The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.
This chapter describes the Cisco NX-OS virtual port channel (vPC) commands that begin with G.
To enable the Graceful Type-1 Consistency feature in a virtual port channel (vPC) domain, use the graceful consistency-check command. To disable the Graceful Type-1 Consistency feature, use the no form of this command.
graceful consistency-check
no graceful consistency-check
This command has no arguments or keywords.
Enabled
vPC domain configuration mode
|
|
---|---|
5.0(2)N2(1) |
This command was introduced. |
This example shows how to enable the Graceful Type-1 Consistency feature in vPC domain 100:
switch# configuration terminal
switch(config)# vpc domain 100
switch(config-vpc-domain)# graceful consistency-check
switch(config-vpc-domain)#
|
|
---|---|
vpc domain |
Configures a vPC domain. |
show vpc brief |
Displays information about vPCs. If the vPC feature is not enabled, the system displays an error when you enter this command. |