or the application is not able to keep up with the incoming IPC 
			messaging traffic.
			Threshold=100, Throttle=0, ReportIndex:70,
			Category: maintenance, Level:critical;
			The details contain syntax in the form:
			Free ipc buffer count = value; minimum count = value."  
        REFERENCE       ""
  ::=  {  emsTraps  122  }

billingLinkFailureOld    NOTIFICATION-TYPE
        OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
                alarmComponentID,
                alarmComponentType,
                alarmDetails,
                alarmTime,
                alarmSetCleared
                }

        STATUS	obsolete
	DESCRIPTION	"Billing Link Failure.
			Threshold=100, Throttle=0, ReportIndex:37,
			Category: billing, Level:major;
			The details contain syntax in the form:
			Interface name = value"
        REFERENCE       ""
  ::=  {  emsTraps  123  }

platformConfigError    NOTIFICATION-TYPE
        OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
                alarmComponentID,
                alarmComponentType,
                alarmDetails,
                alarmTime,
                alarmSetCleared
                }

        STATUS	obsolete
	DESCRIPTION	"Configuration Error in Platform file.
			Wrong configuration in the platform.cfg.
			Threshold=100, Throttle=0, ReportIndex:4,
			Category: config, Level:critical;
			The details contain syntax in the form:
			Reason = value."
        REFERENCE       ""
  ::=  {  emsTraps  124  }

dbReplicationCopyFailed    NOTIFICATION-TYPE
        OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
                alarmComponentID,
                alarmComponentType,
                alarmDetails,
                alarmTime,
                alarmSetCleared
                }

        STATUS	obsolete
	DESCRIPTION	"Replication of data failed during DB Copy.
			Threshold=100, Throttle=0, ReportIndex:17,
			Category: database, Level:major;
			The details contain syntax in the form:
			Table Name = value; Index = value;
			Table ID = value."
        REFERENCE       ""
  ::=  {  emsTraps  125  }

oneExternalDNSNoResponse    NOTIFICATION-TYPE
        OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
                alarmComponentID,
                alarmComponentType,
                alarmDetails,
                alarmTime,
                alarmSetCleared
                }

        STATUS	obsolete
	DESCRIPTION	"DNS service response is slow.
			DNS servers or the netwrok may be down.
			Threshold=100, Throttle=0, ReportIndex:72,
			Category: maintenance, Level:major;
			There are no details associated."
        REFERENCE       ""
  ::=  {  emsTraps  126  }

allExternalDNSNoResponse    NOTIFICATION-TYPE
        OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
                alarmComponentID,
                alarmComponentType,
                alarmDetails,
                alarmTime,
                alarmSetCleared
                }

        STATUS	obsolete
	DESCRIPTION	"All external DNS server(s) are not responsive.
			DNS servers or the netwrok may be down.
			Threshold=100, Throttle=0, ReportIndex:73,
			Category: maintenance, Level:critical;
			There are no details associated."
        REFERENCE       ""
  ::=  {  emsTraps  127  }

localServerNotResponsive    NOTIFICATION-TYPE
        OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
                alarmComponentID,
                alarmComponentType,
                alarmDetails,
                alarmTime,
                alarmSetCleared
                }

        STATUS	obsolete
	DESCRIPTION	"Local server not responsive.
			This is a future trap that is not yet implemented. The BTS will 
			not issue this trap in the 3.x release series.
			Threshold=100, Throttle=0, ReportIndex:74,
			Category: maintenance, Level:critical;
			The details contain syntax in the form:
			the name of the loca = value."
        REFERENCE       ""
  ::=  {  emsTraps  128  }

ipAddrDNSMismatch    NOTIFICATION-TYPE
        OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
                alarmComponentID,
                alarmComponentType,
                alarmDetails,
                alarmTime,
                alarmSetCleared
                }

        STATUS  obsolete
	DESCRIPTION	"Mismatch of IP addr % local server and DNS.
			DNS updates are not getting to the BTS from the external server, or 
			the discrepancy was detected before the local DNS lookup table was 
			updated.
			Threshold=100, Throttle=0, ReportIndex:75,
			Category: maintenance, Level:major;
			The details contain syntax in the form:
			hostname = value; IP Addr local server = value;
			IP Addr remote server = value."
        REFERENCE       ""
  ::=  {  emsTraps  129  }

mateTimeDiffersBeyondToleranceOld    NOTIFICATION-TYPE
        OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
                alarmComponentID,
                alarmComponentType,
                alarmDetails,
                alarmTime,
                alarmSetCleared
                }

        STATUS	obsolete
	DESCRIPTION	"Mate time differs beyond tolerance.
			Time synchronization not working.
			Threshold=100, Throttle=0, ReportIndex:77,
			Category: maintenance, Level:major;
			The details contain syntax in the form:
			Max time difference = value; Actual time differen = value."
        REFERENCE       ""
  ::=  {  emsTraps  130  }

avgOutHBPeriodExceedsLimit    NOTIFICATION-TYPE
        OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
                alarmComponentID,
                alarmComponentType,
                alarmDetails,
                alarmTime,
                alarmSetCleared
                }

        STATUS	obsolete
	DESCRIPTION	"Average outgoing HB period exceeds Critical limit
			Threshold=1, Throttle=0, ReportIndex:82,
			Category: maintenance, Level:critical;
			The details contain syntax in the form:
			Critical Threshold = value; Current Avg. HB period = value."
        REFERENCE       ""
  ::=  {  emsTraps  131  }

emLogFileAccessErrorOld    NOTIFICATION-TYPE
        OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
                alarmComponentID,
                alarmComponentType,
                alarmDetails,
                alarmTime,
                alarmSetCleared
                }

        STATUS	obsolete
	DESCRIPTION	"EM Log file access error
			Threshold=50, Throttle=0, ReportIndex:38,
			Category: billing, Level:major;
			The details contain syntax in the form:
			Type Of access error = value; Reason for err = value;
			Sequence number off = value; Idx of evt message = value;
			Location tag = value."
        REFERENCE       ""
  ::=  {  emsTraps  132  }

radiusAcctingRcvFailure    NOTIFICATION-TYPE
        OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
                alarmComponentID,
                alarmComponentType,
                alarmDetails,
                alarmTime,
                alarmSetCleared
                }

        STATUS	obsolete
	DESCRIPTION	"RADIUS Accounting receive failure
			Threshold=25, Throttle=0, ReportIndex:39,
			Category: billing, Level:minor;
			The details contain syntax in the form:
			Location Tag = value."
        REFERENCE       ""
  ::=  {  emsTraps  133  }

emEncodeFailureOld    NOTIFICATION-TYPE
        OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
                alarmComponentID,
                alarmComponentType,
                alarmDetails,
                alarmTime,
                alarmSetCleared
                }

        STATUS	obsolete
	DESCRIPTION	"EM encode failure.
			There is a problem with the format of the data to be 
			sent to the RKS.
			Threshold=100, Throttle=0, ReportIndex:40,
			Category: billing, Level:minor;
			The details contain syntax in the form:
			Location tage = value."
        REFERENCE       ""
  ::=  {  emsTraps  134  }

messageContentErr    NOTIFICATION-TYPE
        OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
                alarmComponentID,
                alarmComponentType,
                alarmDetails,
                alarmTime,
                alarmSetCleared
                }

        STATUS	obsolete
	DESCRIPTION	"Message content error
			Threshold=100, Throttle=0, ReportIndex:41,
			Category: billing, Level:minor;
			The details contain syntax in the form:
			Message type = value; Field name = value;
			Field value(text) = value; Field value (numeric) = value;
			Location tag = value."
        REFERENCE       ""
  ::=  {  emsTraps  135  }

ipcQueueReadFailureOld    NOTIFICATION-TYPE
        OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
                alarmComponentID,
                alarmComponentType,
                alarmDetails,
                alarmTime,
                alarmSetCleared
                }

        STATUS	obsolete
	DESCRIPTION	"IPC queue read failure
			Threshold=100, Throttle=0, ReportIndex:2,
			Category: system, Level:minor;
			The details contain syntax in the form:
			Queue name = value; Location tage = value."
        REFERENCE       ""
  ::=  {  emsTraps  136  }

ipcMsgAllocateFailure    NOTIFICATION-TYPE
        OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
                alarmComponentID,
                alarmComponentType,
                alarmDetails,
                alarmTime,
                alarmSetCleared
                }

        STATUS	obsolete
	DESCRIPTION	"IPC message allocate failure
			Threshold=100, Throttle=0, ReportIndex:3,
			Category: system, Level:minor;
			The details contain syntax in the form:
			Requested size = value; Error code = value;
			Location tag = value."
        REFERENCE       ""
  ::=  {  emsTraps  137  }

ipcMsgSendFailure    NOTIFICATION-TYPE
        OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
                alarmComponentID,
                alarmComponentType,
                alarmDetails,
                alarmTime,
                alarmSetCleared
                }

        STATUS	obsolete
	DESCRIPTION	"IPC message send failure
			Threshold=50, Throttle=0, ReportIndex:4,
			Category: system, Level:minor;
			The details contain syntax in the form:
			Error code = value; Destination process = value;
			Message number = value; Location tag = value."
        REFERENCE       ""
  ::=  {  emsTraps  138  }

idxListInsertErr    NOTIFICATION-TYPE
        OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
                alarmComponentID,
                alarmComponentType,
                alarmDetails,
                alarmTime,
                alarmSetCleared
                }

        STATUS	obsolete
	DESCRIPTION	"IDX list insert error
			Threshold=100, Throttle=0, ReportIndex:6,
			Category: system, Level:minor;
			The details contain syntax in the form:
			List name = value; Index of entry being = value;
			Location tag = value."
        REFERENCE       ""
  ::=  {  emsTraps  139  }

idxListRemoveErr    NOTIFICATION-TYPE
        OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
                alarmComponentID,
                alarmComponentType,
                alarmDetails,
                alarmTime,
                alarmSetCleared
                }

