clear controller fabric
To clear fabric plane information, use the clear controller fabric command in the System Admin EXEC mode.
clear controller fabric {counter | statistics} plane {plane-id | all}
Syntax Description
counter |
Clears the fabric up-down counters information. |
statistics |
Clears the fabric statistics counters information. |
plane |
Clears the fabric plane. |
plane-id |
Specifies the fabric plane number. Range is from 0 to 5. |
all |
Clears the fabric information for all planes |
Command Default
Information for all planes is cleared.
Command Modes
System Admin EXEC
Command History
Release | Modification |
---|---|
Release 5.0.0 |
This command was introduced. |
Usage Guidelines
To view the current status of the counters, execute the show controller fabric plane all command. Later, execute the clear controller fabric command to clear the necessary counter. To view the result of the clear controller fabric command, again execute the show controller fabric plane all command and notice the change.
Examples
sysadmin-vm:0_RP0#show controller fabric plane all
Mon Jul 16 18:57:15.733 UTC
Plane Admin Plane up->dn up->mcast
Id State State counter counter
--------------------------------------
0 UP DN 0 0
1 UP UP 0 23
2 UP UP 0 22
3 UP UP 0 19
4 UP DN 0 0
5 UP DN 0 0
>
sysadmin-vm:0_RP0# clear controller fabric counter plane 2
Mon Jul 16 18:58:08.122 UTC
sysadmin-vm:0_RP0# show controller fabric plane all
Mon Jul 16 18:58:18.654 UTC
Plane Admin Plane up->dn up->mcast
Id State State counter counter
--------------------------------------
0 UP DN 0 0
1 UP UP 0 23
2 UP UP 0 0
3 UP UP 0 19
4 UP DN 0 0
5 UP DN 0 0