Cisco Nexus 1010 Command Reference, Release 4.2(1)SP1(2)
F Commands
Downloads: This chapterpdf (PDF - 104.0KB) The complete bookPDF (PDF - 4.75MB) | Feedback

Table of Contents

F Commands

find

format

F Commands

This chapter describes the Cisco Nexus 1010 commands that begin with the letter F.

find

To find filenames beginning with a character string, use the find command.

find filename-prefix

 
Syntax Description

filename-prefix

First part or all of a filename. The filename prefix is case sensitive.

 
Defaults

None

 
Command Modes

Any command mode

 
Supported User Roles

network-admin

 
Command History

Release
Modification

4.0(4)SP1(1)

This command was introduced.

 
Usage Guidelines

The find command searches all subdirectories under the current working directory. You can use the cd and pwd commands to navigate to the starting directory.

Examples

This example shows how to display filenames beginning with ospf:

switch# find ospf
/usr/bin/find: ./lost+found: Permission denied
./ospf-gr.cfg
./ospfgrconfig
./ospf-gr.conf
 

 
Related Commands

Command
Description

cd

Changes the current working directory.

pwd

Displays the name of the current working directory.

format

To format an external Flash device to erase the contents and restore it to its factory-shipped state, use the format command.

format filesystem :

 
Syntax Description

filesystem :

Name of the file system. The valid values are bootflash, logflash, slot0 , usb1 , or usb2 .

 
Defaults

None

 
Command Modes

Any command mode

 
Supported User Roles

network-admin

 
Command History

Release
Modification

4.0(4)SP1(1)

This command was introduced.

Examples

This example shows how to format an external Flash device:

switch# format slot0:
 

 
Related Commands

Command
Description

cd

Changes the current working directory.

dir

Displays the directory contents.

pwd

Displays the name of the current working directory.