        STATUS	obsolete
	DESCRIPTION	"IDX list remove error
			Threshold=100, Throttle=0, ReportIndex:7,
			Category: system, Level:minor;
			The details contain syntax in the form:
			List name = value; Index of entry being = value;
			Location tag = value."
        REFERENCE       ""
  ::=  {  emsTraps  140  }

threadCreationFailureOld    NOTIFICATION-TYPE
        OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
                alarmComponentID,
                alarmComponentType,
                alarmDetails,
                alarmTime,
                alarmSetCleared
                }

        STATUS	obsolete
	DESCRIPTION	"Thread creation failure
			Threshold=100, Throttle=0, ReportIndex:8,
			Category: system, Level:major;
			The details contain syntax in the form:
			Error code = value; Thread name = value;
			Location tag = value."
        REFERENCE       ""
  ::=  {  emsTraps  141  }

swapSpaceBelowMinorThresh    NOTIFICATION-TYPE
        OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
                alarmComponentID,
                alarmComponentType,
                alarmDetails,
                alarmTime,
                alarmSetCleared
                }

        STATUS	obsolete
	DESCRIPTION	"Swap Space below minor threshold.
			Threshold=100, Throttle=0, ReportIndex:83,
			Category: Maintenance, Level:minor;
			The details contain syntax in the form:
			Minor threshold(MB) = value; Current value(MB) = value."
        REFERENCE       ""
  ::=  {  emsTraps  142  }

swapSpaceBelowMajorThresh    NOTIFICATION-TYPE
        OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
                alarmComponentID,
                alarmComponentType,
                alarmDetails,
                alarmTime,
                alarmSetCleared
                }

        STATUS	obsolete
	DESCRIPTION	"Swap space below major threashold.
			Threshold=100, Throttle=0, ReportIndex:84,
			Category: Maintenance, Level:major;
			The details contain syntax in the form:
			Major threshold(MB) = value; Current value(MB) = value."
        REFERENCE       ""
  ::=  {  emsTraps  143  }

swapSpaceBelowCriticalThresh    NOTIFICATION-TYPE
        OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
                alarmComponentID,
                alarmComponentType,
                alarmDetails,
                alarmTime,
                alarmSetCleared
                }

        STATUS	obsolete
	DESCRIPTION	"Swap space below critical threshold.
			Threshold=100, Throttle=0, ReportIndex:85,
			Category: Maintenance, Level:critical;
			The details contain syntax in the form:
			Critical threshold(MB) = value; Current value(MB) = value."
        REFERENCE       ""
  ::=  {  emsTraps  144  }

invalidBillingConfig    NOTIFICATION-TYPE
        OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
                alarmComponentID,
                alarmComponentType,
                alarmDetails,
                alarmTime,
                alarmSetCleared
                }

        STATUS  obsolete
	DESCRIPTION	"Invalid billing configuration - program exiting.
			The Call Agent is provisioned to have both CDB billing 
			and EM billing enabled, or is provisioned to have no 
			billing enabled. 
			Threshold=50, Throttle=0, ReportIndex:43,
			Category: Billing, Level:major;
			The details contain syntax in the form:
			Table name = value; Table name = value;
			Location tag = value."
        REFERENCE       ""
  ::=  {  emsTraps  145  }

idxUpdateRegistrationErr    NOTIFICATION-TYPE
        OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
                alarmComponentID,
                alarmComponentType,
                alarmDetails,
                alarmTime,
                alarmSetCleared
                }

        STATUS	obsolete
	DESCRIPTION	"IDX update registration error.
			Application unsuccessfully requested to be notified of 
			table changes. 
			Threshold=100, Throttle=0, ReportIndex:10,
			Category: System, Level:minor;
			The details contain syntax in the form:
			Error code = value; Table name = value;
			Location tag = value."
        REFERENCE       ""
  ::=  {  emsTraps  146  }

idxTableAddEntryErr    NOTIFICATION-TYPE
        OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
                alarmComponentID,
                alarmComponentType,
                alarmDetails,
                alarmTime,
                alarmSetCleared
                }

        STATUS	obsolete
	DESCRIPTION	"IDX table add - entry error.
			Internal error.
			Threshold=100, Throttle=0, ReportIndex:11,
			Category: System, Level:minor;
			The details contain syntax in the form:
			Table name = value; Index of entry being = value;
			Error code = value; Location tag = value."
        REFERENCE       ""
  ::=  {  emsTraps  147  }

rksUnreachableFor1Hour NOTIFICATION-TYPE
	OBJECTS	{ 
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	obsolete
	DESCRIPTION	"RKSs unreachable for 1 hour.
			Billing has not been able to communicate with any 
			RKS for the past one hour.
			Threshold=25, Throttle=0, ReportIndex:47,
			Category: billing, Level:minor,
			The details contain syntax in the form:
			Location tag = value."
        REFERENCE       ""
  ::=  {  emsTraps  148  }

rksUnreachableFor3Hour NOTIFICATION-TYPE
	OBJECTS	{ 
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	obsolete
	DESCRIPTION	"RKSs unreachable for 3 hours.
			Billing has not been able to communicate with any 
			RKS for the past three hours.
			Threshold=25, Throttle=0, ReportIndex:48,
			Category: billing, Level:major,
			The details contain syntax in the form:
			Location tag = value."
        REFERENCE       ""
  ::=  {  emsTraps  149  }

rksUnreachableFor5Hour NOTIFICATION-TYPE
	OBJECTS	{ 
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	obsolete
	DESCRIPTION	"RKSs unreachable for 5 hours.
			Billing has not been able to communicate with any 
			RKS for the past five hours.
			Threshold=25, Throttle=0, ReportIndex:49,
			Category: billing, Level:critical,
			The details contain syntax in the form:
			Location tag = value."
        REFERENCE       ""
  ::=  {  emsTraps  150  }

ipcInputQEnteredThrottleState    NOTIFICATION-TYPE
        OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
                alarmComponentID,
                alarmComponentType,
                alarmDetails,
                alarmTime,
                alarmSetCleared
                }

        STATUS	obsolete
	DESCRIPTION	"IPC Input Queue Entered Throttle State.
			The indicated thread is not able to process its IPC input 
			messages fast enough, hence the input queue has grown too 
			large and is using up too much of the IPC memory pool 
			resource.
			Threshold=500, Throttle=0, ReportIndex:97,
			Category: Maintenance, Level: critical;
			The details contain syntax in the form:
			Process Name = value; Thread Type =;
			Thread Instance = value; Hi Watermark = value;
			Lo Watermark = value."
        REFERENCE       ""
  ::=  {  emsTraps  151  }


ipcInputQAt25PctHiWatermark    NOTIFICATION-TYPE
        OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
                alarmComponentID,
                alarmComponentType,
                alarmDetails,
                alarmTime,
                alarmSetCleared
                }

        STATUS	obsolete
	DESCRIPTION	"IPC Input Queue Depth at 25 Percent of its Hi Watermark.
			The indicated thread is not able to process its IPC input 
			messages fast enough, hence the input queue has grown too 
			large and is at 25% of the level at which it will enter 
			the throttle state.
			Threshold=500, Throttle=0, ReportIndex:98,
			Category: Maintenance, Level: minor;
			The details contain syntax in the form:
			Process Name = value; Thread Type = value;
			Thread Instance = value; Hi Watermark = value;
			Lo Watermark = value."
        REFERENCE       ""
  ::=  {  emsTraps  152  }


ipcInputQAt50PctHiWatermark    NOTIFICATION-TYPE
        OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
                alarmComponentID,
                alarmComponentType,
                alarmDetails,
                alarmTime,
                alarmSetCleared
                }

        STATUS	obsolete
	DESCRIPTION	"IPC Input Queue Depth at 50 Percent of its Hi Watermark.
			The indicated thread is not able to process its IPC input 
			messages fast enough, hence the input queue has grown too 
			large and is at 50% of the level at which it will enter 
			the throttle state.
			Threshold=500, Throttle=0, ReportIndex:99,
			Category: Maintenance, Level: major;
			The details contain syntax in the form:
			Process Name = value; Thread Type = value;
			Thread Instance = value; Hi Watermark = value;
			Lo Watermark = value."
        REFERENCE       ""
  ::=  {  emsTraps  153  }

ipcInputQAt75PctHiWatermark    NOTIFICATION-TYPE
        OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
                alarmComponentID,
                alarmComponentType,
                alarmDetails,
                alarmTime,
                alarmSetCleared
                }

        STATUS	obsolete
	DESCRIPTION	"IPC Input Queue Depth at 75 Percent of its Hi Watermark.
			The indicated thread is not able to process its IPC input 
			messages fast enough, hence the input queue has grown too 
			large and is at 75% of the level at which it will enter 
			the throttle state.
			Threshold=500, Throttle=0, ReportIndex:100,
			Category: Maintenance, Level: critical;
			The details contain syntax in the form:
			Process Name = value; Thread Type = value;
			Thread Instance = value; Hi Watermark = value;
			Lo Watermark = value."
        REFERENCE       ""
  ::=  {  emsTraps  154  }

adpReportedAuditFailure    NOTIFICATION-TYPE
        OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
                alarmComponentID,
                alarmComponentType,
                alarmDetails,
                alarmTime,
                alarmSetCleared
                }

        STATUS	obsolete
	DESCRIPTION	"Critical Internal Audit Failure
			Threshold=100, Throttle=0, ReportIndex:5,
			Category: Audit, Level: critical;
			The details contain syntax in the form:
			Failure Details = value; Probable Causes = value;
			Corrective Actions = value."
        REFERENCE       ""
  ::=  {  emsTraps  155  }


eventMsgDiskSpace50PctFull    NOTIFICATION-TYPE
        OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
                alarmComponentID,
                alarmComponentType,
                alarmDetails,
                alarmTime,
                alarmSetCleared
                }

