The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.
This table summarizes the new and changed feature information for the Cisco IOS XR Routing Configuration Guide for the Cisco XR 12000 Series Router, and tells you where they are documented.
Feature | Description | Introduced/Changed in Release | Where Documented |
---|---|---|---|
EIGRP Multi-Instance |
This feature was introduced. |
Release 5.1 |
Implementing EIGRP chapter Refer Enhanced Interior Gateway Routing Protocol Commands chapter in Cisco IOS XR Routing Command Reference for the Cisco XR 12000 Series Router for information on the commands used for configuring EIGRP Multi-Instance. |
Graceful Restart for OSPFv3 |
This feature was modified. |
Release 5.1 |
Implementing OSPF chapter Refer OSPFv3 Commands chapter in Cisco IOS XR Routing Command Reference for the Cisco XR 12000 Series Router for commands to configure Graceful Restart for OSPFv3. |
OSPFv3 Sham Link Support for MPLS VPN |
This feature was introduced. |
Release 5.1 |
Implementing OSPF chapter OSPFv3 Sham Link Support for MPLS VPN Refer OSPFv3 Commands chapter in Cisco IOS XR Routing Command Reference for the Cisco XR 12000 Series Router for commands to configure OSPFv3 Sham Link Support for MPLS VPN. |