Cisco UCS Manager GUI Configuration Guide, Release 1.2(1)
Configuring Communication Services
Downloads: This chapterpdf (PDF - 415.0KB) The complete bookPDF (PDF - 5.44MB) | Feedback

Configuring Communication Services

Configuring Communication Services

This chapter includes the following sections:

Communication Services

You can use the following communication services to interface third-party applications with Cisco UCS:

Communication Service

Description

CIM XML

This service is disabled by default and is only available in read-only mode. The default port is 5988.

This common information model is one of the standards defined by the Distributed Management Task Force.

HTTP

This service is enabled on port 80 by default.

You must enable either HTTP or HTTPS to run Cisco UCS Manager GUI. If you select HTTP, all data is exchanged in clear text mode.

For security purposes, we recommend that you enable HTTPS and disable HTTP.

HTTPS

This service is enabled on port 443 by default.

You must enable either HTTP or HTTPS to run Cisco UCS Manager GUI. If you select HTTPS, all data is exchanged in encrypted mode through a secure server.

For security purposes, we recommend that you enable HTTPS and disable HTTP.

SMASH CLP

This service is enabled for read-only access and supports a limited subset of the protocols, such as the show command. You cannot disable it.

This shell service is one of the standards defined by the Distributed Management Task Force.

SNMP

This service is disabled by default. If enabled, the default port is 161. You must configure the community and at least one SNMP trap.

Only enable this service if your system includes integration with an SNMP server.

SSH

This service is enabled on port 22. You cannot disable it, nor can you change the default port.

This service provides access to the Cisco UCS Manager CLI.

Telnet

This service is disabled by default.

This service provides access to the Cisco UCS Manager CLI.

Configuring CIM-XML

Procedure
Step 1   In the Navigation pane, click the Admin tab.
Step 2   In the Admin tab, expand All > Communication Services.
Step 3   Select the Communication Services tab.
Step 4   In the CIM-XML area, click the enabled radio button.

The CIM-XML area expands to display the available configuration options.

Step 5   (Optional) In the Port field, change the default port that Cisco UCS Manager GUI will use for CIM-XML.

The default port is 5988.

Step 6   Click Save Changes.

Configuring HTTP

Procedure
Step 1   In the Navigation pane, click the Admin tab.
Step 2   In the Admin tab, expand All > Communication Services.
Step 3   Select the Communication Services tab.
Step 4   In the HTTP area, click the enabled radio button.

The HTTP area expands to display the available configuration options.

Step 5   (Optional) In the Port field, change the default port that Cisco UCS Manager GUI will use for HTTP.

The default port is 80.

Step 6   Click Save Changes.

Configuring HTTPS

Creating a Key Ring

Procedure
Step 1   In the Navigation pane, click the Admin tab.
Step 2   On the Admin tab, expand All > Key Management > Root.
Step 3   Right-click Root and choose Create Key Ring.
Step 4   In the Create Key Ring dialog box, do the following:
  1. In the Name field, enter a unique name for the key ring.
  2. In the Modulus field, select one of the following radio buttons:
    • mod512

    • mod1024

    • mod1536

    • mod2048

  3. Click OK.

What to Do Next

Create a certificate request for this key ring.

Creating a Certificate Request for a Key Ring

Procedure
Step 1   In the Navigation pane, click the Admin tab.
Step 2   On the Admin tab, expand All > Key Management > Root.
Step 3   Click the key ring for which you want to create a certificate request.
Step 4   In the Work pane, click the General tab.
Step 5   In the General tab, click Create Certificate Request.
Step 6   In the Create Certificate Request dialog box, complete the following fields:
Name Description

Password field

An optional password for this request.

Confirm Password field

If you specified a password, enter it again for confirmation.

Subject field

The fully qualified domain name of the fabric interconnect.

IP Address field

The IP address of the fabric interconnect.

Step 7   Click OK.
Step 8   Copy the text of the certificate request out of the Request field and save in a file.
Step 9   Send the file with the certificate request to the trust anchor or certificate authority.

What to Do Next

Create a trusted point and set the certificate chain for the certificate of trust received from the trust anchor.

Creating a Trusted Point

Procedure
Step 1   In the Navigation pane, click the Admin tab.
Step 2   On the Admin tab, expand All > Key Management > Root.
Step 3   Right-click Root and choose Create Trusted Point.
Step 4   In the Create Trusted Point dialog box, complete the following fields:
Name Description

Name field

The name of the trusted point.

Certificate Chain field

The certificate information for this trusted point.

Step 5   Click OK.

What to Do Next

When you receive the certificate from the trust anchor or certificate authority, import it into the key ring.