        STATUS	obsolete
	DESCRIPTION	"Event Message disk space 50 percent full.
			Event Message storage has reached 50% of the maximum storage allowed.
			Threshold=100, Throttle=0, ReportIndex:53,
			Category: Billing, Level: minor;
			The details contain syntax in the form:
			Number of megabytes used for Eve = value; 
			Directory containing Event Messa = value; Location tag = value."
        REFERENCE       ""
  ::=  {  emsTraps  156  }

eventMsgDiskSpace70PctFull    NOTIFICATION-TYPE
        OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
                alarmComponentID,
                alarmComponentType,
                alarmDetails,
                alarmTime,
                alarmSetCleared
                }

        STATUS	obsolete
	DESCRIPTION	"Event Message disk space 70 percent full.
			Event Message storage has reached 70% of the maximum storage allowed.
			Threshold=100, Throttle=0, ReportIndex:54,
			Category: Billing, Level: major;
			The details contain syntax in the form:
			Number of megabytes used for Eve = value; 
			Directory containing Event Messa = value; Location tag = value."
        REFERENCE       ""
  ::=  {  emsTraps  157  }

eventMsgDiskSpace100PctFull    NOTIFICATION-TYPE
        OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
                alarmComponentID,
                alarmComponentType,
                alarmDetails,
                alarmTime,
                alarmSetCleared
                }

        STATUS	obsolete
	DESCRIPTION	"Event Message disk space 100 percent full.
			Event Message storage has been completely filled. No additional 
			Event Messages will be written to disk until more space is made 
			available.
			Threshold=100, Throttle=0, ReportIndex:55,
			Category: Billing, Level: critical;
			The details contain syntax in the form:
			Number of megabytes used for Eve = value; 
			Directory containing Event Messa = value; Location tag = value."
        REFERENCE       ""
  ::=  {  emsTraps  158  }

diskPartitionSignificantlyConsumedOld    NOTIFICATION-TYPE
        OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
                alarmComponentID,
                alarmComponentType,
                alarmDetails,
                alarmTime,
                alarmSetCleared
                }

        STATUS	obsolete
	DESCRIPTION	"Disk Partition Significantly Consumed.
			A process or processes is/are writing extraneous data 
			to the named parition.
			Threshold=100, Throttle=0, ReportIndex:66,
			Category: maintenance, Level:major;
			The details contain syntax in the form:
			Directory = value; Device = value;
			Percentage Used = value."  
        REFERENCE       ""
  ::=  {  emsTraps  159  }

measuremntHandshakeErrSchemaInconsist NOTIFICATION-TYPE
	OBJECTS	{ 
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	obsolete
	DESCRIPTION	"Measurement Handshake Error: Schema Inconsistency.
			Counters added/deleted from schema in Oracle but not 
			in the Call Agent.
			Threshold=5, Throttle=0, ReportIndex:12,
			Category: statistics Level:major,
			The details contain syntax in the form:
			Schemas Out of Syncronization = value."
        REFERENCE       ""
  ::=  {  emsTraps  160  }

tmmAPIFailureOld NOTIFICATION-TYPE
	OBJECTS	{ 
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	obsolete
	DESCRIPTION	"tmm API failure.
			Unable to initialize shared memory.
			Threshold=1, Throttle=10, ReportIndex:13,
			Category: statistics, Level:major,
			The details contain syntax in the form:
			TMM error = value."
        REFERENCE       ""
  ::=  {  emsTraps  161  }

systemHealthReportCollectionErr NOTIFICATION-TYPE
	OBJECTS	{ 
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	obsolete
	DESCRIPTION	"System Health Report Collection Error.
			An error occur while collecting System Health Report.
			Threshold=100, Throttle=0, ReportIndex:86,
			Category: maintenance, Level:minor,
			The details contain syntax in the form:
			ErrString = value."
        REFERENCE       ""
  ::=  {  emsTraps  162  }

statusUpdateProcessRequestFailedOld NOTIFICATION-TYPE
	OBJECTS	{ 
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	obsolete
	DESCRIPTION	"Status Update Process Request Failed.
			'status' command not working properly.
			Threshold=100, Throttle=0, ReportIndex:87,
			Category: maintenance, Level:major,
			The details contain syntax in the form:
			ErrString = value; ComponentType = value."
        REFERENCE       ""
  ::=  {  emsTraps  163  }

statusUpdateProcessDBListRetrvErr NOTIFICATION-TYPE
	OBJECTS	{ 
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	obsolete
	DESCRIPTION	"Status Update Process DB List Retrieval Error.
			Oracle DB is not working properly.
			Threshold=100, Throttle=0, ReportIndex:88,
			Category: maintenance, Level:major,
			The details contain syntax in the form:
			ErrString = value."
        REFERENCE       ""
  ::=  {  emsTraps  164  }

statusUpdateProcessDBUpdateErr NOTIFICATION-TYPE
	OBJECTS	{ 
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	obsolete
	DESCRIPTION	"Status Update Process DB Update Error.
			MySQL DB on EMS is not working properly.
			Threshold=100, Throttle=0, ReportIndex:89,
			Category: maintenance, Level:major,
			The details contain syntax in the form:
			ErrString = value; SQLCommand = value."
        REFERENCE       ""
  ::=  {  emsTraps  165  }

diskPartitionModeratelyConsumedOld    NOTIFICATION-TYPE
        OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
                alarmComponentID,
                alarmComponentType,
                alarmDetails,
                alarmTime,
                alarmSetCleared
                }

        STATUS	obsolete
	DESCRIPTION	"Disk Partition Moderately Consumed.
			A process or processes is/are writing extraneous data 
			to the named parition.
			Threshold=100, Throttle=0, ReportIndex:90,
			Category: maintenance, Level:minor;
			The details contain syntax in the form:
			Directory = value; Device = value;
			Percentage Used = value."  
        REFERENCE       ""
  ::=  {  emsTraps  166  }

switchoverInProgressOld    NOTIFICATION-TYPE
        OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
                alarmComponentID,
                alarmComponentType,
                alarmDetails,
                alarmTime,
                alarmSetCleared
                }

        STATUS	obsolete
	DESCRIPTION	"Switchover in Progress.
			This alarm is issued when system switchover either 
			due to manual switchover (via CLI command), failover 
			or automatic switchover.
			Threshold=100, Throttle=0, ReportIndex:101,
			Category: maintenance, Level:critical;
			The details contain syntax in the form:
			Local state = value; Mate state = value;
			Reason = value."
        REFERENCE       ""
  ::=  {  emsTraps  167  }

billingDataCorruptionDetectedOld    NOTIFICATION-TYPE
        OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
                alarmComponentID,
                alarmComponentType,
                alarmDetails,
                alarmTime,
                alarmSetCleared
                }

        STATUS	obsolete
	DESCRIPTION	"Billing data corruption detected.
			Billing data stored on disk may have become corrupted 
			due to a power outage, ungraceful shutdown, or disk 
			failure.
			Threshold=100, Throttle=0, ReportIndex:56,
			Category: Billing, Level: critical;
			The details contain syntax in the form:
			File/table corrupted = value; Low end of records = value; 
			High end of records = value; Error code = value; 
			Location tag = value."
        REFERENCE       ""
  ::=  {  emsTraps  168  }

qamDbmIdxFailedWithErr    NOTIFICATION-TYPE
        OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
                alarmComponentID,
                alarmComponentType,
                alarmDetails,
                alarmTime,
                alarmSetCleared
                }

        STATUS	obsolete
	DESCRIPTION	"QAM DBM IDX Failed with Error.
			QAM is receiving an error because of Data Mismatch 
			between what is in DBM IDX and what is in EMS 
			db (oracle).
			(or)
			DBM IDX is failing when attempting to perform 
			SQL command.
			Threshold=50, Throttle=0, ReportIndex:10,
			Category: OSS, Level: major;
			The details contain syntax in the form:
			Transaction ID = value; Sequence Number = value; 
			Location Of Error = value; DBM Result = value."
        REFERENCE       ""
  ::=  {  emsTraps  169  }


replicationDataFlushTimeoutDuringSwitchoverOld	NOTIFICATION-TYPE
        OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
                alarmComponentID,
                alarmComponentType,
                alarmDetails,
                alarmTime,
                alarmSetCleared
                }

        STATUS	obsolete
	DESCRIPTION	"Replication data flush timeout during switchover.
			Replication Module software problem.
			Threshold=100, Throttle=0, ReportIndex:20,
			Category: Database, Level: major;
			The details contain syntax in the form:
			Tables failed = value."
        REFERENCE       ""
  ::=  {  emsTraps  170  }

adpReportedMajorAuditFailure	NOTIFICATION-TYPE
        OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
                alarmComponentID,
                alarmComponentType,
                alarmDetails,
                alarmTime,
                alarmSetCleared
                }

        STATUS	obsolete
	DESCRIPTION	"Major Internal Audit Failure.
			Threshold=100, Throttle=0, ReportIndex:6,
			Category: Audit, Level: major;
			The details contain syntax in the form:
			Failure Details = value; Probable Causes = value;
			Corrective Actions = value."
        REFERENCE       ""
  ::=  {  emsTraps  171  }

adpReportedMinorAuditFailure	NOTIFICATION-TYPE
        OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
                alarmComponentID,
                alarmComponentType,
                alarmDetails,
                alarmTime,
                alarmSetCleared
                }

