Cisco Nexus 1010 Command Reference, Release 4.2(1)SP1(2)
X Commands
Downloads: This chapterpdf (PDF - 118.0KB) The complete bookPDF (PDF - 4.75MB) | Feedback

Table of Contents

X Commands

xml server max-session

xml server terminate session

xml server timeout

X Commands

This chapter describes the Cisco Nexus 1010 commands that begin with the letter X.

xml server max-session

To set the number of allowed XML server sessions, use the xml server max-session command.

xml server max-session sessions

 
Syntax Description

sessions

Maximum number of XML sessions permitted at one time. The range is from 1 to 8.

 
Defaults

The default maximum number of sessions is eight.

 
Command Modes

Global configuration (config)

 
Supported User Roles

network-admin

 
Command History

Release
Modification

4.0(4)SP1(1)

This command was introduced.

Examples

This example shows how to set the number of allowed XML server sessions to 6:

switch# config t
switch# xml server max-session 6
switch#

 
Related Commands

Command
Description

show xml server status

Displays information about XML server settings and any active XML server sessions.

xml server terminate session

Displays information about XML server settings and any active XML server sessions.

xml server timeout

Sets the number of seconds after which an inactive XML server session is terminated.

xml server terminate session

To terminate the specified XML server session, use the xml server terminate session command.

xml server terminate session session-number

 
Syntax Description

session-number

Identifier for an existing XML server session. The range is from 0 to 214748364.

 
Defaults

None

 
Command Modes

Any command mode

 
Supported User Roles

network-admin

 
Command History

Release
Modification

4.0(4)SP1(1)

This command was introduced.

Examples

This example shows how to terminate the XML server session 8665:

switch# xml server terminate 8665
switch#

 
Related Commands

Command
Description

show xml server status

Displays information about XML server settings and any active XML server sessions.

xml server max-session

Sets the number of allowed XML server sessions.

xml server timeout

Sets the number of seconds after which an inactive XML server session is terminated.

xml server timeout

To set the number of seconds after which an inactive XML server session is terminated, use the xml server timeout command.

xml server timeout seconds

 
Syntax Description

seconds

Maximum time that the XML server can remain inactive before session termination. The range is from 0 to 1200 seconds.

 
Defaults

None

 
Command Modes

Global configuration (config)

 
Supported User Roles

network-admin

 
Command History

Release
Modification

4.0(4)SP1(1)

This command was introduced.

Examples

This example shows how to set the XML server timeout to 600 seconds:

switch# config t
switch# xml server timeout 600
switch#

 
Related Commands

Command
Description

show xml server status

Displays information about XML server settings and any active XML server sessions.

xml server max-session

Sets the number of allowed XML server sessions.

xml server terminate session

Displays information about XML server settings and any active XML server sessions.