Importing a Certificate into a Key Ring

Procedure
Step 1   In the Navigation pane, click the Admin tab.
Step 2   On the Admin tab, expand All > Key Management > Root.
Step 3   Click the key ring into which you want to import the certificate.
Step 4   In the Work pane, click the General tab.
Step 5   In the Certificate area, complete the following fields:
  1. From the Trusted Point drop-down list, select the trusted point for the trust anchor that granted this certificate.
  2. In the Certificate field, paste the text from the certificate you received from the trust anchor or certificate authority.
Tip   

If the fields in an area are not displayed, click the Expand icon to the right of the heading.

Step 6   Click Save Changes.

What to Do Next

Configure your HTTPS service with the key ring.

Configuring HTTPS

Procedure
Step 1   In the Navigation pane, click the Admin tab.
Step 2   In the Admin tab, expand All > Communication Services.
Step 3   Select the Communication Services tab.
Step 4   In the HTTPS area, click the enabled radio button.

The HTTPS area expands to display the available configuration options.

Step 5   (Optional) In the Port field, change the default port that Cisco UCS Manager GUI will use for HTTPS.

The default port is 443.

Step 6   (Optional) In the Key Ring field, enter the name of the key ring you created for HTTPS.
Caution   

If you update the Key Ring field, all current HTTP and HTTPS sessions will be closed without warning after you click Save Changes.

Step 7   Click Save Changes.
Step 8   Click OK.

Deleting a Key Ring

Procedure
Step 1   In the Navigation pane, click the Admin tab.
Step 2   On the Admin tab, expand All > Key Management > Root.
Step 3   Right-click the key ring you want to delete and select Delete.
Step 4   If Cisco UCS Manager GUI displays a confirmation dialog box, click Yes.

Deleting a Trusted Point

Procedure
Step 1   In the Navigation pane, click the Admin tab.
Step 2   On the Admin tab, expand All > Key Management > Root.
Step 3   Right-click the trusted point you want to delete and select Delete.
Step 4   If Cisco UCS Manager GUI displays a confirmation dialog box, click Yes.
Step 5   Click OK.

Configuring SNMP

Enabling SNMP

Procedure
Step 1   In the Navigation pane, click the Admin tab.
Step 2   In the Admin tab, expand All > Communication Services.
Step 3   Select the Communication Services tab.
Step 4   In the SNMP area, click the enabled radio button.

The SNMP area expands to display the available configuration options. You cannot change the port on which Cisco UCS Manager communicates with the SNMP host.

Step 5   In the Community field, enter the default community name that Cisco UCS Manager GUI should include with any trap messages it sends to the SNMP server.

The default community is public.

Step 6   Click Save Changes.

Configuring Trap Hosts

Procedure
Step 1   In the Navigation pane, click the Admin tab.
Step 2   In the Admin tab, expand All > Communication Services.
Step 3   Select the Communication Services tab.
Step 4   In the SNMP Traps area, click +.
Step 5   In the Create SNMP Trap dialog box, complete the following fields:
Name Description

IP Address field

The IP address of the SNMP host to which the fabric interconnect should send the trap.

Community field

The community name the fabric interconnect includes when it sends the trap to the SNMP host. This must be the same community as you configured for the SNMP service.

Enter an alphanumeric string between 1 and 32 characters.

Port field

The port on which the fabric interconnect communicates with the SNMP host.

The default port is 162.

Step 6   Click OK.
Step 7   Click Save Changes.

Configuring SNMPv3 users

Procedure
Step 1   In the Navigation pane, click the Admin tab.
Step 2   In the Admin tab, expand All > Communication Services.
Step 3   Select the Communication Services tab.
Step 4   In the SNMP Users area, click +.
Step 5   In the Create SNMP User dialog box, complete the following fields:
Name Description

Name field

The username assigned to the SNMP user.

Auth Type field

The authorization type. This can be:


Use AES-128 check box

If checked, this user uses AES-128 encryption.

Password field

The password for this user.

Confirm Password field

The password again for confirmation purposes.

Privacy Password field

The privacy password for this user.

Confirm Privacy Password field

The privacy password again for confirmation purposes.

Step 6   Click OK.
Step 7   Click Save Changes.

Enabling Telnet

Procedure
Step 1   In the Navigation pane, click the Admin tab.
Step 2   In the Admin tab, expand All > Communication Services.
Step 3   Click the Communication Services tab.
Step 4   In the Telnet area, click the enabled radio button.
Step 5   Click Save Changes.

Disabling Communication Services


Note


We recommend that you disable all communication services that are not required to interface with other network applications.


Procedure
Step 1   In the Navigation pane, click the Admin tab.
Step 2   In the Admin tab, expand All > Communication Services.
Step 3   On the Communication Services tab, click the disable radio button for each service that you want to disable.
Step 4   Click Save Changes.