        STATUS	obsolete
	DESCRIPTION	"Minor Internal Audit Failure.
			Threshold=100, Throttle=0, ReportIndex:7,
			Category: Audit, Level: minor;
			The details contain syntax in the form:
			Failure Details = value; Probable Causes = value;
			Corrective Actions = value."
        REFERENCE       ""
  ::=  {  emsTraps  172  }

threadWatchdogCntrCloseToExpiry    NOTIFICATION-TYPE
        OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
                alarmComponentID,
                alarmComponentType,
                alarmDetails,
                alarmTime,
                alarmSetCleared
                }

        STATUS	obsolete
	DESCRIPTION	"Thread watchdog counter close to expiry for a thread.
			There has been a Software Error.
			Threshold=100, Throttle=0, ReportIndex:102,
			Category: maintenance, Level:critical;
			The details contain syntax in the form:
			Process Name = value; Thread Type = value;
			Thread Instance = value."
        REFERENCE       ""
  ::=  {  emsTraps  173  }

systemSoftwareError    NOTIFICATION-TYPE
        OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
                alarmComponentID,
                alarmComponentType,
                alarmDetails,
                alarmTime,
                alarmSetCleared
                }

        STATUS	obsolete
	DESCRIPTION	"System contains Software Error.
			Logic path is not handled by algorithm in code.
			Threshold=100, Throttle=0, ReportIndex:12,
			Category: system, Level:major;
			The details contain syntax in the form:
			Context Description = value; FileName = value;
			Line Number of code = value; Error specific Information = value."
        REFERENCE       ""
  ::=  {  emsTraps  174  }


socketFailureOld    NOTIFICATION-TYPE
        OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
                alarmComponentID,
                alarmComponentType,
                alarmDetails,
                alarmTime,
                alarmSetCleared
                }

        STATUS	obsolete
	DESCRIPTION	"Socket Failure.
			Issued when there is a failure in creating the UDP 
			port used by the MGCP stacks.
			(or)
			Some other application may already be active on the 
			same UDP port and IP address to which the Call Agent 
			MGCP stack is assigned.
			Threshold=100, Throttle=0, ReportIndex:7,
			Category: signaling, Level:major;
			The details contain syntax in the form:
			Reason = value; Hostname = value."  
        REFERENCE       ""
  ::=  {  callAgentTraps  1  }

failureInRecvingSIPMesg    NOTIFICATION-TYPE
        OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
                alarmComponentID,
                alarmComponentType,
                alarmDetails,
                alarmTime,
                alarmSetCleared
                }

        STATUS	obsolete
	DESCRIPTION	"Failed to recv the sip messages.
			Issued when SIP messages cannot be received. This 
			could be due to port conflict (two processes attempting 
			to use the same UDP port).
			Threshold=100, Throttle=0, ReportIndex:8,
			Category: signaling, Level:major;
			The details contain syntax in the form:
			Reason = value; Hostname = value."  
        REFERENCE       ""
  ::=  {  callAgentTraps  2  }

failedToSendCompleteSIPMesg    NOTIFICATION-TYPE
        OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
                alarmComponentID,
                alarmComponentType,
                alarmDetails,
                alarmTime,
                alarmSetCleared
                }

        STATUS	obsolete
	DESCRIPTION	"Failed to send the sip messages.
			Notifies the user that the SIP stack failed to send an 
			SIP message due to it exceeding the maximum length of 
			a UDP packet.
			Threshold=100, Throttle=0, ReportIndex:10,
			Category: signaling, Level:minor;
			The details contain syntax in the form:
			DestinationAddr = value."  
        REFERENCE       ""
  ::=  {  callAgentTraps  3  }

failedToAllocateSIPCtrlBlock    NOTIFICATION-TYPE
        OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
                alarmComponentID,
                alarmComponentType,
                alarmDetails,
                alarmTime,
                alarmSetCleared
                }

        STATUS	obsolete
	DESCRIPTION	" Failed to allocate the sip ctrl block.
			Issued when there is not enough memory to allocate a 
			SIP Call Control Block.
			Threshold=100, Throttle=0, ReportIndex:11,
			Category: signaling, Level:major;
			The details contain syntax in the form:
			Size = value; Detail = value."  
        REFERENCE       ""
  ::=  {  callAgentTraps  4  }

featureServerNotResponding    NOTIFICATION-TYPE
        OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
                alarmComponentID,
                alarmComponentType,
                alarmDetails,
                alarmTime,
                alarmSetCleared
                }

        STATUS	obsolete
	DESCRIPTION	"FS not up or not responding.
			Feature server platform is down or is not operating 
			properly.
			Threshold=30, Throttle=0, ReportIndex:12,
			Category: signaling, Level:critical;
			The details contain syntax in the form:
			FSDomainName = value; Feature Server ID = value."
        REFERENCE       ""
  ::=  {  callAgentTraps  5  }

ss7LinkDown    NOTIFICATION-TYPE
        OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
                alarmComponentID,
                alarmComponentType,
                alarmDetails,
                alarmTime,
                alarmSetCleared
                }

        STATUS	obsolete
	DESCRIPTION	"SS7 Link Down.
			SS7 trunk group may be out-of-service (OOS).
			(or)
			The local Ulticom stack may be down.
			(or)
			SS7 link may be disconnected or faulty.
			(or)
			Remote SS7 signaling site may be down or incorrectly 
			configured.
			Threshold=100, Throttle=0, ReportIndex:13,
			Category: signaling, Level:major;
			The details contain syntax in the form:
			LinkNumber = value; LinkName = value."  
        REFERENCE       ""
  ::=  {  callAgentTraps  6  }

linkRemotelyInhibited    NOTIFICATION-TYPE
        OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
                alarmComponentID,
                alarmComponentType,
                alarmDetails,
                alarmTime,
                alarmSetCleared
                }

        STATUS	obsolete
	DESCRIPTION	"Link is remotely inhibited.
			Issued when the specified SS7 link is inhibited at 
			the remote end.
			Threshold=100, Throttle=0, ReportIndex:14,
			Category: signaling, Level:minor;
			The details contain syntax in the form:
			LinkNumber = value; LinkName = value."  
        REFERENCE       ""
  ::=  {  callAgentTraps  7  }

linkLocallyInhibited    NOTIFICATION-TYPE
        OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
                alarmComponentID,
                alarmComponentType,
                alarmDetails,
                alarmTime,
                alarmSetCleared
                }

        STATUS	obsolete
	DESCRIPTION	"Link is locally inhibited.
			Issued when the specified SS7 link is inhibited at the 
			local end.
			Threshold=100, Throttle=0, ReportIndex:15,
			Category: signaling, Level:minor;
			The details contain syntax in the form:
			LinkNumber = value; LinkName = value."  
        REFERENCE       ""
  ::=  {  callAgentTraps  8  }

linkCongested    NOTIFICATION-TYPE
        OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
                alarmComponentID,
                alarmComponentType,
                alarmDetails,
                alarmTime,
                alarmSetCleared
                }

        STATUS	obsolete
	DESCRIPTION	"Link is congested.
			Issued when the specified SS7 link is experiencing 
			congestion.
			Threshold=100, Throttle=0, ReportIndex:16,
			Category: signaling, Level:minor;
			The details contain syntax in the form:
			LinkNumber = value."  
        REFERENCE       ""
  ::=  {  callAgentTraps  9  }

linkLocalProcOutage    NOTIFICATION-TYPE
        OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
                alarmComponentID,
                alarmComponentType,
                alarmDetails,
                alarmTime,
                alarmSetCleared
                }

        STATUS	obsolete
	DESCRIPTION	"Local processor outage in link.
			Issued when the specified SS7 link has experienced a 
			processor outage.
			Threshold=100, Throttle=0, ReportIndex:17,
			Category: signaling, Level:minor;
			The details contain syntax in the form:
			LinkNumber = value; LinkName = value."  
        REFERENCE       ""
  ::=  {  callAgentTraps  10  }

linkRemoteProcOutage    NOTIFICATION-TYPE
        OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
                alarmComponentID,
                alarmComponentType,
                alarmDetails,
                alarmTime,
                alarmSetCleared
                }

        STATUS	obsolete
	DESCRIPTION	"Remote processor outage in link.
			Issued when the specified SS7 link has experienced a 
			processor outage.
			Threshold=100, Throttle=0, ReportIndex:18,
			Category: signaling, Level:minor;
			The details contain syntax in the form:
			LinkNumber = value; LinkName = value."  
        REFERENCE       ""
  ::=  {  callAgentTraps  11  }

linkSetInaccessibleOld    NOTIFICATION-TYPE
        OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
                alarmComponentID,
                alarmComponentType,
                alarmDetails,
                alarmTime,
                alarmSetCleared
                }

        STATUS	obsolete
        DESCRIPTION     "Linkset inaccessible.
			Issued when the specified SS7 link set is inaccessible.
                        Threshold=100, Throttle=0, ReportIndex:19,
                        Category: signaling, Level:minor;
                        The details contain syntax in the form:
                        LinkSetNumber = value; LinkSetName = value." 
        REFERENCE       ""
  ::=  {  callAgentTraps  12  }

linkSetCongestionOld    NOTIFICATION-TYPE
        OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
                alarmComponentID,
                alarmComponentType,
                alarmDetails,
                alarmTime,
                alarmSetCleared
                }

        STATUS	obsolete
        DESCRIPTION     "Linkset congestion.
			Issued when the specified SS7 link set is experiencing 
			congestion.
                        Threshold=100, Throttle=0, ReportIndex:20,
                        Category: signaling, Level:minor;
                        The details contain syntax in the form:
                        LinkSetNumber = value; LinkSetName = value;
			CongestionLevel = value." 
        REFERENCE       ""
  ::=  {  callAgentTraps  13  }

routeSetFailureOld    NOTIFICATION-TYPE
        OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
                alarmComponentID,
                alarmComponentType,
                alarmDetails,
                alarmTime,
                alarmSetCleared
                }

