Network Device Management Tasks You Can Perform in Cisco UCS Director
You can use Cisco UCS Director to perform management, monitoring, and reporting tasks for network devices within a domain.
Configuration and Administration
You can configure the following network device protocols and components in Cisco UCS Director:
-
Ports and trunks
-
Multiple Spanning Tree (MST), Per VLAN Spanning Tree (PVST), and VLAN Trunking Protocol (VTP)
-
Storage area network (SAN) zones and zonesets
-
Virtual device contexts (VDCs), virtual Fibre Channels (VFCs), and virtual port channel (vPC) domains
-
VLANs and private VLANs
-
Virtual storage area networks (VSANs)
-
Virtual extensible local area networks (VXLANs)
Monitoring and Reporting
You can also use Cisco UCS Director to monitor and report on network devices, including:
-
Service detail requests
-
Configurations
-
Modules
-
Interfaces
-
Port capabilities and profiles
-
Pool policies and usage
-
MAC address table configurations
-
Quality of Service (QoS) policy and class maps
-
Service detail requests
-
SAN zones and zonesets
-
vPC information
-
VSAN, VLAN, and Private VLAN information