Guest

Cisco TelePresence MCU 4200 Series

When voice prompts are used on an MCU

When are voice prompts used on the Cisco TelePresence MCU?

The voice prompts on the Cisco TelePresence MCU are:

Prompt Text Heard when ...
voice_prompt_
conference_already_exists
I'm sorry, there is already a conference with that number User attempts to create ad hoc conference from auto attendant with a numeric ID that already exists
voice_prompt_
conference_over
Your conference is now over. Goodbye 2 seconds before end of conference
voice_prompt_
connect_now
I'll connect you to your conference now Conference is joined from auto attendant
voice_prompt_
enter_conference_id
Please enter the conference code now In an auto attendant from which conferences cannot be created
voice_prompt_
enter_conference_id_
or_create
Please enter the conference number followed by the pound key, or press star to create a new conference Periodically in auto attendant
voice_prompt_
enter_conference_pin
Please enter the security PIN for this conference now
When PIN entry screen is displayed on auto attendant:
(1) If user attempts to join PIN-protected conference from auto attendant
(2) If user dials directly to a PIN-protected conference
voice_prompt_
enter_new_conference_id
Please enter the conference number for the conference you are
creating, followed by the pound key
When user attempts to create a new conference by pressing * or selecting Create new conference option in auto attendant
voice_prompt_
enter_new_conference_pin
Please enter the PIN for the conference you are creating, followed by the pound key; if you don't want a PIN, just press the pound key When user attempts to create a new conference provided 'time to
wait for ad hoc PIN setup' option on MCU is non-zero
(1) Having created a new conference by pressing * or selecting Create new conference in auto attendant
(2) Having dialed an unknown E.164 number when Action for incoming call to unknown E.164 number option on MCU is set to Create new conference
voice_prompt_
enter_pin
Please enter the security PIN followed by the pound key In PIN screen when attempting to use PIN protected auto attendant
voice_prompt_
fecc_usage
To join a conference you may use the far end camera controls on your remote Played in auto attendant immediately after welcome message
voice_prompt_
first_participant
You are the first participant to join the conference First user in a conference joins the conference
voice_prompt_
pin_incorrect
Sorry, I did not recognize that security PIN, please try again When user enters wrong PIN
voice_prompt_
two_minutes
Your conference is scheduled to end in two minutes 2 minutes before end of conference
voice_prompt_
unknown_conference
Sorry, I did not recognize that conference code, please try again When unknown conference ID is entered in auto attendant
voice_prompt_
waiting_for_chairperson
Waiting for conference chairperson If chair/guest IDs are being used and user has entered guest credentials
voice_prompt_welcome
Hello, welcome to the conferencing system When first connected to the auto attendant

This article applies to the following products:

  • Cisco TelePresence MCU 4200 / MSE 8420
  • Cisco TelePresence MCU 4500
  • Cisco TelePresence MSE 8510 blade

April 30th, 2011 TAA_KB_75