        STATUS	obsolete
        DESCRIPTION     "Routeset failure.
			Issued when the specified route set has experienced a 
			failure.
                        Threshold=100, Throttle=0, ReportIndex:21,
                        Category: signaling, Level:major;
                        The details contain syntax in the form:
                        RouteSetNumber = value; RouteSetName = value."
        REFERENCE       ""
  ::=  {  callAgentTraps  14  }

routeSetCongestedOld    NOTIFICATION-TYPE
        OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
                alarmComponentID,
                alarmComponentType,
                alarmDetails,
                alarmTime,
                alarmSetCleared
                }

        STATUS	obsolete
        DESCRIPTION     "Routeset Congested.
			Issued when the specified route set is experiencing 
			congestion.
                        Threshold=100, Throttle=0, ReportIndex:22,
                        Category: signaling, Level:minor;
                        The details contain syntax in the form:
                        RouteSetNumber = value; RouteSetName = value;
			CongestionLevel = value."
        REFERENCE       ""
  ::=  {  callAgentTraps  15  }


dpcNotAvailable    NOTIFICATION-TYPE
        OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
                alarmComponentID,
                alarmComponentType,
                alarmDetails,
                alarmTime,
                alarmSetCleared
                }

        STATUS	obsolete
        DESCRIPTION     "DPC Not available.
			Issued when the specified DPC is not available. This 
			is usually caused by one of the following conditions:
			A failure in the affected DPC.
			An unavailable route between Cisco BTS 10200 
			Softswitch and the affected DPC.
                        Threshold=100, Throttle=0, ReportIndex:23,
                        Category: signaling, Level:major;
                        The details contain syntax in the form:
                        DPC = value."
        REFERENCE       ""
  ::=  {  callAgentTraps  16  }

dpcCongestedOld    NOTIFICATION-TYPE
        OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
                alarmComponentID,
                alarmComponentType,
                alarmDetails,
                alarmTime,
                alarmSetCleared
                }

        STATUS	obsolete
        DESCRIPTION     "DPC Congested.
			Issued when the specified destination point code is 
			congested.
                        Threshold=100, Throttle=0, ReportIndex:24,
                        Category: signaling, Level:minor;
                        The details contain syntax in the form:
                        DPC = value; DPCType=value; 
			Congestionlevel = value."
        REFERENCE       ""
  ::=  {  callAgentTraps  17  }


autoStateChangeISDNTG    NOTIFICATION-TYPE
        OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
                alarmComponentID,
                alarmComponentType,
                alarmDetails,
                alarmTime,
                alarmSetCleared
                }

        STATUS	obsolete
        DESCRIPTION     "AutoState change.  
			Issued when the specified ISDN trunk group's status 
			was changed due to a media gateway operation.
			Threshhold: 100, Throttle: 0;
			Report Index: 59, Category: signaling, Level: major; 
			The details contains syntax in the form of:
			TrunkGrpName=value; TrunkGrpIndex=value;
			MediaGwName=value; MediaGwIndex=value;
			ServiceStatus=value."
        REFERENCE       ""
  ::=  {  callAgentTraps  36  }


mediaGwTerminationFaulty    NOTIFICATION-TYPE
        OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
                alarmComponentID,
                alarmComponentType,
                alarmDetails,
                alarmTime,
                alarmSetCleared
                }

        STATUS	obsolete
        DESCRIPTION     "MG termination faulty.  
			Issued when a media gateway or termination has gone 
			faulty due to the detection of an unknown endpoint, 
			unknown package type, and unknown event, a hardware 
			failure, or a general call agent error.
			Threshhold: 100, Throttle: 0;
                        Report Index: 63, Category: signaling, Level: major;
                        The details contains syntax in the form of:
                        FullyQualifiedName=value; GatewayType=value;
                        ReasonForFailure=value."
        REFERENCE       ""
  ::=  {  callAgentTraps  38  }


mgaRunningOutOfSharedMemoryPoolsOld    NOTIFICATION-TYPE
        OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
                alarmComponentID,
                alarmComponentType,
                alarmDetails,
                alarmTime,
                alarmSetCleared
                }

        STATUS	obsolete
        DESCRIPTION     "MGA running out of shm pools.
			Issued when the MGCP signaling adapter was unable to 
			allocate data store for an IPC message due to a lack 
			of resources.
		        Threshhold: 100, Throttle: 0;
                        Report Index: 64, Category: signaling, Level: critical"
        REFERENCE       ""
  ::=  {  callAgentTraps  39  }


mgaRunningOutOfHeapMemoryOld    NOTIFICATION-TYPE
        OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
                alarmComponentID,
                alarmComponentType,
                alarmDetails,
                alarmTime,
                alarmSetCleared
                }

        STATUS	obsolete
        DESCRIPTION     "MGA running out of heap memory.
			Issued when the MGCP signaling adapter was unable to 
			allocate data store for an IPC message from the heap 
			due to a lack of resources.
                        Threshhold: 100, Throttle: 0;
                        Report Index: 65, Category: signaling, Level: critical"
        REFERENCE       ""
  ::=  {  callAgentTraps  40  }

caInternalError    NOTIFICATION-TYPE
        OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
                alarmComponentID,
                alarmComponentType,
                alarmDetails,
                alarmTime,
                alarmSetCleared
                }

        STATUS	obsolete
        DESCRIPTION     "CA Internal error.
			Issued when a call agent internal error has occurred 
			causing the restart of the MGCP signaling adapter.
                        Threshhold: 100, Throttle: 0;
                        Report Index: 66, Category: signaling, Level: major;
                        The details contains syntax in the form of:
                        FullyQualifiedDomainName=value;
                        reason = value;
                        detailedreason = value."

        REFERENCE       ""
  ::=  {  callAgentTraps  41  }



gatewayReturningTransientError    NOTIFICATION-TYPE
        OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
                alarmComponentID,
                alarmComponentType,
                alarmDetails,
                alarmTime,
                alarmSetCleared
                }

        STATUS  obsolete
        DESCRIPTION     "Gateway / termination returning transient error.
			Issued when a transient error is being returned from 
			the specified media gateway.
                        Threshhold: 100, Throttle: 0;
        	        Report Index: 67, Category: signaling, Level: major;
			The details contains syntax in the form of:
			FullyQualifiedDomainName=value;
			TransientErrorString = value."
			
        REFERENCE       ""
  ::=  {  callAgentTraps  42  }



mgDown    NOTIFICATION-TYPE
        OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
                alarmComponentID,
                alarmComponentType,
                alarmDetails,
                alarmTime,
                alarmSetCleared
                }

        STATUS	obsolete
        DESCRIPTION     "Gateway / termination down.
			Issued when the specified media gateway notifies the 
			CA it is going out-of-service. This could be due to 
			the gateway sending RSIP message or due to being 
			powered down, the MGCP application going faulty, or a 
			hardware failure.
                        Threshhold: 100, Throttle: 0;
                        Report Index: 68, Category: signaling, Level: major;
                        The details contains syntax in the form of:
                        FullyQualifiedDomainName=value; MG Type = value;
			Failure Cause = value; Subscriber Info = value;
			ICMP ping status = value."

        REFERENCE       ""
  ::=  {  callAgentTraps  43  }


caAndFSCommunicationMessageTimeout    NOTIFICATION-TYPE
        OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
                alarmComponentID,
                alarmComponentType,
                alarmDetails,
                alarmTime,
                alarmSetCleared
                }

        STATUS	obsolete
        DESCRIPTION     "CA and FS communication message timeout.
			CA-FS communication failure due to wrong system configuration; -OR- CA or FS is down.
                        Threshhold: 100, Throttle: 0;
                        Report Index: 69, Category: signaling, Level: critical;
                        The details contains syntax in the form of:
                        ConfiguredCAName = value."

        REFERENCE       ""
  ::=  {  callAgentTraps  44  }

signalingSS7StackNotReady NOTIFICATION-TYPE
	OBJECTS	{ 
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	obsolete
	DESCRIPTION	"SS7 Stack not ready.  
			SS7 stack not configured properly.
			(or)
			SS7 stack not ready.
			Threshhold: 100, Throttle: 0; Report Index: 75, 
			Category: signaling, Level: critical; 
			The details contains syntax in the form of:
			LogicalName=value"
	REFERENCE	""
  ::=  {  callAgentTraps  45  }

timeoutOnIPAddressOld NOTIFICATION-TYPE
	OBJECTS {
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	obsolete
	DESCRIPTION	"Timeout on IP Address.  
			Issued when BTS 10200 Softswitch is unable to 
			communicate with a gateway.
			Threshold: 100, Throttle: 0; Report Index: 9, 
			Category: signaling, Level: major; 
			The details contains syntax in the form of:
			MGWTermName=value; GatewayType=value; 
			PossibleCause=value."
	REFERENCE	""
  ::=  {  callAgentTraps  46  }

isdnSingleDChanDownNFAS NOTIFICATION-TYPE
	OBJECTS	{ 
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	obsolete
	DESCRIPTION	"ISDN single D-channel down for NFAS.
			One of the ISDN d-channels in PRI is down.
			Threshold=100, Throttle=0, ReportIndex:78,
			Category: signaling, Level:minor;
			The details contain syntax in the form:
			Trunk Group Id = value; Trunk Group Idx = value; 
			Is_Primary_D_Channel = value."
        REFERENCE       ""
  ::=  {  callAgentTraps  47  }

genMGCPSignalingErrMGWandCA NOTIFICATION-TYPE
	OBJECTS	{ 
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	obsolete
	DESCRIPTION	"General MGCP Signaling Error between MGW and CA.
			MGCP signaling interop error.
			Threshold=100, Throttle=0, ReportIndex:79,
			Category: signaling, Level:major;
			The details contain syntax in the form:
			Entity Name = value; General Context = value; 
			Specific Context = value."
        REFERENCE       ""
  ::=  {  callAgentTraps  48  }

