Cisco UCS Manager GUI Configuration Guide, Release 1.2(1)
Configuring VN-Link Related Policies
Downloads: This chapterpdf (PDF - 386.0KB) The complete bookPDF (PDF - 5.44MB) | Feedback

Configuring VN-Link Related Policies

Configuring VN-Link Related Policies

This chapter includes the following sections:

Configuring Dynamic vNIC Connection Policies

Dynamic vNIC Connection Policy

This policy determines how the VN-link connectivity between VMs and dynamic vNICs is configured. This policy is required for Cisco UCS instances that include servers with Cisco M81KR VIC adapters that host VMs and dynamic vNICs.

Each Dynamic vNIC connection policy must include an adapter policy and designate the number of vNICs that can be configured for any server associated with a service profile that includes the policy.

Creating a Dynamic vNIC Connection Policy

Procedure
Step 1   In the Navigation pane, click the LAN tab.
Step 2   On the LAN tab, expand LAN > Policies.
Step 3   Expand the node for the organization where you want to create the policy.

If the system does not include multi-tenancy, expand the root node.

Step 4   Right-click the Dynamic vNIC Connection Policies node and select Create Dynamic vNIC Connection Policy.
Step 5   In the Create Dynamic vNIC Connection Policy dialog box, complete the following fields:
Name Description

Name field

The name of the policy.

This name can be between 1 and 16 alphanumeric characters. You cannot use spaces or any special characters, and you cannot change this name after the object has been saved.

Description field

A description of the policy. We recommend including information about where and when the policy should be used.

Number of Dynamic vNICs field

The number of dynamic vNICs that this policy affects.

Adapter Policy drop-down list

The adapter profile associated with this policy. The profile must already exist to be included in the drop-down list.

Protection field

This field is always set to "protected" because failover mode is always enabled for virtual NICs.

Step 6   Click OK.
Step 7   If Cisco UCS Manager GUI displays a confirmation dialog box, click Yes.

Changing a Dynamic vNIC Connection Policy

Procedure
Step 1   In the Navigation pane, click the LAN tab.
Step 2   On the LAN tab, expand LAN > Policies.
Step 3   Expand the node for the organization that contains the policy you want to change.

If the system does not include multi-tenancy, expand the root node.

Step 4   Expand the Dynamic vNIC Connection Policies node and click the policy that you want to change.
Step 5   In the Work pane, click the General tab.
Step 6   Change one or more of the following fields:
Name Description

Description field

A description of the policy. We recommend including information about where and when the policy should be used.

Number of Dynamic vNICs field

The number of dynamic vNICs that this policy affects.

Adapter Policy drop-down list

The adapter profile associated with this policy. The profile must already exist to be included in the drop-down list.

You cannot change the other properties of the policy, such as the Name field.

Step 7   Click Save Changes.
Step 8   If Cisco UCS Manager GUI displays a confirmation dialog box, click Yes.

Deleting a Dynamic vNIC Connection Policy

Procedure
Step 1   In the Navigation pane, click the LAN tab.
Step 2   On the LAN tab, expand LAN > Policies > Organization_Name.
Step 3   Expand the Dynamic vNIC Connection Policies node.
Step 4   Right-click the policy you want to delete and select Delete.
Step 5   If Cisco UCS Manager GUI displays a confirmation dialog box, click Yes.

Configuring the VM Lifecycle Policy

VM Lifecycle Policy

The VM lifecycle policy determines how long Cisco UCS Manager retains offline VMs and offline dynamic vNICs in its database. If a VM or dynamic vNIC remains offline after that period, Cisco UCS Manager deletes the object from its database.

All virtual machines (VMs) on Cisco UCS servers are managed by vCenter. Cisco UCS Manager cannot determine whether an inactive VM is temporarily shutdown, has been deleted, or is in some other state that renders it inaccessible. Therefore, Cisco UCS Manager considers all inactive VMs to be in an offline state.

Cisco UCS Manager considers a dynamic vNIC to be offline when the associated VM is shutdown, or the link between the fabric interconnect and the I/O module fails. On rare occasions, an internal error can also cause Cisco UCS Manager to consider a dynamic vNIC to be offline.

The default VM and dynamic vNIC retention period is 15 minutes. You can set that for any period of time between 1 minute and 7200 minutes (or 5 days).


Note


The VMs that Cisco UCS Manager displays are for information and monitoring only. You cannot manage VMs through Cisco UCS Manager. Therefore, when you delete a VM from the Cisco UCS Manager database, you do not delete the VM from the server or from vCenter.


Configuring the VM Lifecycle Policy

Procedure
Step 1   In the Navigation pane, click the VM tab.
Step 2   On the VM tab, expand the All node.
Step 3   On the VM tab, click VMWare.
Step 4   In the Work pane, click the General tab.
Step 5   In the Lifecycle Policy area, complete the following fields:
Name Description

VM Retention field

The period of time, in minutes, that Cisco UCS Manager retains an offline VM in its database. If a VM remains offline after that period, Cisco UCS Manager deletes the VM from its database.

The default VM retention period is 15 minutes. You can configure this for any period of time between 1 minute and 7200 minutes (or 5 days).

vNIC Retention field

The period of time, in minutes, that Cisco UCS Manager retains an offline dynamic vNIC in its database. If a dynamic vNIC remains offline after that period, Cisco UCS Manager deletes the dynamic vNIC from its database.

The default vNIC retention period is 15 minutes. You can configure this for any period of time between 1 minute and 7200 minutes (or 5 days).

Step 6   Click Save Changes.