Cisco Nexus 1000V Command Reference, Release 4.2(1)SV1(4)
Q Commands
Downloads: This chapterpdf (PDF - 78.0KB) The complete bookPDF (PDF - 4.67MB) | Feedback

Table of Contents

Q Commands

qos statistics

queue-limit

Q Commands

This chapter describes the Cisco Nexus 1000V commands that begin with the letter Q.

qos statistics

To enable the recording of QoS statistics, use the qos statistics command. To disable the recording of QoS statistics, use the no form of this command.

qos statistics

no qos statistics

 
Syntax Description

This command has no arguments or keywords.

 
Defaults

QoS statistics are not recorded.

 
Command Modes

Global configuration (config)

 
Supported User Roles

network-admin

 
Command History

Release
Modification

4.0(4)SV1(1)

This command was introduced.

Examples

This example shows how to enable the recording of QoS statistics:

n1000v# configure terminal
n1000v(config)# qos statistics
n1000v(config)#

 
Related Commands

Command
Description

show policy-map

Displays the policy map configuration for all policy maps or for a specified policy map.

 

queue-limit

To configure the queue size in a number of packets, use the queue-limit command. To set the default, use the no form of this command.

queue-limit { q-size [ packets]}

no queue-limit { q-size [ packets]}

 
Syntax Description

q-size

Queue size in packets.

packets

(Optional) Packets.

 
Defaults

None

 
Command Modes

policy-map type queuing class configuration (config-pmap-c-que)

 
Supported User Roles

network-admin

 
Command History

Release
Modification

4.2(1)SV1(4)

This command was introduced.

 
Usage Guidelines

Examples

This example shows how to configure the queue limit to 5000 packets:

n1000v(config-pmap-c-que)# queue-limit 5000 packets
 

 
Related Commands

Command
Description

bandwidth (policy map)

Configures the minimum guaranteed bandwidth for a specific traffic class in a QoS policy map.

show policy-map type queuing