outOfBoundsMemSockErr NOTIFICATION-TYPE
	OBJECTS	{ 
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	obsolete
	DESCRIPTION	"Out of Bounds, Memory/Socket Error.
			Out of heap memory.
			(or)
			Out of IPC pool memory.
			(or)
			Socket error; inappropriate/already bound socket in use.
			Threshold=100, Throttle=0, ReportIndex:80,
			Category: signaling, Level:critical;
			The details contain syntax in the form:
			Process Name = value; Description = value."
        REFERENCE       ""
  ::=  {  callAgentTraps  49  }

insufficientHeapMem NOTIFICATION-TYPE
	OBJECTS	{ 
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	obsolete
	DESCRIPTION	"Insufficient heap memory.
			Issued when H323 signaling adaptor was unable to 
			allocated memory from the system.
			Threshold=100, Throttle=0, ReportIndex:81,
			Category: signaling, Level:critical;
			The details contain syntax in the form:
			gateway_id = value."
        REFERENCE       ""
  ::=  {  callAgentTraps  50  }

insufficientSharedMem NOTIFICATION-TYPE
	OBJECTS	{ 
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	obsolete
	DESCRIPTION	"Insufficient shared memory pools.
			Issued when H323 signaling adapter was unable to 
			allocate storage.
			Threshold=100, Throttle=0, ReportIndex:82,
			Category: signaling, Level:critical;
			The details contain syntax in the form:
			gateway_id = value."
        REFERENCE       ""
  ::=  {  callAgentTraps  51  }

errWhileBindingSock NOTIFICATION-TYPE
	OBJECTS	{ 
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	obsolete
	DESCRIPTION	"Error while binding to socket.
			Threshold=100, Throttle=0, ReportIndex:83,
			Category: signaling, Level:critical;
			The details contain syntax in the form:
			gateway_id = value; socket_id = value; 
			local_tsap_address = value; reason_str = value."
        REFERENCE       ""
  ::=  {  callAgentTraps  52  }

reachedMaxSockLimit NOTIFICATION-TYPE
	OBJECTS	{ 
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	obsolete
	DESCRIPTION	"Reached maximum socket limit.
			The configuration setting of an h3a parameter in platform.cfg is wrong.
			Threshold=100, Throttle=0, ReportIndex:84,
			Category: signaling, Level:critical;
			The details contain syntax in the form:
			gateway_id = value; active_sockets = value."
        REFERENCE       ""
  ::=  {  callAgentTraps  53  }

initializationFailureOld NOTIFICATION-TYPE
	OBJECTS	{ 
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	obsolete
	DESCRIPTION	"Initialization Failure.
			Process initialization failure has occurred.
			Threshold=100, Throttle=0, ReportIndex:85,
			Category: signaling, Level:critical;
			The details contain syntax in the form:
			gateway_id = value; reason_str = value."
        REFERENCE       ""
  ::=  {  callAgentTraps  54  }

remoteH323GWNotReachable NOTIFICATION-TYPE
	OBJECTS	{ 
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	obsolete
	DESCRIPTION	"Remote H323 gateway is not reachable.
			Loss of communication with a remote gateway.
			Threshold=100, Throttle=0, ReportIndex:86,
			Category: signaling, Level:major;
			The details contain syntax in the form:
			gateway_id = value; remote_gw_tsap_addr = value."
        REFERENCE       ""
  ::=  {  callAgentTraps  55  }

h323MsgParsingErr NOTIFICATION-TYPE
	OBJECTS	{ 
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	obsolete
	DESCRIPTION	"H323 Message parsing error.
			Unable to successfully parse an incoming H323 message.
			Threshold=100, Throttle=0, ReportIndex:87,
			Category: signaling, Level:major;
			The details contain syntax in the form:
			gateway_id = value; remote_gw_tsap_addr = value."
        REFERENCE       ""
  ::=  {  callAgentTraps  56  }

h323MsgEncodingErr NOTIFICATION-TYPE
	OBJECTS	{ 
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	obsolete
	DESCRIPTION	"H323 Message Encoding error.
			Unable to encode an H323 message for sending.
			Threshold=100, Throttle=0, ReportIndex:88,
			Category: signaling, Level:major;
			The details contain syntax in the form:
			gateway_id = value; reason_str = value."
        REFERENCE       ""
  ::=  {  callAgentTraps  57  }

gatekeeperNotAvail NOTIFICATION-TYPE
	OBJECTS	{ 
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	obsolete
	DESCRIPTION	"Gatekeeper not available/reachable.
			Threshold=100, Throttle=0, ReportIndex:89,
			Category: signaling, Level:major;
			The details contain syntax in the form:
			gateway_id = value; gatekeeper_id = value; 
			gk_tsap_addr = value."
        REFERENCE       ""
  ::=  {  callAgentTraps  58  }

alternateGatekeeperNotResponding NOTIFICATION-TYPE
	OBJECTS	{ 
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	obsolete
	DESCRIPTION	"Alternate Gatekeeper is not responding.
			Threshold=100, Throttle=0, ReportIndex:90,
			Category: signaling, Level:major;
			The details contain syntax in the form:
			gateway_id = value; gatekeeper_id = value; 
			gk_tsap_addr = value."
        REFERENCE       ""
  ::=  {  callAgentTraps  59  }

endpointSecurityViolationOld NOTIFICATION-TYPE
	OBJECTS	{ 
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	obsolete
	DESCRIPTION	"Endpoint Security Violation.
			An H323 security violation has occurred.
			Threshold=100, Throttle=0, ReportIndex:91,
			Category: signaling, Level:major;
			The details contain syntax in the form:
			gateway_id = value; gatekeeper_id = value; 
			gk_tsap_addr = value."
        REFERENCE       ""
  ::=  {  callAgentTraps  60  }

invalidCallId NOTIFICATION-TYPE
	OBJECTS	{ 
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	obsolete
	DESCRIPTION	"invalid Call Identifier.
			The call id was invalid or changed mid-call.
			Threshold=100, Throttle=0, ReportIndex:92,
			Category: signaling, Level:minor;
			The details contain syntax in the form:
			gateway_id = value; remote_gw_tsap_addr = value; 
			call_id = value."
        REFERENCE       ""
  ::=  {  callAgentTraps  61  }

invalidCallRefValue NOTIFICATION-TYPE
	OBJECTS	{ 
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	obsolete
	DESCRIPTION	"Invalid Call Reference Value.
			The call id was invalid or changed mid-call.
			Threshold=100, Throttle=0, ReportIndex:93,
			Category: signaling, Level:minor;
			The details contain syntax in the form:
			gateway_id = value; remote_gw_tsap_addr = value; 
			call_id = value; call_ref_value = value."
        REFERENCE       ""
  ::=  {  callAgentTraps  62  }

invalidConferenceId NOTIFICATION-TYPE
	OBJECTS	{ 
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	obsolete
	DESCRIPTION	"Invalid conference identifier.
			The call id was invalid or changed mid-call.
			Threshold=100, Throttle=0, ReportIndex:94,
			Category: signaling, Level:minor;
			The details contain syntax in the form:
			gateway_id = value; reason_str = value; 
			remote_gw_port  = value; call_id = value; 
			conference_id = value."
        REFERENCE       ""
  ::=  {  callAgentTraps  63  }

invalidMsgFromNetwork NOTIFICATION-TYPE
	OBJECTS	{ 
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	obsolete
	DESCRIPTION	"Invalid Message from the network.
			Unsupported or invalid message type received from network.
			Threshold=100, Throttle=0, ReportIndex:95,
			Category: signaling, Level:minor;
			The details contain syntax in the form:
			gateway_id = value; remote_gw_tsap_addr = value; 
			call_id = value; conf_id = value;
			call_ref_value = value."
        REFERENCE       ""
  ::=  {  callAgentTraps  64  }

internalCallProcErr NOTIFICATION-TYPE
	OBJECTS	{ 
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	obsolete
	DESCRIPTION	"Internal call processing error.
			A software error has occurred.
			Threshold=100, Throttle=0, ReportIndex:96,
			Category: signaling, Level:minor;
			The details contain syntax in the form:
			gateway_id = value; call_id = value; 
			reason_str = value."
        REFERENCE       ""
  ::=  {  callAgentTraps  65  }

insufficientInfoToCompleteCall NOTIFICATION-TYPE
	OBJECTS	{ 
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	obsolete
	DESCRIPTION	"Insufficient Information to complete call.
			Not enough initial call setup information was received to establish 
			the call.
			Threshold=100, Throttle=0, ReportIndex:97,
			Category: signaling, Level:minor;
			The details contain syntax in the form:
			gateway_id = value; call_id = value; 
			conf_id = value; call_ref_value = value."
        REFERENCE       ""
  ::=  {  callAgentTraps  66  }

h323ProtocolInconsistenciesOld NOTIFICATION-TYPE
	OBJECTS	{ 
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	obsolete
	DESCRIPTION	"H323 Protocol inconsistensies.
			The H323 endpoint and BTS are running different protocol versions.
			Threshold=100, Throttle=0, ReportIndex:98,
			Category: signaling, Level:minor;
			The details contain syntax in the form:
			gateway_id = value; call_id = value; 
			reason_str = value."
        REFERENCE       ""
  ::=  {  callAgentTraps  67  }

abnormalCallClearingOld NOTIFICATION-TYPE
	OBJECTS	{ 
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	obsolete
	DESCRIPTION	"Abnormal call clearing.
			Unsupported or invalid message type received from network.
			Threshold=100, Throttle=0, ReportIndex:99,
			Category: signaling, Level:minor;
			The details contain syntax in the form:
			gateway_id = value; call_id = value; 
			reason_str = value."
        REFERENCE       ""
  ::=  {  callAgentTraps  68  }

