Cisco Nexus 1010 Command Reference, Release 4.2(1)SP1(3)
R Commands
Downloads: This chapterpdf (PDF - 128.0KB) The complete bookPDF (PDF - 5.19MB) | Feedback

R Commands

Table Of Contents

R Commands

ramsize

reload

reload module

rmdir

role feature-group name

role name

run-script


R Commands


This chapter describes the Cisco Nexus 1010 commands that begin with the letter R.

ramsize

To modify the memory allocated for RAM in the virtual service, use the ramsize command.

ramsize size

Syntax Description

size

Size of the RAM in megabytes. The allowable range is from 1024 to 4096.


Defaults

The default RAM size varies, depending on the virtual service. For example, the default RAM size for the Virtual Supervisor Module (VSM) is 2048 GB.

Command Modes

Virtual service blade configuration (config-vsb-config)

Supported User Roles

network-admin

Command History

Release
Modification

4.0(4)SP1(1)

This command was introduced.


Examples

This example shows how to set the RAM size to 3072 MB:

n1010# config t
n1010(config)# virtual-service-blade name VSM-1
n1010(config-vsb-config)# ramsize 3072
n1010(config-vsb-config)# 

Related Commands

Command
Description

virtual-service-blade

Creates the named virtual service and places you into configuration mode for that service.

numcpu

Configures the NUM CPU.

description

Adds a description to the virtual service.

show virtual-service-blade

Displays information about the virtual service blades.



reload

To reboot the system, use the reload command.

reload

Syntax Description

This command has no arguments or keywords.

Defaults

None

Command Modes

Any

Supported User Roles

network-admin

Command History

Release
Modification

4.0(4)SP1(1)

This command was introduced.


Examples

This example shows how to reboot the system:

n1010# reload

This command will reboot the system. (y/n)? [n] y
2009 Oct 30 21:51:34 s1 %$ VDC-1 %$ %PLATFORM-2-PFM_SYSTEM_RESET: Manual system restart 
from Command Line Interface
n1010(config)#

Related Commands

Command
Description

show version

Displays information about the software version.


reload module

To reload a module in the device, use the reload module command.

reload module slot [force-dnld]

Syntax Description

slot

Chassis slot number.

force-dnld

(Optional) Forces the download of software to the module.


Defaults

None

Command Modes

Any

Supported User Roles

network-admin

Command History

Release
Modification

4.0(4)SP1(1)

This command was introduced.


Examples

This example shows how to reload a module:

n1010# reload module 2

Related Commands

Command
Description

show version

Displays information about the software version.


rmdir

To remove a directory, use the rmdir command.

rmdir [filesystem:[//module/]]directory

Syntax Description

filesystem:

(Optional) Name of a file system. The name is case sensitive.

//module/

(Optional) Identifier for a Virtual Supervisor Module (VSM). Valid values are sup-active, sup-local, sup-remote, or sup-standby. The identifiers are case sensitive.

directory

Name of a directory. The name is case sensitive.


Defaults

Removes the directory from the current working directory.

Command Modes

Any

Supported User Roles

network-admin

Command History

Release
Modification

4.0(4)SP1(1)

This command was introduced.


Examples

This example shows how to remove the my_files directory:

n1010# rmdir my_files

Related Commands

Command
Description

cd

Changes the current working directory.

dir

Displays the directory contents.

pwd

Displays the name of the current working directory.


role feature-group name

To configure a role that will support a specified group of features, use the role feature-group name command. To remove the role, use the no form of this command.

role feature-group name group-name

no role feature-group name group-name

Syntax DescriptionI

group-name

Descriptive name for the role. The name is case sensitive and an alphanumeric string of up to 32 characters.


Defaults

None

Command Modes

Global configuration (config)

Supported User Roles

network-admin

Command History

Release
Modification

4.0(4)SP1(1)

This command was introduced.


Examples

This example shows how to create a role named GroupA to support a specified group of features:

n1010# config t
n1010(config)# role feature-group name GroupA
n1010(config-role-featuregrp)#

This example shows how to remove the role named GroupA:

n1010# config t
n1010(config)# no role feature-group name GroupA
n1010(config-role-featuregrp)#

Related Commands

Command
Description

role name

Creates a user role.

username

Configures information about the user.

show user account

Displays user account configuration.

show users

Displays information about the user session.


role name

To create a user role, use the role name command. To remove the role, use the no form of this command.

role name role-name

no role name role-name

Syntax Description

role-name

User role of this name.


Defaults

None

Command Modes

Global configuration (config)

Supported User Roles

network-admin

Command History

Release
Modification

4.0(4)SP1(1)

This command was introduced.


Examples

This example shows how to create a role named UserA:

n1010 # config t
n1010(config)# role name UserA

This example shows how to remove the UserA role:

n1010(config)# no role UserA

Related Commands

Command
Description

role feature-group name

Configures a role that will support a specified group of features.

username

Configures information about the user.

show user account

Displays user account configuration.

show users

Displays information about the user session.


run-script

To run a command script that is saved in a file, use the run-script command.

run-script {bootflash: | volatile:} filename

Syntax Description

bootflash:

Indicates that the file containing the command script is located in the Bootflash file system.

volatile:

Indicates that the file containing the command script is located in the Volatile file system.

filename

Name of the file containing the command script. The name is case sensitive.


Defaults

None

Command Modes

Any

Supported User Roles

network-admin
network-operator

Command History

Release
Modification

4.0(4)SP1(1)

This command was introduced.


Examples

This example shows how to run a command script that is saved in the Sample file on the Volatile file system:

n1010(config)# run-script volatile:Sample
n1010(config)# 

Related Commands

Command
Description

cd

Changes the current working directory.

copy

Copies files.

dir

Displays the contents of the working directory.

pwd

Displays the name of the present working directory (pwd).