session
To configure global default CLI session parameters, use the session command in the System Admin Config mode.
session {autowizard [false | true] | complete-on-space [false | true] | display-level [display-value] | history size | idle-timeout [timeout-value] | ignore-leading-space [false | true] | paginate [false | true] | prompt1 [string] | prompt2 [string] | show-defaults [false | true]}
Syntax Description
false |
Negates the parameter option. The same parameter will be available for setting it later. |
true |
Sets the parameter option effective. The parameter will be set. |
autowizard |
Automatically queries user for mandatory elements. |
complete-on-space |
Enables or disables completion on space. |
display-level [display-value] |
Specifies maximum depth to show when displaying configuration. The value must be an unsigned long integer and the range is 1 to 64. |
history [size] |
Specifies the history size. The value must be an unsigned long integer and the range is 0 to 8192. |
idle-timeout [timeout-value] |
Specifies the CLI idle-timeout in seconds. The value must be an unsigned long integer and the range is 0 to 8192. |
ignore-leading-space |
Ignores leading whitespace. |
paginate |
Paginates output from CLI commands |
prompt1 [string] |
Prompt for operational mode. |
prompt2 [string] |
Prompt for configure mode. |
show-defaults |
Displays default values when showing the configuration. |
Command Default
None
Command Modes
System Admin Config
Command History
Release | Modification |
---|---|
Release 5.0.0 |
This command was introduced. |
Examples
sysadmin-vm:0_RP0#config
sysadmin-vm:0_RP0(config)#session autowizard true