codecNegotiationFailedOld NOTIFICATION-TYPE
	OBJECTS	{ 
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	obsolete
	DESCRIPTION	"Codec negotiation failed.
			Threshold=100, Throttle=0, ReportIndex:100,
			Category: signaling, Level:minor;
			The details contain syntax in the form:
			gateway_id = value; call_id = value; 
			reason_str = value."
        REFERENCE       ""
  ::=  {  callAgentTraps  69  }

perCallSecurityViolationOld NOTIFICATION-TYPE
	OBJECTS	{ 
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	obsolete
	DESCRIPTION	"Per call security violation.
			This is a future trap definition - it will not be issued in the 3.x 
			release series.
			Threshold=100, Throttle=0, ReportIndex:101,
			Category: signaling, Level:minor;
			The details contain syntax in the form:
			gateway_id = value; call_id = value; 
			gatekeeper_id = value."
        REFERENCE       ""
  ::=  {  callAgentTraps  70  }

h323NetworkCongestedOld NOTIFICATION-TYPE
	OBJECTS	{ 
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	obsolete
	DESCRIPTION	"H323 network congested.
			The H323 application processes has depleted it's resources - no 
			more calls can be completed.
			Threshold=100, Throttle=0, ReportIndex:102,
			Category: signaling, Level:minor;
			The details contain syntax in the form:
			gateway_id = value; gatekeeper_id = value."
        REFERENCE       ""
  ::=  {  callAgentTraps  71  }

featureSvrOneLinkDown NOTIFICATION-TYPE
	OBJECTS	{ 
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	obsolete
	DESCRIPTION	"Feature Server one link down.
			Broken hardware.
			Threshold=100, Throttle=0, ReportIndex:11,
			Category: call processing, Level:minor;
			The details contain syntax in the form:
			Interface Name = value; Interface IP Address = value."
        REFERENCE       ""
  ::=  {  callAgentTraps  72  }

featureSvrBothLinksDown NOTIFICATION-TYPE
	OBJECTS	{ 
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	obsolete
	DESCRIPTION	"Feature Server both links down.
			Broken hardware.
			Threshold=100, Throttle=0, ReportIndex:12,
			Category: call processing, Level:critical;
			The details contain syntax in the form:
			Interface Name = value; Interface IP Address = value;
			Interface Name = value; Interface IP Address = value."
        REFERENCE       ""
  ::=  {  callAgentTraps  73  }

sigAggrConnectionDown NOTIFICATION-TYPE
	OBJECTS	{ 
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	obsolete
	DESCRIPTION	"SIGNALING_AGGR_CONNECTION_DOWN.
			TCP connection down.
			Threshold=100, Throttle=0, ReportIndex:103,
			Category: signaling, Level:major;
			The details contain syntax in the form:
			AGGR ID = value."
        REFERENCE       ""
  ::=  {  callAgentTraps  74  }

sigEsaBtsDfConnectionDown NOTIFICATION-TYPE
	OBJECTS	{ 
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	obsolete
	DESCRIPTION	"SIGNALLING_ESA_BTS_DF_CONNECTION_DOWN.
			DF server not responding.
			Threshold=100, Throttle=0, ReportIndex:106,
			Category: signaling, Level:minor;
			There are no details associated."
        REFERENCE       ""
  ::=  {  callAgentTraps  75  }

siaIncorrectLogicalIPMapped NOTIFICATION-TYPE
	OBJECTS	{ 
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	obsolete
	DESCRIPTION	"SIA logical IP addresses not mapped correctly.
			Domain name for host and/or contact is invalid.
			(or)
			Wrong DNS name specified for host and/or contact in 
			the CFG files.
			(or)
			IP address manager not running.
			Threshold=100, Throttle=0, ReportIndex:107,
			Category: signaling, Level:critical;
			The details contain syntax in the form:
			SIA Host Domain Name = value; SIA Contact Domain Name = value;
			Number of Logical IP = value; Number of mapped log = value."
        REFERENCE       ""
  ::=  {  callAgentTraps  76  }

siaConfigValidOnlySimplex NOTIFICATION-TYPE
	OBJECTS	{ 
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	obsolete
	DESCRIPTION	"Current SIA configuration only valid for simplex 
			systems.
			SIA host and contact parameters are the same in 
			platform.cfg file.
			(or)
			SIA is configured for use on a simplex system.
			Threshold=100, Throttle=0, ReportIndex:108,
			Category: signaling, Level:major;
			The details contain syntax in the form:
			SIA Host Domain Name = value; SIA Contact Domain Name = value."
        REFERENCE       ""
  ::=  {  callAgentTraps  77  }

sctpAssocFailure NOTIFICATION-TYPE
	OBJECTS	{ 
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	obsolete
	DESCRIPTION	"SCTP Association Failure.
			Threshold=100, Throttle=0, ReportIndex:109,
			Category: signaling, Level:major;
			The details contain syntax in the form:
			SCTP Association ID = value."
        REFERENCE       ""
  ::=  {  callAgentTraps  78  }

sctpAssocDegraded NOTIFICATION-TYPE
	OBJECTS	{ 
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	obsolete
	DESCRIPTION	"SCTP Association Degraded (one of two IP connections 
			down).
			Threshold=100, Throttle=0, ReportIndex:111,
			Category: signaling, Level:minor;
			The details contain syntax in the form:
			SG Group ID = value."
        REFERENCE       ""
  ::=  {  callAgentTraps  79  }

sctpAssocConfigError NOTIFICATION-TYPE
	OBJECTS	{ 
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	obsolete
	DESCRIPTION	"SCTP Association Configuration Error.
			Threshold=100, Throttle=0, ReportIndex:112,
			Category: signaling, Level:minor;
			The details contain syntax in the form:
			SCTP Association ID = value; Destination IP Address = value."
        REFERENCE       ""
  ::=  {  callAgentTraps  80  }

signalingGWFailure NOTIFICATION-TYPE
	OBJECTS	{ 
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	obsolete
	DESCRIPTION	"Signaling Gateway Failure.
			Threshold=100, Throttle=0, ReportIndex:113,
			Category: signaling, Level:major;
			The details contain syntax in the form:
			Signaling Gateway ID = value."
        REFERENCE       ""
  ::=  {  callAgentTraps  81  }

signalingGWOOS NOTIFICATION-TYPE
	OBJECTS	{ 
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	obsolete
	DESCRIPTION	"Signaling Gateway Process is out-of-service.
			Threshold=100, Throttle=0, ReportIndex:114,
			Category: signaling, Level:major;
			The details contain syntax in the form:
			Signaling Gateway Process = value."
        REFERENCE       ""
  ::=  {  callAgentTraps  82  }

dpcUserPartUnavail NOTIFICATION-TYPE
	OBJECTS	{ 
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	obsolete
	DESCRIPTION	"DPC User Part Unavailable.
			Threshold=100, Throttle=0, ReportIndex:116,
			Category: signaling, Level:major;
			The details contain syntax in the form:
			DPC ID = value."
        REFERENCE       ""
  ::=  {  callAgentTraps  83  }

cvtMsgRcvdUeqpCIC NOTIFICATION-TYPE
	OBJECTS	{ 
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	obsolete
	DESCRIPTION	"CVT message received for an unequipped CIC.
			Threshold=100, Throttle=0, ReportIndex:117,
			Category: signaling, Level:minor;
			The details contain syntax in the form:
			cic = value; tgn id = value;
			dpc = value."
        REFERENCE       ""
  ::=  {  callAgentTraps  84  }

cvrRcvdWIthFailure NOTIFICATION-TYPE
	OBJECTS	{ 
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	obsolete
	DESCRIPTION	"CVR received with failed indication.
			Threshold=100, Throttle=0, ReportIndex:118,
			Category: signaling, Level:minor;
			The details contain syntax in the form:
			cic = value; tgn id = value;
			dpc = value; opc = value."
        REFERENCE       ""
  ::=  {  callAgentTraps  85  }

s7AProcessFaulty NOTIFICATION-TYPE
	OBJECTS	{ 
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	obsolete
	DESCRIPTION	"S7A process faulty.
			Threshold=100, Throttle=0, ReportIndex:119,
			Category: signaling, Level:critical;
			The details contain syntax in the form:
			Reason = value."
        REFERENCE       ""
  ::=  {  callAgentTraps  86  }

s7Ms7AFaulty NOTIFICATION-TYPE
	OBJECTS	{ 
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	obsolete
	DESCRIPTION	"S7M/S7A faulty.
			Threshold=100, Throttle=0, ReportIndex:120,
			Category: signaling, Level:critical;
			The details contain syntax in the form:
			Reason = value."
        REFERENCE       ""
  ::=  {  callAgentTraps  87  }

m3uaCannotGoStandbyOld NOTIFICATION-TYPE
	OBJECTS	{ 
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	obsolete
	DESCRIPTION	"M3UA Cannot Go Standby.
			Threshold=100, Throttle=0, ReportIndex:121,
			Category: signaling, Level:major;
			There are no details associated."
        REFERENCE       ""
  ::=  {  callAgentTraps  88  }

m3uaCannotGoActiveOld NOTIFICATION-TYPE
	OBJECTS	{ 
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	obsolete
	DESCRIPTION	"M3UA Cannot Go Active.
			Threshold=100, Throttle=0, ReportIndex:122,
			Category: signaling, Level:major;
			There are no details associated."
        REFERENCE       ""
  ::=  {  callAgentTraps  89  }


trunkLocallyBlockedOld NOTIFICATION-TYPE
	OBJECTS	{ 
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	obsolete
	DESCRIPTION	"Trunk locally blocked.
			Issued when a BLO or CGB message was sent on the 
			specified CIC and TG.
			Threshold=500, Throttle=0, ReportIndex:36,
			Category: signaling, Level:minor;
			The details contain syntax in the form:
			CIC Number = value; TGN-ID = value;
			DPC = value; OPC = value."
        REFERENCE       ""
  ::=  {  callAgentTraps  90  }

