You can install the
Cisco
VSG on a Cisco
Cloud Service Platform as a virtual service blade (VSB).
This example shows
how to configure a Cisco Cloud Service Platform appliance VSB as a
Cisco
VSG:
csp# configure
Enter configuration commands, one per line. End with CNTL/Z.
N1010-63(config)# virtual-service-blade vsg-1
N1010-63(config)# description vsg-1 for Tenant1
N1010-63(config-vsb-config)# virtual-service-blade-type new nexus-1000v.5.2.1.VSG2.1.2a.iso
N1010-63(config-vsb-config)# interface data vlan 923
N1010-63(config-vsb-config)# interface ha vlan 930
N1010-63(config-vsb-config)# no shutdown
N1010-63(config-vsb-config)# enable
Enter vsb image: [nexus-1000v.5.2.1.VSG2.1.2a.iso]
Enter HA id[1-4095]: 1002
Management IP version [V4/V6]: [V4]
Enter Management IP address: 10.2.71.117
Enter Management subnet mask: 255.255.255.0
IPv4 address of the default gateway: 10.2.0.1
Enter HostName: VSG-1
Enter the password for 'admin': Hello123
N1010-63(config-vsb-config)#exit
N1010-63)#
This example show
how to install the
Cisco
VSG on a Cisco
Cloud Service Platform as a VSB.
N1010-63# configure
N1010-63(config)# virtual-service-blade vsg-1
N1010-63(config-vsb-config)# show virtual-service-blade-type summary
-------------------------------------------------------------------------------
Virtual-Service-Blade-Type Virtual-Service-Blade
-------------------------------------------------------------------------------
VSG-2.1 VSG-NH-hpv
hyperv-soak
VSG-354
VSG-357
vsg-1
N1010-63(config-vsb-config)# virtual-service-blade-type new nexus-1000v.5.2.1.VSG2.1.2a.iso
or
N1010-63(config-vsb-config)# show virtual-service-blade name vsg-1
N1010-63(config-vsb-config)# description vsg-1 for Tenant1
N1010-63(config-vsb-config)# show virtual-service-blade name vsg-1
-------------------------------------------------------------------------------
virtual-service-blade vsm2
Description:
Slot id: 2
Host Name:
Management IP:
VSB Type Name : VSG-2.1
Interface: ha vlan: 0
Interface: management vlan: 231
Interface: data vlan: 0
Interface: internal vlan: NA
Ramsize: 2048
Disksize: 3
Heartbeat: 0
HA Admin role: Primary
HA Oper role: NONE
Status: VSB NOT PRESENT
Location: PRIMARY
SW version:
HA Admin role: Secondary
HA Oper role: NONE
Status: VSB NOT PRESENT
Location: SECONDARY
SW version:
VSB Info:
-------------------------------------------------------------------------------
N1010-63(config-vsb-config)# interface data vlan 1044
or
N1010-63(config-vsb-config)# interface ha vlan 1045
N1010-63(config-vsb-config)# enable
-------------------------------------------------------------------------------
Enter domain id[1-1024]: 1014
Enter Management IP address: 10.78.108.40
Enter Management subnet mask length 28
IPv4 address of the default gateway: 10.78.108.117
Enter Switchname: VSG-1
Enter the password for 'admin': Hello_123
-------------------------------------------------------------------------------
N1010-63(config-vsb-config)# show virtual-service-blade name vsg-1
Description:
Slot id: 4
Host Name: VSG-Fire-hpv
Management IP: 10.78.108.40
VSB Type Name : VSG-1.2
Configured vCPU: 1
Operational vCPU: 1
Configured Ramsize: 2048
Operational Ramsize: 2048
Disksize: 3
Heartbeat: 521511
Legends: P - Passthrough
--------------------------------------------------------------------------
Interface Type MAC VLAN State Uplink-Int
Pri Sec Oper Adm
--------------------------------------------------------------------------
VsbEthernet4/1 data 0002.3d70.3f0c 1044 up up Po3 Po3
VsbEthernet4/2 management 0002.3d70.3f0b 231 up up Po1 Po1
VsbEthernet4/3 ha 0002.3d70.3f0d 1045 up up Po2 Po2
internal NA NA NA up up
HA Role: Primary
HA Status: ACTIVE
Status: VSB POWERED ON
Location: PRIMARY
SW version: 5.2(1)VSG2(1.2a)
HA Role: Secondary
HA Status: STANDBY
Status: VSB POWERED ON
Location: SECONDARY
SW version: 5.2(1)VSG2(1.2a)
VSB Info:
Domain ID : 1054
-------------------------------------------------------------------------------
N1010-63(config-vsb-config)# copy running-config startup-config
This example shows
how to display a virtual service blade summary on the Cisco Cloud Service
Platform:
N1010-63(config-vsb-config)# show virtual-service-blade summary
-------------------------------------------------------------------------------
Name HA-Role HA-Status Status Location
-------------------------------------------------------------------------------
VSG-NH-hpv PRIMARY ACTIVE VSB POWERED ON PRIMARY
VSG-NH-hpv SECONDARY STANDBY VSB POWERED ON SECONDARY
hyperv-soak PRIMARY NONE VSB NOT PRESENT PRIMARY
hyperv-soak SECONDARY NONE VSB NOT PRESENT SECONDARY
VSG-354 PRIMARY ACTIVE VSB POWERED ON PRIMARY
VSG-354 SECONDARY STANDBY VSB POWERED ON SECONDARY
VSG-1 PRIMARY ACTIVE VSB POWERED ON PRIMARY
VSG-1 SECONDARY STANDBY VSB POWERED ON SECONDARY