The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.
This chapter explains how to configure the features that patients and visitors see in Patient View, which is the TV application of Cisco Patient Connect, and care staff see in Care Team View. The Customize page of Admin View allows you to turn these features on or off depending on the hospital’s needs and preferences.
Patient View has dozens of available features. As the administrator, you can control what is shown on the patients’ screens.
You can configure three types of Patient View screens (see table below).
|
|
|
|
---|---|---|---|
|
|||
|
|||
|
By default, all the features are enabled/turned ON, which is indicated by a green check mark icon in the App Status column. The following features can be enabled or disabled on Patient View screens:
As the administrator, you can control the following on the Care Team View screens:
If you want to hide one or more features on either Patient View or Care Team View, follow these steps:
Step 1 Choose the room type such as “Patient Room” or “Waiting Room” from the drop-down menu in the upper right corner of the TV App Customization pane.
Step 2 Select a feature and click either the green or white button in the App Status column to disable the feature (i.e turn the feature OFF). When the white button to the right turns red, the feature is disabled.
To turn that feature back ON, click either button again. When the left button turns green, the feature is enabled.
Step 3 When you are finished with the configuration, click the Save button at the bottom of the screen to save your changes.