Cisco Host Upgrade Utility 1.5(1) User Guide
Troubleshooting
Downloads: This chapterpdf (PDF - 1.04MB) The complete bookPDF (PDF - 2.19MB) | Feedback

Troubleshooting

Troubleshooting

This chapter contains the following topics:

Troubleshooting

The following table describes troubleshooting suggestions for issues that you might encounter.

Issue

Suggested Solution

Connection to CIMC is lost after an update and reboot and the KVM session ends.

This is expected behavior after a firmware update. Log back in to the CIMC and reestablish your KVM session.

The following error message is observed:

PID, Board Part Number, Product Part Number <PID, Board Part Number, Product Part Number> is not supported by this HUU image. HUU will not boot on this machine. Press any key to reboot the server.

This error message is displayed when the HUU ISO is not supported by the server. Use the HUU ISO that is supported by the server.