trunkRemotelyBlockedOld NOTIFICATION-TYPE
	OBJECTS	{ 
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	obsolete
	DESCRIPTION	"Trunk remotely blocked.
			Issued when a BLO or CGB message was received on the 
			specified CIC and TG.
			Threshold=500, Throttle=0, ReportIndex:40,
			Category: signaling, Level:minor;
			The details contain syntax in the form:
			CIC Number = value; TGN-ID = value;
			DPC = value; OPC = value."
        REFERENCE       ""
  ::=  {  callAgentTraps  91  }


destinationPointCodeUnavail NOTIFICATION-TYPE
	OBJECTS	{ 
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	obsolete
	DESCRIPTION	"Destination Point Code is unavailable.
			Link loss or DPC equipment out of service.
			Threshold=100, Throttle=0, ReportIndex:123,
			Category: signaling, Level:minor,
			The details contain syntax in the form:
			Destination Point Code = value."
        REFERENCE       ""
  ::=  {  callAgentTraps  92  }

remoteSubsystemOOS NOTIFICATION-TYPE
	OBJECTS	{ 
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	obsolete
	DESCRIPTION	"Remote subsystem is out of service.
			Link loss or the remote subsystem out of service.
			Threshold=100, Throttle=0, ReportIndex:124,
			Category: signaling, Level:minor,
			The details contain syntax in the form:
			Destination Point Code = value; 
			Remote Subsystem Num = value."
        REFERENCE       ""
  ::=  {  callAgentTraps  93  }

sccpRountingErr NOTIFICATION-TYPE
	OBJECTS	{ 
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	obsolete
	DESCRIPTION	"SCCP routing error.
			SCCP route invalid or not available.
			Threshold=100, Throttle=0, ReportIndex:125,
			Category: signaling, Level:major,
			The details contain syntax in the form:
			NONE."
        REFERENCE       ""
  ::=  {  callAgentTraps  94  }

sccpBindingFailureOld NOTIFICATION-TYPE
	OBJECTS	{ 
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	obsolete
	DESCRIPTION	"SCCP Binding Failure.
			Trillium stack binding failure.
			Threshold=100, Throttle=0, ReportIndex:126,
			Category: signaling, Level:major,
			The details contain syntax in the form:
			Local Point Code = value; Local Subsystem Numb = value."
        REFERENCE       ""
  ::=  {  callAgentTraps  95  }

tcapBindingFailureOld NOTIFICATION-TYPE
	OBJECTS	{ 
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	obsolete
	DESCRIPTION	"TCAP Binding Failure.
			Trillium stack binding failure.
			Threshold=100, Throttle=0, ReportIndex:127,
			Category: signaling, Level:major,
			The details contain syntax in the form:
			NONE."
        REFERENCE       ""
  ::=  {  callAgentTraps  96  }

inapBindingFailureOld NOTIFICATION-TYPE
	OBJECTS	{ 
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	obsolete
	DESCRIPTION	"INAP Binding Failure.
			Trillium stack binding failure.
			Threshold=100, Throttle=0, ReportIndex:128,
			Category: signaling, Level:major,
			The details contain syntax in the form:
			Local Point Code = value; Local Subsystem Numb = value."
        REFERENCE       ""
  ::=  {  callAgentTraps  97  }

numOpenSIPConnReachingEngrLimit NOTIFICATION-TYPE
	OBJECTS	{ 
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	obsolete
	DESCRIPTION	"Number of open SIP connections is reaching 
			engineered limit.
			System configuration and traffic load have caused 
			the number of open connections to approach the 
			engineered limit. This limit will need to be 
			increased to allow for more connections.
			Threshold=100, Throttle=0, ReportIndex:138,
			Category: signaling, Level:minor,
			The details contain syntax in the form:
			Number of SIP connections open = value; 
			SIP connection alarm threshold = value;
			Open SIP connection limit = value."
        REFERENCE       ""
  ::=  {  callAgentTraps  98  }

releaseCause25ExchangeRoutingErrRcvd NOTIFICATION-TYPE
	OBJECTS	{ 
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	obsolete
	DESCRIPTION	"Release Cause 25 Exchange Routing Error Received.
			Received REL w/cause #25.
			Threshold=100, Throttle=0, ReportIndex:38,
			Category: call processing, Level:minor,
			There are no details associated."
        REFERENCE       ""
  ::=  {  callAgentTraps  99  }

sipTrunkOperationallyOOS NOTIFICATION-TYPE
	OBJECTS	{ 
		alarmSubsystem,
		alarmServerity,
		alarmID,
		alarmComponentID,
		alarmComponentType,
		alarmDetails,
		alarmTime,
		alarmSetCleared
		}

	STATUS	obsolete
	DESCRIPTION	"SIP trunk operationally out of service.
			Issued when BTS10200 is unable to communicate with a 
			remote SIP party (Call-Agent or Proxy) over a SIP or 
			SIP-T trunk.
			(or)
			Remote SIP party is not operational.
			Threshold=100, Throttle=0, ReportIndex:142,
			Category: signaling, Level:critical,
			The details contain syntax in the form:
			Trunk Group ID = value; Trunk TSAP Address = value"
        REFERENCE       ""
  ::=  {  callAgentTraps  100  }

--
-- End of Obsoleted Trap Definitions
--

-- Conformance Information

opticallMIBConformance OBJECT IDENTIFIER ::= { opticall 7 }

opticallMIBGroups OBJECT IDENTIFIER ::= { opticallMIBConformance 1 }

opticallMIBCompliances OBJECT IDENTIFIER ::= { opticallMIBConformance 2 }

-- compliance statements
opticallMIBCompliance MODULE-COMPLIANCE
	STATUS current
	DESCRIPTION
		"The compliance statement for agents that implement the
	Opticall Call Agent MIB."
	MODULE -- this module
	MANDATORY-GROUPS { 
			callAgentStatCtrlGroup, 
			elementManagerStatCtrlGroup,
			fsStatCtrlGroup 
			}

	OBJECT	callAgentOAMPPrimaryState
	MIN-ACCESS	read-only
	DESCRIPTION
		"It is conformant to implement this object as read-only."

	OBJECT	elementManagerOAMPPrimaryState
	MIN-ACCESS	read-only
	DESCRIPTION
		"It is conformant to implement this object as read-only."

	OBJECT	featureServerOAMPPrimaryState
	MIN-ACCESS	read-only
	DESCRIPTION
		"It is conformant to implement this object as read-only."

	GROUP	mgwStatCtrlGroup
	DESCRIPTION
		"This group is optional."

	GROUP	trkGrpStatCtrlGroup
	DESCRIPTION
		"This group is optional."

	GROUP	subTermStatCtrlGroup
	DESCRIPTION
		"This group is optional."

	GROUP	trkTermStatCtrlGroup
	DESCRIPTION
		"This group is optional."

	::=  { opticallMIBCompliances  1 }


-- Units of Conformance


callAgentStatCtrlGroup	OBJECT-GROUP
	OBJECTS {
		callAgentOAMPID,
		callAgentOAMPPrimaryState,
		callAgentOAMPSecondaryState
		}
	STATUS	current
	DESCRIPTION
		"A collection of objects providing information the 
		Call Agent."
	::=  { opticallMIBGroups  1 }

elementManagerStatCtrlGroup	OBJECT-GROUP
	OBJECTS {
		elementManagerOAMPID,
		elementManagerOAMPPrimaryState,
		elementManagerOAMPSecondaryState
		}
	STATUS	current
	DESCRIPTION
		"A collection of objects providing information the 
		Element Manager."
	::=  { opticallMIBGroups  2 }

fsStatCtrlGroup	OBJECT-GROUP
	OBJECTS {
		featureServerOAMPID,
		featureServerOAMPPrimaryState,
		featureServerOAMPSecondaryState
		}
	STATUS	current
	DESCRIPTION
		"A collection of objects providing information the 
		Feature Servers."
	::=  { opticallMIBGroups  3 }

mgwStatCtrlGroup	OBJECT-GROUP
	OBJECTS {
		mediaGatewayOAMPID,
		mediaGatewayOAMPAdminState,
		mediaGatewayOAMPOperState
		}
	STATUS	current
	DESCRIPTION
		"A collection of objects providing information the 
		Media Gateways."
	::=  { opticallMIBGroups  4 }

trkGrpStatCtrlGroup	OBJECT-GROUP
	OBJECTS {
		trunkGroupOAMPID,
		trunkGroupOAMPCallAgentID,
		trunkGroupOAMPAdminState,
		trunkGroupOAMPOperState
		}
	STATUS	current
	DESCRIPTION
		"A collection of objects providing information the 
		Trunk Groups."
	::=  { opticallMIBGroups  5 }

subTermStatCtrlGroup	OBJECT-GROUP
	OBJECTS {
		subscrLineTermOAMPID,
		subscrLineTermOAMPAdminState,
		subscrLineTermOAMPOperState
		}
	STATUS	current
	DESCRIPTION
		"A collection of objects providing information the 
		Subscriber Terminations."
	::=  { opticallMIBGroups  6 }

trkTermStatCtrlGroup	OBJECT-GROUP
	OBJECTS {
		trunkTermOAMPTrunkGrpID,
		trunkTermOAMPCIC,
		trunkTermOAMPAdminState,
		trunkTermOAMPOperState,
		trunkTermOAMPStaticState,
		trunkTermOAMPDynamicState
		}
	STATUS	current
	DESCRIPTION
		"A collection of objects providing information the 
		Trunk Terminations."
	::=  { opticallMIBGroups  7 }


END